Poly(methacrylic acid)Poly(methyl methacrylate)PolyhydroxyethylmethacrylateSingle bondAcrylate: Acrylates are the salts, esters, and conjugate bases of acrylic acid and its derivatives. They are also known as propenoates (since acrylic acid is also known as 2-propenoic acid).Sodium polyacrylateBrittlenessNordic Institute of Dental Materials: NorwayLiving free-radical polymerization: Living free radical polymerization is a type of living polymerization where the active polymer chain end is a free radical. Several methods exist.Adapalene/benzoyl peroxidePolymer blend: A polymer blend or polymer mixture is a member of a class of materials analogous to metal alloys, in which at least two polymers are blended together to create a new material with different physical properties. Section 3.Nanopin film: Nanopin film is an experimental material in nanotechnology developed in 2005 with unusual superhydrophobic properties . A droplet of water makes contact with the surface of this film and forms an almost perfect sphere with a contact angle of 178°.Surface modification: Surface modification is the act of modifying the surface of a material by bringing physical, chemical or biological characteristics different from the ones originally found on the surface of a material.Polyamide: A polyamide is a macromolecule with repeating units linked by amide bonds.Palmer, R.Sandcastle worm: The sandcastle worm (Phragmatopoma californica), also called the honeycomb worm or honeycomb tube worm, is a reef-forming marine polychaete worm belonging to the family Sabellarididae. It is dark brown in color with a crown of lavender tentacles and has a length of up to about .Tufting (composites): In the field of composite materials, tufting is an experimental technology to locally reinforce continuous fibre-reinforced plastics along the z-direction, with the objective of enhancing the shear and delamination resistance of the structure.Surface modification of biomaterials with proteins: Biomaterials are materials that are used in contact with biological systems. Biocompatibility and applicability of surface modification with current uses of metallic, polymeric and ceramic biomaterials allow alteration of properties to enhance performance in a biological environment while retaining bulk properties of the desired device.Siloxane: A siloxane is a functional group in organosilicon chemistry with the Si–O–Si linkage. The parent siloxanes include the oligomeric and polymeric hydrides with the formulae H(OSiH2)nOH and (OSiH2)n.Electrophilic substitution of unsaturated silanes: Electrophilic substitution of unsaturated silanes involves attack of an electrophile on an allyl- or vinylsilane. An allyl or vinyl group is incorporated at the electrophilic center after loss of the silyl group.White Portland cement: White Taavo Portland cement or white ordinary Portland cement (WOPC) is similar to ordinary, gray Portland cement in all aspects except for its high degree of whiteness. Obtaining this color requires substantial modification to the method of manufacture, and because of this, it is somewhat more expensive than the gray product.Moisture cure polyurethane: Moisture-cure polyurethanes or polyurethane prepolymer are isocyanate-terminated prepolymers that are formulated to cure with ambient water. Cured PURs are segmented copolymer polyurethane-ureas exhibiting microphase-separated morphologies.Ganoine: Ganoine or ganoin is a glassy, often multi-layered mineralized tissue that covers the scales, cranial bones and fin rays in some basal ray-finned fishes. It is composed of rod-like, pseudoprismatic apatite crystallites, with less than 5% of organic matter.Plastination: Plastination is a technique or process used in anatomy to preserve bodies or body parts, first developed by Gunther von Hagens in 1977. The water and fat are replaced by certain plastics, yielding specimens that can be touched, do not smell or decay, and even retain most properties of the original sample.Denturist: A Denturist in the United States and Canada, clinical dental technician in the UK or (in Australia) a dental prosthetist, is a member of the oral health care team who provides an oral health examination, takes impressions of the surrounding oral tissues, constructs and delivers removable oral prosthesis (dentures and partial dentures) directly to the patient.American Academy of denturitry.Metal halides: Metal halides are compounds between metals and halogens. Some, such as sodium chloride are ionic, while others are covalently bonded.Dentin sialophosphoprotein (protein): Dentin sialophosphoprotein is the only protein produced uniquely by odontoblasts, the cells that produce tooth dentin. It is a non-collagenous SIBLING protein that is later cleaved into three functional proteins: dentin phosphoprotein (also known as phosphophoryn), taken from the C-terminal end, dentin sialoprotein from the N-terminal end, and dentin glycoprotein from the middle of the molecule.Thermogravimetry: Thermogravimetry (also known by the acronym "TG"; alternative spellings include thermo-gravimetry and thermogravimmetry) is a branch of physical chemistry, materials research, and thermal analysis. It is based on continuous recording of mass changes of a sample of material, as a function of a combination of temperature with time, and additionally of pressure and gas composition.Alkyl cycloalkaneTear resistance: In simpler terms tear resistance (or tear strength) is a measure of how well a material can withstand the effects of tearing.NAHAD GLOSSARY, http://www.Ultraviolet photoelectron spectroscopy: Ultraviolet photoelectron spectroscopy (UPS) refers to the measurement of kinetic energy spectra of photoelectrons emitted by molecules which have absorbed ultraviolet photons, in order to determine molecular orbital energies in the valence region.Three-body forceFerroelectric polymers: Ferroelectric Polymers"Ferroelectric Properties of Vinylidene Fluoride Copolymers," by T. Furukawa, in Phase Transitions, Vol.Ductility: In materials science, ductility is a solid material's ability to deform under tensile stress; this is often characterized by the material's ability to be stretched into a wire. Malleability, a similar property, is a material's ability to deform under compressive stress; this is often characterized by the material's ability to form a thin sheet by hammering or rolling.Bearing modulus: Bearing modulus is a [used in journal bearing] design. It is a [[Dimensionless quantity|dimensionless number.PolystyreneField emission probesPEGylationLower critical solution temperature: The lower critical solution temperature (LCST) or lower consolute temperature is the critical temperature below which the components of a mixture are miscible for all compositions. The word lower indicates that the LCST is a lower bound to a temperature interval of partial miscibility, or miscibility for certain compositions only.Outline of water: The following outline is provided as an overview of and topical guide to water:Logarithmic form: In contexts including complex manifolds and algebraic geometry, a logarithmic differential form is a meromorphic differential form with poles of a certain kind.Filler metal: A filler metal is a metal added in the making of a joint through welding, brazing, or soldering.DimethylanilineAdsorptionBorosilicate glass: Borosilicate glass is a type of glass with silica and boron trioxide as the main glass-forming constituents. Borosilicate glasses are known for having very low coefficients of thermal expansion (~3 × 10−6 /°C at 20 °C), making them resistant to thermal shock, more so than any other common glass.Electrical resistivity measurement of concrete: Concrete electrical resistivity can be obtained by applying a current into the concrete and measuring the response voltage. There are different methods for measuring concrete resistivity.NanotoughHelen Keller National CenterSelf-cleaning glass: Self-cleaning glass is a specific type of glass with a surface that keeps itself free of dirt and grime.Biofouling: Biofouling or biological fouling is the accumulation of microorganisms, plants, algae, or animals on wetted surfaces. Such accumulation is referred to as epibiosis when the host surface is another organism and the relationship is not parasitic.Microfluidic whole genome haplotyping: Microfluidic whole genome haplotyping is a technique for the physical separation of individual chromosomes from a metaphase cell followed by direct resolution of the haplotype for each allele.Cement: A cement is a binder, a substance that sets and hardens and can bind other materials together. The word "cement" can be traced back to the Roman term opus caementicium, used to describe masonry resembling modern concrete that was made from crushed rock with burnt lime as binder.Streptococcus mitis: Streptococcus mitis, previously known as Streptococcus mitior, is a mesophilic alpha-hemolytic species of Streptococcus that inhabits the human mouth. It is most commonly found in the throat, nasopharynx, and mouth.Boiling points of the elements (data page): == Boiling point ==Diffuse reflectance infrared fourier transform: Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS)C.-P.Argentium sterling silver: Argentium silver 935 is a modern sterling silver alloy, containing 93.5% silver, in which the traditional alloy (92.Intraocular lens power calculation: The aim of an accurate intraocular lens power calculation is to provide an intraocular lens (IOL) that fits the specific needs and desires of the individual patient. The development of better instrumentation for measuring the eye's axial length (AL) and the use of more precise mathematical formulas to perform the appropriate calculations have significantly improved the accuracy with which the surgeon determines the IOL power.Brown's syndromePorosity: Porosity or void fraction is a measure of the void (i.e.TypodontBoron carbidePolyester resin: Polyester resins are unsaturated synthetic resins formed by the reaction of dibasic organic acids and polyhydric alcohols. Polyester resins are used in sheet moulding compound, bulk moulding compound and the toner of laser printers.Gran Classico Bitter: Gran Classico Bitter is an alcoholic apéritif/digestif (28% alcohol - 56 proof) created following the "Italian Bitter of Turin" recipe dating from the 1860s. This recipe, which was originally produced under the name Torino Gran Classico, had been purchased in 1925 from a Turin-based distillery by the small Swiss distillery E.Charged Aerosol Release Experiment: The Charged Aerosol Release Experiment also known as CARE, is a project run by NASA which will use a rocket to release dust in the upper atmosphere to form a dusty plasma in space. NASA plans to trigger cloud formation around the rocket's exhaust particles.Octacalcium phosphateSoft lithography: In technology, soft lithography refers to a family of techniques for fabricating or replicating structures using "elastomeric stamps, molds, and conformable photomasks".In the words of Rogers and Nuzzo, p.Microfluidics: Microfluidics is a multidisciplinary field intersecting engineering, physics, chemistry, biochemistry, nanotechnology, and biotechnology, with practical applications to the design of systems in which low volumes of fluids are processed to achieve multiplexing, automation, and high-throughput screening. Microfluidics emerged in the beginning of the 1980s and is used in the development of inkjet printheads, DNA chips, lab-on-a-chip technology, micro-propulsion, and micro-thermal technologies.Reactive-ion etching: Reactive-ion etching (RIE) is an etching technology used in microfabrication. RIE is a type of dry etching which has different characteristics than wet etching.Bulk micromachining: Bulk micromachining is a process used to produce micromachinery or microelectromechanical systems (MEMS).Gelatin silver process: The gelatin silver process is the photographic process used with currently available black-and-white films and printing papers. This is one of the many ways of producing a photograph.
Download our free solidary book to support research on VHL disease