• However, reproducibility and in particular variability between measurements done using different instrumental setups have not been addressed systematically before. (hal.science)
  • Reproducibility for the measurements of regional plaque burden with QMSCT-CA was good, with a mean intraobserver and interobserver variability of 0% ± 16% and 4% ± 24%, respectively. (escardio.org)
  • The measurement error inherent in these reference measurements has become significant as terrain profilers have become more accurate. (astm.org)
  • If you are planning to make changes in BP meds, there ought to be accurate reproducible measurements. (medscape.com)
  • We had Einstein and his theory of general relativity, which predicted an expanding universe, but we lacked the means to take accurate measurements of astronomically distant objects and so figure out our place within it. (sspnet.org)
  • More importantly, the results are accurate and reproducible. (ivf1.com)
  • Possibly a more automated approach may result in more accurate and importantly, reproducible results. (escardio.org)
  • ISE calibration standards for accurate and reproducible ISE measurements. (capitolscientific.com)
  • Results of the fluorescent immunoassay (FIA) are reproducible, and the test is accurate and sensitive for the detection of human urinary albumin excretion. (cdc.gov)
  • The first test measurements in LASER COMPONENTS' coating systems led to positive results: The combination of plasma and layer monitoring allows new control concepts to be developed which can be used to adjust the coating properties more precisely. (automate.org)
  • Results indicating a value above the limit of detection were unusual, and subsequent measurements were often within the normal range of the test device. (cdc.gov)
  • In fact, any process change, no matter how minute, can drastically affect the measurement results. (photonics.com)
  • The other goal is to show the latest research results in the field of cybersecurity and understand how traffic measurements can influence it. (wikicfp.com)
  • Measurement of real samples and correct interpretation of the results collected. (epfl.ch)
  • Performing precompliance measurements on power supplies requires using a line impedance stabilization network (LISN) for results that can be compared to limit values. (rohde-schwarz.com)
  • This provides the user with reproducible measurement results. (rohde-schwarz.com)
  • Conducted emission measurements with the Würth LISN show that the max hold spectrum on the input line is very close across the entire frequency spectrum compared to the results from the off-the-shelf LISN. (rohde-schwarz.com)
  • The graphic presentation of measurement results established in cooperation with medical professionals gives you valuable support for diagnosis and therapy. (seca.com)
  • This cloud-based software ensures that you can provide measurement results to your patients at any time. (seca.com)
  • Finally, the origin of the excitation frequency-dependent photocurrents lies in the electronic structure of the chromophore excited states, as shown by the results of theoretical calculations, laser flash photolysis, and steady-state spectrophotometric measurements. (osti.gov)
  • The protocol must be comprehensive enough to ensure reproducible measurement results of reproduced materials and environments. (scirp.org)
  • RESULTS (a) Distinct and reproducible configurational features were observed in the CSF flow waveforms. (ajnr.org)
  • The attenuation results from the subject-fit method corresponded more closely to real-world data than results from the other protocol tested, which allowed the experimenter to coach subjects in HPD use, Comparisons of interlaboratory measurement variability for the subject-fit procedure to previous interlaboratory studies using other protocols indicated that the measurements with the new procedure are at least as reproducible as those obtained with existing standardized methods. (cdc.gov)
  • A probe developed by the Ruhr University of Bochum now enables in-situ measurements of plasma parameters for the first time. (automate.org)
  • The method is noninvasive, inexpensive, and enables reproducible measurements. (hindawi.com)
  • AutoStrain delivers fast, reproducible 2D strain quantification for the LV, LA and RV. (philips.com)
  • We studied 47 patients to investigate the accuracy of coronary plaque volume measurement acquired with 64-slice multi-slice computed tomography (MSCT), using newly developed quantification software, when compared with quantitative intracoronary ultrasound (QCU). (escardio.org)
  • Further improvement in CT resolution is required for more reliable measurement of coronary plaques using quantification software. (escardio.org)
  • The objective of the nitric oxide exam was to produce baseline FENO measurements and reference ranges for the U.S. healthy population as well as those with asthma and COPD, and those who are smokers. (cdc.gov)
  • The data collection was also intended to help define the prevalence of undiagnosed airway inflammation in the US, and to examine the association between airway inflammation, other measurements of lung function and capacity, and physical and laboratory measures. (cdc.gov)
  • He is familiar with a variety of software, equipment, and laboratory protocols for a wide array of signals and measurements. (biopac.com)
  • Presentation of in-house protocols for reproducible and reliable measurements (towards metrology). (epfl.ch)
  • Here, we implement this strategy by developing protocols for obtaining an ultrapure tau fragment (residues 304-380 of tau441) and for performing spontaneous aggregation assays with reproducible kinetics under quiescent conditions. (lu.se)
  • The goal was to approximate the amount of attenuation that can be achieved by noise-exposed populations in well-managed real-world hearing conservation programs, while maintaining acceptable interlaboratory measurement variability. (cdc.gov)
  • EC3 measurements are reproducible in both intra- and interlaboratory evaluations and are stable over time. (cdc.gov)
  • The two screenshots below show a conducted emission measurement using the R&S®RTO2064 oscilloscope with a standard-compliant, off-the-shelf LISN and the homemade LISN designed by Würth Elektronik eiSos GmbH & Co. KG. (rohde-schwarz.com)
  • Defined parameters for various frequency ranges are used automatically to ensure reproducible, standard-compliant measurements. (rohde-schwarz.com)
  • Moreover, wide variation between individual measurements was reported, indicating high observer variability (1;2). (escardio.org)
  • Patients with chest pain that is predictably exertional, with electrocardiogram abnormalities, or with cardiac risk factors should be evaluated further with measurement of troponin levels and cardiac stress testing. (nih.gov)
  • 3.3 Are the measurements reliable? (bestbets.org)
  • This is a crucial factor in creating reliable, reproducible dry powder size measurements. (horiba.com)
  • CONCLUSION CSF flow waveform analysis seems to be a reliable, reproducible, and sensitive method for assessing the CSF dynamics. (ajnr.org)
  • Network traffic measurement and monitoring can, for example, enable the analysis of the spreading of malicious software and its capabilities or can help to understand the nature of various network threats, including those that exploit user's behavior and other user's sensitive information. (wikicfp.com)
  • Introduction to some basic methods used for powder characterisation, particle size measurement and a brief introduction to powder dispersion and suspension characterisation. (epfl.ch)
  • Technical note: quantitative long-term measurements of VOC concentrations by PTR-MS-measurement, calibration, and volume mixing ratio calculation methods. (springer.com)
  • It is especially useful for the measurement of low levels of urinary albumin not detectable by dipstick methods. (cdc.gov)
  • This extension is the measurement of the scientific and regulatory community charged with relative skin sensitizing potency of a substance, the acceptance of new methods has to make prag- usually expressed as the estimated concentration matic decisions. (cdc.gov)
  • The full description of methods is available in the Global Tuberculosis Report 2013 and the data sets are available from the WHO global TB database ( www.who.int/tb/country/en/ ). (who.int)
  • The physical model is necessary because, in general, spectra for the refractive index and extinction coefficient of any material cannot be measured directly, but must be deduced from optica measurements such as reflectance, transmittance or the phase shift of polarized light. (photonics.com)
  • The fast and precise measurements with the digital Liebherr smart slewing bearing and sensors enable you to maintain your applications and operations with maximum efficiency. (liebherr.com)
  • Thanks to the handle, Body Scan analyzes your body on a segment-by-segment basis, providing ultra-precise measurements of your body composition. (withings.com)
  • Say hello to a revolutionary assessment that features ultra-precise measurements to identify small changes in your body composition. (withings.com)
  • The computerized semen analysis, however, takes precise measurements to determine what is normal and is therefore far more consistent than a manual analysis. (ivf1.com)
  • The acoustic measurements are performed using a professional microphone test system consisting of the FX100 Audio Analyzer and the Microphone Test Software RT-MicFx. (nti-audio.com)
  • Providing stable and reproducible illumination conditions, the tel. (kitairu.net)
  • Our study has identified several important points to be taken into consideration in order to overcome possible issues in measurement and analysis of nanoparticles using DLS. (hal.science)
  • The diverse analysis capabilities, high measurement speed and time-saving automated test routines make the R&S®ESL the obvious choice for any development lab with small budget that needs to prepare for EMC certification tests. (rohde-schwarz.com)
  • Analysis of cerebrospinal fluid flow waveforms with gated phase-contrast MR velocity measurements. (ajnr.org)
  • We used stepwise regression analysis to determine whether anthropometric measurements significantly predicted metabolic syndrome. (cdc.gov)
  • Examinees were not always able to meet the criteria for a reproducible measurement even within the ten attempts allowed to perform the exhalation, as indicated by the exam status variable ENXSTAT. (cdc.gov)
  • However, a simple and easy screening procedure that uses a single measurement can help determine whether further testing is needed. (cdc.gov)
  • If either or both of the first two valid FENO measurements was below 30 ppb and the measurements were within 2 ppb of each other, or if both measurements were over 30 ppb and within 10% of each other, then the test was considered reproducible and complete. (cdc.gov)
  • The combination of very good RF characteristics and all of the important functions needed for fast, precise measurement and evaluation of the EMC of a device under test in accordance with commercial standards is unmatched in this instrument class. (rohde-schwarz.com)
  • The Partica LA-960V2 Powderjet dry feeder accessory combines several unique and patented features to provide the most reproducible dry measurements. (horiba.com)
  • that is, peaks and valleys often occur in the DUV spectral range, which will be obscured, to some degree, when the measurement produces noisy raw data. (photonics.com)
  • Measurement and data transfer in only 24 seconds. (seca.com)
  • The latter two parameters are frequently referred to as optical constants, but the word constant is misleading because the values of n and k actually depend on the wavelength used to make the measurement. (photonics.com)
  • Using separate isotopes in monomers and fibrils, through mass spectroscopy measurements, we verify the isotope composition of the intermediate oligomeric species, which reveals that these small aggregates are generated from monomer through secondary nucleation. (lu.se)
  • Measurement Microphones in particular are comprehensively tested in our acoustic measurement chamber. (nti-audio.com)
  • Accordingly, this attention to quality is given to every measurement microphone during testing in our in-house anechoic chamber. (nti-audio.com)
  • Markus Frick proudly reports, 'The anechoic acoustic measurement chamber provides us with consitently reproducible measurements. (nti-audio.com)
  • The ability to measure such low noise levels underlines the sophisticated design of the measurement chamber and its insulation against sound and vibration from outside. (nti-audio.com)
  • 1400degC) , with tripod, is available for contactless temperature measurements through the chamber windows. (lu.se)
  • Screening the general population for POAG is most effective if targeted toward those at high risk, such as African Americans and elderly individuals, especially if the screening consists of IOP measurements combined with assessment of optic nerve status. (medscape.com)
  • How easily can omission of patients, or selection amongst poorly-reproducible measurements, create artificial correlations? (bvsalud.org)
  • Beside of bearing clearance measurement Liebherr offers solution for bearing monitoring temperature and water content for various applications and areas. (liebherr.com)
  • All you need to do for the measurement is to guide the logger's temperature probe through the opening and secure it using the union nut. (testo.com)
  • Temperature measurement with a pyrometer should be considered reproducible, but poorly calibrated. (lu.se)
  • FENO measurements have also been used as a tool to monitor compliance with treatment with inhaled steroids in asthmatics. (cdc.gov)
  • Traditionally, terrain profilers have been evaluated based on their ability to reproduce measurements made from some reference device (e.g., a rod and level). (astm.org)
  • We carry out reference measurements and 100% of our series testing in-house. (nti-audio.com)
  • Switch off the power supplying the DUT for a reference measurement. (rohde-schwarz.com)
  • Two values below the limit of detection or above the limit of detection were also considered reproducible. (cdc.gov)
  • This problem may be addressed by systematically obtaining reproducible in vitro kinetics measurements under quiescent conditions in the absence of triggering substances. (lu.se)
  • This is the key to safe measurement for your employees and a profitable future for your applications. (liebherr.com)
  • Consequently, the recommendation made here is that LLNA EC3 measurements should now be regarded as a validated method for the determination of the relative potency of skin sensitizing chemicals, a conclusion that has already been reached by a number of independent expert groups. (cdc.gov)
  • Two measurements of the inhibition zones were made on the paper discs containing the solutions, and mean values were calculated. (bvsalud.org)
  • High-precision clearance measurements performed remotely. (liebherr.com)
  • In addition to outstanding precision and accuracy, you receive an completely user-friendly and practical BIA solution with an optional ultrasonic height measurement and brilliant cloud-based software with the seca mBCA 554. (seca.com)
  • When the sample amount is limited, or has low flowability, the trigger function starts and stops the measurement with faultless precision. (horiba.com)
  • This workshop presents some of the most relevant ongoing research in cybersecurity seen from the traffic measurements perspective. (wikicfp.com)
  • Penkett S, Barrie L. WMO/GAW Expert Workshop on Global Long-term Measurements of Volatile Organic Compounds, WMO TD No. 1373. (springer.com)
  • When combined with a homemade DC-LISN, the oscilloscopes create a powerful measurement setup for early conducted emission tests of power electronics designs with no need for additional expensive equipment. (rohde-schwarz.com)
  • The main idea is a setup harmonized to support precompliance measurements. (rohde-schwarz.com)
  • Under the direction of Dr. Jens Harhausen, the INP provided significant support for the installation of measurement and control technology in production facilities. (automate.org)
  • Understanding measurement comes from practice, and sometimes our children need more practice to develop that "aha" moment. (rainbowresource.com)
  • The assurance of measurement quality is done by using a huge amount of certified liquid VOC standard solutions (or gaseous VOC standard cylinders) with multiple dilutions to reach the required trace level. (springer.com)
  • NTi Audio develops and manufactures high-quality sound, audio and vibration measurement products. (nti-audio.com)
  • Current analytical instruments used for measurements are gas chromatographs equipped with various injector and detector configurations. (springer.com)
  • Historically, the biggest challenge in dry powder measurement involves establishing an even powder flow. (horiba.com)
  • a brain natriuretic peptide level measurement can clarify the diagnosis. (nih.gov)
  • Finally, the event must be easily transported and reproducible. (astm.org)
  • The measurement of fractional exhaled nitric oxide (FENO) was one of two NHANES 2011-12 examination components on respiratory health sponsored by the National Heart, Lung, and Blood Institute of the National Institutes of Health. (cdc.gov)
  • CMS received a request to delete the national noncoverage of blood flow measurement from the Magnetic Resonance Imaging NCD at 220.2 of the NCD Manual and thus permit local Medicare contractor discretion to cover this use under 220.2(D). The requestor points to an apparent contradiction between this noncoverage provision and the national coverage of magnetic resonance imaging under the Magnetic Resonance Angiography NCD at 220.3 of the NCD Manual. (cms.gov)
  • Calculation and verification of blood ethanol measurement uncertainty for headspace gas chromatography. (springer.com)
  • 0.001) with QMSCT-CA. Overall, the limits of agreement for plaque burden/volume measurement between QCU and QMSCT-CA were relatively large. (escardio.org)
  • If a standard is a measurement of a physical reality, then working to achieve the specification is a good thing. (sspnet.org)
  • He became CEO in 2008 and has continued to develop and grow the business while also working with physiology measurement and biometric companies to improve the physiology monitoring industry. (biopac.com)