Aluminum internal surfaces therefore corrosion casting. Medical search. Frequent questions

There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable. (wikipedia.org)
Cast aluminium alloys yield cost-effective products due to the low melting point, although they generally have lower tensile strengths than wrought alloys. (wikipedia.org)
Aluminium alloys are widely used in engineering structures and components where light weight or corrosion resistance is required. (wikipedia.org)
Aluminium alloys can be improperly heat treated, causing internal element separation which corrodes the metal from the inside out. (wikipedia.org)
A team led by researchers from Oak Ridge National Laboratory (ORNL) is developing a lower-cost cast aluminum (Al) alloy capable of at least a 50 ˚C temperature increase over the current cylinder head alloys 319 and 356 for use in light duty engines. (greencarcongress.com)
Investment casting accommodates a wide range of materials suitable for aerospace applications, including titanium, nickel-based superalloys, aluminum alloys, and stainless steels. (zhycasting.com)
Tin and its alloys are cast using most conventional techniques, including gravity die casting, pressure die casting, and centrifugal casting. (machinedesign.com)
Essential to the casting of tin-rich alloys is the need to reduce microstructure segregation, which occurs during solidification. (machinedesign.com)
Because of their low-melting points, tin-rich alloys can be cast in carbon-steel or rubber molds. (machinedesign.com)
For spun pewter products, antimony content is usually below 7%, and pewter casting alloys contain 7.5% antimony and 0.5% copper. (machinedesign.com)
Low melting point and extreme fluidity of these alloys produce sound, intricate castings inexpensively and with little wear on molds. (machinedesign.com)
Antimony, copper, and lead are the principal additions to tin in die-casting alloys. (machinedesign.com)
These alloys are mainly gravity or centrifugally die cast. (machinedesign.com)
Noncritical parts such as costume jewelry and small decorative items such as figurines can be made by casting pewter and other low-melting tin-based alloys in rubber molds. (machinedesign.com)
Tin die-casting alloys are suitable for low-strength precision parts and bearings for household appliances, engines, motors and generators, and gas turbines. (machinedesign.com)
Forged objects of aluminum or aluminum alloys are called aluminum forgings. (metal-forging.com)

We use alodin powder, after 72 hours of salt spray test, can be very good anti-corrosion, suitable for a variety of adverse weather. (hanway.com.cn)
Our Wagner Tuning charge air coolers are equipped with a heat-conducting anti-corrosion coating, which ensures a lasting cooling effect. (wagner-tuningshop.de)
All WAGNERTUNING intercooler are equipped with a heat-conductive anti corrosion coating to ensure a lasting cooling effect. (europerformancecenter.com)
Anti-corrosion and endure high temperature. (indymogul.com)

The casting tip has a smooth surface finish, so as to ensure smooth and consistent casting, which can resist the corrosion of liquid aluminum and ensure the purity of the aluminum plate. (alalloycasting.com)
The opening surface and the coating of the working surface are smooth, and can resist the corrosion of liquid aluminum, ensure the purity of the aluminum foil. (aluminiumceramicfiber.com)

All exterior surfaces of Design OLV-8 and OLV-12 are rounded to minimize outdoor dirt and debris build-up and present a vandal- resistant profile. (thomasnet.com)
Integral reflectors feature an electro-brightened, corrosion-resistant anodized sealed finish to ensure maximum efficient light output. (thomasnet.com)
Although soft, conformable, and corrosion resistant, their low mechanical strength must be boosted by bonding to steel, cast iron, or bronze backing materials. (machinedesign.com)
Engineered with corrosion-resistant materials for indoor/outdoor applications. (avprosupply.com)
WATERPROOF & BETTER HEAT DISSIPATION DESIGN - Die-cast aluminum metal body and impact-resistant, Acrylic lens IP65 waterproof rate for outdoor wet locations. (indymogul.com)
SUS316 is more resistant to corrosion than 304, especially in high temperature and harsh environments. (3qmachining.com)
The alloy used for mini-implant production should be nontoxic, biocompatible, have good mechanical properties, and be stress, tension, and corrosion resistant 8-9 . (bvsalud.org)

The caster tip is used together with the ears, spacers, and strips to make the caster tip a channel, so that the molten aluminum in the headbox can flow into the inner cavity of the caster tip and adjust the uniformity. (alalloycasting.com)
Can meet the mechanical requirements of molten aluminum. (aluminiumceramicfiber.com)
The role of the cast filter is to make the turbulent molten aluminum stable, uniform and clean after passing through the honeycomb pores of the ceramic foam. (aluminum-casting-filter.com)
This significantly reduces the scrap rate of castings (caused by impurities in molten aluminum), thereby saving production costs. (aluminum-casting-filter.com)
The cast filter has excellent wear resistance and corrosion resistance of molten aluminum, can effectively remove impurities, reduce trapped gas, provide laminar flow, and the filter metal is significantly cleaner. (aluminum-casting-filter.com)
The ceramic foam filter is a high-aluminum phosphate-free product with high porosity and chemical mechanical stability, excellent heat resistance and corrosion resistance to molten aluminum. (aluminum-casting-filter.com)
When filtering molten aluminum, it can effectively remove impurities, reduce trapped gas, and provide laminar flow. (aluminum-casting-filter.com)
Ceramic foam filters are widely used to filter molten aluminum in primary aluminum and secondary aluminum foundries. (aluminum-casting-filter.com)

Some porosity is inevitable in any casting process, but certain applications such as pressurized equipment may require that the casting is completely leak-proof. (gabrian.com)

The material has excellent properties including high strength and hardness, abrasion and corrosion resistance, high temperatures, resistance to oxidation, good insulation, and a large area. (actionext.com)
A new transparent ultra-thin material consisting ultra-fine particles of alumina coated on metals or ceramics can be used to improve surface hardness and corrosion resistance. (actionext.com)
After quenching, the surface hardness can reach HRC55. (3qmachining.com)
It would be desirable to prepare a cleaning solution for cooling systems which is effective in removing all common manner of scale and corrosion, in removing solder bloom, in maintaining hardness ions in solution even in highly alkaline environments, and which does not utilize phosphates in its composition. (justia.com)
Moreover, these compositions are effective in maintaining hardness ions such as calcium, aluminum, and iron in solution in the pH 9-14 range. (justia.com)

You can also paint , powder-coat , or anodize aluminum castings to enhance physical wear resistance, prevent corrosion, and improve appearances. (gabrian.com)
Ultra-fine alumina can also be used in the metamorphic nucleation of cast iron to increase wear resistance. (actionext.com)

In a wet environment, galvanic corrosion can occur when an aluminium alloy is placed in electrical contact with other metals with more positive corrosion potentials than aluminium, and an electrolyte is present that allows ion exchange. (wikipedia.org)

The alloy has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 1500°F (815°C). Used for gas-turbine components (blades, rings, and discs), bolts, tube supports in nuclear steam generators, die-casting inserts and cores, and exhaust valves in internal-combustion engines. (hynickelalloy.com)
The alloy has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 1500°F (815°C). (hynickelalloy.com)
It has now been surprisingly discovered that cleaning solutions for cooling systems may be prepared which are effective in removing scale, corrosion and oxidation products, and solder bloom without causing blackening or corrosion of the metal surfaces. (justia.com)

Rugged die cast design ensures LED's operate at optimum temperature for long life. (globaluxlighting.com)
These materials offer excellent strength-to-weight ratios, high-temperature resistance, and corrosion resistance, making them ideal for aerospace components that operate in demanding environments. (zhycasting.com)
Changes in the ambient temperature can cause rapid changes to surface or interface electron transport, and also ion valence. (actionext.com)
The temperature range between melting and boiling points exceeds that for nearly all other metals (which facilitates casting). (machinedesign.com)
Other applications include low-temperature solders, seals for glass and other heat-sensitive materials, foundry patterns, molds for low-volume production of plastic parts, internal support for tube bending, and localized thermal treatment of parts. (machinedesign.com)
The casting temperature is usually 50-110°C higher than the liquidus of the alloy. (metal-forging.com)
Castertips with excellent non-wetting properties, low thermal conductivity, high temperature stabilities, uniform density, smooth surfaces and close tolerance, are superior products for the continuous casting of aluminum strips. (aluminiumceramicfiber.com)

Impregnation can be used on casts to reduce moisture retention and internal corrosion. (gabrian.com)
Ultra-fine powder alumina is sensitive to external moisture because of its large surface area. (actionext.com)
The surface of the cylinder rod is exposed to the atmosphere when extended is therfores liable to suffer from the effects of knocks, dirt, moisture and corrosion. (roymech.co.uk)

Investment casting produces components with exceptional dimensional accuracy, surface finish, and mechanical properties. (zhycasting.com)
Investment casting offers excellent heat resistance and durability, as the materials used can withstand high temperatures and maintain their mechanical properties under challenging conditions. (zhycasting.com)
Aluminum forging is a processing method that uses a forging machine to apply pressure to an aluminum billet to plastically deform it to obtain a forging with certain mechanical properties, certain shape and size. (metal-forging.com)
At the same time, due to the preservation of the complete metal streamline, the mechanical properties of forgings are generally better than those of castings of the same material. (metal-forging.com)
It has good corrosion resistance, mechanical properties, good stamping and bending hot workability, and standard SUS304 is non-magnetic. (3qmachining.com)

Internal components constructed of gray cast iron, surface-treated aluminum, steel, and stainless steel to protect from corrosion. (lesker.com)
In applications where the cylinder is used infrequently or involves possible contact with corrosive materials, stainless steel, aluminum or brass may be used as the cylinder material. (roymech.co.uk)
The design of this reel is sleek and modern with its magnesium body, skeletal rotor, forged main gear, 11 stainless steel bearings and a machined aluminum handle with Winn Dri-Tac knob. (bassnedge.com)

The twin-roll caster tips, also called nozzle or ejector, is used to adjust the width of continuous sheet casting. (alalloycasting.com)
The casting tip determines the width of the aluminum plate during continuous casting. (alalloycasting.com)
The hard casting tip is specially designed and optimized to produce high-quality aluminum continuous sheet castings for double-roller casters, which are made of ceramic fibers and binders. (alalloycasting.com)
AdTech provides all the components required for continuous casting of tip components, such as end baffles, partitions, internal baffles, and boron nitride coating . (alalloycasting.com)
Casting generally adopts vertical or horizontal water-cooled semi-continuous casting method. (metal-forging.com)
The water-cooled semi-continuous casting method is to introduce the liquid metal into the water-cooled crystallizer through the launder, so that the liquid metal is cooled to form a solidified shell, which is pulled by the base of the casting machine or evenly lowered by its own weight to come out of the crystallizer to form a billet. (metal-forging.com)
In addition, the continuous casting and rolling process of aluminum strip has also been developed. (metal-forging.com)
Aluminum Silicate Castertip is the key component of aluminum continuous casting machine which directly affects the quality of aluminum sheets. (aluminiumceramicfiber.com)
2. Choose 30-60ppi for semi-continuous casting, and choose 50, 60ppi for high-quality aluminum profiles or plates. (aluminum-casting-filter.com)

The use of ultrafine alumina can be used to synthesize aluminum alloy ultrafine composite materials and a new type composite ceramic material. (actionext.com)
The ultrafine alumina ceramic bioceramic is not significantly corroded in a physiological milieu and has good structural compatibility. (actionext.com)
Aluminum Silicate Castertip is composed of ceramic fibers and other refractory materials. (aluminiumceramicfiber.com)
The aluminum silicate caster tips produced by our factory are made of ceramic fibers and other refractory materials. (aluminiumceramicfiber.com)
Ceramic Filter Egypt Aluminium Industry is widely used in aluminum ingot and aluminum rod foundries in North Africa. (aluminum-casting-filter.com)
Engineers from Egyptalum introduced that Ceramic Filter Egypt Aluminium Industry is mainly used in foundries and foundries to filter aluminum and alloy s. (aluminum-casting-filter.com)
30ppi 40ppi Foundry Filter is the most commonly used ceramic foam filter in the aluminum casting industry. (aluminum-casting-filter.com)
Ordinary aluminum casting usually uses 10-40ppi ceramic filter plates. (aluminum-casting-filter.com)
Aviation and high-quality aluminum materials usually use 30-60ppi ceramic filter plates. (aluminum-casting-filter.com)

In order to improve the ingot structure and surface quality of vertical casting, electromagnetic crystallization grooves, short crystallization grooves and hot top casting methods have also been developed (see solidification of metals). (metal-forging.com)

The caster tip is custom designed according to the casting operation and can be used for vertical, inclined and horizontal casters. (alalloycasting.com)

Choosing the most suitable aluminum alloy, die design considerations , and carrying out die-casting operations are all vital stages of product development. (gabrian.com)
adoption imported materials from abroad, able to withstand heavy things, strong internal, suitable for outdoor environment. (hanway.com.cn)

The process of die-casting aluminum parts is renowned for its exceptional dimensional accuracy and smooth, even surface finish. (gabrian.com)

Historically, these were the first materials to be die cast. (machinedesign.com)
Because of the different molding methods, the selected aluminum materials are naturally different. (metal-forging.com)
Today in the transportation industry, cooling systems used to provide cooling for internal combustion engines contain a number of diverse materials in order to maximize cooling efficiency. (justia.com)
The extreme conditions in which these materials function are ideal for the formation of a variety of corrosion products such as metal oxides, hydroxides, and carbonates, as well as for the deposition of scale, particularly when "hard" water, i.e. water containing appreciable quantities of magnesium, and/or calcium ions is used. (justia.com)
5) in 1978 put forth a the- on exposed surfaces led to studies that revealed surface-associ- ory of biofilms that explained the mechanisms whereby micro- ated microorganisms (biofilms) exhibited a distinct phenotype organisms adhere to living and nonliving materials and the with respect to gene transcription and growth rate. (cdc.gov)

They are then hard-coat anodized to a military specification throughout to prevent corrosion of all surfaces including the internal water passages. (diamondperformanceparts.com)
The inner surface of the cylinder tube is very smooth to prevent wear and leakage. (roymech.co.uk)

The best known and most commonly applied secondary processes for die casting are trimming, machining, impregnation, and surface treatments. (gabrian.com)
You can apply surface treatments to a product in several ways to enhance its physical and chemical properties after completing other processes. (gabrian.com)

Projected conditions for internal combustion engines in 2025 push light-duty engine exhaust temperatures into the low end of gas turbine regimes, Haynes said. (greencarcongress.com)
Used for gas-turbine components (blades, rings, and discs), bolts, tube supports in nuclear steam generators, die-casting inserts and cores, and exhaust valves in internal-combustion engines. (hynickelalloy.com)
Electric drives would seem to me to be the first choice to consider for an application, but circumstances may give the edge to internal combustion engines. (newmars.com)

The wax patterns used in investment casting can be designed to incorporate intricate features, internal cooling channels, and precise aerodynamic shapes, meeting the stringent requirements of aerospace applications. (zhycasting.com)
Investment casting allows for the production of lightweight components with thin walls and intricate internal structures. (zhycasting.com)

Investment casting can significantly reduce lead time compared to traditional manufacturing methods. (zhycasting.com)

The ruggedized R style 212R keypad features a cast aluminum housing and all-metal faceplate that has been treated with polyurethane to increase its protection from corrosion. (cepro-iq.com)
Instead, machining for die-cast parts is most often required when creating features unachievable through the die casting process. (gabrian.com)
3. aluminium pressure die casting process is a preferred high-tech product with such features as custom aluminum fabrication. (hanway.com.cn)
The flexibility of investment casting enables the production of tailored components with specific features, such as airfoil shapes, cooling passages, or reduced part count through complex integrations. (zhycasting.com)
The Lew's HyperMag Spinning Reel features a machined aluminum handle that is designed to provide anglers with optimum comfort and control when fishing. (bassnedge.com)

Nimonic 80A /UNS N07080 /SEW VDIUV W. Nr. 2.4952 /AFNOR NC20TA/NiCr20TiA1 /GH4080A is a nickel-chromium alloy similar to alloy 75 but made precipitation hardenable by additions of aluminum and titanium. (hynickelalloy.com)
A nickel-chromium alloy similar to NIMONIC alloy 75 but made precipitation hardenable by additions of aluminum and titanium. (hynickelalloy.com)
There were no significant differences in the proportions of titanium and aluminum in the mini-implant alloy of the five commercial brands. (bvsalud.org)
To meet these requirements, the titanium alloy (Ti-6Al-4V) chosen for manufacture of mini-implants incorporates aluminum (Al) and vanadium (V) into its composition along with commercially pure titanium (cpTi) 10 . (bvsalud.org)

The most important cast aluminium alloy system is Al-Si, where the high levels of silicon (4-13%) contribute to give good casting characteristics. (wikipedia.org)
Our products have a good surface and internal quality. (hbsxy.com)
Alumina ultra-fine has a good pore-size distribution, a high pore-volume, atomic-coordination on the surface (surface area up to 60-400m2/g), and a smooth surface with reducing particle size. (actionext.com)
The tin-nickel alloy is coated on disc-brake pistons because of its good resistance to wear and corrosion. (machinedesign.com)
Good insulation, control parameters in the casting of sheets. (aluminiumceramicfiber.com)

CCTV system technology and CCTV equipment is used in both internal and external environments to monitor and protect property, vehicles and valuables as well as a means to boost plant and process efficiency. (slideshare.net)
Rugged die cast aluminum housing withstands outdoor environments. (globaluxlighting.com)
Built to last , the ACR RCL-100 LED light is built with a die-cast aluminum case that is triple primed and painted with UV stabilizers to withstand years of exposure to harsh marine environments. (thegpsstore.com)
Since that time, the film microorganisms have been shown to elicit specific mech- studies of biofilms in industrial and ecologic settings and in anisms for initial attachment to a surface, development of a environments more relevant for public health have basically community structure and ecosystem, and detachment. (cdc.gov)

I think this is a great choice, but I made mine from 6061 aluminum, which is not quite as strong, but cheaper, and will almost always be on-hand at any machine shop. (jcna.com)

4. The customized zinc alloy wire rope has obvious internal corrosion. (coatedsteelwirerope.com)
7. The surface of customized zinc alloy wire rope is worn or corroded, and there are a certain number of broken wires. (coatedsteelwirerope.com)

Outer surface treated with durable power coating to provide resistance to corrosion, rust, weathering and or degradation. (globaluxlighting.com)
A catalyst or catalyst carrier with a high contact surface is ideal for degradation, creating an uneven atomic structure, and increasing the contact area. (actionext.com)

Constructed with a rugged, rust proof die-cast aluminum housing and finished with a UV stabilized powder coat paint, this product will be protected against fade and wear and maintain its durability over time. (indymogul.com)

EAST INSTALLATION & WIDE RANGE OF USES:-The canopy lights have 2 Types of installation method, upports pendant mounting or direct surface mounting.High thermal conductivity, low light decay, solid color light, no ghosting, no glare, no stroboscopic, protect your eyes, and never cause any light pollution. (indymogul.com)

It provides durability, as it is made from strong aluminum material that can withstand any bumps or drops during an outing. (bassnedge.com)

However, it is crucial to do thorough research before implementing any of these coatings - their feasibility depends on your application, and the decision is not as straightforward as it is with aluminum extrusions. (gabrian.com)

Because of the high pressures involved during die casting, excess material forms around the parting line of the cast. (gabrian.com)
By minimizing material usage through near-net-shape casting, investment casting helps achieve significant weight savings compared to traditional manufacturing methods. (zhycasting.com)
This material can be used for surface protection on machinery, tools and chemical pipes. (actionext.com)
The ultra-fine alumina substrate is also a common material. (actionext.com)
The casting tip is made of nanoscale fiber composite material and used for crystallization and size control of aluminum foil casting. (aluminiumceramicfiber.com)
The reflector is made of imported high-purity aluminum material, with multiple reflective surface designs, forming various light distribution requirements. (mflighting.com)

Performance engineered internal heat dissipation fins provide superior thermal management for lens life and reliability. (globaluxlighting.com)
The heavy-duty, injection-molded polycarbonate lens protects against impact and corrosion. (ecmag.com)

The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and at the same time the best possible internal air flow. (europerformancecenter.com)

Pistons are usually made of cast iron or steel. (roymech.co.uk)
3. The steel wire on the surface layer of the steel wire rope is corroded or worn up to 40% of the diameter of the original wire on the surface. (coatedsteelwirerope.com)
The principle is to coat a dense iron oxide film on the surface of the steel parts. (3qmachining.com)

Construction & Finishes: Design OLV-8 and OLV-12 housings are constructed of durable die-cast aluminum alloy. (thomasnet.com)
Radiators, water pumps, impellers and housings of aluminum have become increasingly common. (justia.com)

Low deformation, improve the quality of aluminum foil. (aluminiumceramicfiber.com)

Also referred to as dissimilar-metal corrosion, this process can occur as exfoliation or as intergranular corrosion. (wikipedia.org)
Spectral metal reflector system is constructed of stacked internal louvers that provide symmetrical lighting distribution pattern. (thomasnet.com)
An integral spectral metal computer-enhanced reflector system is constructed of stacked internal louvers that provide a symmetrical lighting distribution pattern with an effective projection area. (thomasnet.com)
1. Hanway metal products Co.,Ltd. is a leading aluminium pressure die casting process enterprise which has superiority in innovation. (hanway.com.cn)
The casting tip part and the gasket together form a cavity, so that the metal can flow through the casting tip just before the plate solidifies. (alalloycasting.com)
They include babbitt metal, bronze, and aluminum-tin. (machinedesign.com)
Clean metal can produce higher quality castings, less scrap and fewer inclusion defects, all of which help increase profits. (aluminum-casting-filter.com)

The resulting high-quality castings require minimal post-casting machining, reducing manufacturing time and costs. (zhycasting.com)
Investment casting has revolutionized manufacturing for aerospace applications by enabling the production of lightweight, high-quality, and complex components. (zhycasting.com)
To build a high-quality wheel, the first thing to do is aluminum. (metal-forging.com)
The casting tip is designed for the production of high quality continuously cast aluminum sheets. (aluminiumceramicfiber.com)

Its ability to achieve precise geometries, optimize designs, reduce weight, and deliver reliable performance has made investment casting an indispensable process in the aerospace industry, contributing to advancements in aircraft performance, efficiency, and safety. (zhycasting.com)
The end caps are generally made of cast iron or cast aluminum and incorporate threaded entries for ports. (roymech.co.uk)
Sometimes special dynamic seals are used to provide a bearing surface or the piston may be made of brass or surfaced with brass (or bronze) which is then honed to a finish, similar to that of the tube bore. (roymech.co.uk)
Because of the excellent drawing and spinning properties of tin, wrought parts are usually made from pewter that is first cast into slabs, then rolled into sheet. (machinedesign.com)
Casting, as the name suggests, is made of aluminum alloy melted into liquid and cast into molds. (metal-forging.com)
Internal designs can be made to customer specifications. (aluminiumceramicfiber.com)
The surface treatment of the lamp body is made of aluminum alloy die-casting and electrostatic spraying. (mflighting.com)
The housing is made of premium-grade aluminum. (ecmag.com)
Hubbell's SERS series recessed exit sign is made of high-strength cast aluminum. (ecmag.com)

The drawing specifies 7075 aluminum, which is a high-strength aircraft-grade aluminum alloy that is both extremely strong, and relatively light weight. (jcna.com)

The ruggedized keypad's housing can be mounted to a variety of surfaces. (cepro-iq.com)
Biofilms may form on a wide variety of surfaces, isms (based on cell morphology). (cdc.gov)

Through forging, defects such as as-cast looseness produced in the smelting process of aluminum can be eliminated, and the microstructure can be optimized. (metal-forging.com)

These processes are known as secondary operations or post-cast operations. (gabrian.com)
Why Do Some Die-Cast Parts Require Secondary Operations? (gabrian.com)
To prepare custom forged aluminum parts for secondary machining and assembly, Pintejin' plants have in-house heat treating capabilities. (metal-forging.com)

Impregnation uses a vacuum and a specially-formulated organic resin to remove the air from any open pores (voids) on the part's surface and then fill and seal the pores. (gabrian.com)
Specifically, a uniform PEO coating with small pore sizes (5.2-5.3 µm) led to the creation of plate-like HA particles, while a random-like HA structure formed on nonuniform surfaces with large pores (7.0-11.1 µm) of PEO. (bvsalud.org)

Brackets to keep all of the stock componenets in their existing locations (shift quadrant, ignition module and oil filter bracket) are available and sold separately.EMI Thunder Exhaust Manifolds are constructed from the highest strength 356 aluminum that is heat treated to a T-6 condition after it is cast. (diamondperformanceparts.com)
Mounting hardware includes SoundTube's proprietary tool-free, low profile Stealth™ bracket with an integrated internal wedge cam, which allows for stable and precise aiming from 0 to 90 degrees. (avprosupply.com)

Internal elevation mechanisms are enclosed to provide precise pitch control of the light beam all while staying protected. (thegpsstore.com)
Die-casting is a precise process, so die-cast products generally don't need special machining to meet dimensional tolerances. (gabrian.com)

The piston not only transmits force to the rod, but must also include a bearing surface to maintain its position and stability and a dynamic seal to ensure positive separation between the high and low-pressure sides. (roymech.co.uk)
Daiwa BG is equipped with a machined aluminum body and body cover providing strength and internal part stability. (mainesport.com)

However, they are not as common for die-cast products which tend to have very smooth surfaces already. (gabrian.com)

These various deposits when created, coat the surfaces of cooling system components or clog their cooling passages, particularly in radiators. (justia.com)

Can protect the surface of foil. (aluminiumceramicfiber.com)

citation needed] Aluminium alloy compositions are registered with The Aluminum Association. (wikipedia.org)

For example, some applications may require surface characteristics that aluminum alone cannot provide or a surface other than the smooth one provided by die casting. (gabrian.com)
But they are sometimes unavoidable, especially if you want to obtain unique characteristics that aluminum die-casting alone cannot provide. (gabrian.com)
This is because ultrafine powder alumina has an array of superior electrical, optical, magnetic, mechanical, and chemical macroscopic characteristics compared to traditional particles. (actionext.com)
The cast aluminum end boxes have been optimized using CAD design and CFD simulations to achieve excellent cooling characteristics with minimal back pressure. (wagner-tuningshop.de)
Attachment is a complex pro- cess regulated by diverse characteristics of the growth medium, substratum, and cell surface. (cdc.gov)

Chemicals and Drugs1

Analytical, Diagnostic and Therapeutic Techniques and Equipment4

Phenomena and Processes1

Technology, Industry, Agriculture1

Alloys16

Anti-corrosion4

Ensure the purity of the aluminum2

Resistant7

Molten aluminum8

Porosity1

Hardness5

Wear resistance2

Galvanic1

Oxidation3

Temperature7

Moisture3

Mechanical Properties5

Stainless steel3

Continuous9

Ceramic9

Metals1

Caster Tip1

Suitable2

Exceptional dimensional accuracy1

Materials5

Prevent2

Treatments2

Combustion engines3

Intricate2

Significantly1

Features5

Titanium4

Good5

Environments4

60611

Zinc2

Degradation2

Powder-coat1

Thermal conductivity1

Durability1

Extrusions1

Material6

Lens2

Outer1

Steel3

Housings2

Deformation1

Metal7

High-quality4

Made9

70751

Variety of surfaces2

Defects1

Secondary3

Pores2

Bracket2

Precise2

Stability2

Smooth surfaces1

Coat1

Foil1

Compositions1

Characteristics5