Magnetic shape-memory alloy: Magnetic shape-memory alloys (MSMAs), or ferromagnetic shape-memory alloys (FSMAs), are ferromagnetic materials which exhibit large strains under the influence of an applied magnetic field due to martensitic phase transformation. Magnetic shape-memory alloys, with near-stoichiometric Ni2MnGa being the most studied example, differ from other magnetostrictive materials, such as Terfenol-D and Galfenol, as they produce much larger strains by twinning, sometimes as large as 9%, under relatively low bias magnetic fields.Depletion gilding: Depletion gilding is a method for producing a layer of nearly pure gold on an object made of gold alloy by removing the other metals from its surface. It is sometimes referred to as a "surface enrichment" process.Brightray: Brightray is a nickel-chromium alloy that is noted for its resistance to erosion by gas flow at high temperatures. It was used for hard-facing the exhaust valve heads and seats of petrol engines, particularly aircraft engines from the 1930s onwards.Thread-locking fluid: Thread-locking fluid or threadlocker is a thin, single-component adhesive, applied to the threads of fasteners such as screws and bolts to prevent loosening, leakage, and corrosion.Titanium nitrideSpin casting: Spin casting, also known as centrifugal rubber mold casting (CRMC), is a method of utilizing centrifugal force to produce castings from a rubber mold. Typically, a disc-shaped mold is spun along its central axis at a set speed.BrittlenessPalladium(II) chlorideArgentium sterling silver: Argentium silver 935 is a modern sterling silver alloy, containing 93.5% silver, in which the traditional alloy (92.Yunnan Tin: Yunnan Tin Group (Holding) Company Limited (YTC) is the largest tin producer and exporter in China and the world. It is headquartered in Kunming, Yunnan.Surface modification: Surface modification is the act of modifying the surface of a material by bringing physical, chemical or biological characteristics different from the ones originally found on the surface of a material.Electrical resistivity measurement of concrete: Concrete electrical resistivity can be obtained by applying a current into the concrete and measuring the response voltage. There are different methods for measuring concrete resistivity.Alan S. Kornacki: Alan Stanley Kornacki (born May 4, 1952, in Bayonne, New Jersey) is an American geologist and retired Army colonel, currently the Senior Staff Geochemist at Shell International Exploration and Production Inc."...Potassium fluoride on alumina: Potassium fluoride on alumina (KF/Al2O3) is a chemical agent consisting of potassium fluoride and aluminium oxide. It is a base which is used in organic synthesis.Waviness: Waviness is the measurement of the more widely spaced component of surface texture. It is a broader view of roughness because it is more strictly defined as "the irregularities whose spacing is greater than the roughness sampling length".Nickel electroplating: Nickel electroplating is a technique of electroplating a thin layer of nickel onto a metal object. The nickel layer can be decorative, provide corrosion resistance, wear resistance, or used to build up worn or undersized parts for salvage purposes.Metal halides: Metal halides are compounds between metals and halogens. Some, such as sodium chloride are ionic, while others are covalently bonded.Aluminium gallium arsenide: Aluminium gallium arsenide (also aluminum gallium arsenide) (AlxGa1-xAs) is a semiconductor material with very nearly the same lattice constant as GaAs, but a larger bandgap. The x in the formula above is a number between 0 and 1 - this indicates an arbitrary alloy between GaAs and AlAs.Niobium(V) fluoridePoly(methacrylic acid)Surgical stainless steel: Surgical stainless steel is an informal term which refers to certain grades of stainless steel that are used in biomedical applications. The most common "surgical steels" are austenitic 316 stainless and martensitic 440 and 420 stainless steels.Chrome platingDuctility: In materials science, ductility is a solid material's ability to deform under tensile stress; this is often characterized by the material's ability to be stretched into a wire. Malleability, a similar property, is a material's ability to deform under compressive stress; this is often characterized by the material's ability to form a thin sheet by hammering or rolling.Indium halides: There are three sets of indium halides, the trihalides, the monohalides, and several intermediate halides.Bagnold's fluid: Bagnold's fluid refers to a suspension of neutrally buoyant particles in a Newtonian fluid such as water or air. The term is named after Ralph Alger Bagnold, who placed such a suspension in an annular coaxial cylindrical rheometer in order to investigate the effects of grain interaction in the suspension.Platinum nanoparticles: Platinum nanoparticles are usually in the form of a suspension or colloidConductive Polymer / Solvent Systems: Solutions or Dispersions?, Bernhard Wessling, 1996 of submicrometre-size particles of platinum in a fluid, usually water.Ultraviolet photoelectron spectroscopy: Ultraviolet photoelectron spectroscopy (UPS) refers to the measurement of kinetic energy spectra of photoelectrons emitted by molecules which have absorbed ultraviolet photons, in order to determine molecular orbital energies in the valence region.Metallurgy: Metallurgy is a domain of materials science and engineering that studies the physical and chemical behavior of metallic elements, their intermetallic compounds, and their mixtures, which are called alloys. Metallurgy is also the technology of metals: the way in which science is applied to the production of metals, and the engineering of metal components for usage in products for consumers and manufacturers.Suboxide: Suboxides are a class of oxides wherein the electropositive element is in excess relative to the “normal” oxides.Simon, A.A Plague of Lighthouse Keepers: "A Plague of Lighthouse Keepers" is a track from the English band Van der Graaf Generator's fourth album Pawn Hearts (1971). It is a concept piece over 23 minutes long, which comprises the whole B-side of the album.Nordic Institute of Dental Materials: NorwayPorcelain: Porcelain is a ceramic material made by heating materials, generally including kaolin, in a kiln to temperatures between . The toughness, strength and translucence of porcelain, relative to other types of pottery, arises mainly from vitrification and the formation of the mineral mullite within the body at these high temperatures.Archwire: An orthodontic archwire is a wire conforming to the alveolar or dental arch that can be used with dental braces as a source of force in correcting irregularities in the position of the teeth. An archwire can also be used to maintain existing dental positions; in this case it has a retentive purpose.Iron nitride: Iron nitrides are inorganic chemical compounds.Field emission probesThioketoneBoron carbideElectrophilic substitution of unsaturated silanes: Electrophilic substitution of unsaturated silanes involves attack of an electrophile on an allyl- or vinylsilane. An allyl or vinyl group is incorporated at the electrophilic center after loss of the silyl group.White Portland cement: White Taavo Portland cement or white ordinary Portland cement (WOPC) is similar to ordinary, gray Portland cement in all aspects except for its high degree of whiteness. Obtaining this color requires substantial modification to the method of manufacture, and because of this, it is somewhat more expensive than the gray product.Chromium: Chromium is a chemical element with symbol Cr and atomic number 24. It is the first element in Group 6.Sodium polyacrylateCrown (dentistry)Amalgam (chemistry): An amalgam is a substance formed by the reaction of mercury with another metal. Almost all metals can form amalgams with mercury, the notable exceptions being iron, platinum, tungsten, and tantalum.Nanoindenter: A nanoindenter is the main component for indentation hardness tests used in nanoindentation. Since the mid-1970s nanoindentation has become the primary method for measuring and testing very small volumes of mechanical properties.Dynamic strain aging: Although sometimes dynamic strain aging is used interchangeably with the Portevin–Le Chatelier effect (or serrated yielding), dynamic strain aging refers specifically to the microscopic mechanism that induces the Portevin–Le Chatelier effect. This strengthening mechanism is related to solid-solution strengthening and has been observed in a variety of fcc and bcc substitutional and interstitial alloys, metalloids like silicon, and ordered intermetallics within specific ranges of temperature and strain rate.Aluminium toxicity in dialysis patients: Aluminium toxicity is a problem for patients on haemodialysis. The dialysis process does not efficiently remove excess aluminium from the body, so it may build up over time.Copper toxicityEnergy-dispersive X-ray spectroscopy: Energy-dispersive X-ray spectroscopy (EDS, EDX, or XEDS), sometimes called energy dispersive X-ray analysis (EDXA) or energy dispersive X-ray microanalysis (EDXMA), is an analytical technique used for the elemental analysis or chemical characterization of a sample. It relies on an interaction of some source of X-ray excitation and a sample.Cobalt(II) hydroxideMaxwell–Wagner–Sillars polarization: In dielectric spectroscopy, large frequency dependent contributions to the dielectric response, especially at low frequencies, may come from build-ups of charge.CapravirineZirconium phosphate: Zirconium phosphates (zirconium hydrogen phosphate) are acidic, inorganic cation exchange materials that have a layered structure with formula Zr(HPO4)2∙nH2O.Clearfield, A.Poly(methyl methacrylate)Veneer (dentistry): In dentistry, a veneer is a layer of material placed over a tooth, either to improve the aesthetics of a tooth or to protect the tooth's surface from damage. There are two main types of material used to fabricate a veneer: composite and dental porcelain.Abrasion (medical)Liquid junction potential: Liquid junction potential occurs when two solutions of different concentrations are in contact with each other. The more concentrated solution will have a tendency to diffuse into the comparatively less concentrated one.Abutment (dentistry): In dentistry, an abutment is a connecting element. This is used in the context of a fixed bridge (the "abutment teeth" referring to the teeth supporting the bridge), partial removable dentures (the "abutment teeth" referring to the teeth supporting the partial) and in implants (used to attach a crown, bridge, or removable denture to the dental implant fixture).Oil immersionCoelan Marine Coatings: Coelan Marine Coatings area special highly UV-resistant coatings Coelan Application Guide invented by Coelan in 1992 and are used widely in the marine industry as coatings for wood, plastic, metal and fiberglass surfaces.Premapro: Material Data Safety Sheet Coelan Marine Coatings are currently manufactured by Kemper Systems under the brand name COELAN.Magnesium oxide wallboardSelf-cleaning glass: Self-cleaning glass is a specific type of glass with a surface that keeps itself free of dirt and grime.Tufting (composites): In the field of composite materials, tufting is an experimental technology to locally reinforce continuous fibre-reinforced plastics along the z-direction, with the objective of enhancing the shear and delamination resistance of the structure.Electrolysis: In chemistry and manufacturing, electrolysis is a technique that uses a direct electric current (DC) to drive an otherwise non-spontaneous chemical reaction. Electrolysis is commercially highly important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell.CeramicTrioxide: A trioxide is a compound with three oxygen atoms. For metals with the M2O3 formula there are several common structures.Potassium hydrogenacetylenedicarboxylate: Potassium hydrogenacetylenedicarboxylate is a potassium salt with chemical formula KC4HO4 or K+·HC4O4−, often abbreviated as KHadc. It is often called potassium hydrogen acetylenedicarboxylate or monopotassium acetylenedicarboxylate.Surface modification of biomaterials with proteins: Biomaterials are materials that are used in contact with biological systems. Biocompatibility and applicability of surface modification with current uses of metallic, polymeric and ceramic biomaterials allow alteration of properties to enhance performance in a biological environment while retaining bulk properties of the desired device.Osseointegration: Osseointegration derives from the Greek osteon, bone, and the Latin integrare, to make whole. The term refers to the direct structural and functional connection between living bone and the surface of a load-bearing artificial implant.Twist compression tester: The Twist Compression Tester ("TCT") is a hydraulically operated bench-top apparatus used to evaluate the level of friction and/or wear between two materials under lubricated or non-lubricated conditions.Implant stability quotient: The implant stability quotient (ISQ) is the value on a scale that indicates the level of stability and osseointegration in dental implants. The scale ranges from 1 to 100 and is measured by implant stability meters instruments using resonance frequency analysis (RFA) technique.Metals in medicine: Metals in medicine are used in organic systems for diagnostic and treatment purposes. Inorganic elements are also essential for organic life as cofactors in enzymes called Metalloproteins.Bipolar electrochemistry: Bipolar electrochemistry is a phenomenon in electrochemistry based on the polarization of conducting objects in electric fields. Indeed, this polarization generates a potential difference between the two extremities of the substrate that is equal to the electric field value multiplied by the size of the object.Moens–Korteweg equation: In biomechanics, the Moens–Korteweg equation models the relationship between wave speed or pulse wave velocity (PWV) and the incremental elastic modulus of the arterial wall or its distensibility. The equation was derived independently by Adriaan Isebree Moens and Diederik Korteweg.Dropping mercury electrode: The dropping mercury electrode (DME) is a working electrode made of mercury and used in polarography. Experiments run with mercury electrodes are referred to as forms of polarography even if the experiments are identical or very similar to a corresponding voltammetry experiment which uses solid working electrodes.Phosphogypsum: Phosphogypsum refers to the gypsum formed as a by-product of the production of fertilizer from phosphate rock. It is mainly composed of gypsum (CaSO4·2H2O).Chronoamperometry: Chronoamperometry is an electrochemical technique in which the potential of the working electrode is stepped and the resulting current from faradaic processes occurring at the electrode (caused by the potential step) is monitored as a function of time. Limited information about the identity of the electrolyzed species can be obtained from the ratio of the peak oxidation current versus the peak reduction current.Blue colour works: A blue colour works () is a paintworks where blue paint for use in glassmaking is produced. Usually the pigment, cobalt blue, needed for this purpose, was manufactured from cobalt-containing ore as in the case of the factories listed below.Friction burnCorona treatment: Corona treatment (sometimes referred to as air plasma) is a surface modification technique that uses a low temperature corona discharge plasma to impart changes in the properties of a surface. The corona plasma is generated by the application of high voltage to an electrode that has a sharp tip.Powder diffraction: Powder diffraction is a scientific technique using X-ray, neutron, or electron diffraction on powder or microcrystalline samples for structural characterization of materials.B.
Download our free solidary book to support research on VHL disease