Tensile high density polyethylene. Medical search. Frequent questions

This paper studies and evaluates the mechanical properties of a blend of Polyethylene terephthalate (PET) and high-density polyethylene (HDPE). (iospress.nl)
It was shown that the tensile strength of the HDPE/PET composite decreased gradually as the PET percentage increased because the penetration of PET in the HDPE structure increased the elastic modulus of the PET ratio, leading to a decrease in tensile strength. (iospress.nl)
Base polymer for EPE foams range from Low-density polyethylene (LDPE) to High-density polyethylene (HDPE). (wikipedia.org)
usually the low pressure variant of the process is used, though the high pressure variant may be used for HDPE based EPE foams. (wikipedia.org)
Here the model polyolefin system of high-density polyethylene (HDPE) was exposed under controlled laboratory conditions to a range of temperatures (30 °C, 40 °C, 50 °C) and ultraviolet (UV) light intensities (153 W m-2, 61 W m-2, 38 W m-2, 15 W m-2, 8 W m-2, and 0 W m-2). (nist.gov)
In simple terms of expansion, HDPE is High-Density Polyethene. (selzerpolymers.com)
Just as the name suggests, HDPE has a higher density compared to other plastics and polymers. (selzerpolymers.com)
Hence, HDPE is inherently long-lasting as well as particularly tensile. (selzerpolymers.com)
Thermal and Thermo-mechanical Properties of Hemp-High Density Polyethylene (HDPE) Composite- Effect of Two Different Surface Modification, Composites Part B: Engineering , 44 (2013) pp 484-490. (purdue.edu)
Leakage-proof geomembrane (engineering), Thickness: 1.0mm hdpe geomembrane Roll width: 5.9m, maximum roll width is 8 meters Loading quantity / 40HC: 42 rolls,5.8m*100m , 24360 m2 Name hdpe gepmmebrane pond liner for irrigation system Thickness 0.3 / 0.5 / 0.75 / 1 / 1.25 / 1.5 / 2 mm Density 0.939 g/cm3 Material 100% PE virgin material Roll size 5.9m W * 50m L or customized Loading 40'GP/HC Application industry or engineering & usage: 1. (kitaitorg.ru)
Our new stress relief area rug is made from HDPE (high-density polyethylene) sheets that offer excellent impact resistance, are light weight, have low moisture absorption, and a high tensile strength. (endoftheroll.com)
zhonglu smooth geomembrane HDPE liner is made of finest quality high density polyethylene HDPE with specially formulated, virgin polyethylene resin, combined with specified quantity carbon black, antioxidant, anti-aging agent and UV resistance components, which makes our smooth geomembrane HDPE liner with excellent resistance to UV radiation and is suitable for exposed conditions. (geogridfactory.com)
HDPE (High-Density Polyethylene) and PP (Polypropylene) are both types of thermoplastic polymers that are widely used in various applications due to their combination of properties. (cambridgeseals.com)
HDPE generally has higher tensile strength compared to PP. Tensile strength refers to the maximum amount of tensile stress a material can withstand without breaking. (cambridgeseals.com)
HDPE also tends to have higher flexural strength compared to PP. Flexural strength measures a material's ability to resist deformation under a bending load. (cambridgeseals.com)
As the name suggests, HDPE has a higher density compared to PP. This higher density contributes to HDPE's higher strength and rigidity. (cambridgeseals.com)
HDPE has a higher degree of crystallinity compared to PP. This crystallinity contributes to HDPE's higher strength and stiffness. (cambridgeseals.com)
PP has a higher melting point and better resistance to higher temperatures compared to HDPE. (cambridgeseals.com)
In summary, HDPE tends to have higher tensile strength, impact resistance, and flexural strength compared to PP. HDPE is often chosen for applications requiring these properties, such as pipes, containers, and structural components. (cambridgeseals.com)
The advances of the polymer melt flow-induced crystallization behaviour and its influence on mechanical properties of high density polyethylene (HDPE) in micron injection (MI) were studied in the present paper. (brad.ac.uk)
The HDPE Tarpaulin is also used to protect poly house frames using notch straps or other tie-down devices. (welpackind.com)
The project summarized here focused on the stress cracking behavior and testing of geomembranes made from high-density polyethylene (HDPE). (epa.gov)
Because of the limitations of the currently used ASTM D 1693 "bent strip" test method for evaluating stress cracking behavior of HDPE geomembranes, a new test was developed-the notched, constant-tensile-load (NCTL) test. (epa.gov)
CNC HDPE machining has lots of obstacles however plays an irreplaceable duty in specific, detailed components manufacturing, prior to choosing a material for your item or beginning manufacturing, find out about HDPE properties and also usages, High-density polyethylene interpretation, along with just how to CNC machine HDPE. (mfg-space.com)
High-density polyethylene (HDPE), also called polyethylene high-density (PEHD), is a thermoplastic polymer that additionally can be called "alkaline" or "polythene" when made use of for HDPE pipes, normally the white or black solid product utilized in HDPE machining. (mfg-space.com)
As the name suggests, HDPE has a partially greater thickness than that of low-density polyethylene (LDPE), and also stronger intermolecular forces and also tensile toughness, which provides it greater particular toughness. (mfg-space.com)
The high strength-to-density proportion is the amazing feature of HDPE, its physical buildings will vary relying on the molding procedure that is made use of to make an HDPE component. (mfg-space.com)
Density of HDPE: 0.955- 0.961 g/ml. (mfg-space.com)
Tensile stamina of HDPE (Return at 23 ℃): 23.0- 29.5 MPa. (mfg-space.com)
Tensile stamina of HDPE (Break at 23 ℃): 30.5- 33 MPa. (mfg-space.com)
Tensile Modulus of HDPE (23 ℃): 900- 1550 MPa. (mfg-space.com)
CNC machined components of HDPE can get to limited resistance and high precision to be used in a particular location. (mfg-space.com)
HDPE is not an easy-to-machine material, the CNC milling procedure is advised and also high milling rates are needed. (mfg-space.com)
To avoid surface splits caused by heat generated during reducing and contortion due to the inner tension, annealing is an effective approach, to attain higher quality accuracy machining of HDPE. (mfg-space.com)
HDPE geomembrane is a waterproof and barrier material produced from (medium) high-density polyethylene resin. (tinhygeosynthetics.com)
High-density polyethylene (HDPE), a white powder or granular product. (tinhygeosynthetics.com)
When the ethylene and comonomers (as required) of Krah Machine HDPE come into contact with the catalyst, polyethylene particles are formed. (krahpipe.net)
After removing the diluent from the HDPE of the Krah machine, the HDPE polyethylene particles or powder of the Krah machine are dried and the additives are added according to the dosage to produce the HDPE pellets of the Krah machine. (krahpipe.net)
The higher molecular weight of the Krah machine's HDPE leads to higher polymer viscosity, but the viscosity is also related to the temperature and shear rate used in the test. (krahpipe.net)
Generally, the higher Mw (lower melt index MI) of Krah machine HDPE enhances melt strength, better toughness, and ESCR, but higher Mw makes the HDPE processing process of the Krah machine more difficult or requires higher Pressure or temperature. (krahpipe.net)
Leveraging high-density polyethylene (HDPE) in applications makes durable products. (shell.us)
So when a part needs to be ductile and withstand high-and low-temperature treatment, HDPE is a great contender. (shell.us)
HDPE is a popular choice across a variety of industries because of its moisture and chemical resistance, impressive tensile strength and durability. (shell.us)
This jar is made of high density pol-yethylene (HDPE). (uhrohmuh.com)
HDPE has a strong tensile strength, good impact-resistance and chemical resistance. (uhrohmuh.com)
High Density Polyethylene (HDPE) Plastic Lab Bottles offer good strength and chemical resistance. (foramfera.com)
HDPE bottles offer stronger tensile strength than LDPE containers, are harder and more opaque. (foramfera.com)
Since the early seventies, high-density polyethylene (HDPE) has been the polymer of choice for the production of bottles. (foramfera.com)
This report is to examine the financial viability or otherwise of establishing a 220 L Double L-ring drum production plant in Lagos using High-density polyethylene (HDPE) as the raw material. (foramfera.com)

In the paper, a characterization of autothermal and conventional extrusion processes of low density polyethylene (LDPE) in the typical single screw extruder equipped with a classical screw was presented. (degruyter.com)
Low Density Polyethylene Price - Select 2021 high quality Low Density Polyethylene Price products in best price from certified Chinese High Density Polyethylene Pipe manufacturers, High Density Polyethylene Sheets suppliers, wholesalers and factory on Made-in-China.com Low-density polyethylene Low-density polyethylene (LDPE): Aramco Trading offers a range of low-density polyethylene grades, which combine excellent clarity and strength with ease of processing. (web.app)
Webbplats The fracture mechanics properties of injection-moulded low-density polyethylene (LDPE) sheets were investigated both experimentally and Low Density Polyethylene Homopolymer. (web.app)
Low Density Polyethylene (LDPE): It's the industry workhorse. (web.app)
LDPE is a thermoplastic, further classified as a polyethylene plastic. (web.app)
In polyethylene: Low-density polyethylene LDPE is prepared from gaseous ethylene under very high pressures (up to about 350 megapascals, or 50,000 pounds per square inch) and high temperatures (up to about 350 °C [660 °F]) in the presence of oxide initiators. (web.app)
Svetsbar påse tillverkad av lågladdande LDPE (Low Density PolyEthylene). (web.app)
Greater impact resistance and tensile strength than LDPE. (mfg-space.com)
Low density polyethylene (LDPE) has a high-ductile nature and less than average tensile strength. (supplyland.com)

A reliable basic all-around LMA electrode for unalloyed and low alloyed ship quality steels, high deposition rate, deposit with high resistance against impact and cracking. (wilhelmsen.com)
Though other properties are intermediate between the two bases, toughness for the copolymer exceeds either, with good tensile and puncture resistance. (wikipedia.org)
On the test benches, the network length was measured and in the laboratory the maximum tensile force, the elongation at maximum tensile force, weather resistance and change in measure after hot storage. (dlg.org)
Properties High quality 0.20mm to 2.50mm geomembrane 2.0mm with smooth surface high strength, low permeability, chemical corrosion resistance, ultraviolet & sun exposure resistance, oxidation resistance, weather resistance, antimicrobial, erosion resistance. (kitaitorg.ru)
On the other hand, PP offers advantages in terms of higher temperature resistance, transparency, and chemical resistance. (cambridgeseals.com)
Provides great tensile strength and puncture resistance. (welpackind.com)
poor aging resistance, environmental stress cracking resistance is not as good as low-density polyethylene, especially thermal oxidation will reduce its performance, so antioxidants and ultraviolet absorbers must be added to the resin to improve this deficiency. (tinhygeosynthetics.com)
The high-density polyethylene of the Krah machine has good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. (krahpipe.net)
Nylon produces a high-strength zip tie with good thermal and abrasion resistance. (supplyland.com)
Stainless steel cable ties also offer excellent resistance to high temperatures and weathering. (supplyland.com)
High strength, a high elastic modulus, high fracture toughness, and high fatigue resistance are vital for materials used as articular surfaces in total joint arthroplasty, both to provide mechanical reliability and to resist deformation. (medscape.com)

In addition, two related tests, a single-point, notched, constant-tensile-load (SP-NCTL) test and a seam, constant-tensile-load (SCTL) test was establised. (epa.gov)

The maximum tensile force and the elongation at maximum tensile force is determined in the new condition and after weathering of the material according to DIN EN ISO 527-3: 2003-07. (dlg.org)
Analysis of mechanical performance, including yield stress and elongation at break, for samples adopted from different regions in a molded plaque showed that a higher injection speed, a higher mold temperature and a longer cooling time could effectively enhance the yield stress but negatively promoted the ductility. (brad.ac.uk)

As a result, it causes low density and a less compact molecular structure, Goodwrappers PVT18060 Linear Low Density Polyethylene Clear Cast Hand Stretch Wrap On a 3" ID Core, 2000' Length x 18" Width x 60 Gauge Thick (Case of Linear Low Density Polyethylene (LLDPE) is the most flexible of the plastic sheeting films. (web.app)
2021-4-10 · Linear low density polyethylene (LLDPE) is one of the most widely used polyethylenes in the world. (web.app)

Tensile and fracture behaviour of isotropic and die-drawn polypropylene-clay nanocomposites. (brad.ac.uk)
Polyethylene & polypropylene are members of the polyolefine family of thermoplastics. (edplastics.co.uk)
Material 54% Low density polyethylene, 31% Polypropylene, 14% Thermoplastic elastomer, 1% Silicone Kapacitet 532 ml. (web.app)
Polypropylene-R, Medium Density poly ethylene (MDPE) in the form of dumb bells. (pipetestingequipment.com)

Linear or high-density polyethylene has a greater hardness and tensile strength. (lookformedical.com)
Crosslink density was indirectly determined by the Knoop hardness of five specimens per group before and after immersion in ethanol for 6 h. (bvsalud.org)

Compared to other types of thermoplastic they all have low densities and negligible water absorption. (edplastics.co.uk)

The injection molded composites exhibited the best values in the (specific) impact strength, (specific) tensile properties. (unt.edu)
A Comparative Study of Mechanical Strength and Interface Properties of Hemp Fiber Composites with Virgin and Recycled High Density Polyethylene Matrix, Composites Part B: Engineering , 45 (2013) pp 1651-1656. (purdue.edu)
Effect of Surface Functionalization of Hemp Fiber on mechanical Properties of Fiber and Composites with Poly Lactic Acid (PLA) Matrix, Proceeding of 28th American Society of Composites Technical Conference , pp38-46, Sept 9-11, 2013, State College, PA. (purdue.edu)
Thermal Properties of Hemp-High Density Polyethylene Composites: Effect of Two Different Chemical Treatments, Materials Processing and Interfaces , Volume 1, pp 375-382. (purdue.edu)
Thermal and Mechanical Properties of Recycled High Density Polyethylene/hemp Fiber Composites, International Journal of Applied Science and Technology , Vol. 1, No.5, pp 31-35. (purdue.edu)
The observed highest SE of these composites is 60 dB which is realistic for an industrial application (40 dB). (4spe.org)
Such lightweight composites are used in a variety of applications ranging from sports, transportation, aviation and marine structures due to high dimensional stability, compressive strength and low moisture absorption. (nyu.edu)
1 , which is comparable to other high impact energy absorbing composites and nanomaterials, such as Kevlar/poly(vinyl butyral) (PVB) composite, polystyrene, and pyrolized carbon nanolattices with 23% relative density. (lu.se)

PP can handle higher temperature applications without melting or deforming. (cambridgeseals.com)
The tensile tests at ambient and elevated temperature were used to study the mechanical properties. (4spe.org)
In the case of mechanical properties, the tensile test at elevated temperature showed that the strength of the blends of recycled PET/virgin PET were lower than those ones of virgin PET. (4spe.org)
High-density polyethylene film has a low heat distortion temperature under stress, so care should be taken when applying it. (tinhygeosynthetics.com)
The most important aspect of the overmolding process is to ensure that the melting temperature of the substrate is considerably higher than the second molding material. (vem-tooling.com)

ASTM D 638-10 standard for the tensile properties of unreinforced and reinforced plastics is followed for the tensile testing. (nyu.edu)
to determine properties of tensile and longation as per ASTM D - 638 / ASTM D - 882 of plastics - Eco version. (pipetestingequipment.com)

Tensile stress-strain measurements with video-extensometry and tensile fracture of double edge-notched tensile specimens have been used to evaluate the Young¿s modulus at three different strain rates and the total work of fracture toughness at three different notch lengths. (brad.ac.uk)

Changes to the mechanical, chemical, and structural properties were monitored by uniaxial tensile testing and Fourier-transform infrared spectroscopy (FTIR). (nist.gov)
Composition, Structure and Mechanical Strength of Hemp Fiber Reinforced Composite with Recycled High Density Polyethylene Matrix, Journal of Composite Materials , 46(16), pp 1915-1924. (purdue.edu)
The Effect of Alkylation on the Thermal and Mechanical Properties of Hemp Fiber Composite with Recycled High Density Polyethylene Matrix, The Proceeding of 26th American Society of Composite Technical Conference , Paper 1068, pp1-10. (purdue.edu)
It is known that a low degree of conversion is related to a low crosslink density 10 and decreased mechanical properties of the formed polymer. (bvsalud.org)

A Study of Tensile Properties of Hemp Fiber Reinforced Composite with Recycled High Density Polyethylene Matrix, The Proceeding of Society of Advance Material Processing Engineering SAMPE Annual Technical Conference , Novel Materials & Fibers, pp1-9. (purdue.edu)
The present work is focused on using an industrial scale injection molding technique for fabricating syntactic foams and characterizing the fabricated syntactic foams for tensile properties. (nyu.edu)
The present work is aimed at characterizing syntactic foams for tensile properties and investigating the effect of filler content. (nyu.edu)
Nanoarchitected materials represent a class of structural meta-materials that utilze nanoscale features to achieve unconventional material properties such as ultralow density and high energy absorption. (lu.se)
The effect of HEMA on adhesive resin properties has already been examined in a previous study and showed that an increased ratio of HEMA decreases the degree of conversion and ultimate tensile strength, and increases the water sorption and solubility of polymer 9 . (bvsalud.org)

The results from the Queen's University Belfast samples showed a decrement in tensile strength at yield. (brad.ac.uk)

Clay intercalation structure has received particular attention to support the ultimate objective of optimising tensile and fracture behaviour of isotropic and die-drawn PPNCs. (brad.ac.uk)

Effect of Hydrostatic Pressure on the Deformation Behavior of Polyethylene and Polycarbonate in Tension and in Compression. (dtic.mil)
The stress-strain response of crystalline high density polyethylene and of amorphous polycarbonate has been determined in tension and in compression at superimposed pressures up to 1104 MPa 160 ksi. (dtic.mil)
Tensile necking occurred in both materials, but was promoted by pressure in polyethylene and inhibited in polycarbonate. (dtic.mil)

Heavy cross sections withstand the pressure of high-tensile fencing. (supplyhog.com)
The ideal joint bearing for THA and TKA would be able to withstand high cyclic loading for several decades, without undergoing corrosion or fretting at modular metal tapers, and would possess proven biocompatibility and material stability in vivo, as well as ultralow wear rates. (medscape.com)

With Shell Polymers, converters will receive high-quality resin that has passed in-depth tests-giving you the peace of mind that our products satisfy the specifications of that particular grade. (shell.us)
Rotomoulding involves resin or liquid placed inside a mold and rotated at high speeds for hollow and thick plastic parts like car parts, bins, road cones, pet houses, storage tanks, etc. (bestprecision.in)

These processes yield a polymer structure… Compound low density polyethylenewith free spectra: 8 FTIR. (web.app)

The chemical modification of poly(ethylene-co-vinyl acetate) with a primary aliphatic n-alcohol in a modular co-rotating twin screw extruder was investigated. (degruyter.com)

A high-density material means you get 2 favourable conditions for its practical uses. (selzerpolymers.com)
The weathering of the material is carried out in accordance with DIN EN ISO 4892-2, procedure A. (dlg.org)
Engineering Sustainable Construction Material: Hemp Fiber Reinforced Composite with Recycled High Density Polyethylene Matrix, ASCE Journal of Architecture Engineering , 19 (3) pp 204-208. (purdue.edu)
This material meets UL94 V-2 flammability ratings and can operate in temperatures as low as -40° F. Typically a nylon zip tie melting point is 185° F. Nylon cable ties can be heat stabilized for continuous or extended exposure to high temperatures of up to 250° F. The manufacturing process can also produce UV stabilized ties for outdoor use. (supplyland.com)
Nanoindentation arrays over the entire sample area reveal the out-of-plane elastic modulus to vary between 300 MPa and 4 GPa, with irrecoverable post-elastic material deformation commencing via individual nanostrut buckling, densification within layers, shearing along perturbation perimeter, and tensile cracking. (lu.se)

LLDPE suppliers need to meet the demand for LLDPE, which will presumably achieve the highest percentage increases until 2026, with rates of 3.0% per year. (web.app)

It has a very low tensile strength among thermoplastics. (web.app)

High-density polyethylene items are extensively utilized in a range of markets because of their safety, excellent corrosion-resistant efficiency, and also recyclability, including however not restricted to complying with applications. (mfg-space.com)

High Density Polyethylene (HD-PE300) has excellent impact strength, even at temperatures as low as -30 C. Coupled with low coefficient of friction and ease of fabrication, HD-PE300 is widely used in automotive, leisure and industrial applications and is particularly suitable for the fabrication of tanks, silos, hoppers etc. (edplastics.co.uk)

It was found that the crystallization degree and crystalline lamella size were greater at higher take-off temperatures than those at lower take-off temperatures. (4spe.org)

EPE foams are low density, semi-rigid, closed cell foam that are generally somewhere in stiffness/compliance between Expanded polystyrene and Polyurethane. (wikipedia.org)

It also remains rigid up to very high temperatures too. (selzerpolymers.com)
The equipment works at high temperatures and the air is inserted into the liquid plastic and blown up. (bestprecision.in)
They can also stand extremely high temperatures from -328° F to 1000° F. There are two types of stainless steel used in cable ties: 304 and 316. (supplyland.com)

A Study of Surface Morphology and Flexural Strength of Hemp Fiber Reinforced Composite with Recycled High Density Polyethylene Matrix, Applied Mechanics and Materials , Vol. 71-78, pp 4416-4420. (purdue.edu)

After the injection molding, the samples are measured for tensile strength according to standard D638. (iospress.nl)
3% and 5% clay systems at various compatibilizer (PPMA) loadings were prepared by three different mixing routes for the isotropic sheets, produced by compression moulding, and tensile bars, produced by injection moulding process. (brad.ac.uk)
The principle of injection molding is high pressure and solidification. (bestprecision.in)
Plastic injection molding's advantages include uniformity, decreased cost, and quick high-volume production. (xometry.com)

Feature papers represent the most advanced research with significant potential for high impact in the field. (mdpi.com)

Known for their natural, high quality and purity, MN grades are used in agriculture, home & garden, automotive components, ceramic and fertilizer industries. (epminerals.com)

Expanded polyethylene (aka EPE foam) refers to foams made from polyethylene. (wikipedia.org)
White round bale winding net with orange-colored stripes at the edge made of high-density polyethylene (PE-HD) with red warning strips at the end of the roll. (dlg.org)
DELTA®-DRY & LATH is a 3-dimensional rainscreen membrane made out of a special high-density polyethylene. (spycorbuilding.com)
Made from a high density extruded polyethylene mesh that is recyclable, this turf protector can be used to protect grasslands from heavy foot traffic or light vehicles. (deerbusters.com)

PE has a lower tensile strength than nylon 6/6, but it is more flexible. (supplyland.com)

Typical densities are 29 to 120 kg/m3 (49 to 202 lb/cu yd) with the lower figure being common. (wikipedia.org)

Ceramic bearings were first employed as alternatives to polyethylene (PE) bearings in total joint arthroplasty about a decade after Sir John Charnley introduced the first durable total hip arthroplasty (THA) with a metal-PE articulation. (medscape.com)

HDPE's higher tensile strength makes it more suitable for applications where strength and durability are crucial. (cambridgeseals.com)
5. High-density polyethylene geomembrane is suitable for petrochemical: chemical plant, oil refinery, anti-seepage of oil storage tank, chemical reaction tank, lining of sedimentation tank, secondary lining, etc. (tinhygeosynthetics.com)

With the same vibration amplitude, a higher vibration frequency leads to a smaller average particle size and a narrower particle distribution. (4spe.org)

High tensile, heavy duty spring compresses under tension, preventing over-stretching. (remedyanimalhealth.ca)

Polyethylene is offered in sheets, rods, and special forms, making it a wonderful CNC machining product to be reduced on a turret or mill. (mfg-space.com)

Understanding how we name our grade slates will be key to choosing the right melt index and density you need. (shell.us)

Low hydrogen, high tensile electrode for welding of mild steel and ship quality steel. (wilhelmsen.com)
Use of such techniques can help in developing foams with high quality for bulk applications. (nyu.edu)
Build high-speed networks from a variety of high-quality cable offerings that are customized to fit your needs. (commscope.com)
Deliver high-quality video services over HFC and cable networks. (commscope.com)
With high quality raw materials procurement, blow moulded articles and containers are manufactured with superior quality associated with convenient shapes and sizes, strong and sturdy construction, compact designs, compatibility, safe to use etc. (foramfera.com)

Polyethylene Chemical Compatibility Guide Page 1 of 5 Chemical Compatibility Guide For Polyethylene Items This Chemical Compatibility Guide is offered for informational purposes only and was developed from information sources other than SpillTech. (web.app)

However, it also is one of the most repeatable manufacturing processes, and it also has the highest variety of materials, colors, and cosmetics when compared to CNC machining or even 3D printing. (xometry.com)

The Signamax Category 5e Unscreened Patch Cords have been designed to meet the need for today's high-bandwidth applications. (signamax.com)

The test basis was the DLG test frame for high-density polyethylene round bale winding nets (PE-HD), as of November 2016. (dlg.org)

Anatomy15

Organisms9

Diseases21

Chemicals and Drugs107

Analytical, Diagnostic and Therapeutic Techniques and Equipment62

Phenomena and Processes44

Disciplines and Occupations3

Technology, Industry, Agriculture18

Information Science3

Health Care8

HDPE49

LDPE9

Resistance11

Constant Tensile Load1

Elongation2

Linear low density2

Polypropylene4

Hardness2

Thermoplastic1

Composites8

Temperature5

Plastics2

Toughness1

Mechanical4

Properties5

Strength at yield1

Fracture1

Polycarbonate3

Withstand2

Resin2

Yield1

Ethylene1

Material5

LLDPE1

Thermoplastics1

Corrosion1

Widely1

Crystalline1

Expanded polystyrene1

Temperatures3

Composite1

Injection4

Impact1

Grades1

Made4

Nylon1

Typical1

Durable1

Suitable2

Particle1

Tension1

Sheets1

Melt index1

Quality5

Chemical1

Processes1

Applications1

Test1