Finally, the mixed solution pH was adjusted to 10 with 0.1mol·L-1 sodium hydroxide (NaOH). (freiborne.com)
Sodium hydroxide (also known as lye and caustic soda) or commonly labeled as Caustic soda, lye, Sodium hydroxide. (healthyplanetproducts.net)
The alkaline detergents typically contain a source of alkalinity such as an alkali metal hydroxide, alkali metal silicate, alkali metal carbonate or other base component. (justia.com)
Basekim Caustic soda flakes is an important chemical with wide applications in many industries which known as some other names like sodium hydroxide, lye, caustic and etc in different markets and with have various purities and types in two different shapes liquid and solid is supplying by BASEKIM company to all over the world. (basekim.com)
Base kim caustic soda is a highly hydroxide substance that is use to neutralize acids and make sodium salts. (basekim.com)
Sodium hydroxide physically is a white crystalline like snow, odorless and solid that absorbs moisture from the air. (basekim.com)
More than 95% production capacity of chlorine and approximately 100% of the production capacity of cadmium (sodium hydroxide) is based on the hydrolysis of salt water. (basekim.com)
In this process, a solution of sodium chloride (salt water) is decomposed electrically to elemental chlorine and a solution of sodium hydroxide and elemental hydrogen. (basekim.com)
This product in the Kraft process or Sodium Hydroxide in soda pulping are use to break the lignin bonds of wood being process into pulp for papermaking. (basekim.com)
Many plant materials are very tough and require boiling in sodium carbonate (soda ash) or caustic soda (lye) at ph 12-14 to accomplish. (basekim.com)
Chloride2
After air drying at room temperature for 24 h, the corrosion resistance of untreated and treated rebar was evaluated by electrochemical tests in a 3.5% aqueous sodium chloride (NaCl) solution, a salt spray test (SST), and a salt immersion test. (freiborne.com)
a liquid production method using sodium chloride as a raw material is a multiprocessing process today, there are generally three commonly use methods to produce it. (basekim.com)
Sulfate2
Quality of Parameter Number Name of parameters Standard I II III i ii i ii 1 Sodium sulfate(Na2SO4)% 99.3 99.0 98.0 95.0 90.0 2 Water-fast,% 0.05 0.05 0.10 1.0 2.0 3 Calcium and Magnesium (Mg)% 0.10 0.15 0.30 0. (colorfulspeckles.com)
Sodium lauryl sulfate (SLS) and sodium laureth sulfate (SLES) or commonly labeled as Sodium lauryl sulfate, sodium laureth sulfate, sodium salt, ammonium laureth sulfate, sodium n-dodecyl sulfate, dodecyl sulfate, and sodium dodecyl sulfate. (healthyplanetproducts.net)
Anhydrous1
In addition to this, Trisodium Phosphate Anhydrous is offered in various packaging options at reasonable rates. (welcomechemicals.com)
Sulphate2
Providing you the best range of godrej alpha olefin sulfonates liquid, 46p godrej ginasul aos powder, godrej coco amido propyl betaine, sles paste 70%, basf sodium lauryl ether sulphate and detergent raw material with effective & timely delivery. (aksharchemicals.in)
The main raw materials required for the manufacturing of detergent powder & cake are acid slurry , soda ash , soda bicarb, sodium tripolyphosphate , soap stone, sodium silicate, sodium sulphate, synthetic dye etc. (aksharchemicals.in)
Sulfide1
It is also use in Kraft pulping process involves treatment of wood chips with a hot mixture of water, caustic soda , and sodium sulfide (Na2S), known as white liquor. (basekim.com)
Meta-silicate1
Never use cleaners containing bleach to clean such products - bleach is corrosive and will cause the product to pit.Avoid using cleansers and detergents that contain high percentages of free alkali or acid, tri-sodium phosphate, meta-silicate and chlorine. (seebaindustries.com)
Nitrite1
Some water-based coatings contain highly toxic substances, such as chromate or nitrite, some contain large amounts of phosphate, which causes severe environmental pollution due to the eutrophication, some contain lots of molybdate or noble metal and its inhibiting effect is not ideal. (freiborne.com)
Ascorbate1
The application of 10% sodium ascorbate, 10% alpha-tocopherol, 5% cranberry, or 0.0025% capsaicin solutions is not an effective step and should not be considered for the restorative protocols after non-vital bleaching. (bvsalud.org)
Dihydrogen phosphate1
Our enterprise successfully attained IS9001 Certification and European CE Certification of sodium dihydrogen phosphate molecular weight We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development. (cndbstco.com)