Adhesives: Substances that cause the adherence of two surfaces. They include glues (properly collagen-derived adhesives), mucilages, sticky pastes, gums, resins, or latex.Tissue Adhesives: Substances used to cause adherence of tissue to tissue or tissue to non-tissue surfaces, as for prostheses.Dentin-Bonding Agents: Cements that act through infiltration and polymerization within the dentinal matrix and are used for dental restoration. They can be adhesive resins themselves, adhesion-promoting monomers, or polymerization initiators that act in concert with other agents to form a dentin-bonding system.Resin Cements: Dental cements composed either of polymethyl methacrylate or dimethacrylate, produced by mixing an acrylic monomer liquid with acrylic polymers and mineral fillers. The cement is insoluble in water and is thus resistant to fluids in the mouth, but is also irritating to the dental pulp. It is used chiefly as a luting agent for fabricated and temporary restorations. (Jablonski's Dictionary of Dentistry, 1992, p159)Dental Bonding: An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing.Adhesiveness: A property of the surface of an object that makes it stick to another surface.Light-Curing of Dental Adhesives: The hardening or polymerization of bonding agents (DENTAL CEMENTS) via exposure to light.Methacrylates: Acrylic acids or acrylates which are substituted in the C-2 position with a methyl group.Dental Cements: Substances used to bond COMPOSITE RESINS to DENTAL ENAMEL and DENTIN. These bonding or luting agents are used in restorative dentistry, ROOT CANAL THERAPY; PROSTHODONTICS; and ORTHODONTICS.Dentin: The hard portion of the tooth surrounding the pulp, covered by enamel on the crown and cementum on the root, which is harder and denser than bone but softer than enamel, and is thus readily abraded when left unprotected. (From Jablonski, Dictionary of Dentistry, 1992)Bisphenol A-Glycidyl Methacrylate: The reaction product of bisphenol A and glycidyl methacrylate that undergoes polymerization when exposed to ultraviolet light or mixed with a catalyst. It is used as a bond implant material and as the resin component of dental sealants and composite restorative materials.Shear Strength: The internal resistance of a material to moving some parts of it parallel to a fixed plane, in contrast to stretching (TENSILE STRENGTH) or compression (COMPRESSIVE STRENGTH). Ionic crystals are brittle because, when subjected to shear, ions of the same charge are brought next to each other, which causes repulsion.Acid Etching, Dental: Preparation of TOOTH surfaces and DENTAL MATERIALS with etching agents, usually phosphoric acid, to roughen the surface to increase adhesion or osteointegration.Dental Stress Analysis: The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures.Composite Resins: Synthetic resins, containing an inert filler, that are widely used in dentistry.Cell Adhesion: Adherence of cells to surfaces or to other cells.Tensile Strength: The maximum stress a material subjected to a stretching load can withstand without tearing. (McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p2001)Phosphoric Acids: Inorganic derivatives of phosphoric acid (H3PO4). Note that organic derivatives of phosphoric acids are listed under ORGANOPHOSPHATES.Dental Enamel: A hard thin translucent layer of calcified substance which envelops and protects the dentin of the crown of the tooth. It is the hardest substance in the body and is almost entirely composed of calcium salts. Under the microscope, it is composed of thin rods (enamel prisms) held together by cementing substance, and surrounded by an enamel sheath. (From Jablonski, Dictionary of Dentistry, 1992, p286)Surface Properties: Characteristics or attributes of the outer boundaries of objects, including molecules.Polymethacrylic Acids: Poly-2-methylpropenoic acids. Used in the manufacture of methacrylate resins and plastics in the form of pellets and granules, as absorbent for biological materials and as filters; also as biological membranes and as hydrogens. Synonyms: methylacrylate polymer; poly(methylacrylate); acrylic acid methyl ester polymer.Orthodontic Brackets: Small metal or ceramic attachments used to fasten an arch wire. These attachments are soldered or welded to an orthodontic band or cemented directly onto the teeth. Bowles brackets, edgewise brackets, multiphase brackets, ribbon arch brackets, twin-wire brackets, and universal brackets are all types of orthodontic brackets.Dentin Permeability: The property of dentin that permits passage of light, heat, cold, and chemical substances. It does not include penetration by microorganisms.Cyanoacrylates: A group of compounds having the general formula CH2=C(CN)-COOR; it polymerizes on contact with moisture; used as tissue adhesive; higher homologs have hemostatic and antibacterial properties.Dental Leakage: The seepage of fluids, debris, and micro-organisms between the walls of a prepared dental cavity and the restoration.Dental Etching: Preparation of TOOTH surfaces, and of materials bonded to teeth or DENTAL IMPLANTS, with agents and methods which roughen the surface to facilitate adhesion. Agents include phosphoric or other acids (ACID ETCHING, DENTAL) and methods include LASERS.Acrylic ResinsFibrin Tissue Adhesive: An autologous or commercial tissue adhesive containing FIBRINOGEN and THROMBIN. The commercial product is a two component system from human plasma that contains more than fibrinogen and thrombin. The first component contains highly concentrated fibrinogen, FACTOR VIII, fibronectin, and traces of other plasma proteins. The second component contains thrombin, calcium chloride, and antifibrinolytic agents such as APROTININ. Mixing of the two components promotes BLOOD CLOTTING and the formation and cross-linking of fibrin. The tissue adhesive is used for tissue sealing, HEMOSTASIS, and WOUND HEALING.Dental Materials: Materials used in the production of dental bases, restorations, impressions, prostheses, etc.Microscopy, Electron, Scanning: Microscopy in which the object is examined directly by an electron beam scanning the specimen point-by-point. The image is constructed by detecting the products of specimen interactions that are projected above the plane of the sample, such as backscattered electrons. Although SCANNING TRANSMISSION ELECTRON MICROSCOPY also scans the specimen point by point with the electron beam, the image is constructed by detecting the electrons, or their interaction products that are transmitted through the sample plane, so that is a form of TRANSMISSION ELECTRON MICROSCOPY.Polymerization: Chemical reaction in which monomeric components are combined to form POLYMERS (e.g., POLYMETHYLMETHACRYLATE).Bursitis: Inflammation or irritation of a bursa, the fibrous sac that acts as a cushion between moving structures of bones, muscles, tendons or skin.Methylmethacrylates: The methyl esters of methacrylic acid that polymerize easily and are used as tissue cements, dental materials, and absorbent for biological substances.Wettability: The quality or state of being wettable or the degree to which something can be wet. This is also the ability of any solid surface to be wetted when in contact with a liquid whose surface tension is reduced so that the liquid spreads over the surface of the solid.Dental Restoration, Permanent: A restoration designed to remain in service for not less than 20 to 30 years, usually made of gold casting, cohesive gold, or amalgam. (Jablonski, Dictionary of Dentistry, 1992)Dental Restoration Failure: Inability or inadequacy of a dental restoration or prosthesis to perform as expected.Dental Cavity Preparation: An operation in which carious material is removed from teeth and biomechanically correct forms are established in the teeth to receive and retain restorations. A constant requirement is provision for prevention of failure of the restoration through recurrence of decay or inadequate resistance to applied stresses. (Boucher's Clinical Dental Terminology, 4th ed, p239-40)Dental Debonding: Techniques used for removal of bonded orthodontic appliances, restorations, or fixed dentures from teeth.Stress, Mechanical: A purely physical condition which exists within any material because of strain or deformation by external forces or by non-uniform thermal expansion; expressed quantitatively in units of force per unit area.Photoinitiators, Dental: Chemical compound used to initiate polymerization of dental resins by the use of DENTAL CURING LIGHTS. It absorbs UV light and undergoes decomposition into free radicals that initiate polymerization process of the resins in the mix. Each photoinitiator has optimum emission spectrum and intensity for proper curing of dental materials.Polyurethanes: A group of thermoplastic or thermosetting polymers containing polyisocyanate. They are used as ELASTOMERS, as coatings, as fibers and as foams.Dental Marginal Adaptation: The degree of approximation or fit of filling material or dental prosthetic to the tooth surface. A close marginal adaptation and seal at the interface is important for successful dental restorations.Dental Alloys: A mixture of metallic elements or compounds with other metallic or metalloid elements in varying proportions for use in restorative or prosthetic dentistry.Cell Adhesion Molecules: Surface ligands, usually glycoproteins, that mediate cell-to-cell adhesion. Their functions include the assembly and interconnection of various vertebrate systems, as well as maintenance of tissue integration, wound healing, morphogenic movements, cellular migrations, and metastasis.Silanes: Compounds similar to hydrocarbons in which a tetravalent silicon atom replaces the carbon atom. They are very reactive, ignite in air, and form useful derivatives.Bacterial Adhesion: Physicochemical property of fimbriated (FIMBRIAE, BACTERIAL) and non-fimbriated bacteria of attaching to cells, tissue, and nonbiological surfaces. It is a factor in bacterial colonization and pathogenicity.Surgical Tape: A flat, flexible strip of material used to cover or fasten together damaged tissue.Tissue Adhesions: Pathological processes consisting of the union of the opposing surfaces of a wound.Fibronectins: Glycoproteins found on the surfaces of cells, particularly in fibrillar structures. The proteins are lost or reduced when these cells undergo viral or chemical transformation. They are highly susceptible to proteolysis and are substrates for activated blood coagulation factor VIII. The forms present in plasma are called cold-insoluble globulins.Tooth Demineralization: A tooth's loss of minerals, such as calcium in hydroxyapatite from the tooth matrix, caused by acidic exposure. An example of the occurrence of demineralization is in the formation of dental caries.Bicuspid: One of the eight permanent teeth, two on either side in each jaw, between the canines (CUSPID) and the molars (MOLAR), serving for grinding and crushing food. The upper have two cusps (bicuspid) but the lower have one to three. (Jablonski, Dictionary of Dentistry, 1992, p822)Integrins: A family of transmembrane glycoproteins (MEMBRANE GLYCOPROTEINS) consisting of noncovalent heterodimers. They interact with a wide variety of ligands including EXTRACELLULAR MATRIX PROTEINS; COMPLEMENT, and other cells, while their intracellular domains interact with the CYTOSKELETON. The integrins consist of at least three identified families: the cytoadhesin receptors(RECEPTORS, CYTOADHESIN), the leukocyte adhesion receptors (RECEPTORS, LEUKOCYTE ADHESION), and the VERY LATE ANTIGEN RECEPTORS. Each family contains a common beta-subunit (INTEGRIN BETA CHAINS) combined with one or more distinct alpha-subunits (INTEGRIN ALPHA CHAINS). These receptors participate in cell-matrix and cell-cell adhesion in many physiologically important processes, including embryological development; HEMOSTASIS; THROMBOSIS; WOUND HEALING; immune and nonimmune defense mechanisms; and oncogenic transformation.Glass Ionomer Cements: A polymer obtained by reacting polyacrylic acid with a special anion-leachable glass (alumino-silicate). The resulting cement is more durable and tougher than others in that the materials comprising the polymer backbone do not leach out.Water: A clear, odorless, tasteless liquid that is essential for most animal and plant life and is an excellent solvent for many substances. The chemical formula is hydrogen oxide (H2O). (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)Enbucrilate: A tissue adhesive that is applied as a monomer to moist tissue and polymerizes to form a bond. It is slowly biodegradable and used in all kinds of surgery, including dental.Dental Cavity Lining: An inner coating, as of varnish or other protective substance, to cover the dental cavity wall. It is usually a resinous film-forming agent dissolved in a volatile solvent, or a suspension of calcium hydroxide in a solution of a synthetic resin. The lining seals the dentinal tubules and protects the pulp before a restoration is inserted. (Jablonski, Illustrated Dictionary of Dentistry, 1982)Stainless Steel: Stainless steel. A steel containing Ni, Cr, or both. It does not tarnish on exposure and is used in corrosive environments. (Grant & Hack's Chemical Dictionary, 5th ed)Carbon Compounds, Inorganic: Inorganic compounds that contain carbon as an integral part of the molecule but are not derived from hydrocarbons.Friction: Surface resistance to the relative motion of one body against the rubbing, sliding, rolling, or flowing of another with which it is in contact.Lacerations: Torn, ragged, mangled wounds.Cadherins: Calcium-dependent cell adhesion proteins. They are important in the formation of ADHERENS JUNCTIONS between cells. Cadherins are classified by their distinct immunological and tissue specificities, either by letters (E- for epithelial, N- for neural, and P- for placental cadherins) or by numbers (cadherin-12 or N-cadherin 2 for brain-cadherin). Cadherins promote cell adhesion via a homophilic mechanism as in the construction of tissues and of the whole animal body.Cell Aggregation: The phenomenon by which dissociated cells intermixed in vitro tend to group themselves with cells of their own type.Gold Alloys: Alloys that contain a high percentage of gold. They are used in restorative or prosthetic dentistry.Dental Porcelain: A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992)Zirconium: Zirconium. A rather rare metallic element, atomic number 40, atomic weight 91.22, symbol Zr. (From Dorland, 28th ed)Compomers: Composite materials composed of an ion-leachable glass embedded in a polymeric matrix. They differ from GLASS IONOMER CEMENTS in that partially silanized glass particles are used to provide a direct bond to the resin matrix and the matrix is primarily formed by a light-activated, radical polymerization reaction.Curing Lights, Dental: Light sources used to activate polymerization of light-cured DENTAL CEMENTS and DENTAL RESINS. Degree of cure and bond strength depends on exposure time, wavelength, and intensity of the curing light.Silicon Compounds: Inorganic compounds that contain silicon as an integral part of the molecule.Resins, Synthetic: Polymers of high molecular weight which at some stage are capable of being molded and then harden to form useful components.Molar: The most posterior teeth on either side of the jaw, totaling eight in the deciduous dentition (2 on each side, upper and lower), and usually 12 in the permanent dentition (three on each side, upper and lower). They are grinding teeth, having large crowns and broad chewing surfaces. (Jablonski, Dictionary of Dentistry, 1992, p821)Aluminum Silicates: Any of the numerous types of clay which contain varying proportions of Al2O3 and SiO2. They are made synthetically by heating aluminum fluoride at 1000-2000 degrees C with silica and water vapor. (From Hawley's Condensed Chemical Dictionary, 11th ed)Biomimetic Materials: Materials fabricated by BIOMIMETICS techniques, i.e., based on natural processes found in biological systems.Air Abrasion, Dental: A technique using a pneumatic, high-pressure stream of aluminum oxide to remove DENTAL ENAMEL; DENTIN; and restorative materials from teeth. In contrast to using DENTAL HIGH-SPEED EQUIPMENT, this method usually requires no dental anesthesia (ANESTHESIA, DENTAL) and reduces risks of tooth chipping and microfracturing. It is used primarily for routine DENTAL CAVITY PREPARATION.Replica Techniques: Methods of preparing tissue specimens for visualization using an electron microscope, usually a scanning electron microscope. The methods involve the creation of exact copies of the specimens by making a mold or cast (i.e., replica) of the specimen.Platelet Adhesiveness: The process whereby PLATELETS adhere to something other than platelets, e.g., COLLAGEN; BASEMENT MEMBRANE; MICROFIBRILS; or other "foreign" surfaces.Saliva, Artificial: A solution used for irrigating the mouth in xerostomia and as a substitute for saliva.Boron Compounds: Inorganic or organic compounds that contain boron as an integral part of the molecule.Time Factors: Elements of limited time intervals, contributing to particular results or situations.Hardness: The mechanical property of material that determines its resistance to force. HARDNESS TESTS measure this property.Smear Layer: Adherent debris produced when cutting the enamel or dentin in cavity preparation. It is about 1 micron thick and its composition reflects the underlying dentin, although different quantities and qualities of smear layer can be produced by the various instrumentation techniques. Its function is presumed to be protective, as it lowers dentin permeability. However, it masks the underlying dentin and interferes with attempts to bond dental material to the dentin.Mechanical Phenomena: The properties and processes of materials that affect their behavior under force.Cell Movement: The movement of cells from one location to another. Distinguish from CYTOKINESIS which is the process of dividing the CYTOPLASM of a cell.Tooth Preparation: Procedures carried out with regard to the teeth or tooth structures preparatory to specified dental therapeutic and surgical measures.LizardsThrombospondins: A family of related, adhesive glycoproteins which are synthesized, secreted, and incorporated into the extracellular matrix of a variety of cells, including alpha granules of platelets following thrombin activation and endothelial cells. They interact with a number of BLOOD COAGULATION FACTORS and anticoagulant factors. Five distinct forms have been identified, thrombospondin 1, -2, -3, -4, and cartilage oligomeric matrix protein (COMP). They are involved in cell adhesion, platelet aggregation, cell proliferation, angiogenesis, tumor metastasis, VASCULAR SMOOTH MUSCLE growth, and tissue repair.Adhesins, Bacterial: Cell-surface components or appendages of bacteria that facilitate adhesion (BACTERIAL ADHESION) to other cells or to inanimate surfaces. Most fimbriae (FIMBRIAE, BACTERIAL) of gram-negative bacteria function as adhesins, but in many cases it is a minor subunit protein at the tip of the fimbriae that is the actual adhesin. In gram-positive bacteria, a protein or polysaccharide surface layer serves as the specific adhesin. What is sometimes called polymeric adhesin (BIOFILMS) is distinct from protein adhesin.Vitronectin: A blood plasma glycoprotein that mediates cell adhesion and interacts with proteins of the complement, coagulation, and fibrinolytic cascade. (From Segen, Dictionary of Modern Medicine, 1992)Post and Core Technique: Use of a metal casting, usually with a post in the pulp or root canal, designed to support and retain an artificial crown.Denture Retention: The retention of a denture in place by design, device, or adhesion.para-Aminobenzoates: Benzoic acids, salts, or esters that contain an amino group attached to carbon number 4 of the benzene ring structure.Dentinal Fluid: The lymph or fluid of dentin. It is a transudate of extracellular fluid, mainly cytoplasm of odontoblastic processes, from the dental pulp via the dentinal tubules. It is also called dental lymph. (From Stedman, 26th ed, p665)Glass: Hard, amorphous, brittle, inorganic, usually transparent, polymerous silicate of basic oxides, usually potassium or sodium. It is used in the form of hard sheets, vessels, tubing, fibers, ceramics, beads, etc.Dental Enamel Permeability: The property of dental enamel to permit passage of light, heat, gases, liquids, metabolites, mineral ions and other substances. It does not include the penetration of the dental enamel by microorganisms.Platelet Membrane Glycoproteins: Surface glycoproteins on platelets which have a key role in hemostasis and thrombosis such as platelet adhesion and aggregation. Many of these are receptors.Elastic Modulus: Numerical expression indicating the measure of stiffness in a material. It is defined by the ratio of stress in a unit area of substance to the resulting deformation (strain). This allows the behavior of a material under load (such as bone) to be calculated.Analysis of Variance: A statistical technique that isolates and assesses the contributions of categorical independent variables to variation in the mean of a continuous dependent variable.Methylmethacrylate: The methyl ester of methacrylic acid. It polymerizes easily to form POLYMETHYL METHACRYLATE. It is used as a bone cement.Polymethyl Methacrylate: Polymerized methyl methacrylate monomers which are used as sheets, moulding, extrusion powders, surface coating resins, emulsion polymers, fibers, inks, and films (From International Labor Organization, 1983). This material is also used in tooth implants, bone cements, and hard corneal contact lenses.Fimbriae, Bacterial: Thin, hairlike appendages, 1 to 20 microns in length and often occurring in large numbers, present on the cells of gram-negative bacteria, particularly Enterobacteriaceae and Neisseria. Unlike flagella, they do not possess motility, but being protein (pilin) in nature, they possess antigenic and hemagglutinating properties. They are of medical importance because some fimbriae mediate the attachment of bacteria to cells via adhesins (ADHESINS, BACTERIAL). Bacterial fimbriae refer to common pili, to be distinguished from the preferred use of "pili", which is confined to sex pili (PILI, SEX).Cells, Cultured: Cells propagated in vitro in special media conducive to their growth. Cultured cells are used to study developmental, morphologic, metabolic, physiologic, and genetic processes, among others.Bivalvia: A class in the phylum MOLLUSCA comprised of mussels; clams; OYSTERS; COCKLES; and SCALLOPS. They are characterized by a bilaterally symmetrical hinged shell and a muscular foot used for burrowing and anchoring.Molecular Sequence Data: Descriptions of specific amino acid, carbohydrate, or nucleotide sequences which have appeared in the published literature and/or are deposited in and maintained by databanks such as GENBANK, European Molecular Biology Laboratory (EMBL), National Biomedical Research Foundation (NBRF), or other sequence repositories.Statistics, Nonparametric: A class of statistical methods applicable to a large set of probability distributions used to test for correlation, location, independence, etc. In most nonparametric statistical tests, the original scores or observations are replaced by another variable containing less information. An important class of nonparametric tests employs the ordinal properties of the data. Another class of tests uses information about whether an observation is above or below some fixed value such as the median, and a third class is based on the frequency of the occurrence of runs in the data. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed, p1284; Corsini, Concise Encyclopedia of Psychology, 1987, p764-5)Dental Pulp Capping: Application of a protective agent to an exposed pulp (direct capping) or the remaining thin layer of dentin over a nearly exposed pulp (indirect capping) in order to allow the pulp to recover and maintain its normal vitality and function.Extracellular Matrix: A meshwork-like substance found within the extracellular space and in association with the basement membrane of the cell surface. It promotes cellular proliferation and provides a supporting structure to which cells or cell lysates in culture dishes adhere.Microscopy, Atomic Force: A type of scanning probe microscopy in which a probe systematically rides across the surface of a sample being scanned in a raster pattern. The vertical position is recorded as a spring attached to the probe rises and falls in response to peaks and valleys on the surface. These deflections produce a topographic map of the sample.Aluminum Oxide: An oxide of aluminum, occurring in nature as various minerals such as bauxite, corundum, etc. It is used as an adsorbent, desiccating agent, and catalyst, and in the manufacture of dental cements and refractories.Biocompatible Materials: Synthetic or natural materials, other than DRUGS, that are used to replace or repair any body TISSUES or bodily function.Adhesins, Escherichia coli: Thin, filamentous protein structures, including proteinaceous capsular antigens (fimbrial antigens), that mediate adhesion of E. coli to surfaces and play a role in pathogenesis. They have a high affinity for various epithelial cells.Ceramics: Products made by baking or firing nonmetallic minerals (clay and similar materials). In making dental restorations or parts of restorations the material is fused porcelain. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed & Boucher's Clinical Dental Terminology, 4th ed)Arachnoiditis: Acute or chronic inflammation of the arachnoid membrane of the meninges most often involving the spinal cord or base of the brain. This term generally refers to a persistent inflammatory process characterized by thickening of the ARACHNOID membrane and dural adhesions. Associated conditions include prior surgery, infections, trauma, SUBARACHNOID HEMORRHAGE, and chemical irritation. Clinical features vary with the site of inflammation, but include cranial neuropathies, radiculopathies, and myelopathies. (From Joynt, Clinical Neurology, 1997, Ch48, p25)Amino Acid Sequence: The order of amino acids as they occur in a polypeptide chain. This is referred to as the primary structure of proteins. It is of fundamental importance in determining PROTEIN CONFORMATION.Polyethylene Glycols: Polymers of ETHYLENE OXIDE and water, and their ethers. They vary in consistency from liquid to solid depending on the molecular weight indicated by a number following the name. They are used as SURFACTANTS, dispersing agents, solvents, ointment and suppository bases, vehicles, and tablet excipients. Some specific groups are NONOXYNOLS, OCTOXYNOLS, and POLOXAMERS.Silorane Resins: Polymeric resins containing a combination of SILOXANES and OXIRANES.Silver Staining: The use of silver, usually silver nitrate, as a reagent for producing contrast or coloration in tissue specimens.Bandages: Material used for wrapping or binding any part of the body.Equipment Reuse: Further or repeated use of equipment, instruments, devices, or materials. It includes additional use regardless of the original intent of the producer as to disposability or durability. It does not include the repeated use of fluids or solutions.Dentin, Secondary: Dentin formed by normal pulp after completion of root end formation.Technology, Dental: The field of dentistry involved in procedures for designing and constructing dental appliances. It includes also the application of any technology to the field of dentistry.Camphor: A bicyclic monoterpene ketone found widely in plants, especially CINNAMOMUM CAMPHORA. It is used topically as a skin antipruritic and as an anti-infective agent.Spectrum Analysis, Raman: Analysis of the intensity of Raman scattering of monochromatic light as a function of frequency of the scattered light.Intestinal Obstruction: Any impairment, arrest, or reversal of the normal flow of INTESTINAL CONTENTS toward the ANAL CANAL.Tooth Fractures: Break or rupture of a tooth or tooth root.Fibrinogen: Plasma glycoprotein clotted by thrombin, composed of a dimer of three non-identical pairs of polypeptide chains (alpha, beta, gamma) held together by disulfide bonds. Fibrinogen clotting is a sol-gel change involving complex molecular arrangements: whereas fibrinogen is cleaved by thrombin to form polypeptides A and B, the proteolytic action of other enzymes yields different fibrinogen degradation products.Photochemical Processes: Chemical reactions effected by light.Dental Prosthesis Retention: Holding a DENTAL PROSTHESIS in place by its design, or by the use of additional devices or adhesives.Temperature: The property of objects that determines the direction of heat flow when they are placed in direct thermal contact. The temperature is the energy of microscopic motions (vibrational and translational) of the particles of atoms.Polycarboxylate Cement: Water-soluble low-molecular-weight polymers of acrylic or methacrylic acid that form solid, insoluble products when mixed with specially prepared ZnO powder. The resulting cement adheres to dental enamel and is also used as a luting agent.von Willebrand Factor: A high-molecular-weight plasma protein, produced by endothelial cells and megakaryocytes, that is part of the factor VIII/von Willebrand factor complex. The von Willebrand factor has receptors for collagen, platelets, and ristocetin activity as well as the immunologically distinct antigenic determinants. It functions in adhesion of platelets to collagen and hemostatic plug formation. The prolonged bleeding time in VON WILLEBRAND DISEASES is due to the deficiency of this factor.Cattle: Domesticated bovine animals of the genus Bos, usually kept on a farm or ranch and used for the production of meat or dairy products or for heavy labor.Molar, Third: The aftermost permanent tooth on each side in the maxilla and mandible.Cariostatic Agents: Substances that inhibit or arrest DENTAL CARIES formation. (Boucher's Clinical Dental Terminology, 4th ed)Silicon Dioxide: Transparent, tasteless crystals found in nature as agate, amethyst, chalcedony, cristobalite, flint, sand, QUARTZ, and tridymite. The compound is insoluble in water or acids except hydrofluoric acid.PolyvinylsLaminin: Large, noncollagenous glycoprotein with antigenic properties. It is localized in the basement membrane lamina lucida and functions to bind epithelial cells to the basement membrane. Evidence suggests that the protein plays a role in tumor invasion.Desmogleins: A group of desmosomal cadherins with cytoplasmic tails that resemble those of classical CADHERINS.Silver: Silver. An element with the atomic symbol Ag, atomic number 47, and atomic weight 107.87. It is a soft metal that is used medically in surgical instruments, dental prostheses, and alloys. Long-continued use of silver salts can lead to a form of poisoning known as ARGYRIA.Acetone: A colorless liquid used as a solvent and an antiseptic. It is one of the ketone bodies produced during ketoacidosis.Desmosomes: A type of junction that attaches one cell to its neighbor. One of a number of differentiated regions which occur, for example, where the cytoplasmic membranes of adjacent epithelial cells are closely apposed. It consists of a circular region of each membrane together with associated intracellular microfilaments and an intercellular material which may include, for example, mucopolysaccharides. (From Glick, Glossary of Biochemistry and Molecular Biology, 1990; Singleton & Sainsbury, Dictionary of Microbiology and Molecular Biology, 2d ed)Sutures: Materials used in closing a surgical or traumatic wound. (From Dorland, 28th ed)Hydrophobic and Hydrophilic Interactions: The thermodynamic interaction between a substance and WATER.Dental Pulp: A richly vascularized and innervated connective tissue of mesodermal origin, contained in the central cavity of a tooth and delimited by the dentin, and having formative, nutritive, sensory, and protective functions. (Jablonski, Dictionary of Dentistry, 1992)Tooth, Deciduous: The teeth of the first dentition, which are shed and replaced by the permanent teeth.Decalcification Technique: Removal of minerals from bones during bone examination.Protein Binding: The process in which substances, either endogenous or exogenous, bind to proteins, peptides, enzymes, protein precursors, or allied compounds. Specific protein-binding measures are often used as assays in diagnostic assessments.Hydrogels: Water swollen, rigid, 3-dimensional network of cross-linked, hydrophilic macromolecules, 20-95% water. They are used in paints, printing inks, foodstuffs, pharmaceuticals, and cosmetics. (Grant & Hackh's Chemical Dictionary, 5th ed)Antigens, CD29: Integrin beta-1 chains which are expressed as heterodimers that are noncovalently associated with specific alpha-chains of the CD49 family (CD49a-f). CD29 is expressed on resting and activated leukocytes and is a marker for all of the very late activation antigens on cells. (from: Barclay et al., The Leukocyte Antigen FactsBook, 1993, p164)Blood Platelets: Non-nucleated disk-shaped cells formed in the megakaryocyte and found in the blood of all mammals. They are mainly involved in blood coagulation.Oligopeptides: Peptides composed of between two and twelve amino acids.AcrylatesTooth, Artificial: A fabricated tooth substituting for a natural tooth in a prosthesis. It is usually made of porcelain or plastic.Occlusive Dressings: Material, usually gauze or absorbent cotton, used to cover and protect wounds, to seal them from contact with air or bacteria. (From Dorland, 27th ed)Ammonium Compounds: Inorganic compounds that include a positively charged tetrahedral nitrogen (ammonium ion) as part of their structure. This class of compounds includes a broad variety of simple ammonium salts and derivatives.Polymers: Compounds formed by the joining of smaller, usually repeating, units linked by covalent bonds. These compounds often form large macromolecules (e.g., BIOPOLYMERS; PLASTICS).Antigens, CD18: Cell-surface glycoprotein beta-chains that are non-covalently linked to specific alpha-chains of the CD11 family of leukocyte-adhesion molecules (RECEPTORS, LEUKOCYTE-ADHESION). A defect in the gene encoding CD18 causes LEUKOCYTE-ADHESION DEFICIENCY SYNDROME.Yttrium: An element of the rare earth family of metals. It has the atomic symbol Y, atomic number 39, and atomic weight 88.91. In conjunction with other rare earths, yttrium is used as a phosphor in television receivers and is a component of the yttrium-aluminum garnet (YAG) lasers.Incisor: Any of the eight frontal teeth (four maxillary and four mandibular) having a sharp incisal edge for cutting food and a single root, which occurs in man both as a deciduous and a permanent tooth. (Jablonski, Dictionary of Dentistry, 1992, p820)Tricarboxylic Acids: Organic compounds that are acyclic and contain three acid groups. A member of this class is citric acid which is the first product formed by reaction of pyruvate and oxaloacetate. (From Lehninger, Principles of Biochemistry, 1982, p443)Cytoskeleton: The network of filaments, tubules, and interconnecting filamentous bridges which give shape, structure, and organization to the cytoplasm.Mechanics: The branch of physics which deals with the motions of material bodies, including kinematics, dynamics, and statics. When the laws of mechanics are applied to living structures, as to the locomotor system, it is referred to as BIOMECHANICAL PHENOMENA. (From Dorland, 28th ed)Selectins: Transmembrane proteins consisting of a lectin-like domain, an epidermal growth factor-like domain, and a variable number of domains that are homologous to complement regulatory proteins. They are important cell adhesion molecules which help LEUKOCYTES attach to VASCULAR ENDOTHELIUM.Receptors, Cytoadhesin: A group of INTEGRINS that includes the platelet outer membrane glycoprotein GPIIb-IIIa (PLATELET GLYCOPROTEIN GPIIB-IIIA COMPLEX) and the vitronectin receptor (RECEPTORS, VITRONECTIN). They play a major role in cell adhesion and serve as receptors for fibronectin, von Willebrand factor, and vitronectin.Tooth Cervix: The constricted part of the tooth at the junction of the crown and root or roots. It is often referred to as the cementoenamel junction (CEJ), the line at which the cementum covering the root of a tooth and the enamel of the tooth meet. (Jablonski, Dictionary of Dentistry, 1992, p530, p433)Collagen: A polypeptide substance comprising about one third of the total protein in mammalian organisms. It is the main constituent of SKIN; CONNECTIVE TISSUE; and the organic substance of bones (BONE AND BONES) and teeth (TOOTH).Biomimetics: An interdisciplinary field in materials science, ENGINEERING, and BIOLOGY, studying the use of biological principles for synthesis or fabrication of BIOMIMETIC MATERIALS.Self-Curing of Dental Resins: The hardening or polymerization of bonding agents (DENTAL CEMENTS) via chemical reactions, usually involving two components. This type of dental bonding uses a self-cure or dual-cure system.Maxillofacial Prosthesis: A prosthetic appliance for the replacement of areas of the maxilla, mandible, and face, missing as a result of deformity, disease, injury, or surgery. When the prosthesis replaces portions of the mandible only, it is referred to as MANDIBULAR PROSTHESIS.Fimbriae Proteins: Proteins that are structural components of bacterial fimbriae (FIMBRIAE, BACTERIAL) or sex pili (PILI, SEX).Crowns: A prosthetic restoration that reproduces the entire surface anatomy of the visible natural crown of a tooth. It may be partial (covering three or more surfaces of a tooth) or complete (covering all surfaces). It is made of gold or other metal, porcelain, or resin.Hydrofluoric Acid: Hydrofluoric acid. A solution of hydrogen fluoride in water. It is a colorless fuming liquid which can cause painful burns.Coated Materials, Biocompatible: Biocompatible materials usually used in dental and bone implants that enhance biologic fixation, thereby increasing the bond strength between the coated material and bone, and minimize possible biological effects that may result from the implant itself.Desmoplakins: Desmoplakins are cytoskeletal linker proteins that anchor INTERMEDIATE FILAMENTS to the PLASMA MEMBRANE at DESMOSOMES.Phosphines: Inorganic or organic compounds derived from phosphine (PH3) by the replacement of H atoms. (From Grant & Hackh's Chemical Dictionary, 5th ed)Lymphocyte Function-Associated Antigen-1: An integrin heterodimer widely expressed on cells of hematopoietic origin. CD11A ANTIGEN comprises the alpha chain and the CD18 antigen (ANTIGENS, CD18) the beta chain. Lymphocyte function-associated antigen-1 is a major receptor of T-CELLS; B-CELLS; and GRANULOCYTES. It mediates the leukocyte adhesion reactions underlying cytolytic conjugate formation, helper T-cell interactions, and antibody-dependent killing by NATURAL KILLER CELLS and granulocytes. Intracellular adhesion molecule-1 has been defined as a ligand for lymphocyte function-associated antigen-1.Polystyrenes: Polymerized forms of styrene used as a biocompatible material, especially in dentistry. They are thermoplastic and are used as insulators, for injection molding and casting, as sheets, plates, rods, rigid forms and beads.Siloxanes: Silicon polymers that contain alternate silicon and oxygen atoms in linear or cyclic molecular structures.Hemagglutination: The aggregation of ERYTHROCYTES by AGGLUTININS, including antibodies, lectins, and viral proteins (HEMAGGLUTINATION, VIRAL).Cell Line: Established cell cultures that have the potential to propagate indefinitely.Endothelium, Vascular: Single pavement layer of cells which line the luminal surface of the entire vascular system and regulate the transport of macromolecules and blood components.Leukocyte Rolling: Movement of tethered, spherical LEUKOCYTES along the endothelial surface of the microvasculature. The tethering and rolling involves interaction with SELECTINS and other adhesion molecules in both the ENDOTHELIUM and leukocyte. The rolling leukocyte then becomes activated by CHEMOKINES, flattens out, and firmly adheres to the endothelial surface in preparation for transmigration through the interendothelial cell junction. (From Abbas, Cellular and Molecular Immunology, 3rd ed)Integrin alpha4beta1: Integrin alpha4beta1 is a FIBRONECTIN and VCAM-1 receptor present on LYMPHOCYTES; MONOCYTES; EOSINOPHILS; NK CELLS and thymocytes. It is involved in both cell-cell and cell- EXTRACELLULAR MATRIX adhesion and plays a role in INFLAMMATION, hematopoietic cell homing and immune function, and has been implicated in skeletal MYOGENESIS; NEURAL CREST migration and proliferation, lymphocyte maturation and morphogenesis of the PLACENTA and HEART.Microscopy, Interference: The science and application of a double-beam transmission interference microscope in which the illuminating light beam is split into two paths. One beam passes through the specimen while the other beam reflects off a reference mirror before joining and interfering with the other. The observed optical path difference between the two beams can be measured and used to discriminate minute differences in thickness and refraction of non-stained transparent specimens, such as living cells in culture.Denture, Partial, Fixed, Resin-Bonded: A commonly used prosthesis that results in a strong, permanent restoration. It consists of an electrolytically etched cast-metal retainer that is cemented (bonded), using resins, to adjacent teeth whose enamel was previously acid-treated (acid-etched). This type of bridgework is sometimes referred to as a Maryland bridge.Orthodontic Retainers: Orthodontic appliances, fixed or removable, used to maintain teeth in corrected positions during the period of functional adaptation following corrective treatment. These appliances are also used to maintain the positions of the teeth and jaws gained by orthodontic procedures. (From Zwemer, Boucher's Clinical Dental Terminology, 4th ed, p263)alpha Catenin: A catenin that binds F-ACTIN and links the CYTOSKELETON with BETA CATENIN and GAMMA CATENIN.Chlorhexidine: A disinfectant and topical anti-infective agent used also as mouthwash to prevent oral plaque.Biomechanical Phenomena: The properties, processes, and behavior of biological systems under the action of mechanical forces.Adherens Junctions: Anchoring points where the CYTOSKELETON of neighboring cells are connected to each other. They are composed of specialized areas of the plasma membrane where bundles of the ACTIN CYTOSKELETON attach to the membrane through the transmembrane linkers, CADHERINS, which in turn attach through their extracellular domains to cadherins in the neighboring cell membranes. In sheets of cells, they form into adhesion belts (zonula adherens) that go all the way around a cell.Cell Communication: Any of several ways in which living cells of an organism communicate with one another, whether by direct contact between cells or by means of chemical signals carried by neurotransmitter substances, hormones, and cyclic AMP.Receptors, Fibronectin: Specific cell surface receptors which bind to FIBRONECTINS. Studies have shown that these receptors function in certain types of adhesive contact as well as playing a major role in matrix assembly. These receptors include the traditional fibronectin receptor, also called INTEGRIN ALPHA5BETA1 and several other integrins.Elasticity: Resistance and recovery from distortion of shape.Dental Prophylaxis: Treatment for the prevention of periodontal diseases or other dental diseases by the cleaning of the teeth in the dental office using the procedures of DENTAL SCALING and DENTAL POLISHING. The treatment may include plaque detection, removal of supra- and subgingival plaque and calculus, application of caries-preventing agents, checking of restorations and prostheses and correcting overhanging margins and proximal contours of restorations, and checking for signs of food impaction.Extracellular Matrix Proteins: Macromolecular organic compounds that contain carbon, hydrogen, oxygen, nitrogen, and usually, sulfur. These macromolecules (proteins) form an intricate meshwork in which cells are embedded to construct tissues. Variations in the relative types of macromolecules and their organization determine the type of extracellular matrix, each adapted to the functional requirements of the tissue. The two main classes of macromolecules that form the extracellular matrix are: glycosaminoglycans, usually linked to proteins (proteoglycans), and fibrous proteins (e.g., COLLAGEN; ELASTIN; FIBRONECTINS; and LAMININ).Fluorides: Inorganic salts of hydrofluoric acid, HF, in which the fluorine atom is in the -1 oxidation state. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed) Sodium and stannous salts are commonly used in dentifrices.Dental Polishing: Creation of a smooth and glossy surface finish on a denture or amalgam.Rheology: The study of the deformation and flow of matter, usually liquids or fluids, and of the plastic flow of solids. The concept covers consistency, dilatancy, liquefaction, resistance to flow, shearing, thixotrophy, and VISCOSITY.Receptors, Vitronectin: Receptors such as INTEGRIN ALPHAVBETA3 that bind VITRONECTIN with high affinity and play a role in cell migration. They also bind FIBRINOGEN; VON WILLEBRAND FACTOR; osteopontin; and THROMBOSPONDINS.Focal Adhesions: An anchoring junction of the cell to a non-cellular substrate. It is composed of a specialized area of the plasma membrane where bundles of the ACTIN CYTOSKELETON terminate and attach to the transmembrane linkers, INTEGRINS, which in turn attach through their extracellular domains to EXTRACELLULAR MATRIX PROTEINS.Glutaral: One of the protein CROSS-LINKING REAGENTS that is used as a disinfectant for sterilization of heat-sensitive equipment and as a laboratory reagent, especially as a fixative.Mytilus edulis: A species of mussel in the genus MYTILUS, family MYTILIDAE, class BIVALVIA, known as the common mussel. It has a bluish-black shell and is highly edible.Antibodies, Monoclonal: Antibodies produced by a single clone of cells.

Fluorimetric multiparameter cell assay at the single cell level fabricated by optical tweezers. (1/328)

A fluorimetric multi-parameter cell sensor at the single cell level is presented which makes it possible to observe the physiological behavior of different cell lines, different physiological parameters, and statistical data at the same time. Different cell types were immobilized at predefined positions with high accuracy using optical tweezers and adhesion promoting surface layers. The process is applicable to both adherent and non-adherent cells. Coating of the immobilization area with mussel adhesive protein was shown to be essential for the process. Intracellular proton and calcium concentrations in different cell classes were simultaneously imaged and the specific activation of T lymphocytes was demonstrated. This method should be especially useful for drug screening due to the small sample volume and high information density.  (+info)

In vitro comparison of the retention capacity of new aesthetic brackets. (2/328)

Tensile bond strength and bond failure location were evaluated in vitro for two types of aesthetic brackets (non-silanated ceramic, polycarbonate) and one stainless steel bracket, using bovine teeth as the substrate and diacrylate resin as the adhesive. The results show that metallic bracket had the highest bond strength (13.21 N) followed by the new plastic bracket (12.01 N), which does not require the use of a primer. The non-silanated ceramic bracket produced the lowest bond strength (8.88 N). Bond failures occurred mainly between bracket and cement, although a small percentage occurred between the enamel-cement interface with the metal and plastic brackets and within the cement for the plastic bracket. With the ceramic bracket all the failures occurred at the bracket-cement interface. This suggests that the problems of enamel lesions produced by this type of bracket may have been eliminated. The results also show that the enamel/adhesive bond is stronger than the adhesive/bracket bond in this in vitro study.  (+info)

Autoclaving impairs the connector-tube bond of the laryngeal mask airway but not its airtightness. (3/328)

The general-purpose laryngeal mask airway (LMA) is re-usable when undamaged, and cleaned and autoclaved correctly. We had found weakening of the silicone adhesive that bonds the connector of the LMA to the tube. We report that repeated autoclaving damaged the adhesive such that the connector could be rotated in the tube after the 12th autoclave cycle in almost all of the LMA tested. The damage to the adhesive did not affect the airtightness of the junction, which appears to be maintained by the material properties of the connector and tube and by the shape of the join.  (+info)

Abnormal liver function tests following inadvertent inhalation of volatile hydrocarbons. (4/328)

The use of aerosols containing volatile hydrocarbons in conditions of poor ventilation can result in accidental overexposure which can cause central nervous system effects and hepatic injury. We present a case in which inadvertent usage of an adhesive spray used to make greeting cards resulted in vague neurological symptoms and abnormal liver function tests both of which fully resolved on discontinuation.  (+info)

A laboratory investigation to compare enamel preparation by sandblasting or acid etching prior to bracket bonding. (5/328)

A laboratory investigation to compare the mean shear debonding force and mode of bond failure of metallic brackets bonded to sandblasted and acid-etched enamel is described. The buccal surfaces of 30 extracted human premolars were sandblasted for 5 seconds with 50 mu alumina and the buccal surfaces of a further 30 human premolars were etched with 37 per cent phosphoric acid for 15 seconds. Following storage for 24 hours at 37 degrees C in distilled water, shear debonding force was measured using an Instron Universal Testing Machine with a cross-head speed of 10 mm/minute. Mean shear debonding force was significantly lower for brackets bonded to sandblasted enamel compared to acid etched enamel (P < 0.001). Weibull analysis showed that at a given stress the probability of failure was significantly greater for brackets bonded to sandblasted enamel. Brackets bonded to etched enamel showed a mixed mode of bond failure whereas following sandblasting, failure was adhesive at the enamel/composite interface (P < 0.01).  (+info)

Factors affecting the shear bond strength of orthodontic brackets to porcelain. (6/328)

The aim of this investigation was to establish a regime for orthodontic bonding to feldspathic porcelain, which ensures adequate bond strength (6-8 MPa) with minimal damage on debond and consisted of an ex vivo investigation measuring the effects of porcelain surface preparation and thermocycling on shear bond strength of orthodontic brackets. One-hundred-and-twenty feldspathic porcelain bonded crown surfaces were divided into 12 equally-sized groups to assess the effects of: (1) glaze removal, (2) application of hydrofluoric acid, phosphoric acid, or omission of acid treatment, and (3) silane priming upon the bond strength of premolar brackets bonded with Right-on (TM) composite resin adhesive. Specimens were subjected to thermocycling and then to shear debonding forces on an Instron machine. Removal of the porcelain glaze, or use of hydrofluoric acid, prior to bonding were found to be unnecessary to secure the target bond strength. Hydrofluoric acid application was associated with increased porcelain surface damage. Thermocycling caused a significant reduction in shear bond strength to porcelain (P < 0*001). The best regime for orthodontic bonding to feldspathic porcelain was to apply phosphoric acid for 60 seconds, and prime with silane prior to bonding. Usually the porcelain surfaces could be repolished. Refereed Paper  (+info)

Differentiation of mucilage secretory cells of the Arabidopsis seed coat. (7/328)

In some plant species, including Arabidopsis, fertilization induces the epidermal cells of the outer ovule integument to differentiate into a specialized seed coat cell type with a unique morphology and containing large quantities of polysaccharide mucilage (pectin). Such seed coat mucilage cells are necessary for neither viability nor germination under normal laboratory conditions. Thus, the Arabidopsis seed coat offers a unique system with which to use genetics to identify genes controlling cell morphogenesis and complex polysaccharide biosynthesis and secretion. As a first step in the application of this system, we have used microscopy to investigate the structure and differentiation of Arabidopsis seed coat mucilage cells, including cell morphogenesis and the synthesis, secretion, and extrusion of mucilage. During seed coat development in Arabidopsis, the epidermal cells of the outer ovule integument grow and differentiate into cells that produce large quantities of mucilage between the primary cell wall and plasma membrane. Concurrent with mucilage production, the cytoplasm is shaped into a column in the center of the cell. Following mucilage secretion the cytoplasmic column is surrounded by a secondary cell wall to form a structure known as the columella. Thus, differentiation of the seed coat mucilage cells involves a highly regulated series of events including growth, morphogenesis, mucilage biosynthesis and secretion, and secondary cell wall synthesis.  (+info)

1H-NMR studies of the interaction of dental adhesive monomer, 4-META with calcium. (8/328)

Our objective was to determine whether high-resolution proton-nuclear magnetic resonance (500 MHz) could be utilized for detection of ionic binding interaction of the 4-META resin system with calcium derived from hydroxyapatite. The stability of 4-META in aqueous medium was studied, findings indicated that 4-META was rapidly converted to 4-MET, a hydrate product of 4-META in 10% D2O/DMSO-d6. The 1H-NMR signals of the methacryloyloxyethoxy group of 4-MET remained intact following the addition of both monocalcium phosphate (MCP) and dicalcium phosphate dihydrate (brushite) solution, whereas those of its trimellitic portion were markedly shifted upfield depending on the phosphate concentration. The shielding effect followed by upfield shifts was due to the localization of electron density surrounding the carboxylate anions that were dissociated by the interaction with calcium counter cation. The shielding effect of 4-MET with brushite was larger than that with MCP. An ionic interaction of 4-MET derived from 4-META with calcium was demonstrated.  (+info)

PROBLEM TO BE SOLVED: To provide a film which does not use an expensive pressure-sensitive adhesive, exhibits pressure-sensitive self-adhesiveness, has good pressure-sensitive adhesive strength to another film, can easily attain an arbitrary pressure- sensitive adhesiveness, shows good blocking property, and is desirable as a pressure-sensitive adhesive layer of, especially, a pallet stretch film. SOLUTION: The pressure-sensitive adhesive film is a polyethylene resin having a density of 0.884-0.910 g/cm|3| and obtained by blending (A) a linear low-density polyethylene component having an MFR of 0.1-10 g/10 min and a density of 0.890-0.940 g/cm|3| or a polyethylene composition prepared by mixing component A with a component (B) having an MFR of 0.1-50 g/10 min and an extrapolated final melting temperature in the melting peak of 98 deg.C (as measured by differential scanning calorimetry).
This invention relates to a moisture-vapor-permeable pressure-sensitive adhesive material for use on animal skin and nails, e.g. a surgical drape, suture strip or sheet, adhesive dressing, bandage, plaster, strapping tape, decorative nail covering, or decorative cosmetic product. The adhesive material comprises a backing material and a pressure-sensitive adhesive on at least substantially the whole of the body adhering portion of at least one surface of said backing material, both said backing material and said adhesive being moisture-vapor-permeable and unaffected by water and at least one of said backing material and said adhesive comprising a synthetic polymer and .Iadd.both said backing material and said adhesive .Iaddend.being continuous and nonpermeable to liquid water, said adhesive material having a moisture vapor permeability of at least 300 g/sq. meter/24 hours/40 C./80 percent RH.
0085]When a layer made from an ultraviolet curing-type pressure-sensitive adhesive that is cured by an ultraviolet in advance is adopted as the pressure-sensitive adhesive layer 14, the layer is formed as follows. That is, the pressure-sensitive adhesive layer is formed by forming a coating film by applying an ultraviolet curing-type pressure-sensitive adhesive composition onto the base material 13 and then drying the coating film (crosslinking by heating as necessary) under a prescribed condition. The coating method, the coating condition, and the drying condition can be the same as above. Further, the pressure-sensitive adhesive layer may be formed by forming a coating film by applying the ultraviolet curing-type pressure-sensitive adhesive composition onto the first separator 21 and then drying the coating film under the above-described drying condition. After that, the pressure-sensitive adhesive layer is transferred onto the base material 13. Further, the pressure-sensitive adhesive layer ...
0010] Inventors of the present invention conducted intensive studies on an inorganic filler and a resin composition in order to provide an adhesive material having sufficient adhesiveness and sufficient heat resistance. As a result, the inventors found that a layered clay mineral dispersed in an adhesive agent does not undergo complete interlayer separation, but the layered clay mineral is dispersed in the adhesive agent with its layers being in a stacked state. Therefore, the resulting adhesive composition suffers from variations in physical properties. Further, the inventors found that, where an adhesive tape is produced by using the adhesive composition, stress is liable to be concentrated on peripheries of particles of the layered clay mineral in the adhesive agent during peel-off of the adhesive tape, resulting in cohesive failure of the adhesive agent. As a result of further studies, the inventors found that, where an organophilic layered double hydroxide (B) organically treated with an ...
The present invention includes: an adhesive material attaching process for attaching a wafer to a thermoseffing adhesive material provided on a base film; a dicing-film attaching process for attaching the base film to a dicing film; an IC-chip separating process for cutting the wafer and the thermosetting adhesive material to divide them into IC chips; and a mounting process for attaching, to a carrier, the IC chips having the thermosetting adhesive material attached thereto; wherein the thermosetting adhesive material has a viscosity of 20000 Pa s or less at the attaching temperature during the adhesive material attaching process.
The present invention provides pressure-sensitive adhesives having a refractive index of at least 1.50. The pressure-sensitive adhesives comprise at least one monomer containing a substituted or an unsubstituted biphenyl group.
The present invention provides pressure-sensitive adhesives having a refractive index of at least 1.50. The pressure-sensitive adhesives comprise at least one monomer containing a substituted or an unsubstituted biphenyl group.
A heat-activatable, pressure-sensitive adhesive tape or sheet in which the pressure-sensitive, bonding function arises on heating, which comprises a backing material having thereon a layer of a heat-activatable, pressure-sensitve adhesive having an apparent modulus of elasticity of about 10 to 300 kg/cm.sup.2 at normal temperature, the adhesive comprising a mixture of(a) 100 parts by weight of a copolymer of (i) an alkyl acrylate ester or an alkyl methacrylate ester and (ii) a polymerizable monomer having a functional group, and(b) about 50 to 200 parts by weight of a reactive hot-melt resin that is miscible with the copolymer (a), has a melting point of about C. or higher, and has at least one functional group capable of reacting with the functional group of the copolymer (a), either directly or through a crosslinking agent.
The invention is directed to an improvement in a process for preparing an aqueous emulsion of pressure-sensitive adhesive based upon acrylic esters having a good balance of adhesive and cohesive properties and to the resulting emulsion. In the basic process, a pressure-sensitive adhesive formulation comprised of at least one ester of acrylic or methacrylic acid is polymerized in the presence of water and an emulsifier thereby forming an emulsion polymerized pressure-sensitive adhesive. The improvement resides in effecting the polymerization of the pressure-sensitive adhesive formulation comprised of at least one ester of acrylic or methacrylic acid in the presence of from 5 to 30 percent by weight of a styrene containing polymer containing at least 80 percent by weight styrene.
The invention provides pressure-sensitive adhesive (PSA) compositions comprising a graft copolymer of one or more of ethylene and C3 -C18 α-olefins and one or more of a new class of macromonomers. The adhesive composition comprises a blend of the graft copolymer with a tackifying resin. Sheet materials can be coated with layers of the adhesive composition to provide tapes and laminates.
Scientists have copied the natural glue secreted by a tiny sea creature called the sandcastle worm in an effort to develop a long-sought medical adhesive needed to repair bones shattered in battlefield injuries, car crashes and other accidents. They reported on the adhesive here today at the 238th National Meeting of the American Chemical Society.
For years, pressure-sensitive adhesives (PSAs) have been creating new opportunities for improved production processes in the automotive and transportation markets. According to the Adhesive and Sealant Council Inc., one of the first uses of acrylic PSA tapes in the automotive market came about in the 1960s as a solution for replacing mechanical fasteners to attach vehicle trim, thus improving corrosion resistance.* In the decade that followed, the association notes that acrylic adhesives were being used instead of mechanical fasteners in wire tacking, allowing for fewer . . .
The present invention provides an acrylate/silicone pressure-sensitive adhesive tape having a foam backing having improved adhesion to painted surfaces and low temperature performance.
Impact-modified adhesives | Ultraviolet cured (meth)acrylate pressure-sensitive adhesive composition and process for producing thereof | Crosslinkable and crosslinked compositions | Waterborne adhesives | Adhesive composition and masking article for producing precise paint lines |
Pressure-sensitive adhesives (PSAs) have become more popular in demanding tape and label applications. Many high-performance PSA applications are dominated by solvent acrylic PSAs and radiation-curable PSAs because they can achieve much higher cohesive strength and heat resistance than other technologies, including typical emulsion PSAs. Due to these performance limitations, waterborne emulsion PSAs are used in less demanding applications. Waterborne acrylic PSAs provide many advantages such as high solids, lower cost, low hazard, and environmental benefits. With these advantages, industry has been pushing the limits of . . .
|p|Packaging tape conforms to box surface for a consistent, uniform seal with no water or sticky cleanup. Resists center seam splitting and seals out moisture, dust and dirt. Made of 1.2 mil polypropylene film tape. Pressure-sensitive adhesive offers good
Complex coacervation of two oppositely charged polysaccharides, namely a lactose-modified chitosan (CTL) and hyaluronan (HA), was investigated in this study. Coacervates of the two polysaccharides were prepared by drop-by-drop injection of HA into CTL. Transmittance and dynamic light scattering (DLS) measurements in combination with TEM analyses demonstrated the formation of spheroidal colloids in the nano-/microsize range showing good homogeneity. Strikingly, the presence of 150 mM supporting NaCl did not hamper the colloid formation. Stability studies on selected formulations demonstrated that HA/CTL coacervates were stable up to 3 weeks at 37 °C and behaved as pH-responsive colloids since transition from entangled to disentangled chains was attained for a proper pH range. The possibility of freeze-drying the coacervates for storage purposes and the ability of encapsulating selected payloads were investigated as well, for two values of the fraction of the lactitol side-chain substitution ...
The present invention relates to an adhesive agent which can be used in the mounting of a semiconductor chip on a circuit board or the like. The present invention addresses the problem of providing a
Sandcastle glue components are synthesized, packaged into secretory granules, and stored until secretion in at least four distinct types of cells in the adhesive gland. The secretory cells and granules stain differentially as seen in the coronal section through the adhesive gland shown on the left. Each type of granule contains oppositely charged components, as is commonly observed in secretory granules transiting through the regulated secretory pathway. The granules appear to be secreted in tact and partially mixed shortly after secretion. The distribution of glue proteins and the secretory process are diagrammed on the right. The jump in pH upon secretion into seawater likely plays a key role in the setting and hardening reactions ...
A polymeric woven bag has a first panel and a second panel and an open end of the bag to be pinched closed. A first layer of heat activated adhesive material is on a portion of the bag to form an adhesive-to-adhesive seal by contact with a second layer of heat activated adhesive material on a portion of the bag. second panel, wherein the first adhesive layer and the second adhesive layer have respective heat activation temperatures below the softening point temperature of the polymeric bag material, and wherein sealing the bag end after the bag has been filled with contents by heat activating the first layer of adhesive material and the second layer of adhesive material at a temperature below the softening point temperature of the polymeric bag material.
Mussels secrete proteins from their feet that allow them to cling to rocks in the face of powerful waves. By mimicking this technique, researchers have created a simple synthetic material that can prime and fuse two surfaces underwater.
Preferably the beta-lactoglobulin and the anionic polymers are essentially free of salts ( Preferably the anionic polymer comprises a caseinate or a casein derivative. Encapsulates comprising beta-lactoglobulin and caseinate according to the invention are highly susceptible towards the proteolytic activity as observed in the human stomach. Therefore their disintegration and release of the content occurs earlier as from encapsulates based on modified gelatin (crosslinked). Gelatin is known to be more resistant against the proteolytic activity of the stomach by pepsin but not against the duodenal proteases. This time difference in release between gelatin and non-gelatin encapsulates results in a faster dissolution of the encapsulated agents in the stomach contents from the non-gelatin product, resulting in a better bioavailability for compounds for which dissolution is the rate-limiting step in the bioavailability ...
... is Black in color and is chemically resistant to Brake fluid, oils, water. RFA-142 is recommended for bonding Bonding friction material to metal.
Conductive adhesives are widely used in electronic packaging applications such as die attachment and solderless interconnections, component repair, display interconnections, and heat dissipation. The effects of film thickness as functions of filler volume fraction, conductive filler size, shape, as well as uncured adhesive matrix viscosity on the electrical conduction behavior of epoxy-based adhesives are presented in this work. For this purpose, epoxy-based adhesives were prepared using conductive fillers of different size, shape, and types, including Ni powder, flakes, and filaments, Ag powder, and Cu powder. The filaments were 20 μm in diameter, and 160 or 260 μm in length. HCl and H3PO4 acid solutions were used to etch and remove the surface oxide layers from the fillers. The plane resistance of filled adhesive films was measured using the four-point method. In all cases of conductive filler addition, the planar resistivity levels for the composite adhesive films increased when the film thickness
Conductive adhesives are widely used in electronic packaging applications such as die attachment and solderless interconnections, component repair, display interconnections, and heat dissipation. The effects of film thickness as functions of filler volume fraction, conductive filler size, shape, as well as uncured adhesive matrix viscosity on the electrical conduction behavior of epoxy-based adhesives are presented in this work. For this purpose, epoxy-based adhesives were prepared using conductive fillers of different size, shape, and types, including Ni powder, flakes, and filaments, Ag powder, and Cu powder. The filaments were 20 μm in diameter, and 160 or 260 μm in length. HCl and H3PO4 acid solutions were used to etch and remove the surface oxide layers from the fillers. The plane resistance of filled adhesive films was measured using the four-point method. In all cases of conductive filler addition, the planar resistivity levels for the composite adhesive films increased when the film thickness
Global Thermally Conductive Adhesives Market Professional Survey Report 2018 1 Industry Overview of Thermally Conductive Adhesives 1.1 Definition and Specifications of Thermally Conductive Adhesives 1.1.1 Definition of Thermally Conductive Adhesives 1.1.2 Specifications of Thermally Conductive Adhesives 1.2 Classification of Thermally Conductive Adhesives 1.2.1 Acrylic Thermal Conductive Adhesives 1.2.2 Epoxy Thermal Conductive Adhesives 1.2.3 Silicone Thermal Conductive Adhesives 1.2.4 Polyurethane Thermal Conductive Adhesives 1.2.5 Other 1.3 Applications of Thermally Conductive Adhesives 1.3.1 Automotive 1.3.2 Aerospace 1.3.3 Biosciences 1.3.4 Consumer Electronics 1.3.5 Other 1.4 Market Segment by Regions 1.4.1 North America 1.4.2 China 1.4.3 Europe 1.4.4 Southeast Asia 1.4.5 Japan 1.4.6 India 2 Manufacturing Cost Structure Analysis of Thermally Conductive Adhesives 2.1 Raw Material and Suppliers 2.2 Manufacturing Cost Structure Analysis of Thermally Conductive Adhesives 2.3 Manufacturing ...
Ilias main project involves technique development for high field EPR and DNP (at 7T). Presently, Ilia and his team are developing new approaches for more efficient DNP using unique capabilities of their spectrometer capable of generating arbitrary shaped pulses at 200 GHz. The second project Ilia works on is part of large multidisciplinary collaboration dedicated to development of underwater adhesives based on mimicking the adhesives used by mussels in the ocean. They employ a range of techniques such as confocal microscopy, microrheology, EPR and Overhauser DNP to characterize the material and molecular properties of recently discovered adhesive coacervate phases.. ...
Travel company Schauinsland-Reisen broke the record for the worlds tallest sandcastle on Friday in Duisburg, Germany. Rough cut (no reporter narration).}
High Temperature Gasket Adhesive, High Temperature Gasket Adhesive Suppliers Directory - Find variety High Temperature Gasket Adhesive Suppliers, Manufacturers, Companies from around the World at adhesive glue ,clear adhesive film ,silicone sealant adhesive making machine, Adhesives & Sealants
Mussel adhesive proteins (MAPs) are remarkable underwater adhesive polymers that form tenacious bonds to anchor marine organisms onto the substrates upon which...
Should a universal adhesive be used with a self- or dual-cured buildup or cement?. Although universal adhesives are typically on the higher end of the pH spectrum of self-etching adhesives, they are still relatively acidic (Figure 2). A common problem of any one-step self-etching adhesive is they will leave an acidic surface following application to tooth structure. This acidic surface will interfere with the amine-based chemical reaction used to cure self-cured or dual-cured resins.17 In other words, application of an acidic universal adhesive to tooth structure can prevent curing of a self-cured resin cement or buildup material placed on top of it. In some cases, this may cause debonding of a buildup, post or fixed restoration.. There are two methods to avoid this possible failure. The first is to use a dual-cure activator with the universal adhesive. This activator is typically sold with the universal adhesive and can be mixed in a 1:1 ratio with the adhesive. It contains arylsulfinate salts ...
Medical tape is a type of pressure-sensitive adhesive tape used in medicine and first aid to hold a bandage or other dressing onto a wound. These tapes usually have a hypoallergenic adhesive which is designed to hold firmly onto skin, dressing materials, and underlying layers of tape, but to remove easily without damaging the skin. They allow air to reach the skin ("breathable ...
In the past several decades the problem of longevity and durability of adhesive interfaces between hard tooth tissues and composite resin-based materials are of great interest among dental researchers and clinicians. These parameters are partially determined by adhesive system mechanical properties. In the present research project nanoindentation has been examined to test hardness of dental adhesive systems. A series of laboratory experiments was performed to study the effect of light curing time and oxygen inhibition phenomenon on light-cured adhesive material hardness. An adhesive system AdperTM Single Bond (3M ESPE) was selected as a material for testing. The analysis of experimental data revealed that the maximum values of hardness were observed after the material had been light-cured for 20 seconds, as outlined in guidelines for polymerization time of the adhesive system. The experimental studies of oxygen inhibition influence on adhesive system hardness pointed out to the fact that the ...
PAMAM can be used as modified additives for urea-formaldehyde resin adhesive, due to its special structure, a large number of end groups, as well as the nature of the end groups can greatly improve its urea-formaldehyde resin adhesive agent properties. PAMAM-NH2,-OH,-NH3Cl can well improve the performance of urea-formaldehyde adhesive, in particular the quaternary amine-modified PAMAM has more superior performance, compared with conventional curing agent of ammonium chloride, its shear strength increased by 64%.(1) PAMAM contains a large number of surface groups, easily array in the gas-liquid interface, urea-formaldehyde resin surface tension can be reduced , contact angle decreased, increasing the wettability of the wood material surface to provide adhesion.(2) PAMAM contains a large number of active groups to improve reactivity of the system. And form a chemical bridge between the adhesive and the base material to improve adhesion.(3) reducing the viscosity of the system to make it more ...
JVCC FPPT-01 Kraft Flatback Paper Packaging Tape is a brown color kraft flatback paper. It is a pressure-sensitive adhesive tape which complies with Postal Regulation for Uninsured Packages. Rank #38 in Kraft Flatback Paper Tape (Hand-Tearable) category.
Low surface energy liner provided by segments of a perfluoropolyether monomer which has been in-situ polymerized into a cohesive network which is adhered to a substrate. The low surface energy liner is especially useful as a low-adhesion backsize coating for a pressure-sensitive adhesive tape.
Engaged in manufacturing, exporting and supplying of adhesive chemicals, polyurethane adhesives, silicone sealant, industrial adhesive tapes, speciality adhesives, synthetic adhesives, industrial adhesives, pvc flooring adhesive, epoxy adhesives etc. Zenith Spray And Aerosols Private Limited Delhi
Find Best 3m Spray Adhesive Supplier on Alibaba 3m Spray Adhesive Supplier Directory. Source Top Quality 3m Spray Adhesive Supplier, 3m Spray Adhesive Companies, 3m adhesive tapes ,spray adhesive ,adhesive spray gun Manufacturers
A method of selecting components for use in water-absorbing pressure-sensitive adhesive compositions is provided. The method involves selecting a film-forming polymer, a ladder-like non-covalent cross
Our consultants have extensive knowledge of adhesives, including one- and two-part liquids, structural films, pressure-sensitive adhesives (PSAs) and foams. We provide fundamental and practical understanding of the chemistry and kinetics of curing and crosslinking, viscoelastic properties, and factors associated with adhesion and release. |br| |br| We also have extensive knowledge of fibers and composites. Our team has addressed questions of composition, curing, physical properties and durability of composites used in piping, bath and spa, recreational, marine, automotive, and aerospace applications. We have also significant experience with the properties and performance of high performance fibers used in structural and ballistic applications.|br| |br| The polymer mechanics investigations that are performed by Exponent staff focus on understanding the governing micromechanical mechanisms that control the often-complicated behavior exhibited by polymers in different environments. Scientists and
The Kraton D SBS family of polymers is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. The SBS block copolymers are composed of blocks of styrene and butadiene. It is the material of choice for footwear and the modification of bitumen/asphalt. It is also very useful in pressure-sensitive adhesives, hot-melt spray diaper adhesives, construction adhesives, impact modification of styrenics, thermoformed clear rigid packaging, and compounds.. ...
Scapa TD-500 ATG Tape, AKA Unifilm TD500, is a heavy-duty unsupported acrylic adhesive transfer film (pressure-sensitive adhesive pre-applied to a special release liner). Used for mounting. Rank #56 in Double-Sided Tape category.
Thermosetting systems, unlike thermoplastics, form permanent, heat-resistant, insoluble bonds that cannot be modified without degradation. Adhesives based on thermosetting polymers are widely used in the aerospace industry. Thermosets include phenol formaldehyde, urea formaldehyde, unsaturated polyesters, epoxies, and polyurethanes. Elastomer-based adhesives can function as either thermoplastic or thermosetting types, depending on whether cross-linking is necessary for the adhesive to perform its function. An important challenge facing adhesive manufacturers and users is the replacement of adhesive systems based on organic solvents with systems based on water. This trend has been driven by restrictions on the use of volatile organic compounds (VOC), which include solvents that are released into the atmosphere and contribute to the depletion of ozone. In response to environmental regulation, adhesives based on aqueous emulsions and dispersions are being developed, and solvent-based adhesives are ...
Cells are composed of collections of highly complex but tightly regulated reaction networks that are well organized both in space and in time. Spatial organization can be achieved through localization of molecules and reactions at surfaces and in compartments.1,2 Besides membrane-encapsulated organelles, cells are known to form different types of membraneless organelles with varying compositions.2-4 Examples include germ granules,5,6 processing bodies,7,8 stress granules9,10 and nucleoli.11-13 Increasing evidence indicates that most of these compartments can be classified as coacervates:14,15 they are liquid droplets that are enriched in macromolecules and are formed by a liquid-liquid phase separation.3,14-21 The liquid-like nature and absence of an encapsulating membrane give rise to a direct link with processes taking place in the cytoplasm or nucleoplasm,3 providing for functions such as sequestration, buffering and reaction rate modulation.2 Like in many synthetic model systems that exhibit ...
Hitachi Chemical co., ltd. is a chemical manufacturer engaged in a wide range of areas, including semiconductor and display-related materials, printed wiring boards, copper clad laminates, photosensitive dry films, functional polymeric materials, adhesive films, carbon products, ceramics and automotive related products. Hitachi Chemical co., ltd. is a manufacturer of semiconductor- and display-related materials, printed wiring boards, copper clad laminates, photosensitive dry films, functional polymeric materials, adhesive films, carbon products, ceramics and automotive related products.
Hitachi Chemical co., ltd. is a chemical manufacturer engaged in a wide range of areas, including semiconductor and display-related materials, printed wiring boards, copper clad laminates, photosensitive dry films, functional polymeric materials, adhesive films, carbon products, ceramics and automotive related products. Hitachi Chemical co., ltd. is a manufacturer of semiconductor- and display-related materials, printed wiring boards, copper clad laminates, photosensitive dry films, functional polymeric materials, adhesive films, carbon products, ceramics and automotive related products.
Objectives: Evaluate the performance of two self-etching adhesives clinically. Methods: Eighty-four Class V restorations were placed in 21 patients in need of 2, 4 or 6 restorations in incisors, canines and premolars. The retention relied only on the adhesive (no mechanical retention). The two evaluated adhesives were iBond NG plus B(IBSE)(Heraeus Kulzer GmbH) and Clearfil SE (CLSE)(Kuraray), and the composite was Venus (Heraeus Kulzer GmbH). One week after placement, the patients were recalled for baseline evaluation. Following the baseline evaluation, the patients were recalled and evaluated after 3 months, 1 year, 2 years and 4 years using similar evaluations. Results: At the 4-year evaluation, 4 patients did not show up for evaluation. The remaining 17 patients had originally received 66 restorations (33 of each adhesive). Of these restorations, 8 had been lost during the 4 years (4 IBSE and 4 CLSE). A noticeable finding was that two of the restorations (1 IBSE and 1 CLSE) had failed in the ...
Involved in manufacturing, exporting and producing of automotive adhesives, tape adhesives, paper tube adhesive, abrasive adhesive, super premium resin, epoxy adhesives, anaerobic adhesives, cushion gums, industrial adhesives, etc. Shri Meera Labs Private Limited Chennai
Browse detailed TOC, Tables, Figures, Charts and Companies mentioned in Automotive Laminating Adhesives Sales Market research report @ Table of Content Includes:. 1.Automotive Laminating Adhesives Sales Market Competition by Manufacturers. 2.Automotive Laminating Adhesives Sales Production, Revenue (Value), Price Trend by Type. 3.Automotive Laminating Adhesives Sales Manufacturing Cost Analysis. 4.Automotive Laminating Adhesives Sales Market Effect Factors Analysis. Further in the report, the Automotive Laminating Adhesives Sales market is examined for price, cost and gross. These three points are analysed for types, companies and regions. In continuation with this data sale price is for various types, applications and region is also included. The Automotive Laminating Adhesives Sales Industry for major regions is given. Additionally, type wise and application wise figures are also ...
adhesive - MedHelps adhesive Center for Information, Symptoms, Resources, Treatments and Tools for adhesive. Find adhesive information, treatments for adhesive and adhesive symptoms.
Strong Adhesion Hot Melt Glue Double Side Tissue Tape picture from Guangzhou Guanghui Plastic Packaging Co., Ltd. view photo of Double Side Tape, Double Side Tissue Tape, Tissue Tape.Contact China Suppliers for More Products and Price.
Prelude Adhesive is part of the Prelude Adhesive System which is a nanohybrid, light cured, self-etch or total-etch dental adhesive ideal for bonding composite to dentin, enamel, porcelain and metal. Its low film thickness does not interfere with the fit of indirect restorations ...
Film adhesives have great application potential in high-tech areas like aerospace. Bonding is the technique employed in the manufacture of several critical structure components for aerospace applications. Notable components include, honeycomb structures, antennas, solar sail and solar panel for satellites. Solar sail is made by bonding polyimide film segments. A polyimide suitable for such applications is marketed by DuPont in the trade name KAPTON. The bonding requirements in majority of these areas ar e generally met by use of glue-1ike and solvent-based resinous polymeric adhesives. There is an increased preference for dry film adhesives for such applications. This is because use of film adhesive can faci1itate bonding manoeuvre, avoid use of solvents and help regulate the flue line thickness and minimise wastage of adhesive and accumulation of dead weight which are very critical when weight saving becomes a matter of concern. A few film adhesives for structural and general purpose ...
The packaging industry desires adhesive compositions having a fast set time, such as those setting in less than five seconds from a molten state at conventional packaging operating temperatures to a solid or quasi solid having favorable Dot T-Peel, set time, and/or fiber tear adhesion properties. Polymer based adhesives performing within this window are a favorable alternative to conventional formulated adhesives. The provided adhesive compositions exhibit a favorable balance of properties such as high adhesive strength, wide temperature operating window, and fast set time. Provided are adhesive compositions composed of a polyolefin composition comprising at least about 50 mol % polypropylene, at least one wax and at least one wax modifier.
Contents of the 15 Chapter for This Waterborne Adhesives Market Study:-. Chapter 1: to describe Global Waterborne Adhesives Market Introduction, product scope, market overview, market opportunities, market risk, market driving force;. Chapter 2: to analyze the top manufacturers of Global Waterborne Adhesives Market, with sales, revenue, and price of Global Waterborne Adhesives Market, in 2016 and 2017;. Chapter 3: to display the competitive situation among the top manufacturers, with sales, revenue and market share in 2016 and 2017;. Chapter 4: to show the Global Waterborne Adhesives market by regions, with sales, revenue and market share of Global Waterborne Adhesives Market, for each region, from 2012 to 2017;. Chapter 5, 6, 7, 8 and 9: to analyze the key regions, with sales, revenue and market share by key countries in these regions;. Chapter 10 and 11: to show the market by type and application, with sales market share and growth rate by type, application, Methodology, Analyst Introduction, ...
Synonyms for Adhesives in Free Thesaurus. Antonyms for Adhesives. 25 synonyms for adhesive: glue, cement, gum, paste, mucilage, sticky, holding, sticking, attaching, clinging, adhering, tacky, cohesive, tenacious, glutinous. What are synonyms for Adhesives?
Live Clean sent the whole line of their Eco Friendly Live Clean Baby line for us to try. I was heading out of town when it first arrived and in between trips I have tried it out on my boys. They arent quite babies but, my 2yr old is close enough that he still has baby fat fingers. My oldest has sensitive skin and I was eager to see how his skin would react. Tearless Shampoo, Moisturizing Baby Bath,and Moisturizing Baby Lotion, where all light scented. My little guys did well with all these and I felt better with these clean products for my family. Children learn from imitation, so what better product to learn to use than earth & family safe products ...
My oldest son loves asking question about bugs and Education Insights Geo Safari Jr Talking Bug Net has some answers. Its a cute interactive talking net that comes with 6 bug. Enter one bug at a time and the net gives you facts about it. The net also asks questions like which insect can spin silk and then my son adds his insect to the net to see if he gets the question right. Dozen of facts & quiz questions, game mode, fun sounds that bring out the explorer in little ones. ...
What it is:An effective brush-on adhesive formula for false lashes. What it is formulated to do:This high-quality brush-on formula comes with an ultrathin brush for precise, quick application of both strip and individual lashes for all-day wear. E
Wholesale Component Adhesive - Select 2018 high quality Wholesale Component Adhesive products in best price from certified Chinese Strong Adhesive manufacturers, China Adhesive suppliers, wholesalers and factory on
When I was growing up, the only glues I used were model glue and various brands of white paper glue. Even the local hardware store only stocked two or three types of adhesives. Now when you walk through your hardware store you are faced with a daunting array of glues and adhesives for every possible application. The problem, as with any large menu, is how do you know which is the right one?
An adhesive article adapted to attach structures to a substrate and a method of using the same. The adhesive article has a failure mode that minimizes damage to the substrate surface. The adhesive art
Uline stocks a wide selection of Spray Adhesive, Spray Adhesives and Spray Adhesive For Paper. Order by 6 pm for same day shipping. Ships from Toronto for fast delivery of Aerosols.
sprayable contact adhesive for sale - 22 - sprayable contact adhesive wholesalers & sprayable contact adhesive manufacturers from China manufacturers.
Wholesale Self adhesive waterproof membrane from China Self adhesive waterproof membrane Wholesaler - we are quality Self adhesive waterproof membrane Supplier of kingwaterproofmaterial.
Find Thermoset Adhesives on GlobalSpec by specifications. Thermoset adhesives are crosslinked polymeric resins that are cured using heat and/or heat and pressure. They are used for high load assemblies and in severe service conditions.
Proper Adhesive Storage Means Greater Profits. Over the lifetime of an application, you may significantly reduce your adhesive usage by paying close attention to the adhesive shelf life and storage conditions recommended by Cyabond . Because of the various chemistries involved in the adhesives Cyabond manufacturers, we have developed specific storage condition recommendations by product. These recommendations should be reviewed prior to selecting an adhesive for your application and should be followed whenever possible. The shelf life of each Cyabond adhesive is based on our experience with that product under controlled conditions. Therefore, we are certain that these adhesives when stored per our guidelines will maintain their performance over the course of the shelf life given. Unfortunately, if the adhesive has not been stored according to the recommendations given we often have no information as to how it will perform. Adhesive Shelf Life. The shelf life of a product is the time it may be ...
Shop adhesives and save up to 75% off list prices at the worlds largest online discount arts and crafts supply store! Discover art adhesives for all applications. Prices ranging from $3-4. Sorted by A-Z.
Shop adhesives and save up to 75% off list prices at the worlds largest online discount arts and crafts supply store! Discover art adhesives for all applications. Items by Surebonder. Prices ranging from $6-9999.99.
Adhesives are means of securing two surfaces together. They may be sold in solid, liquid, powder, or film form. Common types of adhesives include:Animal or Fish Glues-primarily for indoor use where temperature and humidity do not vary greatly-may be we...
Zinc Adhesive Factory - Select 2018 high quality Zinc Adhesive Factory products in best price from certified Chinese Zinc Aluminium manufacturers, Zinc Aluminium Alloy suppliers, wholesalers and factory on
Flivasorb is effective under compression, meaning a combined approach to treatment can be taken to optimize healing potential.It is particularly effective under Actico which is ideal for chronic oedema where high levels of lymphorrea(wet leaky legs) are common.. Flivasorb has a silky smooth integrated contact layer, reducing the need for an additonal primary protection layer. It is cost effective - helping you manage exudate and your budget.. Flivasorb is available as an adhesive dressing (Flivasorb adhesive) combining the benefits of Flivasorb with a skin friendly, flexible adhesive membrane.. ...
Compare Welland adhesive remover wipes price and read Welland adhesive remover wipes reviews before you buy. Find the best deal on
Chemique Adhesives is a global leader in the manufacture and supply of high performance industrial adhesives. Read more about our industrial adhesives today.
The second experiment will attempt to prove that if space is provided and homogeneous cell interactions are preferred, that a cluster of cells with different adhesive affinities will relocate in order to achieve separate homogeneous clusters. This experiment will test the hypothesis that the cluster of cells with the higher adhesive affinity will migrate away from the cluster of cells with the lower adhesive affinity. This experiment could be performed by creating a cell adhesion affinity gradient sample in vitro, containing clusters of cells ranging from a low adhesive affinity to a high adhesive affinity. The clusters of cells would be arranged progressing from low affinity to high affinity. Then, an external cluster of high adhesive affinity cells would be added to an area of the gradient which contains a lower adhesive affinity. I expect that the cluster of high adhesion affinity cells would migrate until it reached a place where the gradient is greater on one side and lower on the other ...
Xyron Refill Cartridge For Xyron 1200. This Cartridge Is Duo Action Laminating One Side While Applying An Even Layer Of Adhesive On The Other. Make Professional Quality Bumper Stickers Signs And Labels. Features Lamination And Permanent Adhesive Applicati
... formulates all of our adhesives and sealants to be as safe as possible while providing all of the performance capabilities demanded by our customers. But adhesives are still chemicals and precautions must be taken to eliminate or minimize contact with skin and eyes. To better support our customers in this endeavor and to ensure that production processes are operated safely, Cyabond routinely provides training in the safe use of our products. Things to Consider When Handling Adhesives. As with the handling of any chemical, appropriate training of all employees who handle adhesives is essential to maintaining a safe working environment. An understanding of these general usage and handling recommendations will go a long way toward ensuring worker safety. General Contact ...
3M™ Adhesive Transfer Tape 463 features a high tack adhesive to aggressively bond most paper stocks and other substrates. It is ideal for high-speed flying splices and zero splices on most grades of paper, though it also bonds a variety of other similar and dissimilar materials.
Aerosol contact adhesive designed for bonding vinyl tops, heavyweight liners and hood silencer pads where high strength and heat resistance are needed. Features and Benefits A high performance aerosol contact adhesive. Designedfor bonding vinyl tops, heavyweight liners and hood silencer pads where high strength and heat resistance are needed. NOTE: This is a hazardous item and cannot be shipped by air or
With the development of economy and science, adhesive is indispensable in industry, agriculture, transportation, medical care, national defense and daily life. Almost anyone and anything are involved ...
Seam adhesive. Solvent based contact adhesive designed for seaming the GenTite rubber roofing (EPDM) membranes and flashings. Gallon, coverage: ...
Shanghai Rocky Adhesives is exhibiting the product Membrane Press Adhesives at LIGNA from 22 to 26 May. 2017 in Hannover, Germany. Plan your visit to the trade fair and search for further products.
We developed 3M™ Industrial Adhesive 4550 as a sprayable, synthetic elastomer-based adhesive for bonding a variety of lightweight materials such as felt, cork, cardboard, paper, wood, plastic wrap and other common materials used in shipping and packaging. Ideal for palletizing
Perstorps comprehensive portfolio allows adhesive producers to improve and fine-tune the properties of their hot-melt, reactive hot-melt and liquid PU adhesives
Clear Dairy Adhesive from Weaver Leather. Lightweight, clear-drying adhesive ideal for toplines. Helps give the shape and definition desired in the show ring.
... offer heat activated adhesive built into the color coded sleeve of the heat shrink tubing.
Do adhesives have an impact on human health?Fortunately, the days when floor coverings were laid by the use of solvent-containing adhesives are over. Today, we use water-dilutable adhesives which may, however, also cause health problems because solvent-free is not equal to pollutant-free. The adh...
Professional 30ml all purpose universal contact adhesive manufacturer and supplier with 11 years experience. Wholesale the quality and cheap products from our factory. We will offer you good after-sale service and fast delivery.
In the disclosed method, a first fluid (36) comprising the first phase and a first precursor polymer of the coacervate in the first phase is supplied, and drops of the first fluid (36) are formed in a second fluid (40) that is to form th ...
Youll find a woodworker in a sticky situation if his glue wont stick. How do you choose the all-around best adhesive for the job at hand? Heres some advice on what glues can and cant do.
... Shop POSPaper manufacturer direct for guaranteed lowest price & fast shipping!
UV curable adhesive with excellent adhesion to a wide range of materials. Well suited for use in applications requiring bonding to hard to adhere substrates. Rigid, wide temperature use range, & cures in seconds.. Learn More ...
Adhesives - Search and browse products and chemical formulations for your market. Filter products by market, construction, function, manufacturer or segment.
Low Mist Super 77 Spray Adhesive 24 Oz. - 3m™ - Since 1998, iboats is the most trusted water lifestyle online store for boat parts and accessories, boats for sale, and forums. Enjoy great priced products with fast shipping.
For mounting photographs, art prints, maps and drawings. Clear, professional-grade, photo-safe adhesive is pH neutral. Dries clear.
HGF/SF selectively activates the adhesive potential of αvβ3 integrin in HTU-5 cells. (A) HGF/SF promotes αvβ3-mediated adhesion to VN in a dose-dependen
Looking for LOCTITE Instant Adhesive,1 oz. Bottle,Clear (5E206)? Graingers got your back. Price:$25.80. Easy ordering & convenient delivery. Log-in or register for your pricing.
Looking for LOCTITE Instant Adhesive,20g Tube,Clear (2VFH3)? Graingers got your back. Price:$35.10. Easy ordering & convenient delivery. Log-in or register for your pricing.
rat hepatoma adhesive factor: MW 70,000 thermostable glycoprotein from surface of rat ascitic hepatoma cells; dimer has MW 130,000
Fixodent Food Seal Plus Scope Flavor kills odor-causing germs for fresher breath and confidence in any situation--without compromising the great hold...
Adhesive tapes[edit]. See also: List of adhesive tapes. *Adhesive tape, any of many varieties of backing materials coated with ... Flagging (tape), a colored non-adhesive tape used in marking objects. Recording media[edit]. *Compact Cassette or cassette tape ... Surgical tape or medical tape, a form of pressure-sensitive adhesive tape used in medicine and first aid as a bandage to hold a ... Copper tape or slug tape, adhesive-backed copper tape used to keep slugs and snails out of certain areas ...
Adhesive tape[edit]. Andre Geim and Konstantin Novoselov initially used adhesive tape to split graphite into graphene. ...
... with a smaller volume made using solvent-based adhesives and hotmelt adhesives. The most common adhesive types are:. *Permanent ... Pressure-sensitive adhesive types[edit]. Pressure-sensitive label adhesives are commonly made from water-based acrylic ... Hot melt adhesives are also used.. *Pressure-sensitive adhesives (also called PSA or self-stick) are applied with light ... the PSA adhesive stays with the backing and is easily removed. Paper backings without wet strength may release their adhesives ...
Adhesive Technologies[edit]. Henkel is the world's number one adhesives producer. The business unit offers a broad portfolio of ... Henkel found there was a demand for adhesives on the market, and on 22 June 1923, the first adhesive shipment left the plant.[3 ... In its beauty division, its main competitors are Unilever, Procter & Gamble and L'Oréal.[36] In its chemical and adhesive ... "Henkel invests in adhesive technology innovation center". 2018-09-12. Retrieved 2018-10-30.. ...
"SpecialChem Adhesives. Archived from the original on 11 February 2007. Retrieved 27 February 2007.. ... Antioxidant polymer stabilizers are widely used to prevent the degradation of polymers such as rubbers, plastics and adhesives ...
HPMC is used primarily in construction materials like tile adhesives and renders[6] where it is used as a rheology modifier and ...
Adhesive weight. 201,800 lb (91,534.9 kg; 91.5 t). Loco weight. 365,500 lb (165,788.0 kg; 165.8 t). ...
"Adhesives Age. 1 June 1998. Archived from the original on 15 October 2012. Retrieved 24 September 2011.. ...
... adhesives have a short shelf life. Date-stamped containers help to ensure that the adhesive is still viable. One ... Palm Labs Adhesives: Cyanoacrylate Adhesive Shelf Life Archived 14 July 2014 at the Wayback Machine. ... There is no singular measurement of toxicity for all cyanoacrylate adhesives because of the large number of adhesives that ... Cyanoacrylate adhesives may adhere to body parts, and injuries may occur when parts of the skin are torn off.[24][25] Without ...
"Animal Glue, Hot Melt Adhesive, Liquid Adhesive, Packaging Adhesive, Pur Glue, PVA Adhesives, Resin". L.D. Davis Industries.. ... This adhesive is mostly used as glue, sizing, or varnish, although it is not as frequently used as other adhesives because it ... Darrow, Floyd (1930). The story of an ancient art, from the earliest adhesives to vegetable glue. Perkins Glue Company.. ... 2010). Handbook of Adhesives and Surface Preparation Technology. William Andrew. p. 160. ISBN 1437744613. .. ...
... adhesives are a major part of the class of adhesives called "structural adhesives" or "engineering adhesives" (that ... Epoxy adhesives are better in heat and chemical resistance than other common adhesives. In general, epoxy adhesives cured with ... Epoxy adhesives can be developed to suit almost any application. They can be used as adhesives for wood, metal, glass, stone, ... Adhesives[edit]. Special epoxy is strong enough to withstand the forces between a surfboard fin and the fin mount. This epoxy ...
SpecialChem Adhesives. Consultado em 27 de fevereiro de 2007.. *↑ a b «Fuel antioxidants». Innospec Chemicals. Consultado em 27 ...
Adhesive capsulitis of shoulder. *Rotator cuff syndrome of shoulder and allied disorders ...
Forsyth RS (2004). "Waterborne Adhesives for Bottle Labeling". Tappi PLACE Division Conference. Atlanta, Ga.: TAPPI. p. 33. ...
Vinyl floor tiles, sheeting, adhesives. *Roofing tars, felts, siding, and shingles[55] ...
Adhesives; Biological materials Medicinal materials Superconductive materials; Optoelectronics and nanomaterials; Software ...
They may be able to deal with the situation in its entirety (a small adhesive bandage on a paper cut), or may be required to ... Basic principles, such as knowing to use an adhesive bandage or applying direct pressure on a bleed, are often acquired ...
... activating and cleaning plastic and metal surfaces to prepare them for adhesive bonding and painting. Sheet materials up to ... International Journal of Adhesion and Adhesives; 24 (2) 2004, pp. 171-177 ...
Adhesive obstructions often settle without surgery. If the obstruction is complete a surgery is usually required. ... Abbas, S; Bissett, IP; Parry, BR (18 July 2007). "Oral water soluble contrast for the management of adhesive small bowel ... contrast in the cecum on an abdominal radiograph within 24 hours of it being given by mouth predicts resolution of an adhesive ...
For treatment, can include: sewing supplies, such as needles, pins, thimble, scissors, dress makers tape; various adhesives; ...
Since then, Loctite has remained a primary Henkel brand and a supplier of household adhesives, epoxies, spray adhesives, ... adhesives, dispensing equipment, curing systems) Adhesive equipment (controllers, reservoirs, applicators, valves, dispensing ... The 1980s brought about the addition of a line of micro anaerobic adhesives. In 1997, Loctite was acquired as a flagship brand ... "Anaerobic Adhesives". Henkel Corporation. Retrieved 14 August 2012. Staff, Times; Reports, Wire (1996-12-06). "Loctite Agrees ...
Special adhesives were used to attach the frame and body. Equally important, an entirely new drive train was used, the 1996 ... "Plexus Adhesives". Retrieved 2017-01-08. "Construction". Retrieved 2017-01-08. "Specs ...
He is a notable researcher in the United States in use of fibrin glue (a surgical adhesive used to create hemostasis). Spotnitz ... He also previously served as the director of the hospital's Tissue Adhesive Center, which promoted and advanced the use of ... For his contributions in the "development of tissue adhesives for surgical use", Spotnitz was inducted into the 2004 class of ... doi:10.1016/S0002-9610(01)00771-1. Spotnitz, William D.; Prabhu, Roshan (2005). "Fibrin Sealant Tissue Adhesive−Review and ...
Also, potassium nitrate can be applied topically in an aqueous solution or an adhesive gel. Oxalate products are also used ... Nowadays, dentin hypersensitivity treatments use adhesives, which include varnishes, bonding agents and restorative materials ...
Opened adhesive bandage, showing the non-adhesive absorbent pad, adhesive area (colored) and backing (peeled back) ... "Allergy to Bandages and Adhesives". Health.. *^ Daniel More, MD. "Allergic Reactions to Adhesive Bandages". ... An entirely transparent adhesive bandage, with a transparent hydrogel pad and adhesive waterproof plastic film (removable ... An adhesive bandage, also called a sticking plaster (or simply plaster) in British English, is a small medical dressing used ...
Definition of adhesive arachnoiditis. Provided by Stedmans medical dictionary and Includes medical terms and ... adhesive arachnoiditis. Definition: thickening of the leptomeninges, sometimes with obliteration of the subarachnoid space; ...
Scotch® Fine Line Tape 218 is a high-performance polypropylene plastic tape that has both a low profile and high adhesion for use in painting long straight lines and sweeping curves where a crisp, sharp paint line is desired. It is often used as a layout tape for high value multi-color and custom painted graphics.
3M proizvaja izdelke, ki imajo resnično velik vpliv na vaše vsakdanje življenje: naši izdelki vam mdr. nudijo varno vožnjo ponoči, varnejše stavbe, materiale, ki so prijaznejši planetu.
Past efforts aimed at replacing the phenolic material in wood adhesives by tannins of various origins have been extensive ... Condense Tannin Adhesive Formulation Bond Quality Glue Line Wood Adhesive These keywords were added by machine and not by the ... Kreibich, R.E. High-speed adhesives for the wood gluing industry. Adhesives Age 17: 26 (1974).Google Scholar ... These tannin-based, cold-setting adhesive formulations include an adhesive blend to be applied as a one-component system and a ...
We advance our customers formulations with our passion for chemistry. We help you bring printing solutions to the packaging industry that are differentiated, innovative and sustainable. Our broad product portfolio of dispersions, eco-friendly resins, pigments and additives allow your customers to achieve high quality printing results.. ...
Shop for Papercraft adhesives to keep your paper masterpieces together. Find glues that come in different colors, as well as ... Adhesives & Mediums Albums & Refills Albums Refills & Accessories Bible Journaling Cameras Accessories Card Making Craft ... General Crafts Sewing / Crochet Candlemaking Christmas Crafting Craft Basics Glue, Tape & Adhesives Googly Eyes Miniatures ... Sewing & Quilting Notions Adhesives Bonding & Stabilizers Cutting Tools Dress Forms Elastic Fabric Dye & Color Remover ...
Used in the manufacture of solvent-based or solvent-free synthetic TPU adhesives, it can help overcome bonding challenges in ... Design engineers pushing new boundaries need adhesives that can create long-lasting, durable bonds between dissimilar ...
Huntsman is a global leader in the development and supply of Consumer Adhesives, including Araldite® Glue. ... Adhesives Huntsman Advanced Materials offers a complete range of high performance adhesives for the industrial and consumer ... For over 40 years, Araldite® adhesives has been the adhesive range of choice in a huge variety of industry sectors ranging from ... Araldite® adhesive covers a broad range of applications and offers both production and performance benefits to industrial, ...
... s largest selection and best deals for Black False Eyelashes and Adhesives. Shop with confidence on eBay! ... Ardell Self Adhesive False Lashes With Extra Adhesive Strip CHOOSE YOUR STYLE. Great For Beginners And Experts Alike ... I ENVY by KISS SUPER STRONG HOLD EYELASH ADHESIVE GLUE BLACK KPEG05. I Envy Super Strong Hold adhesives have very strong ... KISS I-ENVY SUPER STRONG HOLD ADHESIVES GLUE FOR EYELASHES KPEG05 KPEG06 Duo Pk. 4.5 out of 5 stars ...
Ellsworth Adhesives, a global distributor of adhesives, specialty chemicals and dispensing equipment, is pleased to ... About Ellsworth Adhesives Ellsworth Adhesives is a distributor of adhesive products and equipment. Ellsworth Adhesives is a ... Ellsworth Adhesives, a global distributor of adhesives, specialty chemicals and dispensing equipment, is pleased to announce ... His knowledge and experience is a huge asset and will assist Ellsworth Adhesives in penetrating the emerging lighting market.. ...
Among the manufacturers using specially formulated adhesive solutions based on Betaforce composite bonding adhesives are Audi ... Structural adhesives also provide processing benefits, including the pre-treatment-free joining of carbon fiber, optimized open ... Betaforce composite bonding adhesives are designed to support hybrid constructions such as lightweight solutions. Audi and ... The decision to apply the adhesive solutions from Dow Automotive was made after comprehensive trials. Image shows typical ...
... Metallocene Hot Melt Adhesives offer pot life stability.. Cattie Adhesives - Quakertown, PA ... Adhesives & Sealants, Materials & Material Processing Air Products to Showcase Its Epoxy Curing Agents for Adhesives and ... Adhesive Solutions target wearable medical devices.. Scapa Group plc - Windsor, CT. Aug 07, 2014 Comprising material, adhesive ... Adhesives & Sealants, Green & Clean Hybrid Adhesive features structural cyanoacrylate technology.. Henkel Corporation - Rocky ...
Screen Printable Adhesives is available in a liquid form and can be positioned exactly where you need in your design with very ... 3M™ Screen Printable Adhesives can be placed exactly where you need effective hold and a printable surface in your product ... Get unparalleled flexibility with these low VOC, UV-curable adhesives, now available in a convenient liquid form to maximize ... Talk with our Technical Service Specialists about converting our Screen Printable Adhesives to your exact specifications. ...
The improved adhesion is provided by incorporating into an adhesive and/or sealant plastic material an effective amount of ... With hot melt adhesives and sealants, a gas is mixed with the adhesive composition prior to the end of the nozzle. ... An adhesive and/or sealant composition made in accordance with the present invention comprises an adhesive and/or sealant ... As noted above, it has been found that the adhesive nature of the sealant or adhesive composition is improved by the presence ...
... industrial glue and other adhesive products to help you master product design and overcome manufacturing challenges. ... 3M offers a complete catalog of adhesive tapes, ... 3M™ tapes and adhesive products can be converted into custom ... strong holding water-based adhesive. We infused viscoelastic foam with our unique adhesives to create an amazingly strong, easy ... 3M™ adhesives and tapes enable efficient bonding of dissimilar materials and hard to bond substrates. ...
... 910867. The current trend toward more aerodynamic body designs in the ... In addition, the adhesive/sealant must exhibit sufficient elastomeric properties to allow for the widely different thermal ... The higher temperatures associated with emerging smaller headlamp designs require an adhesive/sealant which can resist both ... Recent silicone research has produced some important variations in adhesives/sealants, including low-volatile versions of the ...
The hot melt adhesive composition shows improved heat resistance and favorable properties, such as has a shear adhesion fail ... If desired, the hot melt adhesive can further include tackifiers, waxes, antioxidants and other desired additives. ... bookbindings or disposables including the hot melt adhesive compositions. ... The invention provides a hot melt adhesive composition including a tubular reactor copolymer of ethylene and 5 to 20 mol % of ...
... adhesives and film components to help global medical device manufacturers bring their next big idea to life. No matter where ... Will the adhesive be compatible with both your materials of construction and the patient? Should the adhesive be medical grade? ... Formulating and applying adhesives has been a core 3M technology since we started in business back in 1902. Today, 3M Medical ... When you design adhesives and devices that are made to stick to skin, theres a lot to consider. ...
As an industrial adhesives and tapes leader, 3M brings experience, innovation and technology to help you solve tough challenges ...
In the Dec. 23 & Jan. 6 SN: Our top stories of 2017, grounded pterosaur hatchlings, protectors of the Dead Sea Scrolls, a counterintuitive metamaterial, neutron star sizing, arrow of time reversed, E. coli in flour and more. ...
Source a Large Selection of Qbond Adhesives Products at bopp adhesive tape jumbo roll ,adhesive tape ,elastic adhesive bandage ... China Qbond Adhesives, China Qbond Adhesives Suppliers and Manufacturers Directory - ... bopp adhesive tape jumbo roll adhesive tape elastic adhesive bandage adhesive glue plastic envelope with adhesive self adhesive ... You can also choose from volatile solvent adhesives, other adhesives. As well as from free samples. There are 3 qbond adhesives ...
Adhesive Otitis Media is a conflictual pathology and difficult to deal with its various aspects. A review of its pathogenesis, ... Tympanoplasty in adhesive otitis media: a descriptive study. Laryngoscope. 2016;126(12):2804-10.CrossRefPubMedGoogle Scholar ... Operative therapy of the adhesive otitis media. Zhonghua Er Bi Yan Hou Ke Za Zhi. 2004;39:40-3.PubMedGoogle Scholar ... Tos M. Tympanoplasty in chronic adhesive otitis media. Acta Otolaryngol. 1972;73:53-60.CrossRefPubMedGoogle Scholar ...
Adhesive, any substance that is capable of holding materials together in a functional manner by surface attachment that resists ... High-temperature adhesives, such as polyimides, have a limited market.. Hot-melt adhesives. Hot-melt adhesives are employed in ... In adhesive bonding, fabrics are made by forming a web of fibres, applying an adhesive, then drying and curing the adhesive. ... Adhesive materials. Virtually all synthetic adhesives and certain natural adhesives are composed of polymers, which are giant ...
The sticker should slide right off, leaving no sticky adhesive behind.. Paper. To remove adhesive tape from wall paper, you can ... Gently pull the tape as the heat softens the adhesive. To remove adhesive tape from photographs, saturate the taped area with ... Adhesive Tape. Sticky things like labels, stickers and tape can be a pain to remove. Many times, if you manage to get the tape ... If tape adhesive is clinging to your last nerve, here are some ways to get unstuck. First, try to peel off the tape. If it does ...
The term adhesive cement is sometimes used in place of adhesive, especially when referring to a synthetic adhesive. Animal glue ... adhesive adhesive. adhesive, substance capable of sticking to surfaces of other substances and bonding them to one another. The ... Adhesive tapes have a coating of pressure-sensitive adhesive. See I. Skeist, ed., Handbook of Adhesives (1962) N. A. de Bruyne ... term adhesive cement is sometimes used in place of adhesive, especially when referring to a synthetic adhesive. Animal glue, a ...
  • They are safe on skin as they are made of medical-use adhesive tape glue which Ophthalmologist tested and Hypoallergenic approved. (
  • Adhesive" as a general term includes cement , mucilage, glue , and paste-terms that are often used interchangeably for any organic material that forms an adhesive bond. (
  • adhesive: glue Overview of how glue and other adhesives work. (
  • Animal glue, a gelatin made from hides, hooves, or bones, was probably known in prehistoric times it remained the leading adhesive until the 20th cent. (
  • Other adhesives derived from animal and vegetable sources include blood glue, casein glue, fish glue, rubber adhesives, and cellulose derivatives. (
  • Robert S. Miller, vice president and general manager of the consumer product division for Franklin International (manufacturer of a wide range of adhesives), sympathizes with the average glue-buyer. (
  • August, 2017) - Glue Dots International is showcasing its adhesives, hand-held applicators and semi-automated benchtop dispensers, which are designed for easy application and convenient storage of Glue Dots® Brand Adhesives, in booth No. S-5931 at PACK EXPO 2017, Sept. 25-27, at the Las Vegas Convention Center in Las Vegas, Nevada. (
  • 3M engineered this versatile spray adhesive to dry quickly and to produce a smooth glue line that won't become brittle with age. (
  • Adhesive may be used interchangeably with glue, cement, mucilage, or paste, and is any substance applied to one surface, or both surfaces, of two separate items that binds them together and resists their separation. (
  • Thermal adhesive is a type of thermally conductive glue used for electronic components and heatsinks. (
  • A dermal adhesive (or skin glue) is a glue used to close wounds in the skin, as an alternative to sutures, staples or clips. (
  • The adhesive is marketed in glue sticks, glue tubes and in cans. (
  • An electrically conductive adhesive is a glue that is primarily used for electronics. (
  • Hydrophobic light-activated adhesive (HLAA) is a type of glue that sets in seconds, but only after exposure to ultraviolet light. (
  • He is a notable researcher in the United States in use of fibrin glue (a surgical adhesive used to create hemostasis). (
  • In 2005, Chemence Medical began manufacturing its own line of FDA-registered medical device products including Liquid Skin skin protectant, Derma+Flex liquid bandage, Derma+Flex gel tissue adhesive (CE marked), Salon Safe liquid bandage, Sure Close wound closure kit, Derma+flex QS gel tissue adhesive, Gluture veterinary glue, Exofin tissue adhesive, Exofin micro and Exofin Fusion skin closure system. (
  • Cyanoacrylate adhesives are sometimes known generically as instant glues, power glues or superglues (although "Super Glue" is a trade name). (
  • Wood glue is an adhesive used to tightly bond pieces of wood together. (
  • Animal glue, especially hide glue, was the primary adhesive of choice for a great many types of woodworking, including furniture and lutherie, for many centuries. (
  • Glue, tape, and other adhesives are not permitted. (
  • They believe the glue to have applications as a biocompatible medical adhesive, for instance to repair shattered bones. (
  • We can borrow from one technology, such as one of our vast tape formulations, combine it with cross-linking chemistry and create a fast-tack, strong holding water-based adhesive. (
  • We infused viscoelastic foam with our unique adhesives to create an amazingly strong, easy-to-use bonding tape. (
  • Today, 3M Medical Materials and Technologies offers a wide range of medical-grade tape, adhesive and film components used by medical device manufacturers around the world. (
  • Many times, if you manage to get the tape off, the adhesive leaves a gooey residue behind and you are stuck with a mess that is tricky to remove. (
  • If tape adhesive is clinging to your last nerve, here are some ways to get unstuck. (
  • To remove adhesive tape from wall paper, you can either hold your hairdryer 3 or 4 inches away from the tape or put a white blotter against the tape and hold a warm iron to it. (
  • Gently pull the tape as the heat softens the adhesive. (
  • To remove adhesive tape from photographs, saturate the taped area with lighter fluid. (
  • a bandage consisting of a small pad of gauze affixed to a strip of adhesive tape. (
  • Please complete the form below to receive your tape or adhesives sample or enter your question or comment below. (
  • Feb. 11, 2011 -- An experimental, noninvasive test that relies on a special adhesive tape to collect cells from suspicious skin lesions can accurately identify both early and advanced melanomas, researchers say. (
  • With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. (
  • we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application. (
  • End-user modding heatsinks may be supplied with thermal (tape) adhesive attached. (
  • The pressure-sensitive tape is self-adhesive and water resistant, and is elastic so that there is no risk of cutting off circulation to the legs. (
  • 3. The method of claim 1 wherein the amount of said cyclodextrin added to polymer adhesive and/or polymer sealant material is about 1 to about 30 parts per 100 parts by weight of said polymer material. (
  • The higher temperatures associated with emerging smaller headlamp designs require an adhesive/sealant which can resist both high and low temperature extremes. (
  • PVC Trim Adhesives consist of slow curing one-part urethane-based sealant. (
  • Henkel expands portfolio of bonding and sealing products for automotive lighting applications MADISON HEIGHTS, Mich., Sept. 3 -- Henkel has increased its lighting adhesive and sealant product offerings with the addition of the National Adhesives lighting adhesives as a result of Henkel's acquisition of the company. (
  • Chemence is a supplier of photopolymer and commercial printers to the flexographic industry in the US and Europe, as well as the primary sealant supplier to British Gas, and a primary supplier of private-label adhesives to companies including Tesco, 3M, Bostik, and Bondo. (
  • 4. An adhesive bead according to claim 3 wherein said copolymer comprises the reaction product of one or more acrylic acid esters of a non-tertiary alcohol having from 1 to 18 carbon atoms and a polar monomer copolymerizable with the acrylic acid ester. (
  • 6. An adhesive bead according to claim 5 wherein the acrylic acid ester is selected from the group consisting of isooctyl acrylate, isononylacrylate, 2-ethylhexyl acrylate, decyl acrylate, dodecyl acrylate, n-butyl acrylate, hexyl acrylate, and mixtures thereof. (
  • 8. An adhesive bead according to claim 4 wherein said core comprises about 80% acrylic acid ester by weight and about 20% polar monomer(s) by weight. (
  • 10 . The adhesive according to claim 1 , wherein said alkyl (meth)acrylate monomer are selected from (meth)acrylic acid ester of a non-tertiary alkyl alcohol of about 1 to about 12 carbons. (
  • 16 . The adhesive according to claim 2 wherein said ethylenically unsaturated carboxylic acids are selected from acrylic acid, methacrylic acid, and itaconic acid. (
  • It is a pressure sensitive acrylic adhesive coated on top of a polyester spunlace fabric. (
  • It is sometimes referred to as "the blue tube," in contrast to "the purple tube," the acrylic B72 Restoration Adhesive also manufactured by the company. (
  • Araldite is a registered trademark of Huntsman Advanced Materials (previously part of Ciba-Geigy) referring to their range of engineering and structural epoxy, acrylic, and polyurethane adhesives. (
  • ASA is compatible with acrylic-based adhesives. (
  • Only since the last century has the development of synthetic adhesives accelerated rapidly, and innovation in the field continues to the present. (
  • The company manufactures and markets a variety of Synthetic Adhesives based on Polychloroprene, Polyurethane, Epoxy, EVA, Lamination and other Elastomers. (
  • the synthetic adhesives industry has been impacted by environmental concerns and health and safety issues relating to hazardous ingredients, volatile organic compound emissions, and difficulties in recycling or re mediating adhesives derived from petrochemical feedstocks. (
  • Rising oil prices may also stimulate commercial interest in biological alternatives to synthetic adhesives. (
  • Kreibich, R.E. Condensed tannin-resorcinol adducts and their use in wood-laminating adhesives: an exploratory study. (
  • Hemingway, R.W. Condensed tannin-sulfonate derivatives in cold-setting wood-laminating adhesives. (
  • Rich comes to Ellsworth Adhesives with over 20 years of lighting sales and account development experience with companies such as General Electric, Technical Consumer Products, Howard Industries and most recently his own consulting firm J&L Consulting which specialized in commercializing new LED technology. (
  • Ellsworth Adhesives is a distributor of adhesive products and equipment. (
  • Â For more than 30 years, Air Products (NYSE: APD) has been a leading supplier of epoxy curing agents and accelerators to the adhesives and composites industries. (
  • offers 3 qbond adhesives products. (
  • Qbond adhesives products are most popular in Central America, South America, and Africa. (
  • Do you want to show qbond adhesives or other products of your own company? (
  • The adhesives standards are instrumental in determining various applications of adhesives such as in electrical insulation, sealing materials, and materials used in lumber products and floor systems. (
  • Wood adhesives as a term can encompass many products for a variety of applications, but essentially these products are polymers designed for the joining of timber elements through application to the timber surfaces and binding them through either a chemical reaction or physical interlocking. (
  • The correct selection of adhesive can lead to a bond line within a wooden construction that is as strong as the timber that surrounds it and has lead to many products that can improve on the properties of solid timber. (
  • Because of the health risks some products manufactured using adhesives are regulated through European Standards and these set out permitted limits of formaldehyde release. (
  • Torrington, Connecticut - January 16, 2017 - Dymax Corporation, a leading manufacturer of adhesives to the disposable medical device industry, will exhibit in Booth #2159 at MD&M West, scheduled to take place February 5-8, 2018 at the Anaheim Convention Center in Anaheim, CA. Their newest products and technologies - including solvent free, USP Class VI, and ISO 10993 biocompatible. (
  • The findings are an advance toward a new generation of biobased adhesives and glues "" "green" glues that replace existing petroleum-based products for a range of uses. (
  • Image Caption: A sticky substance in spider webs may lead to the development of a new generation of biobased adhesives and glues that could replace some petroleum-based products. (
  • Most of the 3M™ Adhesive products are available in bulk for spray or roll-on application, as well as cost effective aerosols from the 15 oz. can to the 400 lb. canister. (
  • Hongsu Adhesive Products Industrial Co., Ltd. (
  • The attached bulletins represent just a few of the adhesive applications where our products excel. (
  • DriTac Flooring Products announces that DriTac 7700 Easy Clean 4-in-1 Premium Green" Sound Moisture Control MS Polymer Wood Flooring Adhesive can now be utilized to isolate old cutback adhesive residue for hardwood flooring installations. (
  • Engineered wood, also called composite wood, man-made wood, or manufactured board, includes a range of derivative wood products which are manufactured by binding or fixing the strands, particles, fibres, or veneers or boards of wood, together with adhesives, or other methods of fixation to form composite materials. (
  • Historically the choice of adhesives for woodworking has been animal based glues, especially hide glues which were manufactured from the rendering of animal skins. (
  • There are so many glues, adhesives and cements (the three terms are essentially synonymous) available today, it seems the adhesive manufacturers have tried to fill every seam in the market. (
  • The trend in the adhesive market is toward nonflammable, nontoxic glues. (
  • From a book Miller has written, ''Home Construction Projects with Adhesives and Glues'' (Franklin, $6.95), here are some of the more common adhesives with their properties and uses. (
  • 6. An adhesive material according to claim 1 wherein the weight ratio of solid rubber to tackifying resin is from 1:0.5 to 1:7. (
  • Lignin recovered from the hot-water extract of sugar maple ( Acer saccharum ) is used in this study to synthesize adhesive blends to replace phenol-formaldehyde (PF) resin. (
  • The molecular weight distribution of the lignin and the blends are characterized by size exclusion chromatography (SEC). The effect of pH (0.3, 0.65 and 1), ex situ furfural, and curing conditions on the tensile properties of adhesive reinforced glass fibers is determined and compared to the reinforcement level of commercially available PF resin. (
  • Araldite adhesive sets by the interaction of a resin with a hardener. (
  • Urea-formaldehyde resin adhesives feature a low effective cost, low cure temperatures, resistance to microorganisms and abrasion, and light color. (
  • Curing to hard, scratch-resistant surface via individual or combined use of UV light, visible light, and heat, Tru-Bond(TM) Dual Cure Adhesives produce protective, decorative, and dome coatings. (
  • Back then, the processing for polyethylene to make the sleeve backing was new technology and the adhesives used in sleeves were much the same as those used on pipeline coatings. (
  • Further, blowing agents are used with adhesive plastic materials in a hot melt adhesive. (
  • The invention provides a hot melt adhesive composition including a tubular reactor copolymer of ethylene and 5 to 20 mol % of comonomer units derived from an alkyl acrylate or alkyl methacrylate, wherein the copolymer has a melt index of at least 300 g/10 min. (
  • If desired, the hot melt adhesive can further include tackifiers, waxes, antioxidants and other desired additives. (
  • The invention further provides articles such as cartons, cases, trays, bookbindings or disposables including the hot melt adhesive compositions. (
  • 2. The hot melt adhesive composition of claim 1 , wherein the alkyl group of the alkyl acrylate or alkyl methacrylate is a linear or branched C 1 to C 12 group. (
  • 3. The hot melt adhesive composition of claim 1 , wherein the alkyl acrylate is selected from the group consisting of methyl acrylate, ethyl acrylate, n-butyl acrylate, iso-butyl acrylate, t-butyl acrylate, n-hexyl acrylate, 2-ethylbutyl acrylate, and 2-ethylhexyl acrylate. (
  • 4. The hot melt adhesive composition of claim 1 , wherein the alkyl acrylate is n-butyl acrylate. (
  • 5. The hot melt adhesive composition of claim 1 , further comprising a tackifier, and wherein said tackifier is present in an amount of from 5 to 60 percent by weight, based on the total weight of the composition. (
  • 8. The hot melt adhesive composition of claim 1 , further comprising a wax. (
  • 10. The hot melt adhesive composition of claim 9 , further comprising a plasticizer, an antioxidant, a pigment, or a mixture thereof. (
  • 11. The hot melt adhesive composition of claim 4 , having at least 5 mol % of n-butyl acrylate derived units, and from 5 to 60% by weight of a compatible tackifier, based on the total weight of the composition. (
  • 12. The hot melt adhesive composition of claim 11 , wherein the copolymer comprises 6 to 14 mol % n-butyl acrylate derived units. (
  • Shanghai Zhengye Hot Melt Adhesive Co., Ltd. (
  • Hangzhou Ren He Hot Melt Adhesive Co., Ltd. (
  • As an example, for small diameter flow lines operating at ambient temperatures, a soft mastic-based adhesive may be chosen, while on large diameter pipelines operating at higher temperatures, a hard, semi-crystalline hot-melt adhesive is used. (
  • Implicit in the formation of an acceptable adhesive bond is the ability of the adhesive to wet and spread on the adherends being joined. (
  • The standards also help to identify adhesive bond or joint mechanical properties which include strength, creep, fracture, and fatigue. (
  • Frank Vinluan This flexible tubing was bonded with a Henkel cyanoacrylate adhesive developed to offer flexibility, rapid fixture, and high bond strength. (
  • Used in the fabrication of wood components such as structural finger joints, I-joists, laminated veneer lumber, vertical studs and glulam beams, Isoset adhesives are also used to bond sandwich panel components. (
  • 3M™ SS HMS Adhesive creates a strong bond for attaching decorative laminate, headliners and soft foams. (
  • Although there are available many solders which permit joining two electricity conducting elements without impeding flow of electrical current at the bond, the use of organic adhesives for this purpose is usually disadvantageous because the resinous components of organic, self-drying adhesives generally posses the property of impeding, rather than conducting, the flow of an electrical'current. (
  • Still another object is the provision of "ice a method of joining together electricity conducting units by means of an organic adhesive to form a tenacious bond of low electrical resistivity. (
  • Taixing City Super Bond Adhesive Co., Ltd. (
  • Thus, adhesives heretofore have generally comprised homogeneous solutions requiring solvent evaporation for "set up" and in their use it has been customary, and in many cases essential, after application of an adhesive to allow partial evaporation of solvent before articles to be adhered are placed together and then to apply heat and pressure to secure a good bond. (
  • The use of Araldite adhesive in architecture to bond thin joints of pre-cast concrete units was pioneered by Ove Arup in Coventry cathedral and the Sydney Opera House. (
  • At Coventry cathedral, Araldite adhesive was used to bond its columns and fins, while at Sydney Opera House, Araldite adhesive was used to bond the rib sections of the shells, since a traditional concrete joint would have slowed construction, as it would need 24 hours to cure before stressing. (
  • This dental material has good adhesive bond properties to tooth structure, allowing it to form a tight seal between the internal structures of the tooth and the surrounding environment. (
  • Apply new adhesive with a contact adhesive for vinyl treads or a contact or rubber flooring adhesive for rubber treads. (
  • Dendrite is a contact adhesive and rubber cement brand marketed in India and South Asia, mainly in Eastern India, Bangladesh and Bhutan. (
  • More recent attempts (during the past 5 years) carried out in the United States to develop cold-setting wood adhesives for end-jointing and laminating lumber for structural applications requiring exterior glueline quality indicate substantial promise for the use of conifer tree barks as partial substitutes for resorcinol. (
  • Structural adhesives also provide processing benefits, including the pre-treatment-free joining of carbon fiber, optimized open times and balanced mechanical properties regarding optimal stiffness and driving properties. (
  • Hybrid Adhesive features structural cyanoacrylate technology. (
  • The demand for adhesives that had a high degree of structural strength and were resistant to both fatigue and severe environmental conditions led to the development of high-performance materials, which eventually found their way into many industrial and domestic applications. (
  • Isoset™ structural adhesives are two-component systems consisting of a base emulsion polymer and a crosslinking agent. (
  • Oriented strand board (OSB) is a wood structural panel manufactured from rectangular-shaped strands of wood that are oriented lengthwise and then arranged in layers, laid up into mats, and bonded together with moisture-resistant, heat-cured adhesives. (
  • Glued laminated timber (glulam) is composed of several layers of dimensional timber glued together with moisture-resistant adhesives, creating a large, strong, structural member that can be used as vertical columns or horizontal beams. (
  • Cyanoacrylates are a family of strong fast-acting adhesives with industrial, medical, and household uses. (
  • Cyanoacrylates are mainly used as adhesives. (
  • Ellsworth Adhesives expands its North American team by adding Rich Turner as the lighting specialist. (
  • His knowledge and experience is a huge asset and will assist Ellsworth Adhesives in penetrating the emerging lighting market. (
  • Ellsworth Adhesives, a global distributor of adhesives, specialty chemicals and dispensing equipment, is pleased to announce the expansion of its North American team by adding Rich Turner as Lighting Specialist, a role in which he will be focused on creating new opportunities in the lighting industry. (
  • Rich will assume responsibility for developing Ellsworth Adhesives' lighting program and act as the key interface and essential resource for the company's Engineered Sales Reps, supplier partners, and lighting customers. (
  • Rich will report directly to Andre Rivard, General Sales Manager for the East Region at Ellsworth Adhesives. (
  • Jay Richardson, Director of Sales for the ESR group at Ellsworth Adhesives, stated, "We are very excited to have Rich as part of the team. (
  • Roger Lee, Vice President and General Manager of Ellsworth Adhesives North America, said, "We are excited to have found a person of this caliber and background to fill this new position. (
  • For more information on Ellsworth Adhesives, visit or call 1.800.888.0698. (
  • Ellsworth Adhesives can be contacted directly at 1-800-888-0698 or by visiting . (
  • 07/05/12 - 3M spray adhesives available from Harry Daines Pty Ltd are bulk supplied in 3M cylinders to offer the convenience of aerosol adhesives and the productivity of a bulk system. (
  • 2. An adhesive material according to claim 1 wherein the A-B-A block copolymer component of the cross-linked solid rubber comprises a styrene-olefin-styrene or styrene-alkane-styrene block copolymer. (
  • 3. An adhesive material according to claim 1 or claim 2 wherein the cross-linked solid rubber comprises 15 to 50% by weight of A-B diblock copolymer. (
  • 4. An adhesive material according to claim 1 wherein the A-B block copolymer component ofthe solid rubber comprises a styrene-butadiene, styrene isoprene or hydrogenated styrene-diene copolymer. (
  • 6. A sheet material as claimed in claim 1 in which the adhesive layer is a polyvinyl alkylether adhesive or an acrylate ester copolymer adhesive and has a thickness of 20 to 40 μm. (
  • 3. An adhesive bead according to claim 1 wherein said pressure sensitive adhesive material comprises a copolymer which is the reaction product of a functional monomer copolymerizable with a monomer selected from the group consisting of alkyl acrylates, alkyl fumarates and alkyl maleates. (
  • 9. An adhesive bead according to claim 3 wherein said copolymer comprises a functional monomer copolymerizable with a monomer selected from the group consisting of dioctyl maleate, dibuyl maleate, dioctyl fumarate, and dibutyl fumarate. (
  • 16. An adhesive bead according to claim 15 wherein the thermoplastic organic copolymer comprises the reaction product of a material selected from the group consisting of vinyl group-containing monomers and acrylate group-containing monomers and a polar comonomer copolymerizable with said material. (
  • 1 . An adhesive comprising a copolymer of a) monomer units having pendent biphenyl groups and b) alkyl (meth)acrylate monomer units. (
  • 2 . The adhesive of claim 1 , wherein said copolymer further comprises c) acid functional monomer units. (
  • Novel aqueous adhesive and coating compositions composed of (1) an aqueous emulsion (latex) or dispersion of a polymer or interpolymer of one or more vinyl monomers such as an emulsion of a copolymer of vinyl acetate and butyl acrylate and (2) an aqueous emulsion or dispersion of a polyisocyanate which. (
  • 4. A dressing according to claim 2 in which the continuous moisture vapor transmitting adhesive layer is an acrylate ester copolymer. (
  • Inorganic substances such as portland cement also can be considered adhesives, in the sense that they hold objects such as bricks and beams together through surface attachment, but this article is limited to a discussion of organic adhesives, both natural and synthetic . (
  • The term adhesive cement is sometimes used in place of adhesive, especially when referring to a synthetic adhesive. (
  • From the specific standpoint the adhesive in accordance with this invention will comprise an aqueous emulsion of a substantially water-immiscible nitrocellulose cement of high solids content in water, in which nitrocellulose cement, or an ingredient thereof, will be emulsified as a distinct disperse phase, the emulsion being characterized by relatively very low water content. (
  • In optics, an index-matching material is a substance, usually a liquid, cement (adhesive), or gel, which has an index of refraction that closely approximates that of another object (such as a lens, material, fiber-optic, etc. (
  • The electric conductivity is caused by a component that makes ca. 80% of the total mass of an electrically conductive adhesive. (
  • This conductive component is suspended in a sticky component that holds the electrically conductive adhesive together. (
  • One could fix a defective conductor on a printed circuit board using an electrically conductive adhesive. (
  • In the same way, one could fix a defective rear windscreen heater on a car using an electrically conductive adhesive. (
  • Araldite® adhesive covers a broad range of applications and offers both production and performance benefits to industrial, consumer and construction markets. (
  • Many of the wood adhesives (especially those used in industrial applications) contain formaldehyde, a known carcinogen. (
  • Archival adhesives are acid-free and do not yellow or degrade over time, so they're perfect for fine art applications. (
  • DA 150 Series Die Attach Adhesives can be cured at 150°C. Adhesive is suitable for insulating and conductive die attach applications. (
  • 127-41 UV Curable Conductive Pressure Sensitive Adhesive is suitable for printed and medical electronics, RFID, touch screens and electronic circuitry applications. (
  • Conductive adhesives are widely used in electronic packaging applications such as die attachment and solderless interconnections, component repair, display interconnections, and heat dissipation. (
  • Adhesive and Dispenser are optimized for medical applications. (
  • Richard Garner and Steve Lack, "On the axioms for adhesive and quasiadhesive categories", Theory and Applications of Categories, Vol. 27, 2012, No. 3, pp 27-46. (
  • such adhesives have applications in electronics. (
  • Learn more about body worn medical adhesives. (
  • Recent studies of 3M's medical adhesives evaluated skin wear time and more. (
  • The process for making the improved adhesive involves preparing the rubber-containing amic acid prepolymer by chemically reacting an amine-terminated elastomer and an aromatic diamine with an aromatic dianhydride with which a reactive chain stopper anhydride has been mixed, and utilizing solvent or mixture of solvents for the reaction. (
  • These are then organized into reactive and non-reactive adhesives, which refers to whether the adhesive chemically reacts in order to harden. (
  • The 1980s brought about the addition of a line of micro anaerobic adhesives. (
  • Anaerobic adhesives perform poorly with ASA. (
  • In all cases of conductive filler addition, the planar resistivity levels for the composite adhesive films increased when the film thickness was reduced. (
  • 10. An electrically active display according to claim 9 wherein at least the portion of the adhesive layer covering the at least one rear electrode is conductive. (
  • Electrically conductive adhesives can be used to paint the inner surface of plastic boxes containing electronic devices. (
  • Electrically conductive adhesives are used in scanning electron microscopy (SEM) to fix and ground the sample to avoid electrostatic charging of the surface. (
  • Handbook of Adhesives (1962) N. A. de Bruyne and R. Houwink, ed. (
  • Selection of a suitable adhesive for a medical device is challenging because of the wide variety of adhesive types, performance characteristics, and an ever-expanding range of use scenarios. (
  • Researchers from the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) and Xi'an Jiaotong University in China have developed a new type of adhesive that can strongly adhere wet materials -- such as hydrogel and living tissue -- and be easily detached with a specific frequency of light. (
  • A self-adhesive stamp is a postage stamp with a pressure-sensitive adhesive that does not require moistening in order to adhere to paper. (
  • Direction-dependence is an important and fundamental property of adhesive structures that are able to rapidly and controllably adhere during locomotion. (
  • 14. An adhesive bead according to claim 13 wherein said thermoplastic organic homopolymer comprises the polymerization product of a material selected from the group consisting of vinyl group-containing monomers and acrylate group-containing monomers. (
  • 2. An adhesive bead according to claim 1 wherein the pressure sensitive adhesive material is derived from a material selected from the group consisting of polyacrylates, vinyl ether polymers, silicone pressure sensitive adhesives, natural rubbers, styrene-butadiene-styrene block copolymers, elastomeric rubbers, and blends of these materials. (