Loading...
  • ranges
  • This relationship becomes visible when the area under tensile strength ranges over one order of magnitude from 450 to 4624 mm2. (intechopen.com)
  • σ UTS along the [0 1 tensile direction ranges within 68.14 and 115.61 MPa, which, in the lowest case, is more than twice with respect to those measured for PbWO 4 (PWO), exhibiting a marked difference between the annealed and the not-annealed samples. (univpm.it)
  • load
  • The skin samples were stained for CD34 for vascular endothelial cells on day 7, and maximal wound tensile load was measured on days 7 and 14. (biomedsearch.com)
  • At the appropriate time, the specimens were subjected to a tensile load test (0.5 mm/min) until failure. (hindawi.com)
  • machine
  • Tensile strength testing is where we cut a certain number of pieces of fabric in a strip, because that's the only way we can fit them in the machine, 50mm across and a particular length. (sciencelearn.org.nz)
  • This paper requires the best possible machine direction strength and cross machine elongation. (wikipedia.org)
  • temperatures
  • inproceedings{ICRISET2017:Correlating_Tensile_Strength, author = {Kamlesh Dhansukhlal Bhatt and Nikul Patel and Vishal Mehta}, title = {Correlating Tensile Strength \textbackslash{}\& Peak Temperatures for Magnesium Alloy AZ91 during Friction Stir Welding Using Varied Tool Geometries \textbackslash{}\& FEA Tool}, booktitle = {ICRISET2017. (easychair.org)
  • failure
  • Test results reveal a relationship between the area under tensile stress at failure and the measured tensile strength. (intechopen.com)
  • Choice of correct analysis technique depends on both site conditions and the potential mode of failure, with careful consideration being given to the varying strengths, weaknesses and limitations inherent in each methodology. (wikipedia.org)
  • materials
  • A frequent mistake made in the mainstream media is to confuse strength and toughness, when comparing silk to other materials. (wikipedia.org)
  • While unlikely to be relevant in nature, dragline silks can hold their strength below −40 °C (−40 °F) and up to 220 °C (428 °F). As occurs in many materials, spider silk fibres undergo a glass transition. (wikipedia.org)
  • Water pressure acting in the pore spaces, fractures or other discontinuities in the materials that make up the pit slope will reduce the strength of those materials. (wikipedia.org)
  • Specific strength is of fundamental importance in the description of space elevator cable materials. (wikipedia.org)
  • chemical
  • Dual-activated cements provide long working time until they are exposed to light activation, and, due to the chemical polymerization process, their bond strength continues to increase over time [ 13 ]. (hindawi.com)
  • proven
  • However, its strength in model structures has been proven, and homes and small commercial buildings are being constructed. (wikipedia.org)
  • density
  • Because denier is a measure of the linear density, the tenacity works out to be not a measure of force per unit area, but rather a quasi-dimensionless measure analogous to specific strength. (wikipedia.org)
  • process
  • Corrugated fiberboard Gift wrapping Manila paper Paper bag Paper sack Derived from German Kraft, meaning "strength" in this context, due to the strength of the paper produced using this process. (wikipedia.org)