Dental Models: Presentation devices used for patient education and technique training in dentistry.Dental Care: The total of dental diagnostic, preventive, and restorative services provided to meet the needs of a patient (from Illustrated Dictionary of Dentistry, 1982).Education, Dental: Use for articles concerning dental education in general.Schools, Dental: Educational institutions for individuals specializing in the field of dentistry.Students, Dental: Individuals enrolled a school of dentistry or a formal educational program in leading to a degree in dentistry.Dental Caries: Localized destruction of the tooth surface initiated by decalcification of the enamel followed by enzymatic lysis of organic structures and leading to cavity formation. If left unchecked, the cavity may penetrate the enamel and dentin and reach the pulp.Dental Care for Chronically Ill: Dental care for patients with chronic diseases. These diseases include chronic cardiovascular, endocrinologic, hematologic, immunologic, neoplastic, and renal diseases. The concept does not include dental care for the mentally or physically disabled which is DENTAL CARE FOR DISABLED.Dental Care for Children: The giving of attention to the special dental needs of children, including the prevention of tooth diseases and instruction in dental hygiene and dental health. The dental care may include the services provided by dental specialists.Dental Clinics: Facilities where dental care is provided to patients.Dental Pulp: A richly vascularized and innervated connective tissue of mesodermal origin, contained in the central cavity of a tooth and delimited by the dentin, and having formative, nutritive, sensory, and protective functions. (Jablonski, Dictionary of Dentistry, 1992)Dental Hygienists: Persons trained in an accredited school or dental college and licensed by the state in which they reside to provide dental prophylaxis under the direction of a licensed dentist.Faculty, Dental: The teaching staff and members of the administrative staff having academic rank in a dental school.Dental Care for Disabled: Dental care for the emotionally, mentally, or physically disabled patient. It does not include dental care for the chronically ill ( = DENTAL CARE FOR CHRONICALLY ILL).Dental Anxiety: Abnormal fear or dread of visiting the dentist for preventive care or therapy and unwarranted anxiety over dental procedures.Insurance, Dental: Insurance providing coverage for dental care.Dental Auxiliaries: Personnel whose work is prescribed and supervised by the dentist.Dental Health Services: Services designed to promote, maintain, or restore dental health.Dental Research: The study of laws, theories, and hypotheses through a systematic examination of pertinent facts and their interpretation in the field of dentistry. (From Jablonski, Illustrated Dictionary of Dentistry, 1982, p674)Dental Care for Aged: The giving of attention to the special dental needs of the elderly for proper maintenance or treatment. The dental care may include the services provided by dental specialists.Dental Arch: The curve formed by the row of TEETH in their normal position in the JAW. The inferior dental arch is formed by the mandibular teeth, and the superior dental arch by the maxillary teeth.Dental Plaque: A film that attaches to teeth, often causing DENTAL CARIES and GINGIVITIS. It is composed of MUCINS, secreted from salivary glands, and microorganisms.Mandibular Condyle: The posterior process on the ramus of the mandible composed of two parts: a superior part, the articular portion, and an inferior part, the condylar neck.Patents as Topic: Exclusive legal rights or privileges applied to inventions, plants, etc.Bites and StingsTemporomandibular Joint: An articulation between the condyle of the mandible and the articular tubercle of the temporal bone.Jaw: Bony structure of the mouth that holds the teeth. It consists of the MANDIBLE and the MAXILLA.Speech Articulation Tests: Tests of accuracy in pronouncing speech sounds, e.g., Iowa Pressure Articulation Test, Deep Test of Articulation, Templin-Darley Tests of Articulation, Goldman-Fristoe Test of Articulation, Screening Speech Articulation Test, Arizona Articulation Proficiency Scale.Occipital Bone: Part of the back and base of the CRANIUM that encloses the FORAMEN MAGNUM.Telescopes: Instruments used to observe distant objects.ArchivesElectric Power Supplies: Devices that control the supply of electric current for running electrical equipment.Halogens: A family of nonmetallic, generally electronegative, elements that form group 17 (formerly group VIIa) of the periodic table.Costs and Cost Analysis: Absolute, comparative, or differential costs pertaining to services, institutions, resources, etc., or the analysis and study of these costs.Energy Metabolism: The chemical reactions involved in the production and utilization of various forms of energy in cells.Moral Obligations: Duties that are based in ETHICS, rather than in law.Prescription Drug Misuse: Improper use of drugs or medications outside the intended purpose, scope, or guidelines for use. This is in contrast to MEDICATION ADHERENCE, and distinguished from DRUG ABUSE, which is a deliberate or willful action.Commerce: The interchange of goods or commodities, especially on a large scale, between different countries or between populations within the same country. It includes trade (the buying, selling, or exchanging of commodities, whether wholesale or retail) and business (the purchase and sale of goods to make a profit). (From Random House Unabridged Dictionary, 2d ed, p411, p2005 & p283)PrintingDental Materials: Materials used in the production of dental bases, restorations, impressions, prostheses, etc.Printers' MarksOrthodontic Appliances, Removable: Dental devices such as RETAINERS, ORTHODONTIC used to improve gaps in teeth and structure of the jaws. These devices can be removed and reinserted at will.Uvula: A fleshy extension at the back of the soft palate that hangs above the opening of the throat.Denture, Partial: A denture replacing one or more (but not all) natural teeth. It is supported and retained by underlying tissue and some or all of the remaining teeth.Otorhinolaryngologic Surgical Procedures: Surgery performed on the ear and its parts, the nose and nasal cavity, or the throat, including surgery of the adenoids, tonsils, pharynx, and trachea.Orthodontic Appliances: Devices used for influencing tooth position. Orthodontic appliances may be classified as fixed or removable, active or retaining, and intraoral or extraoral. (Boucher's Clinical Dental Terminology, 4th ed, p19)Palate, Soft: A movable fold suspended from the posterior border of the hard palate. The uvula hangs from the middle of the lower border.Denturists: Individuals who fabricate and fit DENTURES without the supervision of DENTISTS. (from Stedman's Medical Dictionary, 27th ed) They may or may not have formal education in health sciences, but are well versed in the art of constructing dentures.Medicaid: Federal program, created by Public Law 89-97, Title XIX, a 1965 amendment to the Social Security Act, administered by the states, that provides health care benefits to indigent and medically indigent persons.Models, Organizational: Theoretical representations and constructs that describe or explain the structure and hierarchy of relationships and interactions within or between formal organizational entities or informal social groups.Directories as Topic: Lists of persons or organizations, systematically arranged, usually in alphabetic or classed order, giving address, affiliations, etc., for individuals, and giving address, officers, functions, and similar data for organizations. (ALA Glossary of Library and Information Science, 1983)Dental Prosthesis: An artificial replacement for one or more natural teeth or part of a tooth, or associated structures, ranging from a portion of a tooth to a complete denture. The dental prosthesis is used for cosmetic or functional reasons, or both. DENTURES and specific types of dentures are also available. (From Boucher's Clinical Dental Terminology, 4th ed, p244 & Jablonski, Dictionary of Dentistry, 1992, p643)Audiovisual Aids: Auditory and visual instructional materials.Cone-Beam Computed Tomography: Computed tomography modalities which use a cone or pyramid-shaped beam of radiation.Oral Health: The optimal state of the mouth and normal functioning of the organs of the mouth without evidence of disease.Denture, Partial, Fixed: A partial denture attached to prepared natural teeth, roots, or implants by cementation.Dental Prosthesis, Implant-Supported: A prosthesis that gains its support, stability, and retention from a substructure that is implanted under the soft tissues of the basal seat of the device and is in contact with bone. (From Boucher's Clinical Dental Terminology, 4th ed)Dental Prosthesis Design: The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal.

Back to basics: making a vacuum-formed, custom-fitted intraoral mouthguard using the "dry model" technique. (1/340)

For a mouthguard to function properly, it must fit well. It is possible to produce a well-fitting mouthguard using the "dry model" technique, which is relatively inexpensive and easy to learn. Custom-fitted intraoral mouthguards help prevent or reduce the severity of concussions as well as minimize oral cavity injuries.  (+info)

An appraisal of the Peer Assessment Rating (PAR) Index and a suggested new weighting system. (2/340)

The PAR Index was developed to measure treatment outcome in orthodontics. Validity was improved by weighting the scores of some components to reflect their relative importance. However, the index still has limitations, principally due to the high weight assigned to overjet. Difficulties also arise from the application of one weighting system to all malocclusions, since occlusal features vary in importance in different classes of malocclusion. The present study examined PAR Index validity using orthodontic consultant assessments as the 'Gold standard' and clinical ranking of occlusal features and statistical modelling to derive a new weighting system, separate for each malocclusion class. Discriminant and regression analyses were used to derive new criteria for measuring treatment outcome. As a result a new and more sensitive method of assessment is suggested which utilizes a combination of point and percentage reductions in PAR scores. This was found to have better correlations with the 'Gold standard' than the PAR nomogram.  (+info)

The effects of increasing the reverse curve of Spee in a lower archwire examined using a dynamic photo-elastic gelatine model. (3/340)

This paper describes the development and testing of a dynamic in vitro photo-elastic model for evaluating the effects of orthodontic mechanics on an entire arch of teeth. A model of a mandibular arch was made and the teeth were embedded in a gelatine material with a high level of mechanical creep which permitted tooth movement in response to orthodontic forces. The excellent photo-elastic properties of this material also facilitated the analysis of the stress distribution around the roots of the teeth. The model of a mandibular arch was used to investigate the tooth movements and stress distributions produced by increasing the reverse curve of Spee in a 0.018 x 0.025-inch stainless steel archwire. The results revealed that a 1-mm reverse curve of Spee increased the arch length by 1.6 mm, but increasing the reverse curve of Spee to 5 mm did not increase arch length further. Photo-elastic analysis showed an increased stress distribution around the roots of the incisors and molars as the reverse curve of Spee was increased in the archwire.  (+info)

A 3D computer-aided design system applied to diagnosis and treatment planning in orthodontics and orthognathic surgery. (4/340)

The purpose of this article is to describe a newly developed 3D computer-aided design (CAD) system for the diagnostic set-up of casts in orthodontic diagnosis and treatment planning, and its preliminary clinical applications. The system comprises a measuring unit which obtains 3D information from the dental model using laser scanning, and a personal computer to generate the 3D graphics. When measuring the 3D shape of the model, to minimize blind sectors, the model is scanned from two different directions with the slit-ray laser beam by rotating the mounting angle of the model on the measuring device. For computed simulation of tooth movement, the representative planes, defined by the anatomical reference points, are formed for each individual tooth and are arranged along a guideline descriptive of the individual arch form. Subsequently, the 3D shape is imparted to each of the teeth arranged on the representative plane to form an arrangement of the 3D profile. When necessary, orthognathic surgery can be simulated by moving the mandibular dental arch three-dimensionally to establish the optimum occlusal relationship. Compared with hand-made set-up models, the computed diagnostic cast has advantages such as high-speed processing and quantitative evaluation on the amount of 3D movement of the individual tooth relative to the craniofacial plane. Trial clinical applications demonstrated that the use of this system facilitated the otherwise complicated and time-consuming mock surgery for treatment planning in orthognathic surgery.  (+info)

The influence of maxillary incisor inclination on arch length. (5/340)

This ex vivo study was designed to investigate Andrews' hypothesis that there is a space implication when incisors are torqued correctly. A working model was constructed to allow acrylic typodont incisors of varying known values of inclination to be substituted into the model. The arch lengths of the various 'set-ups' were measured using a reflex microscope linked to a PC. In order to quantify the space requirement of clinical relevance for adequate incisor torque, the method was repeated by substituting replicas of patients' 'natural' incisors. For both acrylic and natural incisors it was found that, as the inclination of the teeth increased, there was an increase in all arch lengths, this being greater for the natural incisors. This larger increase for the natural incisors was related not only to their increased size, but was also dependent on the morphology of the incisor. Those incisors which were parallel-sided showed the greatest increase in arch length, whereas the incisors that were relatively triangular in shape showed the smallest increase. When the inclination of an 'average' set of 21/12 is increased by 5 degrees, an increase in the arch length of approximately 1 mm may be expected.  (+info)

The effectiveness and efficiency of hygienists in carrying out orthodontic auxiliary procedures. (6/340)

The aim of this study was to compare the ability and efficiency of dental hygienists, after preliminary training as orthodontic auxiliaries, with post-graduate orthodontists. The study was cross-sectional and prospective. The sample consisted of five second-year hygienists and five qualified orthodontists from Manchester University Dental Hospital. All subjects carried out a range of orthodontic exercises on phantom head typodonts. The ability and efficiency for each task was measured, and comparison made between hygienists and orthodontic groups. There was no statistically significant differences between hygienists and orthodontists in terms of their ability to carry out potential orthodontic auxiliary procedures. However, orthodontists were more efficient (P < 0.05). The ability of hygienists to carry out potential orthodontic auxiliary tasks after appropriate training is supported. Trained orthodontists are more efficient than newly trained hygienists in carrying out potential orthodontic auxiliary tasks.  (+info)

Residual need in orthodontically untreated 16-20-year-olds from areas with different treatment rates. (7/340)

Knowledge concerning residual orthodontic need among individuals who have passed the age at which orthodontic treatment is normally provided, is important in the discussion of guidelines for the provision of care. The purpose of the present study was to examine and compare orthodontic need (objective and subjective) in cohorts of orthodontically untreated individuals from areas with various treatment rates. A total of 250 individuals, aged 16-20 years, comprised four samples representing cohorts from areas in Norway with low, medium, and high treatment rates. The occlusion was assessed according to a treatment need index (NOTI) from clinical and radiographic records, and dental cast measurements. Attitudes were assessed from questionnaires addressing satisfaction with dental arrangement, desire for treatment, and value placed upon well-aligned teeth. A significant decrease in occurrence of normative need (P < 0.001) and reported dissatisfaction (P < 0.05) was observed in samples representing increasing treatment rates. Dissatisfaction was completely eliminated among individuals from the high treatment rate area. Although a significant association between severity of malocclusion and desire for treatment existed within samples, this was not reflected in a corresponding trend for a decrease in desire across the samples. Well-aligned teeth seemed to be taken for granted among individuals from the area with a high treatment rate. From the present observations, a 'correct' level of treatment provision could not be identified.  (+info)

Initial cleft size does not correlate with outcome in unilateral cleft lip and palate. (8/340)

Clinical outcomes in children born with a cleft lip and palate (CLP) have been an area of interest for orthodontists for a number of years. Whilst tools for measurement of these outcomes are available, there is no widely accepted measure of initial cleft severity and no known quantitative indices. Therefore, the potential influence of initial severity remains unmeasured and largely ignored. The aim of this investigation was to determine the importance of initial cleft severity in determining patient outcome. The longitudinal records of 49 children born with a unilateral cleft lip and palate (UCLP), and treated in a single centre were examined. An index of initial cleft severity was developed that categorizes the cleft area as a percentage of the total palate area. The dental arch relationships of the same patients at 6 years of age were also determined. The nature of the association between these was investigated for agreement and correlation by calculation of weighted Kappa and Spearman's correlation coefficient, respectively. No evidence was found in this sample that the initial cleft area had any bearing on the quality of outcome at 6 years of age.  (+info)

  • In spring 2016, Formlabs released Dental SG, our first biocompatible dental material, and by the end of 2017, we're on track to offer six dedicated materials for dentistry. (formlabs.com)
  • Learn more about Formlabs' new dental materials, and integration with 3Shape. (formlabs.com)
  • We'd work on new formulations, churn out new prints, get feedback from dentists and dental technicians, and return to our lab to continue improving the material," said Rachel Davis, the Formlabs materials scientist who led Dental Model's development. (formlabs.com)
  • Crown and bridge model printing is one of the most demanding dental applications, requiring accuracy below +/- 50 microns at margins and contact points, and +/- 100 microns across the full arch. (formlabs.com)
  • When checking the fit of final restorations before a procedure, any deviation may mean the restorations won't fit on the model, or worse, the failure will be found only during or after the procedure. (formlabs.com)
  • With each new material, the same 3D printer becomes capable of manufacturing an increasing range of dental products, which previously required manual labor or expensive machinery like CNC mills. (formlabs.com)
  • Designed especially for use in dental and orthodontic solutions, these materials combine accurate detail visualization with high dimensional stability. (edacafe.com)
  • Orthodontic treatments involve repositioning misaligned teeth and improving bite configurations for improved cosmetic appearance and dental function. (google.es)
  • Such repositioning may be accomplished with a variety of orthodontic treatments and dental appliances, including conventional braces, spring retainers, positioners, and other removable aligners. (google.es)
  • Include periodontal model with gum receding disease, inflamed root canal, orthodontic ligature tying installation and much more. (buyamag.com)
  • To achieve tooth movement, orthodontists utilize their expertise to first determine a three-dimensional mental image of the patient's physical orthodontic structure and a three-dimensional mental image of a desired physical orthodontic structure for the patient, which may be assisted through the use of x-rays and/or models. (google.com)
  • Orthodontic supplies in this line include typodonts (typodont teeth), teeth and wax forms, and orthodontic study models. (paradigmmodels.com)
  • He was the graduate of University of Washington's first dental class in 1950 and also the first orthodontic class of 1952. (wikipedia.org)
  • Researchers at Tufts University School of Dental Medicine (TUSDM) now show that using a collagen-based biomaterial to deliver stem cells inside damaged teeth can regenerate dental pulp-like tissues in animal model experiments. (healthcanal.com)
  • This project was supported by awards from the National Institute of Dental and Craniofacial Research of the National Institutes of Health (RO1DE016132, and a Ruth L. Kirschstein National Research Service Award, F31DE016132 to Liz Smith), Tufts University School of Dental Medicine Masters Project, and Tufts Center for Neuroscience Research, which is supported by an award from the NIH National Institute of Neurological Disorders and Stroke (NS047243). (healthcanal.com)
  • Bress says a lack of fluoridated water in all but a few communities results in many cases of dental caries, so the need in Cecil is great. (umaryland.edu)
  • The aim was to measure the effect of StN21 on the rate of mineral loss in a model system for dental caries and erosion using HAp subjected to artificial carious and erosive conditions. (springer.com)
  • StN21 has been shown to be a potent and stable peptide that has potential as a preventive/therapeutic agent in the treatment of enamel erosion and dental caries. (springer.com)
  • It consists of three teeth, seated in their sockets, that shows the progressive deterioration of tooth structure by dental caries. (inds.co.uk)
  • It's been well over a year now since the CDC published their "Summary of Infection Prevention Practices in Dental Settings" in the Spring of 2016. (amerdental.com)
  • Recende Medical manufacture and export Dental Equipment & Dental Materials over 12 years, approval ISO13485:2016 and CE certificate. (recende-dental.com)
  • Dental technicians worldwide rely on the KaVo c omfortable and powerful dental laboratory handpieces - including an universal control unit. (kavo.com)
  • For you to be able to be work professionally, you will need the best dental laboratory equipment. (kavo.com)
  • The KaVo dental laboratory systems are economical for working efficiently in the long term. (kavo.com)
  • If you are planning a renovation, extension or new dental laboratory, KaVo's experienced planning team will be happy to advise you. (kavo.com)
  • Single user, multi-user and central dust extraction systems for your dental laboratory and for your health. (kavo.com)
  • Difficulties with in vivo studies of natural plaque and its complex, heterogeneous structure have led to development of laboratory biofilm plaque model systems. (nih.gov)
  • In the second approach, microcosm plaque biofilms are evolved in vitro from the natural oral microflora to the laboratory model most closely related to plaque in vivo. (nih.gov)
  • We explore how biofilms can be removed from implant surfaces using a variety of novel methods, without causing surface damage or other undesirable modifications, and show how different laboratory and clinical models can be used to assess the performance of both conventional and novel methods of biofilm removal. (intechopen.com)
  • Dental laboratory techniques are changing, growing more digital and moving toward the electronic age at a rapid pace, as most technicians know. (dentalproductsreport.com)
  • Methods and Materials: This laboratory study included taking addition silicone, polyether and vinyl polyether silicone impressions from an epoxy reference model that was created from an original typodont. (tufts.edu)
  • 3. A method as in claim 2 , wherein inserting the coupling member on an individual tooth model into a corresponding port situates the tooth in a desired orientation relative to the frame. (google.es)
  • New anatomy app called 3B Smart Anatomy now included for FREE with Lower Incisor Human Tooth Model, 2 part. (a3bs.com)
  • Each Medicaid managed care dental plan is responsible for contracting with general dentists, pediatric dentists, and dental specialists to create a delivery network. (tmhp.com)
  • Even as more and more intraoral digital impression capture systems come onto the marketplace, for labs working with dentists who prefer to follow the traditional tray-based route of impression capture yet want to eliminate models from there workflow procedures, there is an increasing number of options for scanning the tray impression from the dentist directly into a CAD system using a benchtop scanner. (dentalproductsreport.com)
  • Established in 1982, Practicon, Inc. began with a vision of improving dental health and dentists' professional success through patient education. (practicon.com)
  • The ability to temporarily bond restorations, crowns, or bridges allows dentists the time they need to create more permanent restorations without sacrificing patient comfort and dental function. (kerrdental.com)
  • The headband loupes can be used both by surgeons , dentists , dental students , dental hygienists and other dental and medical professionals who need to use magnification optical aids for their work. (loupedirect.com)
  • The flip-up headband dental loupe 3.0x is designed for those dental hygienists and dentists who need more magnification. (loupedirect.com)
  • It is an ideal reference for medical and dental students and professionals (dentists, oral and maxillofacial surgeons, orthopedic surgeons, prosthodontics) who are involved in implantology and tissue engineering. (eurekaselect.com)
  • We'd work on new formulations, churn out new prints, get feedback from dentists and dental technicians, and return to our lab to continue improving the material," said Rachel Davis, the Formlabs materials scientist who led Dental Model's development. (formlabs.com)
  • August 19, 2010 -- Can using a sophisticated plastic model of the teeth, gums, and oral cavity help dental students learn to give local anesthesia injections? (drbicuspid.com)
  • Now operating as a fully integrated dental clinical enterprise, the center is setting a new bar for patient care and service in the world of oral health care. (ucsf.edu)
  • A Proven Solution: A new member of the oral health team - the CDHC - combined with Medicaid dental benefits. (modernhealthcare.com)
  • Lack of access to any form of safe basic treatment for oral disease and dental infection in rural Tanzania. (bridge2aid.org)
  • Reynolds thanked supporters and partners in "this innovative, sustainable model for high-quality oral health care delivery," which is believed to be the first of its kind nationally. (umaryland.edu)
  • Fill the inner-cup with water, place any intra-oral device into the Dental Spa, close the lid, and you are ready to clean and sanitize! (just4teeth.com)
  • A digital dental model can be generated by directly scanning intraoral structures, by scanning a conventional impression of oral structures or by scanning a stone cast poured from the conventional impression. (tufts.edu)
  • This review introduces a new approach to geographical analysis of oral health outcomes in neighbourhoods and small area geographies through two novel simulation methods-spatial microsimulation and agent-based modelling. (whiterose.ac.uk)
  • People with dental phobia often avoid the dentist and neglect oral health, which may lead to painful dental problems and ultimately force a visit to the dentist. (wikipedia.org)
  • OR CALL 800-686-5232 Dental Model with Variety of Dental Restorations all in one: Chrome and Acrylic Removable Partial Denture, Key and Keyway Precision Attachment, Ceramic On Lay, Laminate Veneer, Post & Core, Ceramic Crown Porcelain Bounded to Metal 3 Unit Bridge, Single Metal Crown Implant in. (dentaltown.com)
  • Our image gives the reader a look at the appearance of the liquid within a model after it has been converted to a semi-hardened state-which will be light cured and completely hardened by the technician before being given to the ceramists for completion of the restorations. (dentalproductsreport.com)
  • Whether you require a flowable composite, universal dental composite, or Single-Fill™ composite system, Kerr's products provide superior handling, versatility and excellent results, making dental restorations undetectable and enjoyable. (kerrdental.com)
  • Our dental cements are based on an innovative chemistry to optimize dental restorations for unmatched esthetics, adhesion and great versatility. (kerrdental.com)
  • When checking the fit of final restorations before a procedure, any deviation may mean the restorations won't fit on the model, or worse, the failure will be found only during or after the procedure. (formlabs.com)
  • Each Denture Model is Accurately Detailed, Life-Like, Demonstrate Dental Pathologies, Diseases and show the Surgery Techniques how to repair them. (buyamag.com)
  • An overview of the experimental and theoretical studies on residual stresses in dental composites is given and the underlying phenomena of the development of residual stresses are specified. (fraunhofer.de)
  • The experimental and modelling techniques for assessing residual stresses are discussed. (fraunhofer.de)
  • This study was designed with the ultimate purpose of establishing a tooth pulp tissue engineering using transplantation of dental pulp stem cells, and conducted to select appropriate scaffolds and develop an experimental engineering system using rat molars. (nii.ac.jp)
  • These results suggest that the experimental model used in this study is useful for investigating the pulp tissue regeneratiopn using stem cell transplantation. (nii.ac.jp)
  • To assess the numerical accuracy and to validate the model established, a convergence test and experimental verification are also presented. (edu.au)
  • For more information, visit http://ppc.uiowa.edu/news/2017/03/15/reynolds-damiano-receive-funding-continue-development-patient-centered-dental-home . (uiowa.edu)
  • Jay A. Perman, MD , president of the University of Maryland, Baltimore (UMB), and Mark A. Reynolds, DDS, PhD , dean and professor of UMSOD, joined with local and state officials Sept. 26 to mark the health center's new ownership of a dental clinic that UMSOD had established in Perryville. (umaryland.edu)
  • West Cecil President and Chief Executive Officer John Ness, MBA, presided over a ribbon-cutting outside the spacious dental clinic, which is located on Pulaski Highway not far from the Susquehanna River. (umaryland.edu)
  • How to ensure high safety standards in your dental clinic amid COVID-19 pandemic? (loupedirect.com)
  • An automated 3D finite element (FE) modeling procedure for direct fiber reinforced dental bridge is established on the basis of computer tomography (CT) scan data. (edu.au)
  • In this study, human dental pulp stem cells (DPSCs) and stem cells from the apical papilla (SCAPs) were applied in an in vivo model of dental pulp regeneration in order to compare their regenerative potential and confirm their previously demonstrated paracrine angiogenic properties. (hindawi.com)
  • Transplantation of dental pulp stem cells (DPSCs) even led to a more distinct volume of regenerated dental tissue with a higher capillary density in comparison to a growth factor-based approach [ 9 ]. (hindawi.com)
  • Using GelMA, the team encapsulated a mix of human dental pulp stem cells-obtained from extracted wisdom teeth-and endothelial cells, which accelerate cell growth. (healthcanal.com)
  • All 3Shape dental scanners include Adaptive Impression Scanning, ensuring labs impression capture that truly works and a safe investment. (3shape.com)
  • To date, only 3Shape, DentalWings, and 3dO have announced working relationships that would provide trimmed and sectioned models to labs from scanned tray impression data, which is an integral component of most chairside digital impression capture systems. (dentalproductsreport.com)
  • Learn more about Formlabs' new dental materials, and integration with 3Shape. (formlabs.com)
  • The bony upper jaw/maxillablack has been replaced with a block of vulcanite, so my guess is that this is a model of a prosthetic jaw and dentures as might be needed following facial injury, perhaps used as a showcase for a maxillo-facial surgeon. (1stdibs.com)
  • All-in-One scanning on the D2000 enables users to capture models, all inserted dies, and occlusion information with a single scan. (3shape.com)
  • Using a handheld laser scanner, E4D Labworks has the ability to scan models or impressions without the need for contrast agents. (dentalproductsreport.com)
  • Producing these models digitally from a 3D scan can simplify the workflow, speed up the process, and lower costs. (formlabs.com)
  • A system and method for determining condyle displacement during jaw articulation includes a physical model with corresponding reference points. (google.com)