• ASTM G155: Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials. (who.int)
  • ISO 105 B02 is applicable to the determination of the colour fastness of all types and forms of textiles to artificial light sources (simulated natural daylight D65). (lonroy.com)
  • Light fastness tests, using the Blue Wool scale as a reference, are carried out using a Xenon Arc lamp as a light source. (hibiscus-plc.co.uk)
  • Blue Wool 7 - Excellent performance, only a limited number of pigments give this level of light fastness, even at full strength. (hibiscus-plc.co.uk)
  • Direct comparisons of the Blue Wool Scale to the light fastness required to meet BS 5609 do not exist. (hibiscus-plc.co.uk)
  • Labels passing BS5609 have had light fastness values over Blue Wool 6. (hibiscus-plc.co.uk)
  • MB4000W water-cooled xenon arc light fastness tester-Products-Quanzhou Meibang Instrument Co., Ltd. (redpenmamapgh.com)
  • Those materials exposed at simulated sunlight to evaluated the material's light fastness performance. (temperature-humiditychamber.com)
  • Silk fabrics direct-dyed with carthamin, curcumin and fuchsine were exposed for up to 672hrs to a xenon arc lamp (1.1 Wm-2 @ 420nm) in a QSun XE1 accelerated light chamber at 26±1oC. (napier.ac.uk)
  • Environmental aging xenon chamber,Temperature is another component of the end use environment which plays a key role in material degradation. (temperature-humiditychamber.com)
  • I. Purpose: Xenon arc test chamber are used for the best simulation of full-spectrum sunlight to reproduce destructive waves existing in different environments. (qc-test.com)
  • Xenon weathering test can be used for the durability test after the selection of new materials, improving existing assessment materials or changes in material composition changes, this test chamber can be use for best simulation of material changes when exposure to the sun in different environmental conditions. (qc-test.com)
  • Much of an arc lamp's stability in wavelength and output intensity is due to keeping the temperature and pressure of the gas inside the lamp's envelope as constant possible. (newport.com)
  • Despite best efforts to remove damaging UV and short wavelength light from museum displays, dyes on historical textiles can still fade or change colour if visible light causes chromophoric compounds to form or degrade. (napier.ac.uk)
  • Initial results reveal new compounds in samples filtered at and near visible wavelength maxima for their dye chromophores: curcumin ~400mm (faded after 48hrs exposure), carthamin ~510nm (yellowed after 120hrs) and pararosaniline ~560nm (bluer after 168hrs). (napier.ac.uk)
  • It is faster than the UVA type lights, but it has deviated from the actual test results than the wavelength energy output of 360 nm. (qinsun-tester.cn)
  • Changing the filter glass can vary the transmitted short wavelength ultraviolet light, thereby changing the speed and type of the material suffers from damage. (qinsun-tester.cn)
  • Light from the Xenon lamp has the nearest artificial wavelength distribution to that of the sun. (hibiscus-plc.co.uk)
  • Potential hazards to the eye depend on laser light wavelength, beam intensity, distance from the laser, and power of the laser (both average power over long intervals and peak power produced in a pulse). (microscopyu.com)
  • The wavelength of the laser radiation is significant because only light within the wavelength range of approximately 400 to 1400 nanometers can penetrate the eye sufficiently to damage the retina. (microscopyu.com)
  • Near-ultraviolet light of certain wavelengths can damage layers of the eye near the surface, and can contribute to cataract formation in the lens, especially in younger persons, whose eye tissues have greater transparency in this wavelength range. (microscopyu.com)
  • b) Optical filter: located between the light source, the sample and the standard wool, so that the ultraviolet light is stabilized and weakened. (lonroy.com)
  • In fact, they are sensitive to light ranging from upper ultraviolet through the visible blue part of the spectrum. (screenprintingmag.com)
  • UV irradiation aging test utilizes fluorescence ultraviolet light to simulate the destructive effect of solar light on the durability material. (qinsun-tester.cn)
  • The fluorescence ultraviolet lamp is similar to those of ordinary illumination with ordinary illumination, but can generate more ultraviolet light instead of visible or infrared light. (qinsun-tester.cn)
  • xenon arc radiation test is considered to be a test of ZUI to simulate full sun spectroscopy because it produces ultraviolet light, visible light and infrared light. (qinsun-tester.cn)
  • It is usually used in filtering with three types: daylight, window glass, and extended ultraviolet light type (Method 1 and method 2 mentioned in GB / T1865-1997) correspond to the first two types). (qinsun-tester.cn)
  • Light in the near-infrared can produce surface damage as well, although at a higher damage threshold than for ultraviolet light. (microscopyu.com)
  • In this article, various arc lamp based ultraviolet technologies that are used for inactivation of pathogens such as viruses and bacteria are examined. (alliedscientificpro.com)
  • Xenon lamp tester can be the most realistic simulated solar spectrum, including ultraviolet, visible and infrared. (qc-test.com)
  • Spectral output The wavelengths of light, or spectral output, of an exposure source should match closely the spectral sensitivity of photostencil materials. (screenprintingmag.com)
  • The key characteristics of the improved method include the application of a new light source filter for spectral match to sunlight in the UV spectrum and an optimized water spray cycle that can create realistic moisture related coating damage. (sae.org)
  • The first arc discharge lamp that is discussed is the well-known mercury arc lamp that has its main emission spectral line at 254 nm. (alliedscientificpro.com)
  • The lamp light passed through a daylight-through-glass filter3 and then an array of 10nm and 60nm bandpass filters, from 395nm to 755nm and 470nm to 780nm respectively, over the silks. (napier.ac.uk)
  • SHMA Xenon Lamp series has the continuous spectrum similar to the visible and infrared region of daylight. (unilam.co.kr)
  • This document references the use of a filtered xenon-arc light source (daylight behind window glass) as described in ISO 4892-2 for accelerated tests with the intention of reproducing as closely as possible different end-use lighting conditionsUilIiJ. (315368.com)
  • For example, detailed information covering exposures in devices that use carbon-arc, xenon-arc, and fluorescent UV light sources are found in Practices G152, G153, and G154, and G154 respectively. (normservis.cz)
  • Note 1--Carbon-arc, xenono-arc, and fluorescent UV exposures are also described in Practices G23, G26, and G53 which described very specific equipment designs. (normservis.cz)
  • By contrast, with a widely dispersed light source such as fluorescent tubes, light rays enter the stencil material at oblique angles, quite literally angled behind the dark edges of the artwork, reducing the fine detail or resolution of the stencil (wide angle incidence). (screenprintingmag.com)
  • Xenon arc and Fluorescent light . (micomlab.com)
  • Fluorescent light accelerated weathering testing is mainly used to assess mechanical properties retention through exposure. (micomlab.com)
  • The 66907-150XF-R1 Xenon Light Source is a complete plug and play light source system that includes a 150 W Ozone Free Xe arc lamp, lamp socket adapter, research light source housing, lamp power supply, as well as all the necessary interconnection cables for operation. (newport.com)
  • The lamp is an ozone-free xenon short arc lamp. (unn.ru)
  • The provided 69907 arc lamp power supply is a highly regulated for maximum stability. (newport.com)
  • This document describes test equipment and procedures for measuring the light stability of photographic prints when subjected to a filtered xenon-arc light source at specified levels of illuminance (irradiance), temperature and relative humidity. (iso.org)
  • However, this method also has its limitations, namely, xenon arc light stability and the complexity of the test system thereby. (qinsun-tester.cn)
  • Digital setting of light intensity , real-time monitoring, automatic adjustment, to meet the different standards for testing the stability of light source. (climate-testchamber.com)
  • 2, The standard 420nm band, optional 340nm, 420nm, 300-400nm, 280-800nm band monitoring, irradiance digital setting, real-time monitoring, automatic adjustment, in order to meet the requirements of different standards for the stability of the test light source. (redpenmamapgh.com)
  • 2020 pdf free.Imaging materials - Photographic reflection prints - Methods for measuring indoor light stability. (315368.com)
  • In light stability tests, a high irradiance level is used, often with significant UV content. (315368.com)
  • This novel study of the chemical impact of visible light on photosensitive dyes therefore suggests that tuneable LED museum lighting for textiles could be protective and so will be studied further in the Filtered Light Project. (napier.ac.uk)
  • The same set of standard blue wool was exposed to the sun (artificial light) under the specified conditions. (lonroy.com)
  • Testing is typically done by controlled exposure to sunlight, or to artificial light generated by a xenon arc lamp. (wikipedia.org)
  • The rubber to be tested is placed in direct contact with the specified organic material and then exposed to heat and/or artificial light. (52voa.cn)
  • A light-coloured veneer or lacquer of specified material is applied to the rubber to be tested and then exposed to heat followed by artificial light. (52voa.cn)
  • UV resistant according to DIN EN ISO 4892-2 (Plastics - Methods of exposure to laboratory light sources - Part 2 Xenon-arc-lamps). (rfsworld.com)
  • Part 2:Xenon-arc lamps. (wanfangdata.com.cn)
  • Such as arc welding torches, mercury lamps, and UV sanitizing bulbs used to kill bacteria and other germs (such as in water, air, food, or on surfaces). (josephmuciraexclusives.com)
  • The potential for photoretinitis resulting from viewing the sun, tungsten-halogen lamps, high intensity discharge lamps, xenon short-arc lamps, welding arcs, etc., is provided in this report. (cie.co.at)
  • 1.1 This practice provides general procedures to be used when exposing nonmetallic materials in accelerated test devices that use laboratory light sources. (normservis.cz)
  • 1.2 This practice also describes general performance requirements for devices used for exposing nonmetallic materials to laboratory light sources. (normservis.cz)
  • Note 2--Guide G141 provides information for addressing variability in exposure testing of nonmetallic materials. (normservis.cz)
  • Textile dyes specifically remain un-investigated, so the Filtered Light Project pilot study was initiated to assess visible light effects on major chemical components of the light-sensitive historical dyes safflower, turmeric and basic magenta (fuchsine). (napier.ac.uk)
  • Test methods requiring the use of a QUV and Test methods requiring the use of a Xenon Arc Tester . (micomlab.com)
  • 2. 200-800nm Full Spectrum Laboratory Accelerated Environment Simulation Xenon Lights Aging Tester Price can be used for the selection of new materials, improvement of existing materials or the change test of durability after the change of material composition. (climate-testchamber.com)
  • High grade standard wool is about twice as light resistant as low grade wool. (lonroy.com)
  • The Blue Wool scale, with a range of 1 to 8, uses samples of wool dyed with 8 different blue pigments each of which fade after different exposure times: 1 being the least resistant, and 8 being the highest. (hibiscus-plc.co.uk)
  • weather resistant xenon equipment to simulate and strengthen the test according to light energy, temperature, rain fall or condensation,humidity,et c. (temperature-humiditychamber.com)
  • With several modes of operation (rain, alternating light and dark, revolution and rotation), can simulate the real climate state. (climate-testchamber.com)
  • ISO 4892-2 and ISO 4892-3: Plastics - Methods of exposure to laboratory light sources. (who.int)
  • This information is intended primarily for producers of laboratory accelerated exposure devices. (normservis.cz)
  • Methods of exposure to laboratory light sources. (wanfangdata.com.cn)
  • These deficiencies can limit the confidence of the laboratory accelerated test, and as a result the user needs to rely more heavily on long term natural exposure results. (sae.org)
  • To increase the confidence of laboratory accelerated weathering testing, a new xenon arc light source filter and test protocol were investigated. (sae.org)
  • No accelerated laboratory exposure test can be specified as a total simulation of actual use conditions. (315368.com)
  • Results obtained from these laboratory accelerated exposures can be considered as representative of actual use exposures only when the correlation has been established for the specific materials being tested and when the type of degradation is the same. (315368.com)
  • Specific information about methods for determining the property of a nonmetallic material before and after exposure are found in standards describing the method used to measure each property. (normservis.cz)
  • Lightfastness is a property of a colourant such as dye or pigment that describes its resistance to fading when exposed to light. (wikipedia.org)
  • Depending on the test method, the type of exposures changes. (micomlab.com)
  • ASTM Committee G3 is developing a standard guide for application of statistics to exposure test results. (normservis.cz)
  • The UVB light is also commonly used to accelerate artificial climate aging test lights. (qinsun-tester.cn)
  • Test and radio transmission are powered by using light conversion technology, no additional power supply is required. (climate-testchamber.com)
  • Both of the UV light sources mentioned are used to predict the effect of sunlight exposure, either outdoor or indoor, on your product on an accelerated basis. (micomlab.com)
  • Laser emission is similar to direct sunlight exposure in that the light arrives at the eye in parallel rays, which are very efficiently focused on the retina, the rear surface of the eye that senses light. (microscopyu.com)
  • Solar Simulator is certified to IEC 904-9 , JIS C 8912, and ASTM E 927-05 standards, this 4 x 4 inch, 450 Watt, source uses a xenon lamp and proprietary filter to meet Class A performance parameters without compromising the 1 sun output power. (unn.ru)
  • The actual lightfastness is dependent on the strength of the radiation of the sun, so lightfastness is relative to geographic location, season, and exposure direction. (wikipedia.org)
  • c) Heat filter: located between the light source, the sample and the standard wool, so that the infrared light is stabilized and weakened. (lonroy.com)
  • That's why yellow lights make good safelights-photostencil materials don't react to the longer wavelengths of yellow. (screenprintingmag.com)
  • For known light-sensitive dyes, better understanding of the impact of visible wavelengths on them could lead to innovative tuneable LED lighting that offers protection by removing the more damaging wavelengths without perceived colour change to the exhibit or light source. (napier.ac.uk)
  • The physical response of the human eye differs for light of different wavelengths, and this has a bearing on the potential damage that may occur for several reasons that will be discussed below. (microscopyu.com)
  • The danger presented by these wavelengths is amplified due to the fact that ocular focus is possible, and collimated light within this range is focused by the eye on a very small spot on the retina, concentrating its power to a high density. (microscopyu.com)
  • Light intensity Photostencil materials, even those comparatively fast ones formulated for projection exposure, are not nearly as fast exposing or sensitive as camera film. (screenprintingmag.com)
  • Thus, light sources need the power-the intensity-to expose stencils in a reasonably productive amount of time. (screenprintingmag.com)
  • UV sun exposure can be done through direct exposure (i.e. outdoor exposure) or the impact of sun exposure through glass (i.e. indoor exposure). (micomlab.com)
  • Xenon arc testing is mainly used to assess color/appearance changes over time as a result of indoor/outdoor exposure to UV light either directly from the sun or through glass (indoor conditions). (micomlab.com)
  • 3, Irradiance is guided by optical fiber technology, 16 bit AD sampling, 32 bit CPU processing, digital setting, AC variable frequency stepless adjustment of xenon lamp, fully realized closed loop and stable automatic compensation. (redpenmamapgh.com)
  • Principle of arc surface optical illumination outputs more and brighter beams. (indymogul.com)
  • This is true for estimating risks from sunlight under a variety of conditions, and from optical radiation from artificial sources. (cie.co.at)
  • 3. Double-layer quartz glass observation window can observe the flame spread distance, and display the flame advance position through the indicator light, which makes the recording more intuitive. (firetesting-equipment.com)
  • Skin cancer occurs most frequently in the most heavily exposed areas and correlates with degree of outdoor exposure. (cie.co.at)
  • 8, Super large experimental warehouse design, large size drum type specimen hanger, exposure area of 4700cm2. (redpenmamapgh.com)
  • I am interested in 1200 W/M2 Accelerated Xenon Weathering Machine could you send me more details such as type, size, quantity, material, etc. (temperature-humiditychamber.com)
  • Beams of sufficiently high power can burn the skin, or in some cases create a hazard by burning or damaging other materials, but the primary concern with regard to the laser beam is potential damage to the eyes, which are the part of the body most sensitive to light. (microscopyu.com)
  • In practice, lasers operated in pulsed mode are generally of higher power, and a single microsecond-pulse of sufficient power can cause permanent damage if it enters the eye, whereas a lower-power continuous beam may only present a hazard with long-term exposure. (microscopyu.com)
  • The results of studies of acute photochemical retinal injury, frequently referred to as the "blue light hazard (BLH)" are described in this technical report. (cie.co.at)
  • Describing the relationship of exposure (dose) to risk (skin cancer) requires the availability of a biological hazard function or action spectrum for photocarcinogenesis. (cie.co.at)
  • One of the most dangerous threats is an arc flash - an electrical hazard that can raise temperatures up to 35,000 degrees F and cause harm to people and equipment. (environmental-expert.com)
  • 1.3 This practice provides information on the use and interpretation of data from accelerated exposure tests. (normservis.cz)
  • Information regarding the reporting of results from exposure testing of plastic materials is described in Practice D5870. (normservis.cz)
  • The black panel shall be constructed in accordance with ISO 489 2-1 and mounted at the specimen exposure plane. (315368.com)
  • The user is protected from accidental exposure to UV radiation and electrical shock by the lamp housing's safety interlock, which disables ignition and power to the lamp if the housing door or lamp housing interconnection cable is not securely connected. (newport.com)
  • SHMA Metal Lamp series provides a high-luminance point light source even with low power. (unilam.co.kr)
  • The two major concerns in safe laser operation are exposure to the beam and the electrical hazards associated with high voltages within the laser and its power supply. (microscopyu.com)
  • With Low power consumption but achieve the same irradiation light requirements. (climate-testchamber.com)
  • 1200 W/㎡ accelerated xenon weathering machine is equipped with a piece low power air-cooling xenon lamp to produce enough big irradiance energy in a small space, on the other hand, it adopts a special catoptrical system to ensure every exposure samples get the homogeneous irradiance distribution. (temperature-humiditychamber.com)
  • 3. The changes caused by material exposure to sunlight under different environmental conditions can be well simulated. (climate-testchamber.com)
  • 1, Adopt the 4500W (6000W) water cooled xenon lamp, the first point light source high efficiency electric energy and light conversion technology in China, and the high transmission rate filter system, the same energy of xenon lamp is lower, so that the machine can achieve energy saving and environmental protection. (redpenmamapgh.com)
  • Typically gloss and color measurements a taken at different exposure intervals until the total planned exposure duration is completed. (micomlab.com)
  • To evaluate the shear bond strength of brackets bonded to ceramic with Transbond XT resin, etching time intervals (1 and 2 minutes) and three Light sources (Xenon Plasma Arc, LED and Halogen Light ), with and without silane. (bvsalud.org)
  • If photographic stencil materials were made that fast, they would be virtually impossible to protect from pre-exposure. (screenprintingmag.com)
  • Imagesetter-exposed silver film (right-reading photographic positives), laser toner (usually on vellum), inkjet on inkjet film, thermal images, and knife-cut masking film are examples of commercial media used for contact exposure. (screenprintingmag.com)
  • ISO/IEC 11801-1:2017(E) This document specifies a multi-vendor cabling system which may be implemented with material from single or multiple sources. (saiglobal.com)
  • Warm Prompt】:Amazon's Recommender System is not 100% accurate.Please measure the location before purchasing.The distance from screw hole to screw hole is 2.2in (55mm).There are four screws inside the packaging.And the LED license plate light can directly screwed into the installation position.Convenient and firm. (indymogul.com)
  • The Ci Series Weather-Ometers are the most widely used rotating rack water-cooled xenon-arc weathering testing instruments in the world. (qinsun-lab.com)
  • The National Electrical Code (NEC) was established in 1897 to help protect workers from electrical hazards such as an arc flash. (environmental-expert.com)
  • When looking into buying something that will likely be an investment and part of your everyday life - like led plate light , it makes sense to spend some time getting educated on where exactly this product falls within its market space. (indymogul.com)
  • The shutter has a minimum exposure time of 200 ms and can be controlled via a contact closure or logic level input, or a convenient push-button switch on the illuminator housing. (unn.ru)
  • Micom also offers UVc exposure for surfaces used in healthcare environments. (micomlab.com)