모담

Explore the research topics touched on by this project. These labels are generated based on the underlying awards/grants. Together they form a unique fingerprint ...

Melt blowing is a conventional fabrication method of micro- and nanofibers where a polymer melt is extruded through small ... Heres an overview of how melt blowing works: Melt Extrusion: The process begins with a polymer resin being melted and extruded ... Ellison CJ, Phatak A, Giles DW, Macosko CW, Bates FS (2007). "Melt blown nanofibers: Fiber diameter distributions and onset of ... The same phenomenon applies for melt blowing of polymers. The first research on melt blowing was a naval attempt in the US to ...

All electrospun nanofibers showed smooth, uniform, and bead-free surfaces. Their functional groups were detected by ATR-FTIR ... The PCL/GEL/0.18%PE and PCL/GEL/0.36%PE electrospun nanofibers inhibited bacterial activity at around 6 ± 0.1% and 23 ± 0.3% ... With PE addition, the electrospun nanofibers exhibited an increase in their wettability and degradation rates over time and a ... In vitro cell studies showed that PE-loaded electrospun nanofibers enhanced HaCaT cell growth, attachment, and proliferation, ...

SHEAR AND EXTENSIONAL RHEOLOGY OF CARBON NANOFIBER/POLYSTYRENE MELT COMPOSITES Koki Miyazono , Christopher D. Kagarise , Monon ... The rheological behavior and morphology of polystyrene / carbon nanofiber (PS/CNF) composites in their melt phase have been ... A highly instrumented extruder was used to study how the impact modifier affects solids conveying, melting, melt conveying and ... It was found while added appropriate content of PE in PC formulations, melt viscosity and strength of the mixture could ...

... carefully choosing a temperature between the melting temperature of polymer A and polymer B to melt the composite without ... Because of the large surface to volume ratio, the nano-fibers tend to agglomerate. The well-established methods usually ... Inducing chemical cross-linking is proven to be another effective way to improve the melt strength of PP. However, the cross- ... In the quad screw extruder, the lower melt temperatures and greater shear allowed better mixing at higher screw speeds than the ...

... practical technology for fabricating tiny nanofibers has been developed by bioengineers. The reference to the fairground treat ... When spun, the material stretches much like molten sugar does as it begins to dry into thin, silky ribbons. Just as in cotton ... Centrifugal Multispun Nanofibers Put a New Spin on COVID-19 Masks. Apr. 12, 2021 Researchers have developed a novel nanofiber ... Inspired by a cotton candy machine, engineers put a new spin on creating tiny nanofibers. Date:. May 25, 2010. Source:. Harvard ...

A method for producing a fiber membrane of nanofibers that have both smooth and porous surface features. The method includes ... materials processing using polymer mixes with solvents and melt polymers with additives. The method includes nanomaterial ...

Chitin nanocrystals and nanofibers as nano-sized fillers into thermoplastic starch-based biocomposites processed by melt-mixing ... Processing of chitin nanofibers by dynamic high pressure homogenization: Characterization and antifungal activity against A. ...

Schematic of design and fabrication process of hollow carbon nanofibers/sulfur composite structure. Credit: ACS, Zheng et al. ... comprising vertical arrays of hollow carbon nanofibers filled with melted sulfur. -Zheng et al. ... The small dimension of the nanofibers provides a large surface area per unit mass for Li2S deposition during cycling and ... Stanford team demonstrates hollow carbon nanofiber-encapsulated sulfur cathode for high-capacity Li-S batteries 21 September ...

Carbon Nanofiber Applications & Properties. Pyrograf®-III vapor-grown carbon nanofibers are within the class of materials ... Literature values for the glass transition temperature, (Tg), and melting temperature, (Tm), are given for the more common ... Thermal Transitions of Homopolymers: Glass Transition & Melting Point. ...

W. Han, X. Wang and G. S. Bhat, "Structure and Air Permeability of Melt Blown Nanofiber Webs," Journal of Nanomaterials and ... W. Han, X. Wang and G. S. Bhat, "Investigation of the Nanofiber Breakup in the Melt Blowing Process," Industrial and ... W. Han, X. Wang and G. S. Bhat, "Investigation of the Nanofiber Breakup in the Melt Blowing Process," Industrial and ... N. Hiremath and G. Bhat, "Melt blown Polymeric Nanofibers for Medical Applications-An Overview" Nanosci Technol 2(1): pp 1-9 ( ...

Electrospinning, Nozzle-less, Nanofibers, Producing method, Polyacrylonitrile. Introduction. Nanofibers are of great importance ... However, electro spinning production rate is limited by the rate at which the polymer solution or melt is fed to a single jet [ ... uniform nanofiber distribution on the collector, and increase production rate. The produced nanofibers were compared with those ... They showed that from a 13 cm long tube with 20 holes, 0.3-0.5 g/h of nanofiber could be produced [22]. The jetting from free ...

Electrospinning has emerged as one of the potential techniques for producing nanofibers. The use of electrospun nanofibers in ... Moreover, it serves to highlight and capture the contemporary progress of electrospinning techniques (solution and melt) with ... Electrospinning has emerged as one of the potential techniques for producing nanofibers. The use of electrospun nanofibers in ... The nanofibers were electrospun with the diluted mixture (7:3) of aqueous acetic acid (90% v/v) and formic acid solution (90% v ...

Determination of the average length of polymer nanofibers in suspension and study of the universal behavior of nanofibers of ... Shear stress transfer from the melt to the PTFE crystal results in solid phase plastic deformation, and the efficiency of the ... A network of poly(tetrafluoroethylene) (PTFE) microfibers in a thermoplastic polyurethane (TPU) was prepared by melt mixing the ... Inverse Rheological Methods for the Determination of Polymer Structures, Diffusion of Small Molecules and Nanofiber Lengths. ...

Melt-compounding. , Mixing process. , Nano-carbon particles. , Nanocomposite systems. , Nanofiber composites. , Processability ... These systems consisted of a dispersion of carbon nanotubes (CNTs) and carbon nanofibers (CNFs) in a polypropylene (PP) matrix ... The mixing process was carried out by melt compounding with a twin-screw corotating extruder with different reinforcement ... Allaoui, A., Hoa, S. V., & Pugh, M. D. (2008). The electronic transport properties and microstructure of carbon nanofiber/epoxy ...

Nanofibers. Edited by: Ashok Kumar. ISBN 978-953-7619-86-2, PDF ISBN 978-953-51-4560-8, Published 2010-02-01 ... melt fibrillation, template synthesis, electro-spinning, and solution spinning. They reduce the handling problems mostly ... Nanofibers are continuous filaments of generally less than about 1000 nm diameters. Nanofibers of a variety of cellulose and ... 5. Diversity of Nanofibers from Electrospinning: from Graphitic Carbons to Ternary Oxides. By Yu Wang, Idalia Ramos and Jorge J ...

... carbon nanofiber melt-processed composites more Polymers 14 (2022) Article Number: 4803 ... Krause, B. ; Pötschke, P. Polyethylene glycol as additive to achieve n-conductive melt-mixed polymer/carbon nanotube composites ...

Nanofibers are formed and collected as a web on a grounded collector under vacuum created by vacuum chamber and blower. For ... A 1200 g/10 min melt water flow rate polypropylene was meltblown using a modular die as described in U.S. Pat. No. 6,114,017. ... A preferred linear high-density polyethylene has an upper limit melting range of about 130° C. to 140° C., a density in the ... Example 7 is a polyether sulfone nanofiber based nonwoven sheet made by an electroblowing process as described in WO 03/080905 ...

Flexible substrates made of micro and nano-fibers with high surface areas find practical bioapplications as scaffolds for ... Electrospinning is a highly versatile method that, through processing of polymeric solutions or melts, produces fibers with ... Project: BioFibPlas - Bioactive Nanofibers Prepared by Electrospinning and Plasma Technologies. Person in Charge: doc. Mgr. ...

... and tensile behaviors of Sn-Ag alloy reinforced with copper-coated carbon nanofibers produced by the melting and casting route ... 학술회의] 이형우, 안병민, 이준배, 이한성, Selective laser melting(SLM) 공정의 laser scan speed 조절을 통한 Ti-6Al-4V 합금의 기공 제어 및 기계적 물성과의 상관관계 연구 , ... 학술회의] ASHUTOSH SHARMA, 안병민, 오민석, 김유환, Electrochemical Corrosion Behavior of Selective Laser Melted Ti-6Al-4V Alloy in 3.5 wt.% ... Exploration of the effect of electrolyte pH on the corrosion resistance of selective laser melted Ti-6Al-4V , 한국분말야금학회 2019년 ...

Nanofiber Material Children Mask. * Nanofiber Membrane Replace Melt-Blown Fabric Ma.... * low price mask filtration material ...

... aerospace industry standards by achieving an AS9100c certification that will allow the company to further develop nanofibre ... New Zealand company Revolution Fibres has become the first nanofibre producer to meet ... Revolution Fibres electro-spinning technology creates nanofibre out of a range of materials including high melt temperature ... "Revolution Fibres started the nanofibre revolution in New Zealand five years ago with a goal to grow the nanofibre export ...

Melt-blown Nanofibers?. John Hagewood of Hills Inc defined nanofibers as fibers less than a micron in diameter and pointed out ... Melt-spinning polymers gave better results than solvent-spinning. Attempts to make a bicomponent sheath-core nanofiber resulted ... Nanofiber sandwiches. Kristine Graham of Donaldson Co. Inc. said that nanofiber webs were impossible to handle and so had to be ... Electrospun Biodegradable Nanofibers. Dr Gisela Buschle-Diller of Auburn University defined nanofibers as fibers with a ...

PET Recycling of Used Bottle Grade Poly Ethyleneterephthalate to Nanofibers by Melt-electrospinning Method [Volume 3, Issue 4, ... Disposal Bottle Recycling of Used Bottle Grade Poly Ethyleneterephthalate to Nanofibers by Melt-electrospinning Method [Volume ... Nonofiber Recycling of Used Bottle Grade Poly Ethyleneterephthalate to Nanofibers by Melt-electrospinning Method [Volume 3, ... Polymers Recycling of Used Bottle Grade Poly Ethyleneterephthalate to Nanofibers by Melt-electrospinning Method [Volume 3, ...

Development of micro-fibre or nano-fibre media is made possible by means of sophisticated spinning and melt blown processes. ... which are essential for the production of ultra-fine fibres are prevented from being blocked by particles or gels by melt ...

The drawing chamber draws the melted raw fiber by using the first drawing gas stream and the second drawing gas stream which ... unit on which the nozzle portion is installed irradiates a laser light to the raw fiber delivered from first jet outlet to melt ... The present invention more particularly applies to nanofiber spinning by a laser drawing method in which raw fibers are melted ... The formed nanofibers are turned into a sheet on the net conveyor 39 to produce the nanofiber nonwoven fabric 41. ...

Nanofiber layer. Nano fiber network distribution, stronger protection.. Melt blown cloth. Effective filtration of smaller ...