Food Inspection: Examination of foods to assure wholesome and clean products free from unsafe microbes or chemical contamination, natural or added deleterious substances, and decomposition during production, processing, packaging, etc.Facility Regulation and Control: Formal voluntary or governmental procedures and standards required of hospitals and health or other facilities to improve operating efficiency, and for the protection of the consumer.AxisAcetic Acid: Product of the oxidation of ethanol and of the destructive distillation of wood. It is used locally, occasionally internally, as a counterirritant and also as a reagent. (Stedman, 26th ed)Pest Control: The reduction or regulation of the population of noxious, destructive, or dangerous plants, insects, or other animals. This includes control of plants that serve as habitats or food sources for animal pests.Hypothalamo-Hypophyseal System: A collection of NEURONS, tracts of NERVE FIBERS, endocrine tissue, and blood vessels in the HYPOTHALAMUS and the PITUITARY GLAND. This hypothalamo-hypophyseal portal circulation provides the mechanism for hypothalamic neuroendocrine (HYPOTHALAMIC HORMONES) regulation of pituitary function and the release of various PITUITARY HORMONES into the systemic circulation to maintain HOMEOSTASIS.Food Safety: Activities involved in ensuring the safety of FOOD including avoidance of bacterial and other contamination.Abattoirs: Places where animals are slaughtered and dressed for market.Pituitary-Adrenal System: The interactions between the anterior pituitary and adrenal glands, in which corticotropin (ACTH) stimulates the adrenal cortex and adrenal cortical hormones suppress the production of corticotropin by the anterior pituitary.Swimming PoolsShips: Large vessels propelled by power or sail used for transportation on rivers, seas, oceans, or other navigable waters. Boats are smaller vessels propelled by oars, paddles, sail, or power; they may or may not have a deck.Food Contamination: The presence in food of harmful, unpalatable, or otherwise objectionable foreign substances, e.g. chemicals, microorganisms or diluents, before, during, or after processing or storage.Colposcopy: The examination, therapy or surgery of the cervix and vagina by means of a specially designed endoscope introduced vaginally.Anniversaries and Special Events: Occasions to commemorate an event or occasions designated for a specific purpose.Sanitation: The development and establishment of environmental conditions favorable to the health of the public.Taenia saginata: Species of tapeworm in the genus TAENIA, that infects cattle. It is acquired by humans through the ingestion of raw or insufficiently cooked beef.RestaurantsHousekeeping: The care and management of property.Sensitivity and Specificity: Binary classification measures to assess test results. Sensitivity or recall rate is the proportion of true positives. Specificity is the probability of correctly determining the absence of a condition. (From Last, Dictionary of Epidemiology, 2d ed)Algorithms: A procedure consisting of a sequence of algebraic formulas and/or logical steps to calculate or determine a given task.Molecular Sequence Data: Descriptions of specific amino acid, carbohydrate, or nucleotide sequences which have appeared in the published literature and/or are deposited in and maintained by databanks such as GENBANK, European Molecular Biology Laboratory (EMBL), National Biomedical Research Foundation (NBRF), or other sequence repositories.Foodborne Diseases: Acute illnesses, usually affecting the GASTROINTESTINAL TRACT, brought on by consuming contaminated food or beverages. Most of these diseases are infectious, caused by a variety of bacteria, viruses, or parasites that can be foodborne. Sometimes the diseases are caused by harmful toxins from the microbes or other chemicals present in the food. Especially in the latter case, the condition is often called food poisoning.Hygiene: The science dealing with the establishment and maintenance of health in the individual and the group. It includes the conditions and practices conducive to health. (Webster, 3d ed)Food Handling: Any aspect of the operations in the preparation, processing, transport, storage, packaging, wrapping, exposure for sale, service, or delivery of food.Meat: The edible portions of any animal used for food including domestic mammals (the major ones being cattle, swine, and sheep) along with poultry, fish, shellfish, and game.Reproducibility of Results: The statistical reproducibility of measurements (often in a clinical context), including the testing of instrumentation or techniques to obtain reproducible results. The concept includes reproducibility of physiological measurements, which may be used to develop rules to assess probability or prognosis, or response to a stimulus; reproducibility of occurrence of a condition; and reproducibility of experimental results.Atrial Fibrillation: Abnormal cardiac rhythm that is characterized by rapid, uncoordinated firing of electrical impulses in the upper chambers of the heart (HEART ATRIA). In such case, blood cannot be effectively pumped into the lower chambers of the heart (HEART VENTRICLES). It is caused by abnormal impulse generation.Body Patterning: The processes occurring in early development that direct morphogenesis. They specify the body plan ensuring that cells will proceed to differentiate, grow, and diversify in size and shape at the correct relative positions. Included are axial patterning, segmentation, compartment specification, limb position, organ boundary patterning, blood vessel patterning, etc.Industry: Any enterprise centered on the processing, assembly, production, or marketing of a line of products, services, commodities, or merchandise, in a particular field often named after its principal product. Examples include the automobile, fishing, music, publishing, insurance, and textile industries.Uterine Cervical Neoplasms: Tumors or cancer of the UTERINE CERVIX.Legislation, Food: Laws and regulations concerned with industrial processing and marketing of foods.Carcinogenicity Tests: Tests to experimentally measure the tumor-producing/cancer cell-producing potency of an agent by administering the agent (e.g., benzanthracenes) and observing the quantity of tumors or the cell transformation developed over a given period of time. The carcinogenicity value is usually measured as milligrams of agent administered per tumor developed. Though this test differs from the DNA-repair and bacterial microsome MUTAGENICITY TESTS, researchers often attempt to correlate the finding of carcinogenicity values and mutagenicity values.Quality Control: A system for verifying and maintaining a desired level of quality in a product or process by careful planning, use of proper equipment, continued inspection, and corrective action as required. (Random House Unabridged Dictionary, 2d ed)Observer Variation: The failure by the observer to measure or identify a phenomenon accurately, which results in an error. Sources for this may be due to the observer's missing an abnormality, or to faulty technique resulting in incorrect test measurement, or to misinterpretation of the data. Two varieties are inter-observer variation (the amount observers vary from one another when reporting on the same material) and intra-observer variation (the amount one observer varies between observations when reporting more than once on the same material).Time Factors: Elements of limited time intervals, contributing to particular results or situations.Cysticercosis: Infection with CYSTICERCUS, the larval form of the various tapeworms of the genus Taenia (usually T. solium in man). In humans they penetrate the intestinal wall and invade subcutaneous tissue, brain, eye, muscle, heart, liver, lung, and peritoneum. Brain involvement results in NEUROCYSTICERCOSIS.Amino Acid Sequence: The order of amino acids as they occur in a polypeptide chain. This is referred to as the primary structure of proteins. It is of fundamental importance in determining PROTEIN CONFORMATION.Liquid Crystals: Materials in intermediate state between solid and liquid.Software: Sequential operating programs and data which instruct the functioning of a digital computer.Physical Examination: Systematic and thorough inspection of the patient for physical signs of disease or abnormality.Base Sequence: The sequence of PURINES and PYRIMIDINES in nucleic acids and polynucleotides. It is also called nucleotide sequence.Food Microbiology: The presence of bacteria, viruses, and fungi in food and food products. This term is not restricted to pathogenic organisms: the presence of various non-pathogenic bacteria and fungi in cheeses and wines, for example, is included in this concept.Air Conditioning: The maintenance of certain aspects of the environment within a defined space to facilitate the function of that space; aspects controlled include air temperature and motion, radiant heat level, moisture, and concentration of pollutants such as dust, microorganisms, and gases. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)Drug and Narcotic Control: Control of drug and narcotic use by international agreement, or by institutional systems for handling prescribed drugs. This includes regulations concerned with the manufacturing, dispensing, approval (DRUG APPROVAL), and marketing of drugs.Pediculus: Lice of the genus Pediculus, family Pediculidae. Pediculus humanus corporus is the human body louse and Pediculus humanus capitis is the human head louse.Maps as Topic: Representations, normally to scale and on a flat medium, of a selection of material or abstract features on the surface of the earth, the heavens, or celestial bodies.Manufactured Materials: Substances and materials manufactured for use in various technologies and industries and for domestic use.Image Processing, Computer-Assisted: A technique of inputting two-dimensional images into a computer and then enhancing or analyzing the imagery into a form that is more useful to the human observer.Early Detection of Cancer: Methods to identify and characterize cancer in the early stages of disease and predict tumor behavior.GreeceAutomation, Laboratory: Controlled operations of analytic or diagnostic processes, or systems by mechanical or electronic devices.Cervical Intraepithelial Neoplasia: A malignancy arising in uterine cervical epithelium and confined thereto, representing a continuum of histological changes ranging from well-differentiated CIN 1 (formerly, mild dysplasia) to severe dysplasia/carcinoma in situ, CIN 3. The lesion arises at the squamocolumnar cell junction at the transformation zone of the endocervical canal, with a variable tendency to develop invasive epidermoid carcinoma, a tendency that is enhanced by concomitant human papillomaviral infection. (Segen, Dictionary of Modern Medicine, 1992)Housing: Living facilities for humans.Models, Molecular: Models used experimentally or theoretically to study molecular shape, electronic properties, or interactions; includes analogous molecules, computer-generated graphics, and mechanical structures.Cryotherapy: A form of therapy consisting in the local or general use of cold. The selective destruction of tissue by extreme cold or freezing is CRYOSURGERY. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)Drug Storage: The process of keeping pharmaceutical products in an appropriate location.Disease Outbreaks: Sudden increase in the incidence of a disease. The concept includes EPIDEMICS and PANDEMICS.School Nursing: A nursing specialty concerned with health and nursing care given to primary and secondary school students by a registered nurse.Iodides: Inorganic binary compounds of iodine or the I- ion.Athletes: Individuals who have developed skills, physical stamina and strength or participants in SPORTS or other physical activities.Records as Topic: The commitment in writing, as authentic evidence, of something having legal importance. The concept includes certificates of birth, death, etc., as well as hospital, medical, and other institutional records.Mass Screening: Organized periodic procedures performed on large groups of people for the purpose of detecting disease.Animal Care Committees: Institutional committees established to protect the welfare of animals used in research and education. The 1971 NIH Guide for the Care and Use of Laboratory Animals introduced the policy that institutions using warm-blooded animals in projects supported by NIH grants either be accredited by a recognized professional laboratory animal accrediting body or establish its own committee to evaluate animal care; the Public Health Service adopted a policy in 1979 requiring such committees; and the 1985 amendments to the Animal Welfare Act mandate review and approval of federally funded research with animals by a formally designated Institutional Animal Care and Use Committee (IACUC).Nuclear Medicine Department, Hospital: Hospital department responsible for the administration and management of nuclear medicine services.Radioactive Waste: Liquid, solid, or gaseous waste resulting from mining of radioactive ore, production of reactor fuel materials, reactor operation, processing of irradiated reactor fuels, and related operations, and from use of radioactive materials in research, industry, and medicine. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)Bacteriophage T7: Virulent bacteriophage and type species of the genus T7-like phages, in the family PODOVIRIDAE, that infects E. coli. It consists of linear double-stranded DNA, terminally redundant, and non-permuted.Palpation: Application of fingers with light pressure to the surface of the body to determine consistence of parts beneath in physical diagnosis; includes palpation for determining the outlines of organs.Coloring Agents: Chemicals and substances that impart color including soluble dyes and insoluble pigments. They are used in INKS; PAINTS; and as INDICATORS AND REAGENTS.Food Preservation: Procedures or techniques used to keep food from spoiling.Animal Welfare: The protection of animals in laboratories or other specific environments by promoting their health through better nutrition, housing, and care.Radiography, Dental: Radiographic techniques used in dentistry.Ribosome Subunits: The two dissimilar sized ribonucleoprotein complexes that comprise a RIBOSOME - the large ribosomal subunit and the small ribosomal subunit. The eukaryotic 80S ribosome is composed of a 60S large subunit and a 40S small subunit. The bacterial 70S ribosome is composed of a 50S large subunit and a 30S small subunit.Scalp DermatosesCysticercus: The larval form of various tapeworms of the genus Taenia.Models, Biological: Theoretical representations that simulate the behavior or activity of biological processes or diseases. For disease models in living animals, DISEASE MODELS, ANIMAL is available. Biological models include the use of mathematical equations, computers, and other electronic equipment.Drug Incompatibility: The quality of not being miscible with another given substance without a chemical change. One drug is not of suitable composition to be combined or mixed with another agent or substance. The incompatibility usually results in an undesirable reaction, including chemical alteration or destruction. (Dorland, 27th ed; Stedman, 25th ed)Imaging, Three-Dimensional: The process of generating three-dimensional images by electronic, photographic, or other methods. For example, three-dimensional images can be generated by assembling multiple tomographic images with the aid of a computer, while photographic 3-D images (HOLOGRAPHY) can be made by exposing film to the interference pattern created when two laser light sources shine on an object.Optical Devices: Products or parts of products used to detect, manipulate, or analyze light, such as LENSES, refractors, mirrors, filters, prisms, and OPTICAL FIBERS.Papanicolaou Test: Cytological preparation of cells collected from a mucosal surface and stained with Papanicolaou stain.Drugs, Investigational: Drugs which have received FDA approval for human testing but have yet to be approved for commercial marketing. This includes drugs used for treatment while they still are undergoing clinical trials (Treatment IND). The main heading includes drugs under investigation in foreign countries.Hydrocortisone: The main glucocorticoid secreted by the ADRENAL CORTEX. Its synthetic counterpart is used, either as an injection or topically, in the treatment of inflammation, allergy, collagen diseases, asthma, adrenocortical deficiency, shock, and some neoplastic conditions.Drug Residues: Drugs and their metabolites which are found in the edible tissues and milk of animals after their medication with specific drugs. This term can also apply to drugs found in adipose tissue of humans after drug treatment.Computer Simulation: Computer-based representation of physical systems and phenomena such as chemical processes.Dental Caries: Localized destruction of the tooth surface initiated by decalcification of the enamel followed by enzymatic lysis of organic structures and leading to cavity formation. If left unchecked, the cavity may penetrate the enamel and dentin and reach the pulp.Transistors, Electronic: Electrical devices that are composed of semiconductor material, with at least three connections to an external electronic circuit. They are used to amplify electrical signals, detect signals, or as switches.Magnetic Resonance Imaging: Non-invasive method of demonstrating internal anatomy based on the principle that atomic nuclei in a strong magnetic field absorb pulses of radiofrequency energy and emit them as radiowaves which can be reconstructed into computerized images. The concept includes proton spin tomographic techniques.Public Health: Branch of medicine concerned with the prevention and control of disease and disability, and the promotion of physical and mental health of the population on the international, national, state, or municipal level.Brain: The part of CENTRAL NERVOUS SYSTEM that is contained within the skull (CRANIUM). Arising from the NEURAL TUBE, the embryonic brain is comprised of three major parts including PROSENCEPHALON (the forebrain); MESENCEPHALON (the midbrain); and RHOMBENCEPHALON (the hindbrain). The developed brain consists of CEREBRUM; CEREBELLUM; and other structures in the BRAIN STEM.Signal Transduction: The intracellular transfer of information (biological activation/inhibition) through a signal pathway. In each signal transduction system, an activation/inhibition signal from a biologically active molecule (hormone, neurotransmitter) is mediated via the coupling of a receptor/enzyme to a second messenger system or to an ion channel. Signal transduction plays an important role in activating cellular functions, cell differentiation, and cell proliferation. Examples of signal transduction systems are the GAMMA-AMINOBUTYRIC ACID-postsynaptic receptor-calcium ion channel system, the receptor-mediated T-cell activation pathway, and the receptor-mediated activation of phospholipases. Those coupled to membrane depolarization or intracellular release of calcium include the receptor-mediated activation of cytotoxic functions in granulocytes and the synaptic potentiation of protein kinase activation. Some signal transduction pathways may be part of larger signal transduction pathways; for example, protein kinase activation is part of the platelet activation signal pathway.Cattle: Domesticated bovine animals of the genus Bos, usually kept on a farm or ranch and used for the production of meat or dairy products or for heavy labor.Food-Processing Industry: The productive enterprises concerned with food processing.Cattle Diseases: Diseases of domestic cattle of the genus Bos. It includes diseases of cows, yaks, and zebus.Corticosterone: An adrenocortical steroid that has modest but significant activities as a mineralocorticoid and a glucocorticoid. (From Goodman and Gilman's The Pharmacological Basis of Therapeutics, 8th ed, p1437)Protein Conformation: The characteristic 3-dimensional shape of a protein, including the secondary, supersecondary (motifs), tertiary (domains) and quaternary structure of the peptide chain. PROTEIN STRUCTURE, QUATERNARY describes the conformation assumed by multimeric proteins (aggregates of more than one polypeptide chain).Corticotropin-Releasing Hormone: A peptide of about 41 amino acids that stimulates the release of ADRENOCORTICOTROPIC HORMONE. CRH is synthesized by neurons in the PARAVENTRICULAR NUCLEUS of the HYPOTHALAMUS. After being released into the pituitary portal circulation, CRH stimulates the release of ACTH from the PITUITARY GLAND. CRH can also be synthesized in other tissues, such as PLACENTA; ADRENAL MEDULLA; and TESTIS.Dental Caries Activity Tests: Diagnostic tests conducted in order to measure the increment of active DENTAL CARIES over a period of time.Biostatistics: The application of STATISTICS to biological systems and organisms involving the retrieval or collection, analysis, reduction, and interpretation of qualitative and quantitative data.Pattern Recognition, Automated: In INFORMATION RETRIEVAL, machine-sensing or identification of visible patterns (shapes, forms, and configurations). (Harrod's Librarians' Glossary, 7th ed)Hand Disinfection: The act of cleansing the hands with water or other liquid, with or without the inclusion of soap or other detergent, for the purpose of destroying infectious microorganisms.Mutation: Any detectable and heritable change in the genetic material that causes a change in the GENOTYPE and which is transmitted to daughter cells and to succeeding generations.Nuclear Medicine: A specialty field of radiology concerned with diagnostic, therapeutic, and investigative use of radioactive compounds in a pharmaceutical form.Soaps: Sodium or potassium salts of long chain fatty acids. These detergent substances are obtained by boiling natural oils or fats with caustic alkali. Sodium soaps are harder and are used as topical anti-infectives and vehicles in pills and liniments; potassium soaps are soft, used as vehicles for ointments and also as topical antimicrobials.Drug Industry: That segment of commercial enterprise devoted to the design, development, and manufacture of chemical products for use in the diagnosis and treatment of disease, disability, or other dysfunction, or to improve function.Sterilization: The destroying of all forms of life, especially microorganisms, by heat, chemical, or other means.Safety: Freedom from exposure to danger and protection from the occurrence or risk of injury or loss. It suggests optimal precautions in the workplace, on the street, in the home, etc., and includes personal safety as well as the safety of property.United States Department of Agriculture: A cabinet department in the Executive Branch of the United States Government concerned with improving and maintaining farm income and developing and expanding markets for agricultural products. Through inspection and grading services it safeguards and insures standards of quality in food supply and production.Sequence Alignment: The arrangement of two or more amino acid or base sequences from an organism or organisms in such a way as to align areas of the sequences sharing common properties. The degree of relatedness or homology between the sequences is predicted computationally or statistically based on weights assigned to the elements aligned between the sequences. This in turn can serve as a potential indicator of the genetic relatedness between the organisms.Hemoperitoneum: Accumulations of blood in the PERITONEAL CAVITY due to internal HEMORRHAGE.Accidents, Occupational: Unforeseen occurrences, especially injuries in the course of work-related activities.Microbiological Techniques: Techniques used in microbiology.Image Interpretation, Computer-Assisted: Methods developed to aid in the interpretation of ultrasound, radiographic images, etc., for diagnosis of disease.Gene Expression Regulation, Developmental: Any of the processes by which nuclear, cytoplasmic, or intercellular factors influence the differential control of gene action during the developmental stages of an organism.Computer Graphics: The process of pictorial communication, between human and computers, in which the computer input and output have the form of charts, drawings, or other appropriate pictorial representation.Environmental Health: The science of controlling or modifying those conditions, influences, or forces surrounding man which relate to promoting, establishing, and maintaining health.Complement C5 Convertase, Alternative Pathway: A serine protease that cleaves multiple COMPLEMENT C5 into COMPLEMENT C5A (anaphylatoxin) and COMPLEMENT C5B in the ALTERNATIVE COMPLEMENT ACTIVATION PATHWAY. It is the complex of ALTERNATIVE PATHWAY C3 CONVERTASE (C3bBb) with an additional COMPLEMENT C3B, or C3bBb3b.Equipment Failure Analysis: The evaluation of incidents involving the loss of function of a device. These evaluations are used for a variety of purposes such as to determine the failure rates, the causes of failures, costs of failures, and the reliability and maintainability of devices.Occupational Health: The promotion and maintenance of physical and mental health in the work environment.Binding Sites: The parts of a macromolecule that directly participate in its specific combination with another molecule.Animals, LaboratoryTooth, Deciduous: The teeth of the first dentition, which are shed and replaced by the permanent teeth.Meat Products: Articles of food which are derived by a process of manufacture from any portion of carcasses of any animal used for food (e.g., head cheese, sausage, scrapple).Drug Packaging: Containers, packaging, and packaging materials for drugs and BIOLOGICAL PRODUCTS. These include those in ampule, capsule, tablet, solution or other forms. Packaging includes immediate-containers, secondary-containers, and cartons. In the United States, such packaging is controlled under the Federal Food, Drug, and Cosmetic Act which also stipulates requirements for tamper-resistance and child-resistance. Similar laws govern use elsewhere. (From Code of Federal Regulations, 21 CFR 1 Section 210, 1993) DRUG LABELING is also available.Equipment Design: Methods of creating machines and devices.Radiography, Dental, Digital: A rapid, low-dose, digital imaging system using a small intraoral sensor instead of radiographic film, an intensifying screen, and a charge-coupled device. It presents the possibility of reduced patient exposure and minimal distortion, although resolution and latitude are inferior to standard dental radiography. A receiver is placed in the mouth, routing signals to a computer which images the signals on a screen or in print. It includes digitizing from x-ray film or any other detector. (From MEDLINE abstracts; personal communication from Dr. Charles Berthold, NIDR)Government Agencies: Administrative units of government responsible for policy making and management of governmental activities.Tomography, X-Ray Computed: Tomography using x-ray transmission and a computer algorithm to reconstruct the image.Crystallography, X-Ray: The study of crystal structure using X-RAY DIFFRACTION techniques. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)Environmental Monitoring: The monitoring of the level of toxins, chemical pollutants, microbial contaminants, or other harmful substances in the environment (soil, air, and water), workplace, or in the bodies of people and animals present in that environment.Microscopy: The use of instrumentation and techniques for visualizing material and details that cannot be seen by the unaided eye. It is usually done by enlarging images, transmitted by light or electron beams, with optical or magnetic lenses that magnify the entire image field. With scanning microscopy, images are generated by collecting output from the specimen in a point-by-point fashion, on a magnified scale, as it is scanned by a narrow beam of light or electrons, a laser, a conductive probe, or a topographical probe.Salmonella Food Poisoning: Poisoning caused by ingestion of food harboring species of SALMONELLA. Conditions of raising, shipping, slaughtering, and marketing of domestic animals contribute to the spread of this bacterium in the food supply.Escherichia coli: A species of gram-negative, facultatively anaerobic, rod-shaped bacteria (GRAM-NEGATIVE FACULTATIVELY ANAEROBIC RODS) commonly found in the lower part of the intestine of warm-blooded animals. It is usually nonpathogenic, but some strains are known to produce DIARRHEA and pyogenic infections. Pathogenic strains (virotypes) are classified by their specific pathogenic mechanisms such as toxins (ENTEROTOXIGENIC ESCHERICHIA COLI), etc.Thermography: Imaging the temperatures in a material, or in the body or an organ. Imaging is based on self-emanating infrared radiation (HEAT WAVES), or on changes in properties of the material or tissue that vary with temperature, such as ELASTICITY; MAGNETIC FIELD; or LUMINESCENCE.Government Regulation: Exercise of governmental authority to control conduct.Proteins: Linear POLYPEPTIDES that are synthesized on RIBOSOMES and may be further modified, crosslinked, cleaved, or assembled into complex proteins with several subunits. The specific sequence of AMINO ACIDS determines the shape the polypeptide will take, during PROTEIN FOLDING, and the function of the protein.Asphyxia Neonatorum: Respiratory failure in the newborn. (Dorland, 27th ed)Shellfish: Aquatic invertebrates belonging to the phylum MOLLUSCA or the subphylum CRUSTACEA, and used as food.Sheep Diseases: Diseases of domestic and mountain sheep of the genus Ovis.Inservice Training: On the job training programs for personnel carried out within an institution or agency. It includes orientation programs.Poultry: Domesticated birds raised for food. It typically includes CHICKENS; TURKEYS, DUCKS; GEESE; and others.Electrosurgery: Division of tissues by a high-frequency current applied locally with a metal instrument or needle. (Stedman, 25th ed)Embryo, Nonmammalian: The developmental entity of a fertilized egg (ZYGOTE) in animal species other than MAMMALS. For chickens, use CHICK EMBRYO.Artifacts: Any visible result of a procedure which is caused by the procedure itself and not by the entity being analyzed. Common examples include histological structures introduced by tissue processing, radiographic images of structures that are not naturally present in living tissue, and products of chemical reactions that occur during analysis.Predictive Value of Tests: In screening and diagnostic tests, the probability that a person with a positive test is a true positive (i.e., has the disease), is referred to as the predictive value of a positive test; whereas, the predictive value of a negative test is the probability that the person with a negative test does not have the disease. Predictive value is related to the sensitivity and specificity of the test.RNA, Messenger: RNA sequences that serve as templates for protein synthesis. Bacterial mRNAs are generally primary transcripts in that they do not require post-transcriptional processing. Eukaryotic mRNA is synthesized in the nucleus and must be exported to the cytoplasm for translation. Most eukaryotic mRNAs have a sequence of polyadenylic acid at the 3' end, referred to as the poly(A) tail. The function of this tail is not known for certain, but it may play a role in the export of mature mRNA from the nucleus as well as in helping stabilize some mRNA molecules by retarding their degradation in the cytoplasm.Sequence Analysis, DNA: A multistage process that includes cloning, physical mapping, subcloning, determination of the DNA SEQUENCE, and information analysis.Indicators and Reagents: Substances used for the detection, identification, analysis, etc. of chemical, biological, or pathologic processes or conditions. Indicators are substances that change in physical appearance, e.g., color, at or approaching the endpoint of a chemical titration, e.g., on the passage between acidity and alkalinity. Reagents are substances used for the detection or determination of another substance by chemical or microscopical means, especially analysis. Types of reagents are precipitants, solvents, oxidizers, reducers, fluxes, and colorimetric reagents. (From Grant & Hackh's Chemical Dictionary, 5th ed, p301, p499)Computational Biology: A field of biology concerned with the development of techniques for the collection and manipulation of biological data, and the use of such data to make biological discoveries or predictions. This field encompasses all computational methods and theories for solving biological problems including manipulation of models and datasets.Swine: Any of various animals that constitute the family Suidae and comprise stout-bodied, short-legged omnivorous mammals with thick skin, usually covered with coarse bristles, a rather long mobile snout, and small tail. Included are the genera Babyrousa, Phacochoerus (wart hogs), and Sus, the latter containing the domestic pig (see SUS SCROFA).Feasibility Studies: Studies to determine the advantages or disadvantages, practicability, or capability of accomplishing a projected plan, study, or project.Rotation: Motion of an object in which either one or more points on a line are fixed. It is also the motion of a particle about a fixed point. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)Cluster Analysis: A set of statistical methods used to group variables or observations into strongly inter-related subgroups. In epidemiology, it may be used to analyze a closely grouped series of events or cases of disease or other health-related phenomenon with well-defined distribution patterns in relation to time or place or both.Visual Perception: The selecting and organizing of visual stimuli based on the individual's past experience.Phylogeny: The relationships of groups of organisms as reflected by their genetic makeup.ROC Curve: A graphic means for assessing the ability of a screening test to discriminate between healthy and diseased persons; may also be used in other studies, e.g., distinguishing stimuli responses as to a faint stimuli or nonstimuli.Analysis of Variance: A statistical technique that isolates and assesses the contributions of categorical independent variables to variation in the mean of a continuous dependent variable.Color: The visually perceived property of objects created by absorption or reflection of specific wavelengths of light.Accreditation: Certification as complying with a standard set by non-governmental organizations, applied for by institutions, programs, and facilities on a voluntary basis.Water Supply: Means or process of supplying water (as for a community) usually including reservoirs, tunnels, and pipelines and often the watershed from which the water is ultimately drawn. (Webster, 3d ed)Automation: Controlled operation of an apparatus, process, or system by mechanical or electronic devices that take the place of human organs of observation, effort, and decision. (From Webster's Collegiate Dictionary, 1993)Human Engineering: The science of designing, building or equipping mechanical devices or artificial environments to the anthropometric, physiological, or psychological requirements of the people who will use them.Chemistry Techniques, Analytical: Methodologies used for the isolation, identification, detection, and quantitation of chemical substances.Tuberculosis, Bovine: An infection of cattle caused by MYCOBACTERIUM BOVIS. It is transmissible to man and other animals.Cadaver: A dead body, usually a human body.Lasers: An optical source that emits photons in a coherent beam. Light Amplification by Stimulated Emission of Radiation (LASER) is brought about using devices that transform light of varying frequencies into a single intense, nearly nondivergent beam of monochromatic radiation. Lasers operate in the infrared, visible, ultraviolet, or X-ray regions of the spectrum.Taenia solium: Species of tapeworm in the genus TAENIA, that infects swine. It is acquired by humans through the ingestion of cured or undercooked pork.Models, Theoretical: Theoretical representations that simulate the behavior or activity of systems, processes, or phenomena. They include the use of mathematical equations, computers, and other electronic equipment.Guideline Adherence: Conformity in fulfilling or following official, recognized, or institutional requirements, guidelines, recommendations, protocols, pathways, or other standards.Retrospective Studies: Studies used to test etiologic hypotheses in which inferences about an exposure to putative causal factors are derived from data relating to characteristics of persons under study or to events or experiences in their past. The essential feature is that some of the persons under study have the disease or outcome of interest and their characteristics are compared with those of unaffected persons.Swine Diseases: Diseases of domestic swine and of the wild boar of the genus Sus.Transcription Factors: Endogenous substances, usually proteins, which are effective in the initiation, stimulation, or termination of the genetic transcription process.Drug Contamination: The presence of organisms, or any foreign material that makes a drug preparation impure.Radiography: Examination of any part of the body for diagnostic purposes by means of X-RAYS or GAMMA RAYS, recording the image on a sensitized surface (such as photographic film).Eye Movements: Voluntary or reflex-controlled movements of the eye.Occupational Exposure: The exposure to potentially harmful chemical, physical, or biological agents that occurs as a result of one's occupation.Data Interpretation, Statistical: Application of statistical procedures to analyze specific observed or assumed facts from a particular study.Pituitary Gland: A small, unpaired gland situated in the SELLA TURCICA. It is connected to the HYPOTHALAMUS by a short stalk which is called the INFUNDIBULUM.EuropeProtein Binding: The process in which substances, either endogenous or exogenous, bind to proteins, peptides, enzymes, protein precursors, or allied compounds. Specific protein-binding measures are often used as assays in diagnostic assessments.Air Pollution, Indoor: The contamination of indoor air.Quality Assurance, Health Care: Activities and programs intended to assure or improve the quality of care in either a defined medical setting or a program. The concept includes the assessment or evaluation of the quality of care; identification of problems or shortcomings in the delivery of care; designing activities to overcome these deficiencies; and follow-up monitoring to ensure effectiveness of corrective steps.PaperPeritoneal Lavage: Washing out of the peritoneal cavity. The procedure is a diagnostic as well as a therapeutic technique following abdominal trauma or inflammation.Mycobacterium bovis: The bovine variety of the tubercle bacillus. It is called also Mycobacterium tuberculosis var. bovis.Dental Casting Technique: The process of producing a form or impression made of metal or plaster using a mold.Equipment and Supplies: Expendable and nonexpendable equipment, supplies, apparatus, and instruments that are used in diagnostic, surgical, therapeutic, scientific, and experimental procedures.Sequence Homology, Amino Acid: The degree of similarity between sequences of amino acids. This information is useful for the analyzing genetic relatedness of proteins and species.Lighting: The illumination of an environment and the arrangement of lights to achieve an effect or optimal visibility. Its application is in domestic or in public settings and in medical and non-medical environments.Movement: The act, process, or result of passing from one place or position to another. It differs from LOCOMOTION in that locomotion is restricted to the passing of the whole body from one place to another, while movement encompasses both locomotion but also a change of the position of the whole body or any of its parts. Movement may be used with reference to humans, vertebrate and invertebrate animals, and microorganisms. Differentiate also from MOTOR ACTIVITY, movement associated with behavior.Diagnosis, Computer-Assisted: Application of computer programs designed to assist the physician in solving a diagnostic problem.Image Enhancement: Improvement of the quality of a picture by various techniques, including computer processing, digital filtering, echocardiographic techniques, light and ultrastructural MICROSCOPY, fluorescence spectrometry and microscopy, scintigraphy, and in vitro image processing at the molecular level.Phenotype: The outward appearance of the individual. It is the product of interactions between genes, and between the GENOTYPE and the environment.Tongue: A muscular organ in the mouth that is covered with pink tissue called mucosa, tiny bumps called papillae, and thousands of taste buds. The tongue is anchored to the mouth and is vital for chewing, swallowing, and for speech.Bacterial Proteins: Proteins found in any species of bacterium.Laparotomy: Incision into the side of the abdomen between the ribs and pelvis.Polymerase Chain Reaction: In vitro method for producing large amounts of specific DNA or RNA fragments of defined length and sequence from small amounts of short oligonucleotide flanking sequences (primers). The essential steps include thermal denaturation of the double-stranded target molecules, annealing of the primers to their complementary sequences, and extension of the annealed primers by enzymatic synthesis with DNA polymerase. The reaction is efficient, specific, and extremely sensitive. Uses for the reaction include disease diagnosis, detection of difficult-to-isolate pathogens, mutation analysis, genetic testing, DNA sequencing, and analyzing evolutionary relationships.IndiaFluorescence: The property of emitting radiation while being irradiated. The radiation emitted is usually of longer wavelength than that incident or absorbed, e.g., a substance can be irradiated with invisible radiation and emit visible light. X-ray fluorescence is used in diagnosis.Adenomatous Polyps: Benign neoplasms derived from glandular epithelium. (From Stedman, 25th ed)Veterinary Medicine: The medical science concerned with the prevention, diagnosis, and treatment of diseases in animals.Sheep: Any of the ruminant mammals with curved horns in the genus Ovis, family Bovidae. They possess lachrymal grooves and interdigital glands, which are absent in GOATS.Cervix Uteri: The neck portion of the UTERUS between the lower isthmus and the VAGINA forming the cervical canal.
The number can then be determined by visual inspection. The numeral system was invented in the 1300s by French Cistercian monks ... This symbol is essentially an axis that divides the two-dimensional plane into four quadrants. Each of these four quadrants ...
Number of axes - two axes are required to reach any point in a plane; three axes are required to reach any point in space. To ... product inspection, and testing; all accomplished with high endurance, speed, and precision. They can help in material handling ... robot's axes 4 and 6) to line up. The second wrist axis then attempts to spin 180° in zero time to maintain the orientation of ... the speed of the end of the arm when all axes are moving. Acceleration - how quickly an axis can accelerate. Since this is a ...
This specific point is marked, and the respective point on the x-axis represents the suggested inspection interval. Furthermore ... There are numerous factors that must be considered to determine this inspection interval. The non-destructive inspection (NDI) ... The number of inspections of a structure is directly related to the probability of a detecting a crack in that structure. The ... For example, visual inspection is the least reliable method because the human eye can only resolve and identify cracks on the ...
Quality control inspections are done, repairs are made, and accessories - such as floor mats, GPS systems, satellite radios, ... The facility at SBMT was operated by the Axis Group. which filed bankruptcy in 2012. Plans by the New York City Economic ... "NYCEDC Signs Lease With Axis Group For 74-Acre Brooklyn Site". NYCEDC. Samar Khurshid. "Garodnick, Menchaca Set Council Hearing ...
... pistols were used during World War II by both Allied and Axis forces. After occupying Belgium in 1940, German ... Examples produced by FN in Belgium under German occupation bear German inspection and acceptance marks, or Waffenamts, such as ...
The horizontal axis represents the energy equation derivable from The first law of thermodynamics.[1][11] The vertical axis, ... Upon inspection it may be noticed that each of these points has been taken near 56% efficiency. Selecting a low efficiency (,60 ... It may be found interesting that the speed coefficient may be chosen to define the y-axis of Figure 1.1, while at the same time ... It may be found interesting that the specific speed coefficient may be used in place of speed to define the y-axis of Figure ...
Post print inspection is crucial and is usually performed with special 2D vision systems on the printer or separate 3D systems ... A snugger and vacuum holders are used to secure the X and Y axes of the board. Vacuum holders must be carefully used, as they ...
Steamboat Inspection Service. Each vessel's certificate stated how many lifeboats, fire axes, and similar items were supposed ... although they were referred for special boiler inspections. The inspections and fines assessed on these four vessels were just ... At Port Townsend, following a surprise inspection of the steamer Garland on February 6, 1904, these defects were found: No ... and no water in many of what firebuckets were on board Fewer fire axes than required by her certificate Life raft had no ...
During the Second World War he was a supporter of the Axis powers, particularly Nazi Germany. Abroad he is incorrectly thought ... of the Training Section of the General Staff's Artillery Inspection, of 2nd, 3rd Infantry divisions and Minister of War. ...
As always, the findings are based on the extent of visible fabric at the date of inspection. The Mansion House is situated on ... The house fronts onto the street, the east - west axis sitting parallel to the road with the principal, north elevation ...
The ambition of this piece would later be recalled by the British bootlegger Osymyso, whose "Intro-Inspection" emulates the pop ... "Transitive Axis", which contains a 59 minute 59 second work in 9 movements. Feeling that there was more territory to explore, ...
A CAD based inspection solution package for use with many types of inspection hardware, including manual and CNC CMMs, portable ... PowerMILL Robot Interface A software package for the programming of machining robots with up to 8 axes. FeatureCAM A feature- ... PowerMILL A CAM solution for the programming of tool paths for 2 to 5 axis CNC Milling (Computer Numerical Control). ...
Z-Axis Connector Co, Warminster, PA, USA. Retrieved 11 May 2017. "ZEBRA® W Series Matrix Connectors". Fuji Polymer Industries. ... the latter is used for repeated assembly or inspection. LCD and electroluminescent displays Board-to-board connections Chip-to- ...
... to inspection tour of front toward Rogatica to demonstrate that only the Communist forces were fighting against the Axis. The ... As a member of the SOE he was a member of the Operation Hydra mission in the Axis occupied Yugoslavia. His task was to ... He was taken on a tour of inspection by Mosa Pijade of the partisan organization in Zabljak, Montenegro, and on the evening of ... Moša Pijade took him on a tour of inspection of the organization of the communist forces in Žabljak. When they arrived at ...
A spare off-axis segment is also planned (six off-axis and one primary are used as a primary mirror). Mirror 1, cast in October ... Mirror 5, in glass inspection phase. Planned for casting on November 5, 2017 Mirror 6, in early construction phase. Mirror 7, ... As this was an off-axis segment, a wide array of new optical tests and laboratory infrastructure had to be developed to polish ... The challenge is that the outer six mirror segments will be off-axis, and although identical to each other, will not be ...
... it contains the worm axis. The composite action test (double flank) is a method of inspection in which the work gear is rolled ... It applies to spur gears, parallel axis or crossed axis helical gears, and worm gearing. The central plane of a worm gear is ... The crossing point is the point of intersection of bevel gear axes; also the apparent point of intersection of the axes in ... perpendicular to the gear axis and contains the common perpendicular of the gear and worm axes. In the usual case with axes at ...
Use props along the axis, arrange the sitters, think of triangular or rectangular compositions." In addition to using portrait ... but upon closer inspection, would be revealed as separate people. Shitou worked with 6x6 cameras (Yashika) and a DSRL for color ...
Charlottenburger Chausee was a part of the Ost-West-Achse (East-West Axis), which during the Nazi period became a triumphal ... but after Adolf Hitler returned from his inspection of Paris in 1940, a huge victory parade was held. ...
... "axis of evil", the pressure for full access to inspection - even in universities - could be construed as an attempt to pirate ... Brazil, IAEA Reach Inspection Agreement Arms Control Association. Retrieved on 2010-10-06. Tracking Nuclear Proliferation - ... The Brazilian government did not allow the inspection of the centrifugal cascade halls, arguing that this would reveal ... The enrichment laboratories are under the National Safeguards control and national inspections are carried out by the ...
This operation is performed on the headstock center to ensure that the center's axis is aligned with the spindle's axis. A ... or inspection) operations without any loss of accuracy. A part may be turned in a lathe, sent off for hardening and tempering ... is a tool that has been ground to a point to accurately position a workpiece on an axis. They usually have an included angle of ...
Remote visual inspection is the first non destructive testing. It provides a cost-efficient primary assessment. Essential ... Many units display the full vibration spectrum of three axes simultaneously, providing a snapshot of what is going on with a ... Most predictive inspections are performed while equipment is in service, thereby minimizing disruption of normal system ... Time-based maintenance is labor-intensive, ineffective in identifying problems that develop between scheduled inspections, and ...
... inspection reveals it to be non-abelian. This group is in fact the smallest non-abelian group, the dihedral group D3: The ... a group is abelian if and only if its Cayley table's values are symmetric along its diagonal axis. The cyclic group of order 3 ... above, and {1, −1} under ordinary multiplication, also above, are both examples of abelian groups, and inspection of the ...
Tools for Plant Inspection Magnetic Flux Leakage as applied to tank floor inspections MFL Frequently Asked Questions (FAQs) ... The axial component of the vector signal is measured by a sensor mounted orthogonal to the axis of the pipe, and the radial ... Technology For Natural Gas Pipeline Inspection Intro to Pipeline Inspection, including MFL A Comparison of the Magnetic Flux ... In-line-Inspection (ILI) tools are built to travel inside a pipeline and collect data as they go. The type of ILI we are ...
It is designed to be the axis of food distribution not only in Mexico City but for the entire country as well. Its volume means ... also helps with the regulation of the country's food supply to ensure adequacy and safety as it centrality eases the inspection ...
When the revealing layer is moved along the vertical axis, the magnified shapes move along the vertical axis at a faster speed ... M.C. Hutley; R.F. Stevens (1999-11-16). "Optical inspection of arrays and periodic structures using moire magnification". IEE ... The magnified shapes appear periodically along the vertical axis. The dimensions along the horizontal axis are not changed. If ... The size of optical shapes pm, magnified along the vertical axis is expressed by the following formula: p m = − p b ⋅ p r p b ...
Solomon, Robert E. (2002). Fire and Life Safety Inspection Manual. Jones & Bartlett Learning. p. 459. ISBN 978-0-87765-472-8. . ... The variation of Pauling electronegativity (y-axis) as one descends the main groups of the periodic table from the second to ...
AXIS Mexico (Est. 2010) and AXIS India (Headquarters, Est. 2004). AXIS USA offers the conveniences of a purpose-built 120,000 ... AXIS has completed 19 successful FDA inspections at our Hyderabad, India and Dilworth, MN sites for USFDA submission studies, ... US - FDA has recently completed its third inspection of AXIS Clinicals USA for dermatology studies site with no 483 ... About AXIS Clinicals AXIS Clinicals USA, a full-service Contract Research Organization (CRO), is joined by other global sites, ...
... while scanning CMMs may ultimately eliminate inspection systems for gears and cam lift. ... Faster inspection, better data from QC to R&D. Watts says the transition from 3-axis to 5-axis programming is not difficult, ... Five-axis CMM scanning has been a game-changer for QC at the Maryville plant in terms of speed, data quality, and inspection ... Case study: Kawasaki - Five-axis CMM inspection lets "good times roll" in QC department at small engine plant. Scanning probes ...
Find Complete Details about Cnc 3/4/5 Axis Mill Aluminium Engineering Anodized Machined Cnc Parts,Machined Cnc Parts,Aluminium ... Engineering Parts,Cnc 3/4/5 Axis Mill Aluminium from Machining Supplier or Manufacturer-Dongguan Beigain Hardware & Electronic ... Cnc 3/4/5 Axis Mill Aluminium Engineering Anodized Machined Cnc Parts , ... 3. 100% quality inspection before shipment: Defect rate less than 0.7%.. 4. 1.5 million monthly export volume:we are still ...
... provides motion in at least one axis relative to the arm for an inspection probe attached to the end effector. Cut-off switches ... control system to a separation of the end effector from the bridge and proximity of the bridge to a structure under inspection. ... An arm 4 extends from tube 2 and attaches to an inspection probe 14 using a probe attachment 18. A second-axis rotor 700 may ... A probe attachment 18 may provide for multi-axis rotation of the inspection probe 14 with respect to the arm 4 and thereby the ...
3-Axis USB Vibration/Acceleration Data Logger. ITEM #VB10 * USB Universal Memory Card Reader. ITEM #SDRD1 ...
Semi Automated X-Ray Inspection Systems II-68. Automated X-Ray Inspection Systems II-68. How to Improve Functionality of AXIs? ... SMT Inspection Equipment I-5. Optical Inspection Systems I-5. X-Ray Inspection Equipment I-6. Laser Inspection Systems I-6. SMT ... Inspection - Locating the Defects II-54. Visual/Manual Inspection II-55. Optical/Laser Inspection II-55. X-Ray Inspection II-55 ... Inspection Equipment by Product Segment - Optical Inspection. Equipment, X-Ray Inspection Equipment and Laser Inspection. ...
Multi-axis calibrator measures all six degrees of freedom in any orientation for linear axes. 27th September 2016 10:53 am 27th ... Renishaw has brought out the PH20 probe head, which offers head touches for touch-trigger measurement and fast five-axis ... Utilising technology developed for the Revo measurement system, the PH20 will improve inspection on a range of co-ordinate ... Machine probes for CNC machine tools allow automated tool setting, workpiece set-up, in-cycle gauging and part inspection. ...
Measurement & Inspection * Additive Additive Manufacturing & 3D Printing * Industries Aerospace Automotive Die/Mold Medical Oil ... Three-Axis Linear Calibration Linear displacement along an axis of a CNC machine can be calibrated using a system based on ... 3D accuracy refers to linear measurement of each axis and the relationship of the X, Y and Z axes to one another-that is, the ... Because three-axis linear calibration does not consider the 3D relationships between each of the axis, only 3D (volumetric) ...
Source a Large Selection of Axis Camera Products at 3 axis gimbal ,6 axis robot ,5 axis cnc machine from China Alibaba.com ... China Axis Camera, China Axis Camera Suppliers and Manufacturers Directory - ... photo body camera lh-x6c 2.4g 6 axis 4ch rc quadcopter drone with body camera usb inspection body camera from novestom Novestom ... Related Searches for axis camera: 3 axis gimbal 6 axis robot 5 axis cnc machine cnc 5 axis axis ip camera cctv security camera ...
Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF. StandIDEKO S.Coop ... 3-Axis encoder input > ... has developed a state-of-the-art ultrasonic inspection system f ...
Phoenix Inspection Systems Limited have further developed their ultrasonic NDT solution for the automated inspection of train ... 3-Axis encoder input > ... z o.o.-PH Tool Reference Standards-Phoenix Inspection Systems ... Phoenix ISL Development for Automated Train Hollow Axle Inspection. StandPhoenix Inspection Systems Ltd ... GB Inspection Systems Ltd.-Guided Ultrasonics Ltd.-Hillger NDT GmbH-IDEKO S.Coop-IMASONIC SAS-IMG ULTRASUONI SRL-InfraTec GmbH- ...
5b). However, if, after inspection, a peak is to be defined as true, it can be manually defined as an R-peak (Fig. 5c). Thus, ... 2 Raw data plot on a scrollable axis and the possibility to cut data manually. 3 Data plot with detected artifacts and the ... This results in two similar peaks at t = 8.81 s and t = 8.88 s. In cases such as this, visual inspection or completely ... The common practice of only visual inspection of extra or missing IBIs is highly questionable, in terms of reliability and ...
1.woking video of robot arm in injection moulding machine as an example,need more welcome to ask: https://www.youtube.com/watch?v=pwiQuJrwVh8 2.Robot arm to be equipped with injection blow/molding machine or other plastic machine,in stead of people...
Facility Inspection and Maintenance. We help devise innovative maintenance strategies. Our staff develops technologically ... advanced robotic tools to perform inspection and maintenance work in hostile environments and hard-to-reach locations. ...
Travel-X.Y Axis: 400*300(mm). *Travel-Z Axis (mm): 150 ... Digital Inspection and Measurement Microscope (EV-4030) Min. ...
These buildings are arranged parallel to the highway on a NW-SE axis. Nearest to the roadway is the Inspection Station ( ... The two 1,280 sq, ft, residences are located about 50 west of the Inspection Station. They are set at the top of a small slope ... The Inspection Station building is primarily constructed of wood framing. The structure also includes brick bearing walls and ... A projecting 16 tall, 30 by 41 canopy is located in front of the central portion to protect the vehicle inspection lanes. ...
Samples in gray were removed from the analysis after visual inspection. PC1 and PC2 are displayed on the x axis and y axis, ... Genomic position is plotted on the x axis, and the −log10 of the P value is displayed on the y axis. The threshold for exome- ... S2). Inspection of the distribution of χ2 (score) tests showed an overdispersion of test statistics (genomic control λ estimate ... technical replicates were plotted on a linear y axis against the concentration of the serially diluted AAT on the log10 x axis ...
Geomagic Design and Inspection Software. Geomagic Design X is the industrys most comprehensive reverse engineering software, ... To maintain tool rigidity, 5-Axis Porting maintains 3-axis machining (3 + 2 mode) as far into the port as possible until 5-axis ... Features of GibbsCAM 5-Axis Porting Option. The software can automatically detect the spine curve through the port and properly ... In addition to ease and speed, the GibbsCAM 5-Axis Porting option generates a cleaner, more efficient toolpath for faster ...
... for performing the above method wherein each of three main movable elements of the machine is assigned a dimensional axis in ... When the inspection box reaches the end of inspection band 105, it increments back to the beginning and is moved down one line ... The X, Y, and Z axes shown to the right of thermode 36 indicate that its position is adjustable along and X and Y axis and ... Once the inspection bands and inspection box have been created (box 206), a convolution subroutine is performed using a valley- ...
Cool Muscle motors are used for X & Y axes for CCD inspection application.. Communication speed and space saving cofiguration ...
Geomagic Design and Inspection Software. Geomagic Design X is the industrys most comprehensive reverse engineering software, ... 5-axis depth cuts machining.. "5-axis technology provides the user with the ultimate amount of control when applying tooling to ... In addition to the new 5-axis enhancements, a number of 3-axis enhancements for GibbsCAM will also be previewed at EASTEC, ... Surface edge 5-axis swarf cutting (trimming vacuum-formed parts). *Adaptable interface, based on part type strategy, shows only ...
optic - relating to or using sight; "ocular inspection"; "an optical illusion"; "visual powers"; "visual navigation". visual, ... "; "the optic (or optical) axis of the eye"; "an ocular spot is a pigmented organ or part believed to be sensitive to light" ...
6-axis, Scara, Others); By Application (Welding, Palletizing, Packaging, Material Handling, Others); By Industry (Food and ... 7.6.2. Inspection. 7.6.3. Testing. 7.6.4. Cutting. 7.6.5. Grinding. 7.7. Painting. 7.8. Others. 8. Industrial Robotics Market- ... Industrial Robotics Market Analysis: By Type (Cartesian, 6-axis, Scara, Others); By Application (Welding, Palletizing, ... The key industrial robot which are applied across several industries are Cartesian, Scara, Articulated, Cylindrical, 6-axis and ...
Axis Biochemicals As. System US6168957B1 (en) * 1997-06-25. 2001-01-02. Lifescan, Inc.. Diagnostic test strip having on-strip ... Readhead for optical inspection apparatus US10/556,299 US7499154B2 (en) 2003-06-03. 2004-06-03. Readhead for optical inspection ... and an optical inspection position in which the tray 120 is retracted inwardly into the housing 107 of the inspection apparatus ... US7499154B2 - Readhead for optical inspection apparatus - Google Patents. Readhead for optical inspection apparatus Download ...
Tube Inspection Systems utilize non-contact, IR probes.. ROMER non-contact tube inspection systems meet needs of tube and wire ... It can be configured with Y-axis up to 29.5 ft, and adjustable W-axis provides up to 16.4 ft of vertical travel to complement ... Five-Axis Gantry Mill is built for tall part manufacturing.. Designed to minimize downtime, part reorientation, and setup, ... It combines very high flexibility with the fast placement speed of an 8-axes placer. Essemtec is the Swiss provider of Real ...
  • Kawasaki encourages motorcycle enthusiasts to "let the good times roll," but good times of another sort are rolling at the company's Maryville, MO small engine plant, where two 5-axis scanning probe systems are slashing CMM inspection and probe calibration times, and speeding up QC feedback for machining of small engine components. (renishaw.com)
  • The REVO-equipped CMMs have cut inspection times by half or more on scanning intensive applications, eliminated the need for custom probe configurations, cut probe calibration times from six to seven hours to about 45 minutes, and added new capability to collect large amounts of form measurement data, improving part quality. (renishaw.com)
  • 3D Or Three-Axis Calibration: What's The Difference? (mmsonline.com)
  • Before launching into the differences between three-axis and 3D calibration, it's helpful to understand that most machine tool positioning systems are based on the Cartesian coordinate system, which uses a series of points along three coordinate axes (X, Y and Z) aligned perpendicular to one another to represent 3D objects or features. (mmsonline.com)
  • Much of the confusion surrounding three-axis and 3D calibration has to do with terminology. (mmsonline.com)
  • A shop that just calibrates linear displacement along each of the three axes may consider this three-axis calibration. (mmsonline.com)
  • The new PH20 probe head also benefits CMM users with adaptive positioning to accommodate part misalignment, fast calibration routines and an integral TP20 probe mount that optimises the working volume of the CMM, bringing five-axis capability to smaller machines. (theengineer.co.uk)
  • Today, advancements in software, calibration techniques and fixture tooling have made it practical to add 4th or 5th axis rotary motion to three-axis multisensor systems, enabling complete inspections of many turned, shaped or rounded parts in a single setup. (qualitymag.com)
  • Based on rigid body geometry, which defines positions by forming 90-degree angles with an axis of a given reference frame, each of a given machine tool's three axes is susceptible to six errors for a total of 18. (mmsonline.com)
  • The Z-axis differentiates between axial-flow geometry and radial-flow geometry within the physical domain of turbomachinery. (wikipedia.org)
  • Horizontal machining centers feature two-pallet APCs and 10 and 12 pallet changers and full rotational B axis machining. (sme.org)
  • As the flow passes through the centrifugal impeller, the impeller forces the flow to spin faster as it gets further from the rotational axis. (wikipedia.org)
  • Dr. Francisco Garcia-Moreno and his team have designed a turntable that rotates ultra-stably about its axis at a constant rotational speed. (innovations-report.com)
  • The 9600 uses a linear motor for X-axis scanning, a tower-mounted scan reference platform, and is rated for Class 1000 cleanroom operation. (electroiq.com)
  • OD pipeline section Typical Challenges of Long Seam Weld Inspection Inspecting a long seam-or axial-weld is challenging both acoustically and mechanically. (ndt.net)
  • PI's multi-axis piezo flexure stages allow positioning and scanning with sub-nanometer precision in up to 6 axis, including tip, tilt and yaw motion. (physikinstrumente.com)
  • Xi'an Huashun Measuring Equipment Co.,Ltd is one of the leading China single axis magnetometer manufacturers and suppliers,Website:http://www.smagall.com, welcome to buy high precision single axis magnetometer, single axis fluxgate magnetometer, single component magnetometer, single component fluxgate magnetometer, magnetic detection, magnetic inspection from our factory. (kitairu.net)
  • Five-Axis Gantry Mill is built for tall part manufacturing. (thomasnet.com)
  • That complexity along with demands for top quality and cost-effectiveness dictate the use of five-axis simultaneous machining for many operations. (sme.org)
  • using a first acousto optic deflector for deflecting the polarized beams along the reference path and measuring path of a first axis and using a second acousto optic deflector for deflecting polarized beams along the reference path and a measuring path of a second axis. (google.com)
  • It provides thorough end-of-line quality assurance with redundant device inspection at tray and tape outputs. (controleng.com)
  • For locating parts or features, PatMax provides the maximum vision inspection yield and reliability available in a vision system. (theengineer.co.uk)
  • When the entire vision inspection cycle cannot be completed before the next product is in position for image acquisition, system designers can consider several alternatives. (assemblymag.com)
  • Therefore, it is essential to determine a reliable inspection interval. (wikipedia.org)
  • A cascade chart is an alternative way from the traditional damage tolerance analysis (DTA) methodology for determining a reliable inspection interval. (wikipedia.org)
  • PI does not only develop and produce a broad range of positioning stages and actuators for linear, rotary and vertical motion or combinations of different axes. (physikinstrumente.com)
  • Microscopy sample preparation equipment and metallography sample preparation equipment is used for the preparation of samples for metallographic or microscopic inspection and analysis. (globalspec.com)
  • Designed to minimize downtime, part reorientation, and setup, adjustable-rail U6 Series enables 5-axis machining and contouring with automatically interchangeable heads. (thomasnet.com)
  • A device which enables inspection of the eye without dilatation of the pupils. (medwow.com)
  • All the vertical axis wind turbine science fair projects kits allow you to build a generator that runs off of a magnetic induction using 4 pre-wound coils and 4 magnets rather than a snap and plug. (super-science-fair-projects.com)
  • Within the physical domain the vertical axis differentiates between high speeds and low speeds depending upon the turbomachinery application. (wikipedia.org)
  • p = 1 − Π i = 1 n ( 1 − p i ) {\displaystyle p=1-\Pi _{i=1}^{n}(1-p_{i})} The variable pi represents the probability of detection for each crack size, and the variable n represents the number of inspections conducted. (wikipedia.org)
  • FSM is a non-intrusive corrosion inspection method designed to detect small changes in pipe wall thickness. (ndt.net)
  • 2004). AXIS USA offers the conveniences of a purpose-built 120,000 square foot facility to handle multiple studies at once, including an in-house Bioanalytical lab capable of handling over 15,000 samples per month, an on-site Dermatology Center, and a fully licensed Pharmacy. (prweb.com)
  • Tissue microarray analysis was used to verify the physiologic relevance of the HGF/MET axis in human samples. (aacrjournals.org)
  • XT H 320 for X-ray and CT inspection of larger samples. (nikonmetrology.com)
  • Our staff develops technologically advanced robotic tools to perform inspection and maintenance work in hostile environments and hard-to-reach locations. (hydroquebec.com)
  • The horizontal axis represents the energy equation derivable from The first law of thermodynamics . (wikipedia.org)
  • Again, the horizontal axis represents the energy equation with turbines generating power to the left and compressors absorbing power to the right. (wikipedia.org)
  • According to Bertz, the ST-868 dramatically changes the productivity equation for back-end inspection and packaging. (controleng.com)
  • A cascade chart is tool that can be used in damage tolerance analysis to determine the proper inspection interval, based on reliability analysis, considering all the context uncertainties. (wikipedia.org)
  • Elmo Motion Control (Westford, MA) has unveiled its Maestro Multi-Axis Supervisor with firmware for support of the DS305 configuration protocol, DS401 CAN network IO integration protocol, and the DS402 motion control protocol. (techbriefs.com)
  • Automatic real-time inspection and the capability to accumulate comprehensive records also helps in meeting regulatory and legal requirements such as FDA documentation. (assemblymag.com)
  • The most recent audit focused on Dermatology which has been a business focus for AXIS since our inception and we have invested heavily to build our capabilities and serve our customer's needs. (prweb.com)
  • ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence. (ndt.net)