Asbestos
Asbestos, Serpentine
Asbestos, Amphibole
Asbestos, Amosite
Mesothelioma
Mineral Fibers
Pleural Diseases
Pleural Neoplasms
Pleura
Occupational Exposure
Mining
Talc
Environmental Exposure
Ships
Air Pollutants, Occupational
Lung
Manufactured Materials
Industry
Zeolites
Neoplasms, Mesothelial
Pulmonary Fibrosis
Silicic Acid
Montana
Carcinogens
Silicon Dioxide
Quartz
Pneumoconiosis
Inhalation Exposure
Respiratory Tract Neoplasms
Microscopy, Phase-Contrast
The European mesothelioma epidemic. (1/1116)
Projections for the period 1995-2029 suggest that the number of men dying from mesothelioma in Western Europe each year will almost double over the next 20 years, from 5000 in 1998 to about 9000 around 2018, and then decline, with a total of about a quarter of a million deaths over the next 35 years. The highest risk will be suffered by men born around 1945-50, of whom about 1 in 150 will die of mesothelioma. Asbestos use in Western Europe remained high until 1980, and substantial quantities are still used in several European countries. These projections are based on the fit of a simple age and birth cohort model to male pleural cancer mortality from 1970 to 1989 for six countries (Britain, France, Germany, Italy, The Netherlands and Switzerland) which together account for three-quarters of the population of Western Europe. The model was tested by comparing observed and predicted numbers of deaths for the period 1990-94. The ratio of mesothelioma to recorded pleural cancer mortality has been 1.6:1 in Britain but was assumed to be 1:1 in other countries. (+info)Macrophage plasminogen activator: induction by asbestos is blocked by anti-inflammatory steroids. (2/1116)
Intraperitoneal injection of asbestos fibres into mice induces the formation of exudates containing macrophages that produce plasminogen activator. Like-wise, in vitro addition of asbestos to macrophage cultures stimulates plasminogen activator secretion; the synthesis and secretion of lysozyme and lysosomal enzymes are not changed under these conditions. The enhanced secretion of plasminogen activator by macrophages exposed to asbestos is suppressed by low concentrations of anti-inflammatory steroids. (+info)A historical cohort mortality study of workers exposed to asbestos in a refitting shipyard. (3/1116)
To investigate the risks of developing asbestos-related diseases we conducted a historical cohort mortality study on 249 ship repair workers (90 laggers and 159 boiler repairers) in a single U.S. Navy shipyard in Japan. We successfully identified the vital status of 87 (96.7%) laggers and 150 (94.3%) boiler repairers, and, of these, 49 (56.3%) and 65 (43.3%) died, respectively, during the follow-up period from 1947 till the end of 1996. Our in-person interviews with some of the subjects clarified that asbestos exposure was considered to be substantially high in the 1950-60s, decreased thereafter gradually but remained till 1979 in the shipyard. The laggers, who had handled asbestos materials directly, showed a significantly elevated SMR of 2.75 (95% C.I.: 1.08-6.48) for lung cancer. The risk developing the disease was greater in the laggers after a 20-year latency (SMR = 3.42). Pancreatic cancer yielded a greater SMR than unity (7.78, 90% C.I.: 2.07-25.19) in a longer working years group. Four laggers died from asbestosis. The boiler repairers, who had many chances for secondary exposure to asbestos and a few for direct exposure, showed no elevation of the SMR of lung cancer overall, but there was a borderline statistically significant SMR of 2.41 (90% C.I.: 1.05-5.45) in a longer working years group. One boiler repairer died from mesothelioma and four from asbestosis. (+info)Reduced tumor necrosis factor-alpha and transforming growth factor-beta1 expression in the lungs of inbred mice that fail to develop fibroproliferative lesions consequent to asbestos exposure. (4/1116)
Tumor necrosis factor (TNF)-alpha and transforming growth factor (TGF)-beta mRNA and protein expression and the degree of fibroproliferative response to inhaled asbestos fibers are clearly reduced in the 129 inbred mouse strain as compared with typical fibrogenesis observed in the C57BL/6 inbred strain. The C57BL/6 mice showed prominent lesions at bronchiolar-alveolar duct (BAD) junctions where asbestos fibers deposit and responding macrophages accumulate. The 129 mice, however, were generally indistinguishable from controls even though the numbers of asbestos fibers deposited in the lungs of all exposed animals were the same. Quantitative morphometry of H&E-stained lung sections comparing the C57BL/6 and 129 mice showed significantly less mean cross-sectional area of the BAD junctions in the 129 animals, apparent at both 48 hours and 4 weeks after exposure. In addition, fewer macrophages had accumulated at these sites in the 129 mice. Nuclear bromodeoxyuridine immunostaining demonstrated that the number of proliferating cells at first alveolar duct bifurcations and in adjacent terminal bronchioles was significantly reduced in the 129 strain compared with C57BL/6 mice at 48 hours after exposure (P < 0.01). TNF-alpha and TGF-beta1 gene expression, as measured by in situ hybridization, was reduced in the 129 mice at 48 hours after exposure, and expression of TNF-alpha and TGF-beta1 protein, as measured by immunohistochemistry, was similarly reduced or absent in the 129 animals. We postulate that the protection afforded the 129 mice is related to reduction of growth factor expression by the bronchiolar-alveolar epithelium and lung macrophages. (+info)A retired shipyard worker with rapidly progressive pulmonary interstitial fibrosis. (5/1116)
We present a case of progressive interstitial fibrosis in a retired shipyard worker who was exposed to asbestos during the postwar era of the late 1940s and 1950s, when asbestos exposures in the workplace were not regulated. Forty years later, at 63 years of age, the patient presented with restrictive lung disease. The patient was diagnosed with asbestos-related pleural disease and parenchymal asbestosis. He remained stable for the next 7 years, but then he began to manifest rapid clinical progression, which raised the possibility of an unusual variant of asbestosis, a concomitant interstitial process, or an unrelated disease. Lung biopsy was not undertaken because of the patient's low pulmonary reserve and limited treatment options. An empiric trial of oral steroids was initiated, but his pulmonary status continued to deteriorate and he died of pulmonary failure at 72 years of age. Many diseases result in pulmonary interstitial fibrosis. Ideally, open lung biopsy should be performed, but this procedure inevitably causes complications in many patients with end-stage restrictive lung disease. Furthermore, while the presence of asbestos bodies in tissue sections is a sensitive and specific marker of asbestos exposure, neither this finding nor any other charge is a marker indicative of asbestosis or the severity of asbestosis. With the enactment of the Asbestos Standard in the United States, asbestos exposures have been decreasing in this country. However, industries that produce asbestos products and wastes continue to expand in developing countries. Prevention of asbestos-related lung disease should be a global endeavor, and asbestos exposures should be regulated in both developed and developing countries. (+info)Magnetic resonance appearance of asbestos-related benign and malignant pleural diseases. (6/1116)
OBJECTIVES: This study describes the magnetic resonance findings of benign and malignant pleural diseases in asbestos-exposed subjects. METHODS: Thirty patients with a history of asbestos exposure and pleural lesions in chest X-rays and computed tomography scans were examined with a 0.5- and a 1.5-T magnetic resonance unit. The examination protocol included cardiac-gated proton density and T2-weighted images, unenhanced and enhanced (Gd-DTPA; 0.1 mmol/ kg) T1-weighted images in the axial plane and sometimes in another orthogonal plane (sagittal or coronal or both). All the magnetic resonance images were reviewed by 3 experienced observers, who visually evaluated morphologic features, signal intensity, and contrast enhancement of pleural lesions. The diagnosis was established by means of percutaneous biopsy, thoracotomy, and combined clinical and radiological follow-up for at least 3 years. RESULTS: Eighteen patients affected with multiple pleural plaques showed low signal intensity on both unenhanced and enhanced T1-weighted and proton density and T2-weighted images. In 2 of these patients an acute pleural effusion was observed. All the malignant lesions (11 mesotheliomas) and a solitary benign pleural plaque revealed high signal intensity on the proton density and T2-weighted images and inhomogeneous contrast enhancement in the postcontrast T1-weighted images. The sensitivity, specificity, and diagnostic accuracy of the magnetic resonance imaging in classifying a lesion as suggestive of malignancy were 100%, 95% and 97%, respectively. CONCLUSIONS: The results point out 2 magnetic resonance signal intensity patterns for asbestos-related pleural lesions: (i) low-signal intensity on unenhanced and enhanced T1-weighted and proton density and T2-weighted images for benign plaques and (ii) nonhomogeneous hyperintensity in T2-weighted and enhanced T1-weighted images for malignant mesotheliomas. (+info)Environmental pathology: new directions and opportunities. (7/1116)
The National Institute of Environmental Health Sciences (NIEHS) supports a number of training programs for predoctoral and postdoctoral (D.V.M., M.D., Ph.D.) fellows in toxicology, epidemiology and biostatistics, and environmental pathology. At the Experimental Biology meeting in April 1997, the American Society of Investigative Pathology (ASIP) sponsored a workshop including directors, trainees, and other interested scientists from several environmental pathology programs in medical and veterinary colleges. This workshop and a related session on "Novel Cell Imaging Techniques for Detection of Cell Injury" revealed advances in molecular and cell imaging approaches as reviewed below that have a wide applicability to toxicologic pathology. (+info)Asbestos induces activator protein-1 transactivation in transgenic mice. (8/1116)
Activation of activator protein (AP-1) by crocidolite asbestos was examined in vitro in a JB6 P+ cell line stably transfected with AP-1-luciferase reporter plasmid and in vivo using AP-1-luciferase reporter transgenic mice. In in vitro studies, crocidolite asbestos caused a dose- and time-dependent induction of AP-1 activation in cultured JB6 cells. The elevated AP-1 activity persisted for at least 48 h. Crocidolite asbestos also induced AP-1 transactivation in the pulmonary and bronchial tissues of transgenic mice. AP-1 activation was observed at 2 days after intratracheal instillation of the mice with asbestos. At 3 days postexposure, AP-1 activation was elevated 10-fold in the lung tissue and 22-fold in bronchiolar tissue as compared with their controls. The induction of AP-1 activity by asbestos appeared to be mediated through the activation of mitogen-activated protein kinase family members, including extracellular signal-regulating protein kinase, Erk1 and Erk2. Aspirin inhibited asbestos-induced AP-1 activity in JB6 cells. Pretreatment of the mice with aspirin also inhibited asbestos-induced AP-1 activation in bronchiolar tissue. The data suggest that further investigation of the role of AP-1 activation in asbestos-induced cell proliferation and carcinogenesis is warranted. In addition, investigation of the potential therapeutic benefits of aspirin in the prevention/amelioration of asbestos-induced cancer is justified. (+info)Asbestos is a group of naturally occurring mineral fibers that are resistant to heat, chemical reactions, and electrical currents. There are six types of asbestos, but the most common ones are chrysotile, amosite, and crocidolite. Asbestos has been widely used in various construction materials, such as roofing shingles, ceiling and floor tiles, paper products, and cement products.
Exposure to asbestos can cause serious health problems, including lung cancer, mesothelioma (a rare form of cancer that affects the lining of the lungs, heart, or abdomen), and asbestosis (a chronic lung disease characterized by scarring of the lung tissue). These health risks are related to the inhalation of asbestos fibers, which can become lodged in the lungs and cause inflammation and scarring over time.
As a result, the use of asbestos has been heavily regulated in many countries, and its use is banned in several others. Despite these regulations, asbestos remains a significant public health concern due to the large number of buildings and products that still contain it.
'Asbestos, serpentine' is a type of asbestos mineral that belongs to the serpentine group of minerals. The serpentine group of minerals is characterized by its sheet or layered structure, in which each silicate tetrahedron shares three oxygen atoms with adjacent tetrahedra, forming a continuous two-dimensional sheet.
The most common type of asbestos mineral in the serpentine group is chrysotile, also known as white asbestos or serpentine asbestos. Chrysotile fibers are curly and flexible, which makes them easier to weave into textiles and other materials. As a result, chrysotile has been widely used in a variety of industrial and commercial applications, such as insulation, roofing, flooring, and cement products.
However, exposure to chrysotile fibers has been linked to several serious health problems, including lung cancer, mesothelioma, and asbestosis. As a result, the use of chrysotile and other types of asbestos has been banned or restricted in many countries around the world.
Crocidolite is a type of asbestos, which is a naturally occurring fibrous mineral that was widely used in various industrial and commercial applications due to its heat resistance, insulating properties, and strength. Crocidolite, also known as blue asbestos, is made up of fine, straight fibers that can be easily inhaled and become lodged in the lungs.
Prolonged exposure to crocidolite fibers has been linked to serious health problems, including lung cancer, mesothelioma (a rare form of cancer that affects the lining of the lungs and abdomen), and asbestosis (a chronic lung disease characterized by scarring and inflammation of the lung tissue). As a result, the use of crocidolite and other forms of asbestos has been largely banned in many countries.
It is important to note that there is no safe level of exposure to asbestos, and any contact with this mineral should be avoided. If you suspect that you have been exposed to asbestos, it is recommended that you seek medical advice from a healthcare professional.
Amphibole asbestos is a type of asbestos mineral that includes several subtypes such as tremolite, actinolite, and crocidolite. These minerals have double-chain structures and are typically composed of iron and magnesium ions. Amphibole asbestos fibers are straight or slightly curved, and they are more brittle than chrysotile (white asbestos) fibers.
Amphibole asbestos is known to be more hazardous to human health than chrysotile asbestos because it is more easily inhaled and can penetrate deeper into the lungs. Amphibole asbestos has been linked to an increased risk of lung cancer, mesothelioma, and other respiratory diseases. Its use has been banned or restricted in many countries due to these health concerns.
Amosite is a type of asbestos also known as "brown asbestos." It is a fibrous mineral that was commonly used in insulation and other building materials due to its heat resistance and fireproof properties. Prolonged exposure to amosite fibers can cause serious health issues, including lung cancer, mesothelioma, and asbestosis. The use of amosite has been banned in many countries due to these health risks.
Mesothelioma is a rare and aggressive form of cancer that develops in the mesothelial cells, which are the thin layers of tissue that cover many of the internal organs. The most common site for mesothelioma to occur is in the pleura, the membrane that surrounds the lungs. This type is called pleural mesothelioma. Other types include peritoneal mesothelioma (which occurs in the lining of the abdominal cavity) and pericardial mesothelioma (which occurs in the lining around the heart).
Mesothelioma is almost always caused by exposure to asbestos, a group of naturally occurring minerals that were widely used in construction, insulation, and other industries because of their heat resistance and insulating properties. When asbestos fibers are inhaled or ingested, they can become lodged in the mesothelium, leading to inflammation, scarring, and eventually cancerous changes in the cells.
The symptoms of mesothelioma can take many years to develop after exposure to asbestos, and they may include chest pain, coughing, shortness of breath, fatigue, and weight loss. Treatment options for mesothelioma depend on the stage and location of the cancer, but may include surgery, radiation therapy, chemotherapy, or a combination of these approaches. Unfortunately, the prognosis for mesothelioma is often poor, with a median survival time of around 12-18 months after diagnosis.
Mineral fibers are tiny, elongated particles that occur naturally in the environment. They are made up of minerals such as silica and are often found in rocks and soil. Some mineral fibers, like asbestos, have been widely used in various industries for their heat resistance, insulating properties, and strength. However, exposure to certain types of mineral fibers, particularly asbestos, has been linked to serious health conditions such as lung cancer, mesothelioma, and asbestosis.
Mineral fibers are defined by their physical characteristics, including their length, width, and aspect ratio (the ratio of the fiber's length to its width). According to the International Agency for Research on Cancer (IARC), mineral fibers with a length of at least 5 micrometers, a width of no more than 3 micrometers, and an aspect ratio of at least 3:1 are considered to be "respirable," meaning they can be inhaled and potentially become lodged in the lungs.
It's worth noting that not all mineral fibers are created equal when it comes to health risks. Asbestos, for example, is a known human carcinogen, while other mineral fibers such as fiberglass and rock wool are considered less hazardous, although they can still cause respiratory irritation and other health problems with prolonged exposure.
Pleural diseases refer to conditions that affect the pleura, which is the thin, double-layered membrane that surrounds the lungs and lines the inside of the chest wall. The space between these two layers contains a small amount of fluid that helps the lungs move smoothly during breathing. Pleural diseases can cause inflammation, infection, or abnormal collections of fluid in the pleural space, leading to symptoms such as chest pain, cough, and difficulty breathing.
Some common examples of pleural diseases include:
1. Pleurisy: Inflammation of the pleura that causes sharp chest pain, often worsened by breathing or coughing.
2. Pleural effusion: An abnormal accumulation of fluid in the pleural space, which can be caused by various underlying conditions such as heart failure, pneumonia, cancer, or autoimmune disorders.
3. Empyema: A collection of pus in the pleural space, usually resulting from a bacterial infection.
4. Pleural thickening: Scarring and hardening of the pleura, which can restrict lung function and cause breathlessness.
5. Mesothelioma: A rare form of cancer that affects the pleura, often caused by exposure to asbestos.
6. Pneumothorax: A collection of air in the pleural space, which can result from trauma or a rupture of the lung tissue.
Proper diagnosis and treatment of pleural diseases require a thorough evaluation by a healthcare professional, often involving imaging tests such as chest X-rays or CT scans, as well as fluid analysis or biopsy if necessary.
Pleural neoplasms refer to abnormal growths or tumors that develop in the pleura, which is the thin, double layered membrane that surrounds the lungs and lines the inside of the chest wall. These neoplasms can be benign (non-cancerous) or malignant (cancerous).
Malignant pleural neoplasms are often associated with lung cancer, mesothelioma, or metastasis from other types of cancer. They can cause symptoms such as chest pain, cough, shortness of breath, and weight loss. Diagnosis typically involves imaging tests like X-rays or CT scans, followed by biopsy to confirm the type of tumor. Treatment options may include surgery, radiation therapy, chemotherapy, or a combination of these approaches.
The pleura is the medical term for the double-layered serous membrane that surrounds the lungs and lines the inside of the chest cavity. The two layers of the pleura are called the parietal pleura, which lines the chest cavity, and the visceral pleura, which covers the surface of the lungs.
The space between these two layers is called the pleural cavity, which contains a small amount of lubricating fluid that allows the lungs to move smoothly within the chest during breathing. The main function of the pleura is to protect the lungs and facilitate their movement during respiration.
Occupational exposure refers to the contact of an individual with potentially harmful chemical, physical, or biological agents as a result of their job or occupation. This can include exposure to hazardous substances such as chemicals, heavy metals, or dusts; physical agents such as noise, radiation, or ergonomic stressors; and biological agents such as viruses, bacteria, or fungi.
Occupational exposure can occur through various routes, including inhalation, skin contact, ingestion, or injection. Prolonged or repeated exposure to these hazards can increase the risk of developing acute or chronic health conditions, such as respiratory diseases, skin disorders, neurological damage, or cancer.
Employers have a legal and ethical responsibility to minimize occupational exposures through the implementation of appropriate control measures, including engineering controls, administrative controls, personal protective equipment, and training programs. Regular monitoring and surveillance of workers' health can also help identify and prevent potential health hazards in the workplace.
Construction materials are substances or components that are used in the building and construction of infrastructure, such as buildings, roads, bridges, and other structures. These materials can be naturally occurring, like wood, stone, and clay, or they can be manufactured, like steel, concrete, and glass. The choice of construction material depends on various factors, including the project's requirements, structural strength, durability, cost, and sustainability.
In a medical context, construction materials may refer to the substances used in the construction or fabrication of medical devices, equipment, or furniture. These materials must meet strict regulations and standards to ensure they are safe, biocompatible, and do not pose a risk to patients or healthcare workers. Examples of medical construction materials include surgical-grade stainless steel, medical-grade plastics, and radiation-shielding materials used in the construction of medical imaging equipment enclosures.
Occupational diseases are health conditions or illnesses that occur as a result of exposure to hazards in the workplace. These hazards can include physical, chemical, and biological agents, as well as ergonomic factors and work-related psychosocial stressors. Examples of occupational diseases include respiratory illnesses caused by inhaling dust or fumes, hearing loss due to excessive noise exposure, and musculoskeletal disorders caused by repetitive movements or poor ergonomics. The development of an occupational disease is typically related to the nature of the work being performed and the conditions in which it is carried out. It's important to note that these diseases can be prevented or minimized through proper risk assessment, implementation of control measures, and adherence to safety regulations.
I'm sorry for any confusion, but "mining" is not a term that has a widely accepted medical definition. It is most commonly associated with the extraction of minerals from the earth in the field of geology and mining engineering. If you have any questions related to health or medicine, I would be happy to try to help answer those for you!
In medical terms, "dust" is not defined as a specific medical condition or disease. However, generally speaking, dust refers to small particles of solid matter that can be found in the air and can come from various sources, such as soil, pollen, hair, textiles, paper, or plastic.
Exposure to certain types of dust, such as those containing allergens, chemicals, or harmful pathogens, can cause a range of health problems, including respiratory issues like asthma, allergies, and lung diseases. Prolonged exposure to certain types of dust, such as silica or asbestos, can even lead to serious conditions like silicosis or mesothelioma.
Therefore, it is important for individuals who work in environments with high levels of dust to take appropriate precautions, such as wearing masks and respirators, to minimize their exposure and reduce the risk of health problems.
Talc is a mineral composed of hydrated magnesium silicate with the chemical formula H2Mg3(SiO3)4 or Mg3Si4O10(OH)2. It is widely used in various industries including pharmaceuticals and cosmetics due to its softness, lubricity, and ability to absorb moisture. In medical contexts, talc is often found in powdered products used for personal hygiene or as a drying agent in medical dressings. However, it should be noted that the use of talcum powder in the genital area has been linked to an increased risk of ovarian cancer, although the overall evidence remains controversial.
Lung neoplasms refer to abnormal growths or tumors in the lung tissue. These tumors can be benign (non-cancerous) or malignant (cancerous). Malignant lung neoplasms are further classified into two main types: small cell lung carcinoma and non-small cell lung carcinoma. Lung neoplasms can cause symptoms such as cough, chest pain, shortness of breath, and weight loss. They are often caused by smoking or exposure to secondhand smoke, but can also occur due to genetic factors, radiation exposure, and other environmental carcinogens. Early detection and treatment of lung neoplasms is crucial for improving outcomes and survival rates.
Environmental exposure refers to the contact of an individual with any chemical, physical, or biological agent in the environment that can cause a harmful effect on health. These exposures can occur through various pathways such as inhalation, ingestion, or skin contact. Examples of environmental exposures include air pollution, water contamination, occupational chemicals, and allergens. The duration and level of exposure, as well as the susceptibility of the individual, can all contribute to the risk of developing an adverse health effect.
Carcinogens are agents that can cause cancer. According to the National Institute of Environmental Health Sciences (NIEHS), environmental carcinogens refer to "cancer-causing agents that people encounter in their daily lives, including substances or exposures in air, water, food, and in the workplace." These carcinogens can increase the risk of cancer by damaging DNA or interfering with cellular processes that control growth.
Examples of environmental carcinogens include:
* Air pollution: Certain pollutants in the air, such as diesel exhaust particles and secondhand smoke, have been linked to an increased risk of lung cancer.
* Radon: A naturally occurring radioactive gas that can accumulate in homes and other buildings, radon is the second leading cause of lung cancer in the United States.
* UV radiation: Exposure to ultraviolet (UV) radiation from the sun or tanning beds can lead to skin cancer.
* Certain chemicals: Some chemicals found in the workplace or in consumer products, such as asbestos, benzene, and vinyl chloride, have been linked to an increased risk of cancer.
* Infectious agents: Certain viruses, bacteria, and parasites can increase the risk of cancer. For example, human papillomavirus (HPV) is a major cause of cervical cancer, and hepatitis B and C viruses are leading causes of liver cancer.
It's important to note that exposure to environmental carcinogens does not guarantee that a person will develop cancer. The risk depends on many factors, including the level and duration of exposure, as well as individual susceptibility. However, reducing exposure to these agents can help reduce the overall risk of cancer.
I'm sorry for any confusion, but "ships" is not a medical term. It is a common noun referring to large vehicles used for transportation on water. If you have any medical questions or terms you would like defined, I would be happy to help!
Occupational air pollutants refer to harmful substances present in the air in workplaces or occupational settings. These pollutants can include dusts, gases, fumes, vapors, or mists that are produced by industrial processes, chemical reactions, or other sources. Examples of occupational air pollutants include:
1. Respirable crystalline silica: A common mineral found in sand, stone, and concrete that can cause lung disease and cancer when inhaled in high concentrations.
2. Asbestos: A naturally occurring mineral fiber that was widely used in construction materials and industrial applications until the 1970s. Exposure to asbestos fibers can cause lung diseases such as asbestosis, lung cancer, and mesothelioma.
3. Welding fumes: Fumes generated during welding processes can contain harmful metals such as manganese, chromium, and nickel that can cause neurological damage and respiratory problems.
4. Isocyanates: Chemicals used in the production of foam insulation, spray-on coatings, and other industrial applications that can cause asthma and other respiratory symptoms.
5. Coal dust: Fine particles generated during coal mining, transportation, and handling that can cause lung disease and other health problems.
6. Diesel exhaust: Emissions from diesel engines that contain harmful particulates and gases that can cause respiratory and cardiovascular problems.
Occupational air pollutants are regulated by various government agencies, including the Occupational Safety and Health Administration (OSHA) in the United States, to protect workers from exposure and minimize health risks.
A lung is a pair of spongy, elastic organs in the chest that work together to enable breathing. They are responsible for taking in oxygen and expelling carbon dioxide through the process of respiration. The left lung has two lobes, while the right lung has three lobes. The lungs are protected by the ribcage and are covered by a double-layered membrane called the pleura. The trachea divides into two bronchi, which further divide into smaller bronchioles, leading to millions of tiny air sacs called alveoli, where the exchange of gases occurs.
I believe there may be some confusion in your question as "manufactured materials" is not a term commonly used in medical definitions. Instead, it is more related to the field of materials science and engineering. However, I can provide you with an example of how manufactured materials might be relevant in a medical context:
Manufactured materials refer to substances that are produced or synthesized through human-engineered processes, as opposed to naturally occurring materials. In the medical field, manufactured materials can include a wide range of products such as biomaterials, implants, medical devices, and pharmaceuticals. These materials are designed and created to interact with biological systems for various therapeutic or diagnostic purposes.
For instance, biomaterials like polymers, metals, ceramics, and composites can be used in the development of medical devices such as hip implants, stents, or contact lenses. Similarly, pharmaceutical companies manufacture drugs and medications using synthetic or semi-synthetic compounds to create active ingredients for various treatments.
In summary, while "manufactured materials" is not a formal medical term, it can refer to any synthetic or engineered substances designed and produced for medical applications, such as biomaterials, implants, medical devices, and pharmaceuticals.
I believe there may be some confusion in your question. "Industry" is a general term that refers to a specific branch of economic activity, or a particular way of producing goods or services. It is not a medical term with a defined meaning within the field of medicine.
However, if you are referring to the term "industrious," which can be used to describe someone who is diligent and hard-working, it could be applied in a medical context to describe a patient's level of engagement and effort in their own care. For example, a patient who is conscientious about taking their medications as prescribed, following through with recommended treatments, and making necessary lifestyle changes to manage their condition might be described as "industrious" by their healthcare provider.
Zeolites are not typically a subject of medical definition, as they are naturally occurring or synthetically produced minerals used in various industrial applications. They are microporous, aluminosilicate minerals with a crystal-like structure, composed of aluminum, silicon, and oxygen tetrahedra. These minerals have a negative charge and can exchange positively charged ions, making them useful for water purification, odor control, and as catalysts in chemical reactions.
However, there is some research into the potential use of zeolites in medical applications, such as drug delivery systems or as adsorbents to remove toxins from the body. In these contexts, the definition of zeolites would be similar to their industrial definition.
Neoplasms, mesothelial are a type of tumor that develops from the mesothelial cells which form the lining of various body cavities such as the pleura (lungs), peritoneum (abdomen), and pericardium (heart). These tumors can be benign or malignant, with malignant mesotheliomas being associated with exposure to asbestos. Symptoms may include chest pain, cough, and difficulty breathing, depending on the location of the tumor. Treatment options include surgery, radiation therapy, and chemotherapy.
Pulmonary fibrosis is a specific type of lung disease that results from the thickening and scarring of the lung tissues, particularly those in the alveoli (air sacs) and interstitium (the space around the air sacs). This scarring makes it harder for the lungs to properly expand and transfer oxygen into the bloodstream, leading to symptoms such as shortness of breath, coughing, fatigue, and eventually respiratory failure. The exact cause of pulmonary fibrosis can vary, with some cases being idiopathic (without a known cause) or related to environmental factors, medications, medical conditions, or genetic predisposition.
I'm sorry for any confusion, but "Silicic Acid" is not a recognized medical term. Silicic acid, also known as orthosilicic acid, is a compound that contains silicon and oxygen in a ratio of 1:2 (Si(OH)4). It's commonly found in water, soil, and various plants.
In the context of health and medicine, silica or silicic acid supplements are sometimes used for their potential benefits to bone health, collagen production, and hair and nail growth. However, more research is needed to fully understand these effects and their optimal usage.
If you have any questions related to a specific medical condition or treatment, I would recommend consulting with a healthcare professional.
I'm sorry for any confusion, but "Montana" is not a medical term or condition. It is the name of a state in the United States, located in the northwestern region of the country. If you have any questions about medical terminology or health-related topics, I would be happy to help with those instead.
Carcinogens are agents (substances or mixtures of substances) that can cause cancer. They may be naturally occurring or man-made. Carcinogens can increase the risk of cancer by altering cellular DNA, disrupting cellular function, or promoting cell growth. Examples of carcinogens include certain chemicals found in tobacco smoke, asbestos, UV radiation from the sun, and some viruses.
It's important to note that not all exposures to carcinogens will result in cancer, and the risk typically depends on factors such as the level and duration of exposure, individual genetic susceptibility, and lifestyle choices. The International Agency for Research on Cancer (IARC) classifies carcinogens into different groups based on the strength of evidence linking them to cancer:
Group 1: Carcinogenic to humans
Group 2A: Probably carcinogenic to humans
Group 2B: Possibly carcinogenic to humans
Group 3: Not classifiable as to its carcinogenicity to humans
Group 4: Probably not carcinogenic to humans
This information is based on medical research and may be subject to change as new studies become available. Always consult a healthcare professional for medical advice.
Silicon dioxide is not a medical term, but a chemical compound with the formula SiO2. It's commonly known as quartz or sand and is not something that would typically have a medical definition. However, in some cases, silicon dioxide can be used in pharmaceutical preparations as an excipient (an inactive substance that serves as a vehicle or medium for a drug) or as a food additive, often as an anti-caking agent.
In these contexts, it's important to note that silicon dioxide is considered generally recognized as safe (GRAS) by the U.S. Food and Drug Administration (FDA). However, exposure to very high levels of respirable silica dust, such as in certain industrial settings, can increase the risk of lung disease, including silicosis.
I'm sorry for any confusion, but "quartz" is not a medical term. Quartz is a mineral that is one of the most common minerals on Earth. It is found in many different types of rocks and is made up of silicon dioxide (SiO2). It is often used in electronics and watches because of its piezoelectric properties, which means it can generate an electric charge when subjected to pressure or stress.
It does not have any direct relation with medical field, although there are some Quartz based equipment like quartz crystal microbalance (QCM) sensors that are used in medical research for the detection of biomolecules and pathogens.
Pneumoconiosis is a group of lung diseases caused by inhaling dust particles, leading to fibrosis or scarring of the lungs. The type of pneumoconiosis depends on the specific dust inhaled. Examples include coal worker's pneumoconiosis (from coal dust), silicosis (from crystalline silica dust), and asbestosis (from asbestos fibers). These diseases are generally preventable by minimizing exposure to harmful dusts through proper engineering controls, protective equipment, and workplace safety regulations.
Inhalation exposure is a term used in occupational and environmental health to describe the situation where an individual breathes in substances present in the air, which could be gases, vapors, fumes, mist, or particulate matter. These substances can originate from various sources, such as industrial processes, chemical reactions, or natural phenomena.
The extent of inhalation exposure is determined by several factors, including:
1. Concentration of the substance in the air
2. Duration of exposure
3. Frequency of exposure
4. The individual's breathing rate
5. The efficiency of the individual's respiratory protection, if any
Inhalation exposure can lead to adverse health effects, depending on the toxicity and concentration of the inhaled substances. Short-term or acute health effects may include irritation of the eyes, nose, throat, or lungs, while long-term or chronic exposure can result in more severe health issues, such as respiratory diseases, neurological disorders, or cancer.
It is essential to monitor and control inhalation exposures in occupational settings to protect workers' health and ensure compliance with regulatory standards. Various methods are employed for exposure assessment, including personal air sampling, area monitoring, and biological monitoring. Based on the results of these assessments, appropriate control measures can be implemented to reduce or eliminate the risks associated with inhalation exposure.
Respiratory tract neoplasms refer to abnormal growths or tumors that occur in the respiratory system, which includes the nose, throat (pharynx), voice box (larynx), windpipe (trachea), bronchi, and lungs. These growths can be benign or malignant (cancerous). Malignant neoplasms are cancerous tumors that can invade nearby tissues, spread to other parts of the body, and interfere with normal respiratory function, leading to serious health consequences.
Respiratory tract neoplasms can have various causes, including genetic factors, exposure to environmental carcinogens such as tobacco smoke, asbestos, and radon, and certain viral infections. Symptoms of respiratory tract neoplasms may include coughing, wheezing, shortness of breath, chest pain, hoarseness, or blood in the sputum. Diagnosis typically involves imaging tests such as X-rays, CT scans, or PET scans, as well as biopsies to determine the type and extent of the tumor. Treatment options may include surgery, radiation therapy, chemotherapy, targeted therapy, or a combination of these approaches.
Smoking is not a medical condition, but it's a significant health risk behavior. Here is the definition from a public health perspective:
Smoking is the act of inhaling and exhaling the smoke of burning tobacco that is commonly consumed through cigarettes, pipes, and cigars. The smoke contains over 7,000 chemicals, including nicotine, tar, carbon monoxide, and numerous toxic and carcinogenic substances. These toxins contribute to a wide range of diseases and health conditions, such as lung cancer, heart disease, stroke, chronic obstructive pulmonary disease (COPD), and various other cancers, as well as adverse reproductive outcomes and negative impacts on the developing fetus during pregnancy. Smoking is highly addictive due to the nicotine content, which makes quitting smoking a significant challenge for many individuals.
Cocarcinogenesis is a term used in the field of oncology to describe a process where exposure to certain chemicals or physical agents enhances the tumor-forming ability of a cancer-causing agent (carcinogen). A cocarcinogen does not have the ability to initiate cancer on its own, but it can promote the development and progression of cancer when combined with a carcinogen.
In other words, a cocarcinogen is a substance or factor that acts synergistically with a known carcinogen to increase the likelihood or speed up the development of cancer. This process can occur through various mechanisms, such as suppressing the immune system, promoting inflammation, increasing cell proliferation, or inhibiting apoptosis (programmed cell death).
Examples of cocarcinogens include tobacco smoke, alcohol, certain viruses, and radiation. These agents can interact with carcinogens to increase the risk of cancer in individuals who are exposed to them. It is important to note that while cocarcinogens themselves may not directly cause cancer, they can significantly contribute to its development and progression when combined with other harmful substances or factors.
Phase-contrast microscopy is a type of optical microscopy that allows visualization of transparent or translucent specimens, such as living cells and their organelles, by increasing the contrast between areas with different refractive indices within the sample. This technique works by converting phase shifts in light passing through the sample into changes in amplitude, which can then be observed as differences in brightness and contrast.
In a phase-contrast microscope, a special condenser and objective are used to create an optical path difference between the direct and diffracted light rays coming from the specimen. The condenser introduces a phase shift for the diffracted light, while the objective contains a phase ring that compensates for this shift in the direct light. This results in the direct light appearing brighter than the diffracted light, creating contrast between areas with different refractive indices within the sample.
Phase-contrast microscopy is particularly useful for observing unstained living cells and their dynamic processes, such as cell division, motility, and secretion, without the need for stains or dyes that might affect their viability or behavior.
Lung diseases refer to a broad category of disorders that affect the lungs and other structures within the respiratory system. These diseases can impair lung function, leading to symptoms such as coughing, shortness of breath, chest pain, and wheezing. They can be categorized into several types based on the underlying cause and nature of the disease process. Some common examples include:
1. Obstructive lung diseases: These are characterized by narrowing or blockage of the airways, making it difficult to breathe out. Examples include chronic obstructive pulmonary disease (COPD), asthma, bronchiectasis, and cystic fibrosis.
2. Restrictive lung diseases: These involve stiffening or scarring of the lungs, which reduces their ability to expand and take in air. Examples include idiopathic pulmonary fibrosis, sarcoidosis, and asbestosis.
3. Infectious lung diseases: These are caused by bacteria, viruses, fungi, or parasites that infect the lungs. Examples include pneumonia, tuberculosis, and influenza.
4. Vascular lung diseases: These affect the blood vessels in the lungs, impairing oxygen exchange. Examples include pulmonary embolism, pulmonary hypertension, and chronic thromboembolic pulmonary hypertension (CTEPH).
5. Neoplastic lung diseases: These involve abnormal growth of cells within the lungs, leading to cancer. Examples include small cell lung cancer, non-small cell lung cancer, and mesothelioma.
6. Other lung diseases: These include interstitial lung diseases, pleural effusions, and rare disorders such as pulmonary alveolar proteinosis and lymphangioleiomyomatosis (LAM).
It is important to note that this list is not exhaustive, and there are many other conditions that can affect the lungs. Proper diagnosis and treatment of lung diseases require consultation with a healthcare professional, such as a pulmonologist or respiratory therapist.