Chemicals and DrugsAnalytical, Diagnostic and Therapeutic Techniques and EquipmentPhenomena and ProcessesDisciplines and OccupationsTechnology, Industry, AgricultureInformation ScienceHealth Care
ElastomersSilicone ElastomersPlasticsPoloxalenePolymersDental ClaspsPolyestersOrthodontic RetainersMicrotechnologyInkResins, SyntheticCycloparaffinsDenture RetentionPrintingPeriodontal SplintsPoloxamerMicellesImmobilizationDenture DesignMaterials TestingOrthodontic Appliances, RemovablePolyurethanesNylonsPolymethyl MethacrylateRadiotherapy Setup ErrorsPolyethylene GlycolsOrthodontic Appliance DesignDecanoatesSurface PropertiesMicrofluidic Analytical TechniquesAlkenesDrug CarriersDimethylpolysiloxanesPliabilityPolyethylene TerephthalatesBiocompatible Materials
TPEsBlendsPolyurethanesRubbersPolymersElastomericPolyurethanePolypropyleneStyrene butadiene rubberPolymerVulcanizateOlefinPolystyreneCompoundsSEBSSBCsEthyleneResinResinsInvention2022MonomersPolybutadieneMeltRubberyTemperaturePermeabilityAdvantagesExtrusionPlasticsTriblockFillersMaterialsPropertiesRubberInjectionDashboardsMaterialTypicallyMadeProductProcessOrganicStrengthSoftMarketNature
TPEs7
  • Thermoplastic elastomers or TPEs are a type of polymers that can be stretched and come back in their original shape by providing different temperature conditions. (flexishinepolyblends.com)
  • Elastomers and TPEs do not need vulcanization or curing, it can be processed by conventional techniques such as injection moulding, blowing, extrusion moulding. (flexishinepolyblends.com)
  • The other is a group of thermoplastics known as thermoplastic elastomers (TPEs), which can be processed like common rigid thermoplastics but which offer rubber-like properties. (3erp.com)
  • What are thermoplastic elastomers (TPEs)? (3erp.com)
  • Structurally, TPEs comprise thermoplastic hard blocks, interconnected by elastomeric mid-blocks. (nynas.com)
  • Many polymer companies are filling the need with new materials like thermoplastic elastomers (TPEs). (medicalplasticsnews.com)
  • Thermoplastic Elastomers, or TPEs, are a premier choice of soft, flexible materials due to their robust properties, cost effectiveness, and design optionality. (nexeoplastics.com)
Blends5
  • Kraton polymers are always used in blends with various other ingredients like paraffinic oils, polyolefins, polystyrene, bitumen, tackifying resins, and fillers to provide a very large range of end-use products ranging from hot melt adhesives to impact-modified transparent polypropylene bins, from medical TPE compounds to modified bitumen roofing felts or from oil gel toys (including sex toys) to elastic attachments in diapers. (wikipedia.org)
  • Examples include the physical blends of thermoplastic olefins ("TPO") such as polypropylene with ethylene-propylene copolymers, and similar blends wherein the ethylene-propylene, or ethylene-propylene-diolefin phase is dynamically vulcanized so as to maintain well dispersed, discrete soft phase particles in a polypropylene matrix. (allindianpatents.com)
  • The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO. (knowde.com)
  • As a global leader in compounding, Teknor Apex offers one of the broadest portfolios of TPE technologies in the industry, including styrenic block copolymer (SBC) compounds, polyolefin blends (TPE-O or TPO), thermoplastic vulcanizates (TPE-Vs or TPVs), polyurethane compounds (TPE-U or TPU), and other specialty blends. (nexeoplastics.com)
  • The relatively high phosphite content of the blend makes it ideal for use as a melt processing stabilizer in polyolefins such as polypropylene, polyethylene, polyolefin copolymers and blends, and TPO's. (vanhornmetz.com)
Polyurethanes4
Rubbers5
  • The capability of converting weak rubbers in tough elastomers made us the best Thermoplastic Elastomers Manufacturer in India. (flexishinepolyblends.com)
  • TPE, or thermoplastic elastomers, are also referred to as thermoplastic rubbers. (vandenrecycling.com)
  • Thermoplastic elastomers or thermoplastic rubbers are a class of thermoplastics exhibiting both thermoplastic and elastomeric material properties. (3erp.com)
  • Successfully marrying the properties of plastics and rubbers, thermoplastic elastomers (TPE) are used in everything from car dashboards to toothbrushes and the soles of our shoes. (nynas.com)
  • Kuraray's Septon is a series of high-performance, thermoplastic rubbers that are based on the company's SEEPS technology. (medicalplasticsnews.com)
Polymers9
  • This post will provide an insight into 'TPE', a reference to a class of thermoplastic polymers. (vandenrecycling.com)
  • They are an engineering class of co-polymers or a material made from a blend of a polymer and a rubber - offering both thermoplastic and elastomeric properties. (vandenrecycling.com)
  • Kraton is the trade name given to a number of high-performance elastomers manufactured by Kraton Polymers, and used as synthetic replacements for rubber. (wikipedia.org)
  • Kraton employees accept an ASC Innovation Award Kraton polymers are styrenic block copolymer (SBC) consisting of polystyrene blocks and rubber blocks. (wikipedia.org)
  • If Kraton polymers are heated substantially above the Tg of the styrene-derived blocks, that is, above about 100 °C, like 170 °C the physical cross-links change from rigid glassy regions to flowable melt regions and the entire material flows and therefore can be cast, molded, or extruded into any desired form. (wikipedia.org)
  • AERAFIN TM polyolefin polymers are compatible with many tackifying resins, which opens up many formulation options. (synthomer.com)
  • The best commercially known class of TPE polymers are the styrenic block copolymers (SBC), typically linear triblock polymers such as styrene-isoprene-styrene and styrene-butadiene-styrene, the latter of which when hydrogenated become essentially styrene-(ethylene-butene)-styrene block copolymers. (allindianpatents.com)
  • U.S. Patent 5,391,629 describes thermoplastic elastomer compounds comprising tapered and block linear polymers from ethylene and alpha-olefin monomers. (allindianpatents.com)
  • It is a highly effective antioxidant for the stabilization of elastomers (especially EPDM and polybutadiene), polyolefins (especially in pipe and in wire & cable grades), styrenic polymers, PVC, hot melt adhesives and in lubricants. (vanhornmetz.com)
Elastomeric4
  • Thermoplastic elastomers is known as thermoplastic rubber, are materials with elastomeric and thermoplastic characteristics. (strategymrc.com)
  • Thermoplastic elastomers have the desirable properties of elastomeric materials, such as the tactile feel, damping, and low temperature properties. (nynas.com)
  • In these, the thermoplastic block is made of polystyrene interconnected by the elastomeric mid-blocks such as butadiene or isoprene rubber. (nynas.com)
  • These types of copolymers can be useful as thermoplastic elastomer ("TPE") compositions due to the presence of "soft" (elastomeric) blocks connecting "hard" (crystallizable or glassy) blocks. (allindianpatents.com)
Polyurethane2
  • Thermoplastic elastomers are used widely in 3D printing, specifically TPU or thermoplastic polyurethane, and is used to print stoppers, springs, phone cases, and more. (xyzworkshop.com)
  • Composite Elements, Comprising Nonwoven Thermoplastic Polyurethane Fabric - This invention relates to composite elements comprising a polyurethane foam (i), a nonwoven of thermoplastic polyurethane (ii) and if appropriate a covering layer (iii), and also to a process for their production and to the use of this invention's composite elements as seats or carpets. (patentsencyclopedia.com)
Polypropylene6
  • You get styrenic block copolymer TPE compounds (TPE-S), Thermoplastic Olefin (TPE-O) compounds which are made with polyolefin (polypropylene), and an elastomer called EPDM. (xyzworkshop.com)
  • This TPE has excellent miscibility with polypropylene (PP) and has high affinity to polyolefins and styrenics, making it extremely transparent and easy to process. (medicalplasticsnews.com)
  • A thermoplastic elastomer is provided comprising a branched olefin polymer having crystalline sidechains and an amorphous backbone wherein at least 90 mole percent of the sidechains are isotactic or syndiotactic polypropylene and at least 80 mole percent of the backbone is atactic polypropylene. (allindianpatents.com)
  • Examples are provided of linear thermoplastic elastomers having hard blocks of high density polyethylene or isotactic polypropylene and soft blocks of ethylene-propylene rubber. (allindianpatents.com)
  • Japanese Early Publication H4-337308 (1992) describes what is said to be a polyolefin copolymer product made by polymerizing propylene first so as to form an isotactic polypropylene and then copolymerizing the polypropylene with ethylene and propylene, both polymerizations in the presence of an organoaluminum compound and a silicon-bridged, biscyclopentadienyl zirconium dihalide compound. (allindianpatents.com)
  • This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. (knowde.com)
Styrene butadiene rubber1
  • It is a highly effective antioxidant for unsaturated elastomers such as polybutadiene, polyisoprene, styrene-butadiene rubber, and styrenic block copolymers such as SIS and SBS. (vanhornmetz.com)
Polymer9
  • The benefits of thermoplastic elastomers are the ability to stretch to moderate elongations and return to its near original shape, creating a longer life and better physical range than many other polymer materials. (vandenrecycling.com)
  • The tri-block with polystyrene blocks at both extremities linked together by a rubber block is the most important polymer structure observed in SBC. (wikipedia.org)
  • In short, TPE is a polymer material that has the characteristics of thermoset vulcanized rubber and thermoplastic. (xyzworkshop.com)
  • It contains an elastomer that gives it its elastic properties and another polymer that reinforces its strength. (xyzworkshop.com)
  • Found in numerous applications and everyday goods, TPE materials are formulated compounds containing a TPE polymer and other components such as a polyolefin, filler, antioxidative additives and a process oil. (nynas.com)
  • The polymer structure of Hybrar also ensures relatively good oxygen and moisture permeability compared to other elastomers. (medicalplasticsnews.com)
  • The hard blocks bind the polymer network together at typical use temperatures. (allindianpatents.com)
  • However, when heated above the melt temperature or glass transition temperature of the hard block, the polymer flows readily exhibiting thermoplastic behavior. (allindianpatents.com)
  • 15 Bio-inspired Complex Block Copolymers/Polymer Conjugates and Their Assembly, Markus Antonietti, Hans G. Börner, and Helmut Schlaad. (chemtec.org)
Vulcanizate1
  • Then you get thermoplastic elastomer vulcanizate or TPV compounds that are vulcanized or crosslinked giving them improved resistance to heat deformation and higher compressive strength. (xyzworkshop.com)
Olefin1
  • Kolon Industries SUKOREZ® SU-640 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. (knowde.com)
Polystyrene3
  • Like its styrene content is increased in the polystyrene elastomer then they change itself from weak rubber to strong elastomers. (flexishinepolyblends.com)
  • The glass transition temperature (Tg) of the polybutadiene blocks is typically −90 °C and Tg of the polystyrene blocks is +100 °C. So, at any temperature between about −90 °C and +100 °C Kraton SBS will act as a physically crosslinked elastomer. (wikipedia.org)
  • The polystyrene blocks form domains of nanometre size in the microstructure, and they stabilize the form of the molded material. (wikipedia.org)
Compounds1
  • The mechanical strength of TPE compounds varies and depends on the hardness of the individual thermoplastic elastomer type. (xyzworkshop.com)
SEBS2
  • SEBS and SEPS due to their polyolefinic rubber nature present excellent compatibility with polyolefins and paraffinic oils. (wikipedia.org)
  • Kuraray's Septon 4000 series combines the strength of SEBS (styrene ethylene butylene styrene) elastomers with the softness expected of SBS (styrene butadiene styrene) and SIS (styrene isoprene styrene) elastomers. (medicalplasticsnews.com)
SBCs2
  • For several decades, the medical industry has relied upon styrenic block copolymers (SBCs), a type of TPE, for use in a range of medical products. (medicalplasticsnews.com)
  • Microspec selected two styrene butadiene block copolymers (SBCs), from Styrolution, Aurora, IL, because of their ease of processing and low drug absorption rates. (medicaldesignbriefs.com)
Ethylene4
  • Styrene Ethylene Ethylene-Propylene Styrene (SEEPS) grades are comprised of copolymers with both isoprene and butadiene in the midblock. (medicalplasticsnews.com)
  • 6 Coordination Polymerization: Synthesis of New Homo- and Copolymer Architectures from Ethylene and Propylene using Homogeneous Ziegler-Natta Polymerization Catalysts, Andrew F. Mason and Geoffrey W. Coates. (chemtec.org)
  • Nipoflex® 710 is an Ethylene Vinyl Acetate Copolymer (EVA) material. (knowde.com)
  • It is primarily recommended for use in polyethylene and ethylene-copolymers such as ethylene-vinyl acetate copolymers. (vanhornmetz.com)
Resin1
  • UNI-REZ 110 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. (knowde.com)
Resins2
  • Among the key reasons Microspec selected these particular styrenic resins was that they carried supplier guarantees of long-term supply and notification of change of up to 12 months. (medicaldesignbriefs.com)
  • BNX 565 is also useful for the stabilization of hot melt adhesives (especially those derived from unsaturated elastomers) and rosin ester tackifier resins. (vanhornmetz.com)
Invention1
  • The present invention relates to a process for producing a thermoplastic elastomer composition. (allindianpatents.com)
20221
  • According to Stratistics MRC, the Global Thermoplastic Elastomers Market is accounted for $24.70 billion in 2022 and is expected to reach $40.52 billion by 2028 growing at a CAGR of 8.6% during the forecast period. (strategymrc.com)
Monomers2
  • Lastly, there is thermoplastic elastomer urethane (TPU) based on urethane monomers which are used for outdoor footwear soles. (xyzworkshop.com)
  • It is particularly useful for the stabilization of plastics and elastomers derived from butadiene and other dienes, for example polybutadiene and copolymers of polybutadiene and other monomers. (vanhornmetz.com)
Polybutadiene2
  • The rubber blocks consist of polybutadiene, polyisoprene, or their hydrogenated equivalents. (wikipedia.org)
  • If the rubber block consists of polybutadiene, the corresponding triblock structure is: poly(styrene-block-butadiene-block-styrene) usually abbreviated as SBS. (wikipedia.org)
Melt2
  • It is a high performance, multifunctional antioxidant developed for the stabilization of hot melt adhesives based on unsaturated copolymers (SIS, SBS, SBR, etc. (vanhornmetz.com)
  • It is a non-phenolic stabilizer system that is highly effective for the melt processing stabilization of polyolefins. (vanhornmetz.com)
Rubbery2
  • They are biphasic materials that possess the combined properties of semi-crystalline thermoplastics and soft elastomers and enable rubbery materials to be processed as thermoplastics. (xyzworkshop.com)
  • The role of the oil is to offer optimum plastification of the rubbery phase without inadequate interference with the hard (styrenic) phase. (nynas.com)
Temperature2
  • TPE has the high elasticity of thermoset vulcanized rubber at room temperature and good processability of thermoplastic at higher temperatures. (xyzworkshop.com)
  • The glass transition temperature (Tg) of the typical SBC TPE is equal to or less than about 80-90°C, thus presenting a limitation on the utility of these copolymers under higher temperature use conditions. (allindianpatents.com)
Permeability1
  • These elastomers have outstanding features such as abrasion resistance, heat and chemical resistance, low permeability, and increased adhesion. (strategymrc.com)
Advantages3
  • Both liquid silicone rubber and thermoplastic elastomers have their own unique advantages as injection molding materials. (3erp.com)
  • Thermoplastic elastomers have many advantages over other materials and so it is no wonder that they are so widely used. (xyzworkshop.com)
  • The styrenic materials also delivered other advantages, such as a low yellowness index, increased clarity vs. other materials, better run rates, and the elimination of material migration. (medicaldesignbriefs.com)
Extrusion2
  • Because they are thermoplastics, they are easier to manufacture than other rubber-like materials, being highly suited to injection molding and extrusion-style 3D printing. (3erp.com)
  • Extrusion is when the melted thermoplastic elastomer is pushed through a die of a specific shape to make a shaped product like foams or tubes. (xyzworkshop.com)
Plastics1
  • Typically, these parts are made from thermoplastics like ABS or PC, with different plastics offering different material properties to suit different applications. (3erp.com)
Triblock1
Fillers1
  • It is also ideal for use in polyolefins containing inorganic fillers (talc, glass fibers, etc. (vanhornmetz.com)
Materials1
  • One of the most important TPE materials is the so called Styrenic Block Copolymers (SBC or TPS). (nynas.com)
Properties6
  • Our thermoplastic Elastomers are available in various ranges, we have learned to alter the physical properties by adjusting the percentage of plastic content in the copolymer matrix. (flexishinepolyblends.com)
  • Kuraray's TPE products, Septon and Hybrar combine the elastic properties of rubber with the benefits of thermoplastics. (medicalplasticsnews.com)
  • Also, significant material savings - as much as 40% lower material usage and 40% weight reduction over competitive products - can be achieved while maintaining mechanical properties, compared with other thermoplastic elastomers. (medicalplasticsnews.com)
  • Additionally, an additive was used that successfully eliminated blocking and reduce the coefficient of friction properties in the tubing. (medicaldesignbriefs.com)
  • Both Styroflex and Styrolux possess the properties of a thermoplastic elastomer (S-TPE). (medicaldesignbriefs.com)
  • See, N. R. Legge, "Thermoplastic elastomer categories: a comparison of physical properties", ELASTOMERICS, pages 14-20 (Sept. 1991), and references cited therein. (allindianpatents.com)
Rubber2
  • The earliest commercial components using Kraton G (thermoplastic rubber) in the automobile industry were in 1970s. (wikipedia.org)
  • Of special importance is butyl rubber which is a copolymer of isobutylene with a small amount of isoprene. (allindianpatents.com)
Injection1
  • Although the liquid silicone molding process requires specialist equipment and requires longer molding cycles than thermoplastic injection molding, the unique benefits of LSR - such as its exceptional compression set - give it a number of important applications, from healthcare to industry. (3erp.com)
Dashboards1
  • They are used in applications where there is a requirement for increased toughness and durability over the conventional PP copolymers, such as automotive bumpers and dashboards. (hexpol.com)
Material3
  • This is the reason such a material is called a thermoplastic elastomer (TPE). (wikipedia.org)
  • Because they can be processed using conventional thermoplastic machinery, they are an attractive material to use across different industries. (xyzworkshop.com)
  • MONOXIALLY-ORIENTED AND ANNEALED FILMS WITH HIGH CROSS MACHINE TOUGHNESS AND RELATED PROCESS - A tape yarn, woven fabric or carpet backing produced from a polymeric film material formed from an impact copolymer and having increased toughness relative to films that are monoaxially-oriented at conventional temperatures. (patentsencyclopedia.com)
Typically1
  • These copolymers typically are prepared by sequential anionic polymerization or by chemical coupling of linear diblock copolymers. (allindianpatents.com)
Made1
  • If you take a look around your home or your local supermarket, chances are you will come into contact with products made out of thermoplastic elastomers. (xyzworkshop.com)
Product1
  • Shell Oil Company broaden the product portfolio of elastomers in the 1950s, under the technical leadership of Murray Luftglass and Norman R. Legge. (wikipedia.org)
Process1
  • Insertion, or coordination, polymerization of olefins can provide economically more efficient means of providing copolymer products, both because of process efficiencies and feedstock cost differences. (allindianpatents.com)
Organic1
  • The laminate layer can include at least one polyolefin functionalized with at least one unsaturated organic acid and/or at least one unsaturated organic acid anhydride, such as maleic anhydride. (patentsencyclopedia.com)
Strength1
  • Methods of fabricating high strength complex thermoplastic parts are desired. (justia.com)
Soft1
  • Monprene® thermoplastic elastomers add cushioning, protection, or a soft-touch grip to everyday consumer products. (nexeoplastics.com)
Market2
  • Growing automobile sector may drive the elastomers market in sealing systems, under hood components, exterior and interiors of vehicle. (strategymrc.com)
  • Thermoplastic elastomers or TPE were first introduced to the commercial market in the 1960's. (xyzworkshop.com)
Nature1