• The technology offers a new platform for resin development that uses patented polyamide polyol technology to deliver hardness, adhesion, hydrolysis resistance and abrasion resistance that far exceed other direct-to-metal (DTM) water-borne systems, as well as a topcoat on primers. (lubrizol.com)
  • Excellent thermal stability, excellent abrasion resistance and flexural resistance. (dust-filtration.com)
  • E-TPU offers excellent abrasion resistance, cold resistance, and impact resilience. (emergenresearch.com)
  • E-TPU is an environment-friendly material with light density and great elasticity, strong abrasion resistance, and high flexing endurance when compared to standard shoe materials. (emergenresearch.com)
  • ACT acknowledges that there are extreme wear situations that may require higher levels of abrasion resistance. (decorativefabricsdirect.com)
  • They have a significant impact on tread and tire hardness, rebound resilience, abrasion resistance, load capacity , rolling resistance and low-temperature flexibility. (blickle.ca)
  • Here, polymer blends containing 0-4wt% talc, a crystal nucleating agent and 0-1 wt% of a polymeric carbodiimide (CDI), an anti-hydrolysis agent, were melt blended and compression molded into plaques. (4spe.org)
  • As they are used where good UV resistance is required, such as automotive coatings, the isocyanate component also tends to be UV resistant and hence isocyanate oligomers or prepolymers based on Isophorone diisocyanate are generally used. (wikipedia.org)
  • PPS is a high temperature resistant thermoplastic fiber with excellent hydrolysis resistance. (fazendomedia.com)
  • Is this resistance the result of bacteria evolving new genes in response to the presence of antibiotics, or are antibiotic-resistant bacteria selected for in the environment by possessing antibiotic resistance genes beforehand? (icr.org)
  • A brief look at an example of penicillin resistance reveals the increase in the frequency of antibiotic-resistant organisms since the time when antibiotic use became common. (icr.org)
  • 1] In 1980 it was estimated that 3-5% of S. pneumoniae were penicillin-resistant and by 1998, 34% of the S. pneumoniae sampled were resistant to penicillin.1 Antibiotic resistance by other organisms reflects the same trend observed between S. pneumoniae and penicillin. (icr.org)
  • Because the binding sites for these antibacterial drugs overlap, cross resistance is sometimes observed among lincosamides, macrolides and streptogramin B. Macrolide-inducible resistance to clindamycin occurs in some isolates of macrolide-resistant bacteria. (nih.gov)
  • Has excellent heat resistance and chemical properties, resistant to most concentrated inorganic acids, alkali resistance is slightly worse, for other chemical reagents and organic solvent is very stable. (360felt.com)
  • Compared PU with plastic, polyurethane not only offers excellent impact resistance, but also offers excellent wear resistant and high tensile strength. (flexible-coupling.top)
  • It is ideally suited for use in applications that must maintain dimensional stability, thermal resistance and strength over a wide temperature range. (thomasnet.com)
  • The plastic provides long-term creep and fatigue resistance, optimal dimensional stability and high resistance to chemicals, moisture and fuels such as gasohol and oxygenated fuels. (aerospace-technology.com)
  • Acetal (Polyoxymethylene or POM) provided by Interstate Plastics is a tough, machinable thermoplastic with a high modulus of elasticity, high strength, good rigidity, dimensional stability, and resistances to moisture, chemicals and solvents. (interstateplastics.com)
  • Acrylic polyols are generally used in higher performance applications where stability to ultraviolet light is required and also lower VOC coatings. (wikipedia.org)
  • Excellent hydrolysis resistance capability, and strong chemical stability. (dust-filtration.com)
  • PTFE filter bags has excellent chemical stability and heat resistance. (dust-filtration.com)
  • These materials have become increasingly popular in various industries due to their excellent thermal stability, chemical resistance, and durability. (polymer-process.com)
  • ETHANOX™ 330 is a hindered phenolic antioxidant that is specifically engineered for exceptional protection and long term stability in wire and cable insulations and jacketing applications. (chempoint.com)
  • In this way, it was possible to overcome the issues related to the stability of classical sol-gel systems when sol-gel transition is initiated by acid / base catalysts added to the composition and as a result of hydrolysis / condensation processes taking place the viscosity of the systems changes drastically. (europa.eu)
  • The outstanding resistance of the belts to chemicals and even hot water makes them highly reliable with a long service life. (habasit.com)
  • It has excellent compression set resistance that makes it highly durable and long-lasting with low outgassing, resistance to chemicals, and is non-corrosive. (iqsdirectory.com)
  • It has remarkable dielectric properties and provides resistance against shear stress, natural aging, oxidation, and hydrolysis. (imarcgroup.com)
  • Most zirconia purification techniques include the following: hydrolysis method (spray pyrolysis), alkali oxidation decomposition way, lime melting method or plasma arc technique, calcium metal oxidation process, citric acid decomposition and decomposition of the powder, precipitation method, colloid methods, hydrolysis method, and chlorination. (abbaworld.com)
  • It is a high-quality plastic suitable for aerospace industry applications as it can withstand high radiation levels and has a low flammability rating. (aerospace-technology.com)
  • PEEK provides long-term service temperature of + 250 C and has excellent radiation and chemical resistance. (plastemart.com)
  • Similarly to PEEK, Ultem is a cost-effective solution if continuous temperatures below 338°F are acceptable for the application. (aerospace-technology.com)
  • The TPU Polyether scraper bars are particularly suitable for applications involving higher temperatures and humidity, where hydrolysis resistance is required. (habasit.com)
  • Torlon®, on the other hand, is known for its outstanding mechanical properties at elevated temperatures up to 275°C while maintaining excellent chemical resistance. (polymer-process.com)
  • Vespel®, for example, is known for its exceptional wear resistance at elevated temperatures making it ideal for use in bearings and bushings. (polymer-process.com)
  • These water-borne, self-crosslinking PUDs provide hydrolysis and chemical resistance for excellent protective properties. (lubrizol.com)
  • Polyetheretherketone (PEEK) has an extremely high temperature, mechanical, electrical and chemical resistance. (aerospace-technology.com)
  • PEI offers high heat and chemical resistance, as well as high strength and modulus. (aerospace-technology.com)
  • For example, the plastic can be used as gaskets for fuel system components due to its chemical resistance to fuels. (aerospace-technology.com)
  • P84 FILTER BAGS is made with flame retardant fiber, has excellent resistance to chemical corrosion. (dust-filtration.com)
  • Food industry applications require belts offering excellent release, efficient and easy cleanability, and chemical and hydrolysis resistance for wet and humid environments. (habasit.com)
  • Celazole PBI stands out from the rest due to its unmatched combination of temperature resistance up 800°F along with outstanding chemical inertness which makes them ideal candidates as seals/gaskets within harsh environments such as petrochemical plants. (polymer-process.com)
  • In combination with the good mechanical performance of Fluorosint and its inherent outstanding chemical and hydrolysis resistance, this feature opens numerous application possibilities in food, pharmaceutical and medical* industries. (theplasticshop.co.uk)
  • Thermoplastic polyurethane is a kind of polyurethane plastic with various qualities such as flexibility, transparency, and resistance to oil, grease, and abrasion. (emergenresearch.com)
  • TPUs exceed typical thermoplastic materials in terms of abrasion and scratch resistance, which is critical for applications such as automobile interior components, sports and leisure equipment, technical parts, and specialty cables. (emergenresearch.com)
  • Good flame retardant and excellent heat resistance function. (dust-filtration.com)
  • Good resistance to hydrolysis. (dust-filtration.com)
  • The most varied belt properties such as good release properties, high level of resistance to oil and grease, resistance to hydrolysis or ease of cleaning safeguard our customers' process chain and guarantee the highest product quality. (forbo.com)
  • This gives the foam higher load-bearing capacities, good water resistance, and lower thermal conductivity. (iqsdirectory.com)
  • Has good heat resistance, corrosion resistance and flame resistance. (360felt.com)
  • Polycarbonate polyols are more expensive than other polyols and are thus used in more demanding applications. (wikipedia.org)
  • ULTEM® offers superior thermal performance with continuous operating temperature ranges from -40 °C (-40°F)to +170 °C (+338°F). Its unique combination of heat resistance coupled with flame retardancy makes it an ideal candidate for electronic components like connectors or switches that require both safety features along with durability under harsh conditions. (polymer-process.com)
  • The excellent sliding properties and hydrolysis resistance make PEEK the high performance material perfect for almost all applications with high thermal and mechanical load. (plastemart.com)
  • Caprolactone-based polyols produce polyurethanes with enhanced hydrolysis resistance. (wikipedia.org)
  • Special polyurethanes for high dynamic and mechanical loads as well as conductive and optimised rolling resistance versions round out the product range. (blickle.ca)
  • In this work we examine the influence of talc and a polymeric carbodiimide on the hydrolytic degradation resistance of a commercially available Poly(L-Lactic acid) PLLA. (4spe.org)
  • However, in vitro studies affirm that restorative materials surface, such as dental ceramics and dental composites, may be altered by the use of TAF 9 , which interferes in their microhardness and surface roughness, increasing porosity and allowing dyes and acids penetration, dental plaque accumulation, and hydrolysis of the polymeric matrix 10 . (bvsalud.org)
  • High-temperature plastics offer several advantages over traditional materials such as metals and ceramics due to their lightweight nature, corrosion resistance and ease of processing. (polymer-process.com)
  • The increase in resistance among these organisms clearly indicates a change in the frequency of antibiotic resistance genes. (icr.org)
  • Bio TPU's performance and benefits are comparable to, and sometimes even better than traditional petroleum-based TPU, and can range in hardness from 82 Shore A to 55 Shore D. Bio TPU is commercialized as ESTANE ® ECO (previously known as Pearlthane™ ECO) for molded, extruded and coextruded end applications, and as Pearlbond™ ECO for adhesive formulations. (lubrizol.com)
  • Acetal polyoxymethylene (POM) offers low wear, resistance to repeated impact, as well as high strength and rigidity in a broad temperature range. (aerospace-technology.com)
  • PAN - standard applications up to 19 bar, temperature range from -30°C to +80°C. (issuu.com)
  • PAN-MF - mobile applications, increased temperature range from -60°C to 100°C in combination with a high pressure range up to 27 bar. (issuu.com)
  • Suitable for both extrusion and injection molding, Fortron FX4382T1 PPS from Ticona is a lighter, more ductile and tougher material choice to replace metals and other thermoplastics that are traditionally used in food handling applications. (thomasnet.com)
  • They are suitable for use with compressed air and vacuum, pressure range up to 6 bar, especially for applications in confined spaces or where optimum use of the available space is an essential requirement. (issuu.com)
  • Until now, however, despite their many advantages for hygienic conveying, they have not been suitable for steeper incline/decline applications due to limitations on attaching accessories, such as cleats, which prevent goods from rolling down. (habasit.com)
  • Each material has its unique set of properties that make it suitable for specific applications. (polymer-process.com)
  • 5000 - 14900 Double Rub Rating or code "MD" is suitable for medium use home decor upholstery applications such as living rooms. (decorativefabricsdirect.com)
  • 15000 - 29900 Double Rub Rating or code "RD" is suitable for everyday regular and heavy use home decor upholstery applications. (decorativefabricsdirect.com)
  • These materials have a wide range of applications in various industries, including aerospace, automotive, electronics and electrical equipment manufacturing. (polymer-process.com)
  • Exhibiting hydrolysis resistance as well as moisture absorption of (thomasnet.com)
  • It also works well in applications with high moisture content and frequent dew point crossings. (fazendomedia.com)
  • Acetal is ideal when working in wet environments as it absorbs minimal amounts of moisture, and with a high level of heat resistance, can be heated or cooled without affecting form or dimensionality. (interstateplastics.com)
  • Polyurethane has better abrasion and tear resistance than rubbers, and offering higher load bearing capacity. (flexible-coupling.top)
  • Blickle has developed four different polyurethane types , tailor-made for different applications. (blickle.ca)
  • It is the self-cleaning property of polyurethane surfaces that make the material ideal for this application. (polytec-industrial.com)
  • Another advantage of polyurethane star feeders is their high wear resistance. (polytec-industrial.com)
  • Results indicate that the presence of talc as the sole ingredient in the formulation increases the crystallization rate and this translates to an increase in the degree of crystallinity of compression molded plaques and a modest improvement in hydrolytic degradation resistance as compared to unfilled PLLA. (4spe.org)
  • Moreover, the isolated enzyme displayed remarkable resistance to acid proteases, neutral proteases and pepsin. (nih.gov)
  • Especially, outdoor applications present great challenge due to the severe weathering conditions including UV-light degradation and poor humidity adhesion of inks to glass. (europa.eu)
  • These favourable properties increase the potential of the enzyme in the food industry and animal feed applications. (nih.gov)
  • They are popular in the field of thermal insulation ceramics for their toughness, high wear resistance, great thermal insulation properties, as well as being similar to steel. (abbaworld.com)
  • Epsan's GFH product groups provide high quality products particularly for under-the-hood applications that require hydrolysis resistance and thermal resistance. (epsan.com)
  • Festo pneumatic tubing is just as reliable at meeting standard requirements as it is at operating in extreme conditions such as heat, welding spatter, high pH values or hydrolysis resistance. (festo.com)
  • It is envisioned that this work will help pave the way for the usage of PLA in durable applications where long-term resistance to humidity is anticipated. (4spe.org)
  • Significant humidity resistance of the hybrid sol-gel inkjet inks printed on glass surface that reaches more than 1000 hrs (40oC, 100 % RH) and acceptable UV-light fastness, especially when modified with inorganic pigments, make them product of choice for glass decoration for indoor and outdoor usage achieving economic and flexible custom made designs. (europa.eu)
  • In answer to these challenges, the new belts offer improved temperature- and hydrolysis resistance, reduced belt edge fraying, and less wicking through improved belt impregnation. (habasit.com)
  • The belts' features have been extensively tested in lab and field, in demanding bakery applications that extend from handling fresh biscuit and bread dough, to cracker production, pizza topping lines, and oven out- and in-feeds. (habasit.com)
  • By using Habasit Cleanline TPO belts on these applications, food processors can now clean their entire line using the same operation, ensuring significant cost savings on labor, water, electricity, and above all, time. (habasit.com)
  • Polyphenylene Sulfide facilitates food handling applications. (thomasnet.com)
  • Fortron® FX4382T1 polyphenylene sulfide (PPS) from Ticona is ideally suited for use in food processing equipment and conveyor system applications such as high-precision chain links. (thomasnet.com)
  • Although A. fumigatus is not a phytopathogen and thus not a target for fungicide application, many azole fungicides show in vitro activity against A. fumigatus ( 12 , 13 ). (cdc.gov)
  • Although clindamycin phosphate is inactive in vitro , rapid in vivo hydrolysis converts this compound to the antibacterially active clindamycin. (nih.gov)
  • Discover the innovative world of high temperature injection molded plastics and their versatile applications in various industries with our insightful blog. (polymer-process.com)
  • In this article, we will explore the benefits and applications of high-temperature injection molded plastics in construction projects. (polymer-process.com)
  • All treads have a consistently high quality level, wear-resistance and resilience. (blickle.ca)
  • Indirect composites were introduced in Dentistry to reduce the consequences of polymerization shrinkage and improve resistance to wear 1-3 . (bvsalud.org)
  • Furthermore, ATSDR acknowledges additional uncertainties inherent in the application of the procedures to derive less than lifetime MRLs. (cdc.gov)
  • The world of plastics is constantly evolving, with new applications such as high-performance polymers, additive manufacturing, and bioplastics continually emerging to transform the field. (4spe.org)
  • High-temperature thermoplastics are used in applications where traditional plastics would fail under extreme conditions such as aerospace, automotive, electronics manufacturing and oil & gas exploration. (polymer-process.com)
  • Several types of fluoride solutions may be used for topical application, such as, 1.23% or 2% gels, 0.05% solutions for daily mouthrinsing, and varnishes indicated for intensive therapy6. (bvsalud.org)
  • TEONEX® Q51 is considered the standard PEN film in the TEONEX® line, whereas TEONEX® Q83 offers superior shrink resistance. (tekra.com)
  • Ethanox™ 330 is featured with superior resistance to hydrolysis which makes it excellent for use in tough applications and harsh conditions such as power cables and wires. (chempoint.com)
  • Background: Mannoproteins, mannose-glycosylated proteins, play an important role in biological processes and have various applications in industries. (bvsalud.org)
  • Iodomethane is off-gas into air and be transported off-site by meteorologi- approved in the United States for pre-plant application into cal processes. (cdc.gov)
  • Occupational exposure to an intermediate in the manufacture of some pharmaceu- iodomethane may occur 8 hours per day, 5 days per week, ticals, in methylation processes, and in the field of micro- during the application season. (cdc.gov)
  • It is important that the tubing is maintained regularly so that defects can be ruled out and the longevity and functionality of the pneumatic application is not jeopardised. (festo.com)