Loading...
  • gauges
  • I understand torque measurement is also possible using strain gauges in a Wheatstone bridge configuration, however I have consulted with a few of my professors and it seems that this method lacks the robustness and accuracy necessary for our application. (physicsforums.com)
  • Product range includes force gauges, test stands, torque gauges and analysers, hardness testers and analysis software. (ferret.com.au)
  • transducer
  • To measure the torque in the shaft using a torque transducer such as this one . (physicsforums.com)
  • To measure the torque by placing the tank on a freely rotating platform (such as a lazy Susan), attaching a force transducer to the lazy Susan, allowing the impeller to spin and measuring the tangential force necessary to keep the tank from rotating. (physicsforums.com)
  • 12/10/09 - Nextech, through its Australian distributor SI Instruments, has recently released the DTX torque tester networking system - truly unique transducer networking which saves time and is hassle-free. (ferret.com.au)
  • precise
  • The responses above answer your precise question - I agree that measuring the torque at the motor with a motor mount which allows for that is probably your best (budget) option. (physicsforums.com)
  • Battery
  • The principle behind the torque-battery is simple: high-tension coil-springs are stacked within a cylindrical housing, attached to the housing and to a common central shaft. (halfbakery.com)
  • By contrast a torque-battery driven screwdriver would be much cheaper to build and have a lower-parts count for the drive, ie: a gearbox. (halfbakery.com)
  • The torque battery for such a device would consist of a 2' long section of 1' pipe, to the inside of which are attached 12 spring-steel/kevlar laminate coil-springs, which attach to a central shaft The springs are separated by dividers, each of which has a bushing for the shaft at the center. (halfbakery.com)
  • Devices using the battery would thus need to be designed to cope with steadily decreasing torque. (halfbakery.com)
  • loud
  • Less than 30 seconds into Torque , a loud, rowdy biker-circus of a movie packed with high-speed, lowbrow motorcycle nonsense, and underscored by plenty of maximum-volume noise, a studly biker named Ford (played by Martin Henderson) disses a pair of angry hot rodders, popping a "screw you" wheelie as he burns up the road right between the two of them. (metroactive.com)
  • wound
  • A thin strip of amorphous magnetic alloy was bonded onto the surface of the shaft, formed into a chevron shape, then the torque applied to the shaft was detected from the difference in the inductance of the detection coil wound around the strip. (sae.org)
  • tools
  • Air tools and torque calibration services. (ferret.com.au)
  • 15/08/11 - Caps Australia, and Ingersoll Rand, presents the Impact Gun Torque Ratings to help workers properly understand the efficiency and power of the torque in their tools. (ferret.com.au)
  • It's apparently quite close to being released, and when it is there's absolutely no excuse to not use Torque because "there aren't any tools. (idevgames.com)
  • With the modern Intel Macs and the availability of software such as Parallels and Boot Camp the lack of Mac content editing tools is not such an obstacle to developing with Torque. (idevgames.com)
  • Power
  • I am also aware that I could calculate the torque using the equation P=2πτN (Power = 2π × torque × rotational speed), however this method lacks significant accuracy as well. (physicsforums.com)
  • The REPLACEMENT TORQUE CAMS are DYNO PROVEN to out power stock cams to over 7000 rpm. (google.com)
  • time
  • This find is unusual because it is the first time in which that a ribbon torc and flanged torc were found together. (unc.edu)
  • Probably I will have some time this weekend for starting the torque 4 stuff. (apache.org)
  • good
  • But the easiest way might be to use a DC electric motor to drive the stirrer, vary the voltage to adjust the RPM, then monitor the motor current which is a very good proxy for motor torque. (physicsforums.com)
  • Torque Drive Size Keep a Good Grip. (ebay.com)
  • So I think I've established that Torque is a good solution, but perhaps not optimized for smaller teams/timelines. (idevgames.com)
  • shaft
  • Hi Everyone, I am working on a project which requires me to determine the torque on the impeller shaft of stirred tank. (physicsforums.com)
  • Also, is there another way to measure shaft torque that I am not thinking of? (physicsforums.com)
  • You can measure the torque in the stirrer shaft, between the tank and the ground or between the stirrer mount and the strirrer drive. (physicsforums.com)
  • think
  • The makers of 'Torque' don't think so. (metroactive.com)
  • I think roughly the flexibility you get in the Torque products can be stated something like this (assuming the implementation effort is not a factor to consider, which is a rash consideration! (idevgames.com)
  • show
  • Acceleration of the fluid indeed won't show up at the wall, but once it reaches steady state viscous friction wlll make torque show up there. (physicsforums.com)
  • system
  • Torque PBS is an open source version of Portable Batch System, and it controls the running of jobs on a HPC cluster. (softpanorama.org)
  • make
  • To get a feel for the maximum value of torque , use the flat side of the pick to push all the pins down, and try applying enough torque to make the pins stay down after the pick is remove d. (everything2.com)
  • made
  • The largest ribbon torc recorded, this piece was made by finely twisting a strip of gold twenty times. (unc.edu)
  • service
  • 02/09/11 - Bonfiglioli Transmission (Aust) has manufactured a new generation of HD Series large industrial drives to assist their Drives Service Centre in producing reliable torque densities. (ferret.com.au)
  • industrial
  • 08/04/10 - The Kistler Evaluation Instrument CoMo Torque Type 4700A, available in Australia and New Zealand through SI Instruments, is ideal for industrial use and for research and development applications. (ferret.com.au)
  • project
  • hello, about: Firebird & Torque Before starting with an project I'd like to know if there are any big known obstacles with this comibnation. (apache.org)
  • stuff
  • I'd try do the following - create a torque 4 branch (leaving the torque 3 stuff as it is). (apache.org)
  • Early adopter stuff) Torque games crash on both of my Macs, but that's not a very scientific view of stability. (idevgames.com)