• Acrylonitrile butadiene styrene (ABS) (chemical formula (C8H8)x·​(C4H6)y·​(C3H3N)z ) is a common thermoplastic polymer. (wikipedia.org)
  • ABS is a terpolymer made by polymerizing styrene and acrylonitrile in the presence of polybutadiene. (wikipedia.org)
  • The proportions can vary from 15% to 35% acrylonitrile, 5% to 30% butadiene and 40% to 60% styrene. (wikipedia.org)
  • No acute-, intermediate-, or chronic- these effects to humans is encumbered and acrylonitrile-butadiene-styrene (ABS) Environment duration inhalation MRLs were derived by large species differences in the resin plastics. (cdc.gov)
  • Tweaking mix ratios of acrylonitrile/butadiene/styrene in ABS resins lets designers boost a part's heat stability, chemical resistance, toughness, stiffness, and impact resistance. (machinedesign.com)
  • The aftermarket golf-cart top from Primex Plastics Corp., Oakwood, Ga., and Piper Plastics Inc., Orlando, is made from Centrex 833 acrylonitrile-styreneacrylic (ASA) and Lustran 752 ABS. (machinedesign.com)
  • Acrylonitrile butadiene styrene (ABS) use has grown over the last 50 years as more and more molders and OEMs take advantage of the resin's processing and property versatility. (machinedesign.com)
  • Properties of specific grades of ABS resin are determined by several factors including acrylonitrile-butadiene-styrene mix ratio, manufacturing method, rubber particle size, and polymer chain length. (machinedesign.com)
  • Its products are categorized as LED lighting, refrigeration lights, ABS (acrylonitrile butadiene styrene) piping and others. (indiatimes.com)
  • The fuselage uses ABS or Acrylonitrile butadiene styrene copolymer, while the ice mold boxes use polypropylene. (yankodesign.com)
  • Since 1963, Lego blocks have been made from a strong, resilient plastic known as acrylonitrile butadiene styrene (ABS). (nbcnews.com)
  • A special ABS (Acrylonitrile/Butadiene/Styrene) thermoplastic material is used for manufacturing of the body. (ortofon.com)
  • The system was constructed using a polycarbonate/acrylonitrile-butadiene-styrene (CYCOLOY ® MC 8800 resin) outer panel, along with a propriety lightweight metallic inner panel. (sae.org)
  • Environmental epidemiologic investigations in the styrene -butadiene rubber production industry. (cdc.gov)
  • A detailed study was undertaken of the industry beginning in 1976 following the leukemia deaths of two men employed at adjacent styrene /butadiene rubber facilities in Texas. (cdc.gov)
  • This letter concerns Headquarters Ruling Letter (HQ) 087267, issued to you on August 16, 1990, regarding the tariff classification of fabric treated with a solution containing styrene-butadiene rubber (SBR) under the Harmonized Tariff Schedule of the United States Annotated (HTSUSA). (faqs.org)
  • The fabrics are dipped in a solution containing Resorine [Resorcin] (1.8%), Formalin (3.6%), styrene-butadiene rubber (29.2%), melamine (12.4%), water (48.8%) and other materials, including caustic soda (4.1%), for 60 seconds at a temperature of 150 degrees Celsius, and then are dried at 205 degrees Celsius for approximately 36 seconds. (faqs.org)
  • The fabrics have been dipped in a rubber solution containing resorcin, formalin, styrene-butadiene rubber (SBR) and water. (faqs.org)
  • 4,5) examined mortality among 2756 white males employed in two styrene-butadiene rubber production facilities in Port Neches, Texas. (cdc.gov)
  • Breathing high levels of 1,3-butadiene for a short time may cause nausea, dry mouth and nose, headache, and decreased blood pressure and pulse rate. (cdc.gov)
  • Background levels of 1,3-butadiene in the No data were located on the concentration of 1,3-butadiene in soil. (cdc.gov)
  • Breathing very high levels of 1,3-butadiene for a short time can cause central nervous system damage, blurred vision, nausea, fatigue, headache, decreased blood pressure and pulse rate, and unconsciousness. (cdc.gov)
  • Other effects seen in animals that breathed low levels of 1,3-butadiene for one year include kidney and liver disease, and damaged lungs. (cdc.gov)
  • The Hydrogenated Nitrile Butadiene Rubber (HNBR) market is expected to register fluctuating growth trends in the long term, while inflation and supply chain concerns are expected to continue in 2023. (researchandmarkets.com)
  • Shifting consumer preferences in a projected economic downturn scenario, amendments to industrial policies to align with growing environmental concerns, huge fluctuations in raw material costs triggered by prevailing geo-political tensions, and expected economic turbulences are noted as key challenges to be addressed by the Hydrogenated Nitrile Butadiene Rubber (HNBR) industry players during the short and medium term forecast. (researchandmarkets.com)
  • The Global Hydrogenated Nitrile Butadiene Rubber (HNBR) Market Analysis Report is a comprehensive report with in-depth qualitative and quantitative research evaluating the current scenario and providing future Hydrogenated Nitrile Butadiene Rubber (HNBR) Market potential for different product segments with their market penetration in various applications and end-uses, over the next eight years, to 2030. (researchandmarkets.com)
  • Hydrogenated Nitrile Butadiene Rubber (HNBR) market players' investments will be oriented towards acquiring new technologies, securing raw materials, efficient procurement/inventory, strengthening product portfolios, and leveraging capabilities to maintain growth during challenging times. (researchandmarkets.com)
  • The economic and social challenges are noted to be highly varying between different countries/markets and Hydrogenated Nitrile Butadiene Rubber (HNBR) manufacturers and associated players are focused on country-specific strategies. (researchandmarkets.com)
  • Crude oil prices fluctuating to the tune of $60/barrel in one year are emerging to be a key concern for the Hydrogenated Nitrile Butadiene Rubber (HNBR) market, as fuel and chemical prices are impacting many other segments. (researchandmarkets.com)
  • Uneven recovery in different end markets and geographies is a key challenge in understanding and analyzing the Hydrogenated Nitrile Butadiene Rubber (HNBR) market landscape. (researchandmarkets.com)
  • Concerns of global economic slowdown, the Impact of war in Ukraine, lockdowns in China with resurging COVID cases, and the Risks of stagflation envisaging numerous market scenarios are pressing the need for Hydrogenated Nitrile Butadiene Rubber (HNBR) industry players to be more vigilant and forward-looking. (researchandmarkets.com)
  • Robust changes brought in by the pandemic COVID-19 in the Hydrogenated Nitrile Butadiene Rubber (HNBR) supply chain and the burgeoning drive for a cleaner and sustainable environment are necessitating companies to alter their strategies. (researchandmarkets.com)
  • The market study provides a comprehensive description of current trends and developments in the Hydrogenated Nitrile Butadiene Rubber (HNBR) industry along with a detailed predictive and prescriptive analysis for 2030. (researchandmarkets.com)
  • The research estimates global Hydrogenated Nitrile Butadiene Rubber (HNBR) market revenues in 2022, considering the Hydrogenated Nitrile Butadiene Rubber (HNBR) market prices, Hydrogenated Nitrile Butadiene Rubber (HNBR) production, supply, demand, and Hydrogenated Nitrile Butadiene Rubber (HNBR) trade and logistics across regions. (researchandmarkets.com)
  • Detailed market share statistics, penetration, and shift in demand for different types, applications, and geographies in the Hydrogenated Nitrile Butadiene Rubber (HNBR) market from 2022 to 2030 are included in the thorough research. (researchandmarkets.com)
  • The report covers North America, Europe, Asia Pacific, Middle East, Africa, and LATAM/South and Central America Hydrogenated Nitrile Butadiene Rubber (HNBR) market statistics, along with Hydrogenated Nitrile Butadiene Rubber (HNBR) CAGR Market Growth Rates from 2022 to 2030 will provide a deep understanding and projection of the market. (researchandmarkets.com)
  • The Hydrogenated Nitrile Butadiene Rubber (HNBR) market is further split by key product types, dominant applications, and leading end users of Hydrogenated Nitrile Butadiene Rubber (HNBR). (researchandmarkets.com)
  • About 60% of the manufactured 1,3-butadiene is used to make synthetic rubber. (cdc.gov)
  • The properties are created by rubber toughening, where fine particles of elastomer are distributed throughout the rigid matrix. (wikipedia.org)
  • Observed effects include neurological used to make synthetic rubber used for Dermal - Minor route of exposure for dysfunction, reproductive and the production of car and truck tires. (cdc.gov)
  • 1,3-Butadiene (BD), which is used to manufacture synthetic rubber, is a mutagen and carcinogen. (utmb.edu)
  • Butadiene, an essential component of synthetic rubber, is currently produced by the petrochemical industry from fossil reserves. (innovationtoronto.com)
  • In July this year, the exchange launched synthetic rubber futures, the world's first futures contract that takes butadiene rubber as the underlying product for delivery. (innovationtoronto.com)
  • Together, the two companies will research and develop neodymium-butadiene rubber using bio-butadiene, with the aim of expanding environmentally friendly synthetic rubber in tire manufacturing. (innovationtoronto.com)
  • The purpose of the rubber treatment is to facilitate the adhesion of the fabrics, which ultimately form the top and bottom layers of finished belting, to other materials used in the manufacture of belting such as cord fabric and rubber sheeting. (faqs.org)
  • Aliso Street plant, which manufactured butadiene, an ingredient in synthetic rubber. (aqmd.gov)
  • Considering the pandemic scenario, automotive manufacturing activities were temporarily stopped during the government-imposed lockdown to curb the spread of new COVID-19 cases, thereby reducing the demand for liquid synthetic rubber-based automotive parts such as tires, drive belts, seals, gaskets, hoses, tank linings, and others. (reportlinker.com)
  • Liquid synthetic rubber includes wide applications in the manufacturing of tires because it provides enhanced durability and superior performance, along with the adoption of tire labeling regulations. (reportlinker.com)
  • In this work rubber composites are made by using various blends of rubber with wheat flour. (usda.gov)
  • Before blending with the rubber, the wheat flour was pre-cooked at one of three temperatures, which makes its starch molecules swell and improves its surface area directly with the pre-cooking temperature. (usda.gov)
  • The aqueous wheat flour dispersions were then mixed with the styrene-butadiene latex to form rubber composites using freeze-drying and compression molding methods. (usda.gov)
  • 1,3-Butadiene is used in the manufacture of synthetic rubbers (such as styrene-buta- diene rubber or poly-butadiene rubber) and thermoplastic resins (1). (cdc.gov)
  • failed verification] ABS is one of many types of thermoplastic with biomedical applications, with injection-molded components being easy to manufacture for single-use. (wikipedia.org)
  • Recent innovation in AM has seen the emergence of long-fibre composite AM technologies, such as the Mark Two (Markforged Inc, USA) system, enabling the manufacture of thermoplastic polymer composites with long-fibre reinforcement. (researchsquare.com)
  • The Department of Health and Human Services (DHHS), IARC, and EPA have determined that 1,3-butadiene is a human carcinogen. (cdc.gov)
  • 1,3-butadiene as a human carcinogen. (cdc.gov)
  • The single bonds attach to each other creating the self-reaction, which in turn creates the long chained polymer. (firehouse.com)
  • Longer polymer chains enhance strength and toughness but worsen flow characteristics, which makes processing trickier. (machinedesign.com)
  • In the process, 1,3-Butadiene is produced using the dehydrogenation of n-butane, which employs n-methyl pyrrolidone (NMP). (techworldsnews.com)
  • Butadiene was produced by the catalytic dehydrogenation of n-butane. (cdc.gov)
  • 1,3-butadiene (C4H6) is produced by petroleum processing and is a simple conjugated diene and a synthetic gas. (techworldsnews.com)
  • Approximately 53 billion pounds of synthetic polymers are manufactured each year in the United States alone. (firehouse.com)
  • Look around the room you are in - how many things are made of natural polymers and how many are synthetic? (firehouse.com)
  • These include the manufacture of isopropanol, synthetic ethanol, phosphate fertilizers, lead batteries, soap and detergents, sulfuric acid, and nitric acid, and industries involving pickling and other acid treatment of metals. (who.int)
  • The Department of Health and Human Services has determined that 1,3-butadiene may reasonably be anticipated to be a carcinogen. (cdc.gov)
  • This industry comprises establishments primarily engaged in (1) manufacturing acyclic (i.e., aliphatic) hydrocarbons such as ethylene, propylene, and butylene made from refined petroleum or liquid hydrocarbons and/or (2) manufacturing cyclic aromatic hydrocarbons such as benzene, toluene, styrene, xylene, ethyl benzene, and cumene made from refined petroleum or liquid hydrocarbons. (naics.com)
  • 1,3-Butadiene is also used to make plastics including acrylics. (cdc.gov)
  • The jobs of emergency responders are made easier and safer because of plastics. (firehouse.com)
  • Thermosets are plastics that are hardened into their final shape in the manufacturing process by heating and usually cannot be softened again by heating without losing their identity. (firehouse.com)
  • Made from 91%* recycled plastics (bottles, air conditioner units and other junk), these wireless earbuds come with silicone tips and 30 hours of playtime. (urbanears.com)
  • Boo Tip is made from 91%* recycled plastics (bottles, air conditioner units and other junk). (urbanears.com)
  • One way to improve its sustainability is via distributed recycling of plastics in homes, schools, and libraries to create feedstock filament for printing. (cdc.gov)
  • All tasks released particles that contained hazardous metals (e.g., manganese) and with size capable of depositing in the gas exchange region of the lung, i.e., granulation of waste PLA and ABS (667 to 714 nm) and filament making (608 to 711 nm) and FFF 3-D printing (616 to 731 nm) with waste and virgin plastics. (cdc.gov)
  • Polymers can be subdivided into two groups - naturally occurring and man-made. (firehouse.com)
  • Man-made polymers are created from organic materials found in nature. (firehouse.com)
  • Man-made and naturally occurring polymers behave much the same way during reactions, especially when exposed to fire. (firehouse.com)
  • 1,3-Butadiene, used in manufacturing polymers. (acs.org)
  • DHHS, In air, 1,3-butadiene is broken down in IARC, and EPA have classified about 6 hours. (cdc.gov)
  • The International Agency for Research on Cancer (IARC) reviewed the literature on butadiene in 1992 and concluded that there is "limited evidence" of the carcino- genicity of butadiene in humans and "suf- ficient evidence" of the carcinogenicity of butadiene in experimental animals based on three long-term animal bioassays (3). (cdc.gov)
  • Styrene is used in the manufacture of polystyrene and numerous copolymers and resins, and emissions result from manufacture and fabrication. (who.int)
  • 1,3-Butadiene is a colorless gas with a exposure for the general and by the dose (how much), the Numerous target organs for mild gasoline-like odor. (cdc.gov)
  • No data were located on the and Disease Registry concentration of 1,3-butadiene in www.atsdr.cdc.gov drinking water. (cdc.gov)
  • Fibers (usually glass fibers) and additives can be mixed in the resin pellets to make the final product strong and raise the maximum operating temperature as high as 80 °C (176 °F). Pigments can also be added, as the raw material's original color is translucent ivory to white. (wikipedia.org)
  • Such versatility in ABS formulation makes the resin suitable for a wide range of products including those exposed to weather or significant abuse, or both. (machinedesign.com)
  • Designers of plastic composites can choose from a wide variety of plastic resin systems and fiber reinforcements when making a specific product. (greenbuildingsolutions.org)
  • Usually manufactured using a plastic molding process, the combination of fibers and resin matrix cures into a solid laminate. (greenbuildingsolutions.org)
  • Exposure to 1,3-butadiene occurs mainly from breathing contaminated air. (cdc.gov)
  • Animal studies found increases in a variety of tumor types from exposure to 1,3-butadiene. (cdc.gov)
  • We do not know if exposure to 1,3-butadiene will result in birth defects or other developmental effects in people. (cdc.gov)
  • How can families reduce the risk of exposure to 1,3-butadiene? (cdc.gov)
  • for The predominant route of exposure for 1,3-Butadiene is absorbed from the lungs 1,3-Butadiene metabolites in urine can be the general population is inhalation of into the bloodstream following inhalation used as biomarkers of exposure. (cdc.gov)
  • 1,3-Butadiene is broken down to its inhalation of air mixed with vehicle exposure levels. (cdc.gov)
  • Most of the information on the health effects of 1,3-butadiene comes from studies where the exposure was from breathing contaminated air. (cdc.gov)
  • Although studies of butadiene-exposed workers in other countries have not detected an effect of exposure on frequencies of hprt mutant lymphocytes, we have repeatedly observed this result in our studies in Texas. (utmb.edu)
  • We examined the relationship between two measures of external BPA exposure (air and hand-wipe samples) and one of internal exposure (total BPA in urine) for a group of US manufacturing workers. (cdc.gov)
  • however, inhalation, on average, appeared to be a more dominant exposure route than dermal contact for these manufacturing workers. (cdc.gov)
  • 1,3-Butadiene is a chemical made from the processing of petroleum. (cdc.gov)
  • duration (how long), and the 1,3-butadiene toxicity have been the processing of petroleum. (cdc.gov)
  • The method uses the steam cracking process, which produces 1,3-Butadiene as its byproduct. (techworldsnews.com)
  • Butadiene is currently produced as a byproduct of the petrochemical industry, which can lead to shortages in its supply," explains Sang-Ho Chung, a research scientist in the labs of Javier Ruiz-Martinez, with whom he co-led the work. (innovationtoronto.com)
  • Concerning the other industrial chemicals evaluated in this volume, 1,3-butadiene and diethyl sulfate were classified as probably carcinogenic to humans. (who.int)
  • A key ingredient in the manufacture of car tires and sneaker soles could be made sustainably, following new analysis of an old catalytic process. (innovationtoronto.com)
  • These challenges in butadiene production have sparked renewed interest in the Lebedev process, first developed in the 1930s, that converts ethanol to butadiene in a single catalytic reactor. (innovationtoronto.com)
  • In laboratory animals, 1.3-butadiene causes skeletal abnormalities, brain growth outside of the skul , and late fetal deaths. (cdc.gov)
  • Additive Manufacturing (AM), also known as 3D Printing, has been around for more than 2 decades and has recently gained importance for use in direct manufacturing. (researchsquare.com)
  • The American Society for Testing Materials (ASTM) defines a plastic as 'a material that contains as an essential ingredient one or more organic polymeric substances of large molecular weight, is solid in its finished state, and at some stage in its manufacture or processing into finished articles can be shaped by flow. (firehouse.com)
  • A variety of modifications can be made to improve impact resistance, toughness, and heat resistance. (wikipedia.org)
  • Likewise, tweaking the amount of butadiene improves toughness and impact resistance. (machinedesign.com)
  • The study offers a detailed cost analysis of 1,3-Butadiene production via C4 hydrocarbons. (techworldsnews.com)
  • Commercial wheat flours with two different concentrations of insoluble protein were used as fillers to reinforce styrene-butadiene latex composites and their viscoelastic properties were examined. (usda.gov)
  • It's made by grouping millions of tiny glass fibers , which are tiny rods of glass nearly too small to see individually, like glass wool. (newstarget.com)
  • In HQ 087267, we classified the three fabrics considered under subheading 5906.99.2500 , HTSUSA, which provides for "rubberized textile fabrics, other than those of heading 5902, other, other, of man-made fibers, other. (faqs.org)
  • Many plastic composite building products are now produced by embedding natural fibers derived from the bast (i.e. outer stem) of certain plants-wheat-straw fiber, flax, jute, kenaf, sisal, hemp, and coconut-in a polyester or polypropylene matrix. (greenbuildingsolutions.org)
  • Both of these fibers are thermoplastics, made from petrochemicals, with a long history of use. (enn.com)
  • Ethylene, a key building block in plastic and vital to our country's manufacturing industry, has been thrust into the spotlight due to Hurricane Harvey's impact on its production process. (afpm.org)
  • With that understanding, we could synthesize just the catalyst particles that are active for butadiene production and avoid the particles that produce ethylene," Chung says. (innovationtoronto.com)
  • A review was provided of the current literature concerning cohort mortality studies of the styrene (100425) 1,3-butadiene (106990) industry. (cdc.gov)
  • Only one previous study has examined the mortality experience of butadiene pro- duction workers (8-10). (cdc.gov)
  • Low moisture, excellent dimensional stability and resistance to rot make it an ideal replacement for organic base sheets. (jm.com)
  • ABS made in this way produces highgloss parts with good impact strength and heat resistance. (machinedesign.com)
  • In both new construction projects and renovation work, design professionals are continuing to discover the advantages of green building solutions: plastic composite building products, including durability, light weight, corrosion resistance, high strength, and low maintenance requirements. (greenbuildingsolutions.org)
  • Acrolein is used as an intermediate in the manufacture of acrylic acid. (toronto.ca)
  • The lungs are in such dire need of help, and the nutritional levels in smoker's bodies is SO LOW they have no idea how to make themselves feel good, or even normal, without a nicotine fix. (newstarget.com)
  • Compared to the 1950s, before they used ammonia, cigarettes only delivered about 12 to 15 milligrams of nicotine on tiny tobacco particles that floated in on the smoke and entered the lung tissue, eventually entering the blood stream and making its way to the heart and brain. (newstarget.com)
  • Could it be that plastic particles are woven into the rolling paper to make your nicotine delivery device more efficient? (newstarget.com)
  • For the purpose of this report, the committee defined secondhand smoke as a complex mixture that is made up of gases and particles and includes smoke from burning cigarettes, cigars, and pipe tobacco (sidestream smoke) and exhaled mainstream smoke (CDC, 2006). (nationalacademies.org)
  • Group A: The reporting threshold of Group A was met or exceeded based on the total amount of chemical released, manufactured, processed or otherwise used in a year. (toronto.ca)
  • These chemicals may be used or released in a variety of operations, including chemical manufacturing, food and beverage production, automotive repair and laboratories. (toronto.ca)
  • The latest report titled " 1,3-Butadiene Production Cost Report " by Procurement Resource a global procurement research and consulting firm, provides an in-depth cost analysis of the production process of the 1,3-Butadiene. (techworldsnews.com)
  • This report covers a detailed cost analysis of 1,3-Butadiene production using the Houdry Catadiene process. (techworldsnews.com)
  • Epidemiologic studies have been conduct- ed among workers exposed to butadiene in the manufacture of styrene-butadiene rub- ber (4-) and among workers involved in the production of butadiene monomer (8-10). (cdc.gov)
  • The nitrile groups from neighboring chains, being polar, attract each other and bind the chains together, making ABS stronger than pure polystyrene. (wikipedia.org)
  • We represent the makers of the fuels that keep Americans moving and the petrochemicals that are the essential building blocks for modern life. (afpm.org)
  • Advances in petrochemicals - which are already helping transform medical science - are creating a new, more efficient and more cost-effective way to remove salt from ocean water. (afpm.org)
  • How Do Petrochemicals Help Make Your Halloween Safe and Fun? (afpm.org)
  • Economic factors such as lower unit build quantities, reduced vehicle mass, investment cost, and tooling lead times influence material choice for industry. (sae.org)
  • 1,3-Butadiene may be broken down by microorganisms in the soil. (cdc.gov)
  • In water and soil, 1,3-butadiene is expected to evaporate quickly into the air. (cdc.gov)
  • This study examined lymphopoi- etic cancer risk in relation to indices of cumulative butadiene and styrene expo- sure, and found a significant excess risk of leukemia associated with butadiene expo- sure (11). (cdc.gov)
  • Approxi- mately 3000 million pounds of butadiene are produced in the United States each year (2). (cdc.gov)
  • We advocate for public policies that promote growth and investment in the refining and petrochemical manufacturing industries to help drive our economy, add jobs, increase energy security and remain competitive in a global economy. (afpm.org)
  • Furthermore, the high petrochemical content, and shorter lifespan and more intense cleaning needs of carpet, when compared with other flooring materials, such as wood, linoleum, and polished concrete, have made it a symbol of the consumptive excess of the built environment in the U.S. (enn.com)
  • Using their innovative technologies, research and development expertise, and know-how from other industries, suppliers can help OEMs reduce the time to develop products and manufacture functional prototypes. (sme.org)
  • In most carpets, the face fiber is tufted, or punched through a primary backing usually made of polypropylene. (enn.com)
  • In the United States, there are around 47 tire manufacturing plants with a total capacity of 760.06 thousand daily units. (reportlinker.com)
  • The fabrics are made in and imported from Singapore and are used as carcass materials in the manufacture of machine belting for automotive and industrial equipment. (faqs.org)
  • The most common backing materials are styrene butadiene latex (SB latex) for broadloom carpet, and vinyl for carpet tile. (enn.com)
  • The ice shaving or slush machine is designed to be made from environmentally friendly and recyclable materials. (yankodesign.com)
  • The quantified physical properties of materials are required by design engineers to inform and validate their designs, and this is no less true for AM that it is for traditional manufacturing methods. (researchsquare.com)
  • To date though, the mechanical response of the materials with respect to build parameter variation is little understood. (researchsquare.com)
  • The fabric is used in the manufacture of reinforced water hoses for the automotive industry. (faqs.org)
  • With the successful commercialization of INEOS Styrolution's ABS ECO grades for our household appliances, we have set a new benchmark in the circular economy for the industry and a step closer to realizing our goal in creating the first large-scale home appliance closed-loop circular economy system in the world. (aap.com.au)
  • Studies have shown that workers exposed to 1,3-butadiene may have an increased risk of cancers of the stomach, blood, and lymphatic system. (cdc.gov)
  • Animal studies showed that breathing 1,3-butadiene during pregnancy can increase the number of birth defects. (cdc.gov)
  • Evidence from mechanistic studies did not contribute in making the overall classification decision. (who.int)
  • GlasBase Plus is intended to be used as a base sheet in built up roofing or as a base or intermediate ply in modified bitumen systems. (jm.com)
  • It is likely that health effects seen in children exposed to high amounts of 1,3-butadiene will be similar to the effects seen in adults. (cdc.gov)
  • The three fabrics are made from high tenacity, multiple yarns with a tenacity of 74 centinewtons per tex. (faqs.org)
  • Heritage windows are suited to period and historic properties and are either made from natural timber or high-performance uPVC that replicates the authentic appearance of timber windows. (sehbac.com)
  • We manufacture high quality products in small batches, with trusted partners. (funandfunction.com)
  • Due to its high strength and good plasticity, dual-phase (DP) steel is widely used for manufacturing the structural and reinforcement components of automobiles. (bvsalud.org)
  • The primary product used in the manufacturing of tires is polybutadiene. (reportlinker.com)
  • But it could be efficiently made in a one-step reaction from renewable ethanol using a modernized version of an unusual old catalyst. (innovationtoronto.com)
  • Sustainable butadiene could be made by using bioethanol in the Lebedev process or even ethanol made using cutting-edge CO2-to-ethanol processes," Chung says. (innovationtoronto.com)
  • Methods: During 2013-2014, we recruited 78 workers from six US companies that made BPA or made products with BPA. (cdc.gov)