EthylenePolyvinyl AlcoholEtherHigh-density polyWater-solubleTitanium DioxideCompoundsBiodegradablePlasticizerMiscibilityMembranesStearic AcidTerephthalateCelluloseMembraneIngredientsEthanolPolymersAdditiveQuercetinSyntheticProprietary blendAqueousSeamlessChemicalChitosanStudyCompoundPharmaceuticalNutrientsSolutionEffectMaterialFilmPrimaryMade
Ethylene6
- In this study, poly(ethylene glycol) (PEG) was used as a plasticizer for BPS. (materialstoday.com)
- To reinforce the materials so that they can bear substantial mechanical loads, a second polymer, poly(ethylene glycol) diacrylate, was added to the original blend. (sciencedaily.com)
- Acrylate-poly(trimethylene carbonate)-block-poly(ethylene glycol)-block- poly(trimethylene carbonate)-acrylate (A-PTMC-PEG-PTMC-A) tri-block copolymers were synthesized from 3.4 and 20 kg/mol PEG-diol initiators. (queensu.ca)
- The merits of low-cost, easy-fabrication, and FDA-approved biodegradable poly-ε-caprolactone (PCL) and dissolving poly(ethylene glycol) (PEG) have initiated our research on developing a gentle fabrication method consisting of solution-casting process in sequence with thermal press molding for preparing microneedle (MN) patches with model hydrophilic compounds of rhodamine 6G and fluorescein isothiocyanate (FITC)-labeled collagen encapsulated in the MN tip. (ncku.edu.tw)
- Specifically substituted O-methylcelluloses, 2,3-di-O-methylcellulose and 6-O-methylcellulose (parts B and C of Figure 1, respectively), were used as cellulosic components in blends with poly(ethylene oxide) (PEO) and poly(vinyl alcohol) (PVA). (elsevierpure.com)
- In this study, particles produced from a blend between sericin, alginate and Poly(ethylene glycol) diglycidyl ether (PEG) were used to remove toxic and precious metals from aqueous solutions. (cetjournal.it)
Polyvinyl Alcohol1
- However, there are two dubious ingredients in Earth Breeze laundry sheets: polyvinyl alcohol and polyethylene glycol, both water-soluble petroleum byproducts. (caringconsumer.com)
Ether4
- One route to melt processing of high glass transition temperature polyelectrolytes, such as disulfonated poly(arylene ether sulfone) (BPS), involves mixing a plasticizer with the polymer. (materialstoday.com)
- The main ingredient, sorbeth-230 tetraoleate, is made by esterification of oleic acid and the polyethylene glycol ether of sorbitol. (makingcosmetics.com)
- Plasticized compositions comprising polyamide or polyamide/ionomer blend and poly(trimethylene ether) glycol are provided. (justia.com)
- FTIR (Fourier transform infrared spectroscopy) spectra of the cellulosic-PEO blend films revealed that, while the primary hydroxyl groups at the C-6 position of cellulose interact strongly with ether oxygen in PEO, the secondary hydroxyl groups at the C-2 and C-3 positions show no evidence for polymer-polymer interactions. (elsevierpure.com)
High-density poly1
- Comparative analysis of high-density polyethylene and polystyrene microplastics pollution: Uptake, elimination and results in mussel The high-density polyethylene (HDPE) and the polystyrene (PS), that are typical microplastic contaminants, are ceaselessly detected within the surroundings and have potential hazard to environmental well being. (vlaamseverpleegunie.be)
Water-soluble1
- Polyethylene glycol (PEG) is safe and water-soluble, so PEG₋1500 can be used as a water-soluble base for cosmetic creams and hand creams, and PEG-400 as a water-soluble base for lotion. (sanyo-chemical-solutions.com)
Titanium Dioxide1
- The film coating contains hypromel ose, polyethylene glycol, polysorbate 80 and titanium dioxide. (who.int)
Compounds2
- Since their hydroxyl groups (OH) form controlled intra-and intermolecular hydrogen bonds, the cellulose derivatives are useful as model compounds to investigate the effect of hydrogen bonding in cellulose-synthetic polymer blend systems. (elsevierpure.com)
- PEG's are a polyethylene glycol compounds that are used in a variety of fields. (sanyo-chemical-solutions.com)
Biodegradable1
- New biodegradable block copolymer networks were synthesized from methacrylate-terminated poly(L-lactide) (mLA) and polycaprolactone (mCL) macromers. (upv.es)
Plasticizer1
- PLA, TEM and plasticizer were dry blended and fed into the extruder. (4spe.org)
Miscibility3
- Measurements of viscosity, ultrasonic velocity, refractive index, and density of chitosan (CS)/polyethylene glycol (PEG) blends in buffer solution (0.1 M acetic acid+0.2 M sodium acetate) were carried out for different blend compositions at 30, 40, and 50 degrees C. Using the viscosity data, interaction parameters mu and alpha were computed to determine miscibility. (uni-mysore.ac.in)
- Further, the results revealed that the change in temperature has no significant effect on the miscibility of CS/PEG polymer blends. (uni-mysore.ac.in)
- Thus, these results showed the specific regiochemistry of hydroxyl groups in cellulose and its importance to the study of the miscibility in cellulose-synthetic polymer blends. (elsevierpure.com)
Membranes2
- Polysulfone/polyethylene glycol (PSF/PEG) membranes were prepared by dry/wet phase inversion method. (hindawi.com)
- The MWCNT/QUE/CS blended membranes were prepared by mixing CS, QUE and MWCNT at a ratio of 3:1:1 using a solvent casting method. (utm.my)
Stearic Acid1
- Randomly interesterified (IE) fat blends rich in palmitic acid (used in the European market) and stearic acid (used in the North American market) are most commonly used by food manufacturers, and current intakes are estimated to be 2-10 % of daily energy intake. (springer.com)
Terephthalate1
- Affect of polyethylene terephthalate/ polyamide (PET/PA) bilayer construction on bodily and strength-related properties of superpressure angioplasty balloons Background: Percutaneous transluminal coronary angioplasty (PTCA), together with balloon angioplasty, is a normal medical invasive remedy for coronary artery illness. (vlaamseverpleegunie.be)
Cellulose1
- In the cellulosic-PVA blend films the FTIR analyses suggested that the secondary hydroxyl groups between the cellulose and the PVA were engaged in hydrogen bonds, and, in addition, a hydrogen bond between the anhydroglucose ring oxygen (O-5) of the cellulose and the hydroxyl groups of the PVA was formed. (elsevierpure.com)
Membrane6
- Herein, the preparation of anion exchange membrane (AEM) from brominated poly(2,6-dimethyl 1,6-phenylene oxide) BPPO and dimethylaniline (DMA) by phase-inversion process is reported. (techno-press.org)
- Polyvinyl chloride (PVC) ultrafiltration membrane was prepared by blending 12 wt. (techno-press.org)
- This study aimed to synthesize multi-walled carbon nanotube (MWCNT)/quercetin (QUE)/chitosan (CS) blended composite membrane and analyze their physicochemical properties for wound dressing application in comparison to the pure chitosan (CS) membrane. (utm.my)
- The findings pointed out that the blend of MWCNTs and QUE in the CS matrix produces a membrane with uneven and more hydrophilic surface with water contact angle of 64.70°± 3.7 and low WVTR of 16.26 g/m 2 .day after 24 h. (utm.my)
- The swelling analysis showed that the blended membrane was able to absorb more than 60% of water within 10 minutes, although lower than the pure CS membrane. (utm.my)
- This study revealed that MWCNT/QUE/CS blended membrane could possibly be used as a wound dressing as it may promote moist environment needed for wound healing in addition to its antibacterial and antioxidant properties that may accelerate wound healing process. (utm.my)
Ingredients3
- What makes Dr. SEED so effective is its unique blend of natural ingredients. (ushops.com)
- With its unique blend of natural ingredients, it provides effective active nutrients while reducing irritation, making it suitable for all hair types. (ushops.com)
- Fragrances", which can be any number of blended ingredients, are often the culprit of allergic reactions, leaving your skin red, irritated, and possibly with a rash. (plowipes.com)
Ethanol1
- The blends were dripped in aqueous and alcoholic (ethanol) solutions of CaCl 2 and Ca(NO 3 ) 2 , and then the particles were dried at 100 °C. The simulation of speciation diagrams as functions of pH was performed using Hydra/Medusa software in order to establish the pH to be used in the experiments. (cetjournal.it)
Polymers1
- Hydrogels based on natural polymers (like starch, alginates, guar gum and carrageenan) and synthetic polymers (such as polyvinylpyrrolidone, polyacrylic acid and polyethylene glycol) are widely used in wound care, drug delivery, tissue implants, cosmetic, dental and many other applications. (pharmaceuticalonline.com)
Additive2
- Mechanical, Put on and Thermal Conduct of Polyethylene Blended with Graphite Handled in Ball Milling Additive manufacturing, civil, and biomechanical functions are among the many most vital sectors, the place the filler's presence can considerably enhance the standard of polymeric merchandise blends. (vlaamseverpleegunie.be)
- of PVC in N, N-dimethylacetimide (DMAc) with polyethylene glycol 400 (PEG400) as an additive. (techno-press.org)
Quercetin1
- Rp-HPLC Willpower of Quercetin in a Novel D-α-Tocopherol Polyethylene Glycol 1000 Succinate Primarily based SNEDDS Formulation: Pharmacokinetics in Rat Plasma Regardless of its confirmed efficacy in various metabolic problems, quercetin (QU) for medical use continues to be restricted due to its low bioavailability. (vlaamseverpleegunie.be)
Synthetic1
- Features a blend of vegan synthetic fibres (fibers). (bonjoubeauty.com)
Proprietary blend1
- Viscomaker® Glucose-SORB is a proprietary blend of thickeners and emulsifiers. (makingcosmetics.com)
Aqueous2
- Range of well balanced and stabilized homogeneous aqueous dispersions of carefully selected wax and oil blends. (vescolub.nl)
- EN] The aim of this study is to show that introducing a small fraction of hydrophilic groups into a hydrophobic polyester favor the macrophage activity by accelerating the degradation action in aqueous media. (upv.es)
Seamless2
- Our eyeshadow blending brush is designed to help you create a seamless, blended eye makeup look. (bonjoubeauty.com)
- To lightly define, apply ORGASM X Blush under cheekbone and blend into ORGASM Blush for seamless sculpting. (narscosmetics.eu)
Chemical1
- The addiction of PEG into a blend of sericin-alginate induces chemical modification that can develop better properties to this material. (cetjournal.it)
Chitosan1
- These values revealed that the blend was miscible when the chitosan content was more than 60% of the blend. (uni-mysore.ac.in)
Study3
- This research want to study effect Polyethylene Glycol (PEG) in polymer choAcry/ITO for stability structure of blending choAcry/ITO. (uns.ac.id)
- The current study investigates the effect of the most commonly consumed PSt/PK IE blend on postprandial lipaemia. (springer.com)
- EN] The aim of this study was to evaluate whether mechanical stimulation helps to modulate the redifferentiation of human chondrocytes on adhesive 3D substrates. (upv.es)
Compound2
- For the preparation of the urethane compound according to the invention, a monoisocyanate compound, in particular a monoisocyanate compound resulting from the separate condensation of an asymmetric diisocyanate compound with a reactive compound, is reacted with an alkylene glycol compound in the presence of a polyisocyanate compound. (justia.com)
- Polyethylene glycol (PEG) is a highly safe compound with low irritation and toxicity. (sanyo-chemical-solutions.com)
Pharmaceutical1
- Polyethylene glycol for the pharmaceutical industry is separately lined up as 'MACROGOL' in the Japanese Pharmacopoeia. (sanyo-chemical-solutions.com)
Nutrients1
- Intestinal Rescue is a powerful blend of herbs, nutrients, and prebiotics designed to support and restore the optimal functioning of the intestines. (gethealthyagain.com)
Solution1
- For the addition of the third component in the polymer solution, polyethylene glycol (PEG) is one of the most important additives used. (hindawi.com)
Effect2
- BPS and PEG are miscible, and the effect of PEG molecular weight (in the range of 200-600 g/mol) and concentration on the T g of BPS/PEG blends was investigated. (materialstoday.com)
- The fluffy, tapered bristles allow you to easily apply and blend eye shadow, creating a natural-looking gradient effect. (bonjoubeauty.com)
Material1
- Polymer ChoAcry/ITO was added glycol is one of the material polymer liquid crystal modifications. (uns.ac.id)
Film1
- A direct compression manufacturing process - involving blending, compression and film coating - has been developed. (who.int)
Primary1
- Both ends of polyethylene glycol (PEG) are primary alcohols, making it easy to esterify and etherify. (sanyo-chemical-solutions.com)
Made1
- The microbeads used in some exfoliators are actually made of a plastic substance called polyethylene-a, replicating the sensation of natural exfoliants. (plowipes.com)