Polymerization denture base resin. Medical search. Frequent questions

Dimensional changes can occur due to polymerization shrinkage and expansion, thermal shrinkage, water absorption, and internal stress release [ 8 ]. (hindawi.com)
Overall, the difference between SR-Ivocap® Injection and every other processing technique out there is that the SR-Ivocap® Denture Injection System provides a continuous injection of acrylic during polymerization which compensates for shrinkage during polymerization allowing for better adaptation to the cast. (wiandlab.com)
can affect the amount of polymerization shrinkage that may be one of the causes of inaccuracy. (abstractarchives.com)
Besides minimising polymerization shrinkage, cooling method plays an important role in producing denture base with good adaptation, leading to better treatment outcome. (um.edu.my)
Dimensional changes, spherical formation, and higher polymerization shrinkage are significant disadvantages of compression molding technique. (dmr.gov.mm)
However, after posts have been cemented with resin agents, stresses produced by polymerization shrinkage may harm the integrity of the bond between the resin cement and the root canal walls [ 1 ]. (hindawi.com)
With increments any larger, the material at the bottom of the increment would be at risk of not fully curing, and polymerization shrinkage stress would increase. (dentaleconomics.com)
Compared to universal resin composites, flowable composites have greater polymerization shrinkage and inferior mechanical properties due to their lower filler percentage. (dentaleconomics.com)
BPS system uses a controlled heat/pressure polymerization procedure during which time the exact amount of material flows into the flask to compensate for shrinkage, which ensures a perfect fit. (akruthidentalcare.com)
A comparative evaluation of time dependent polymerization shrinkage of acrylic resin post patterns in different storage environment -an in vitro study. (mradc.in)

Comparative evaluation of the tensile bond strength of two silicone based denture liners with denture base resins. (docksci.com)

Certified since 1998, the BPS Brand Prosthetic System incorporates the use of intraoral traces (Gnathometer) for a precise bite, the Stratos semi-adjustable articulator, Ivoclar denture teeth and SR-Ivocap® Injection processing. (wiandlab.com)
With SR-Ivocap® Injection, pressure and heat together enable both a high degree of polymerization and an excellent adhesive bond to resin teeth. (wiandlab.com)
Before the teeth are placed back into the gel mould they require grinding on the neck and base to increase retention, using the bredent set-up grinding tool (34001010). (dent-line.com)
Thanks to its additional lid, this flask allows technicians to perform implant dentures, joining the advantages of the Small Glass with those of the Light Glass, reducing any waste of Silicone and working on teeth and gingiva. (xpdent.com)
Wider than traditional transparent flasks and more stable with its three screws, Light Glass allows dental technicians to perform full implant dentures working simultaneously on composite teeth and gingiva thanks to the provided three lids and the removable three pins. (xpdent.com)
You may feel the denture doesn't look right because of things friends or relatives have said- the teeth are too big or small, too light or dark, you show too much tooth or too little, they are too even or too irregular, the lip may be too bulky or not supported enough, the colour of the denture base (gum coloured acrylic) may be felt to be unnatural - any number of possibilites. (akruthidentalcare.com)
BPS denture meets the esthetic demand of patients with its unique Ivoclear teeth, which replicate anatomy of the natural tooth Ivoclear teeth are made up of 3 layers of cross-linked acrylic resins that contribute to a life-like appearance and resistance to wearing. (akruthidentalcare.com)
Complete dentures are replacement teeth for when all your natural teeth have been removed. (akruthidentalcare.com)
They become a sturdy base for supporting one or more artificial teeth, called crowns. (akruthidentalcare.com)
A precision attachment denture is a kind of RPD that contains precision attachment(s) to lock the denture onto the natural teeth. (akruthidentalcare.com)
The 'male' part is fixed to the natural teeth and the corresponding 'female' section is incorporated into the denture. (akruthidentalcare.com)

Removable dentures can be produced from a variety of materials and processing techniques. (hindawi.com)
This enables the vat polymerization of both full and partial removable dentures. (3dprint.com)

All the 120 heat-cured, surface-treated acrylic denture base resin samples were randomly divided into three groups. (thejcdp.com)
The aim of this study was to investigate the effect of polymerization time and polymerization temperature on the residual methyl methacrylate (MMA) content of two heat-cured and two autopolymerized denture base polymers. (niom.no)
With the heat-cured denture base resins, a curing cycle at a polymerization temperature of 70 degrees C followed by a period at 100 degrees C significantly reduced the residual monomer content of the polymer when compared with a resin cured at 70 degrees C only. (niom.no)
Polymerizing the heat-cured denture base resin at 100 degrees C only for various lengths of time significantly affected the residual MMA content of the polymer. (niom.no)
The lowest residual MMA content (0.07 wt%) was obtained by polymerizing the heat-cured denture base resin at 100 degrees C for 12 h. (niom.no)
Introduction: 20 minutes rapid heat-cured resin acrylic is one of the denture base material improvisation to reduce processing time. (um.edu.my)
Aim: The purpose of this study is to investigate the effect of different cooling methods on denture base adaptation of rapid heat-cured resin acrylic. (um.edu.my)
The recently introduced heat cured denture base material, Yamahachi Basis HI, has advantages such as high impact resistant, non-creeping, sufficient working time and excellent temperature stability, claimed by the manufacturer. (dmr.gov.mm)
Commonly used silicone liners can be RTV and heat cured.6 Soft liners have several problems like loss or varying degree of softness, colonization with Candida albicans, staining, porosity, poor tear strength and lack of color stability.7 One of the serious problems is the failure of adhesion between the soft liner and the denture base. (docksci.com)

Through experimental research, we have proved the direct involvement of basic resin materials in changes in the oral cavity micro ecology and the process of occurrence of prosthetic stomatitis. (czytelniamedyczna.pl)
One of the main complications that arise during using full or partial dentures is prosthetic stomatitis (common recurrent disease with localization on a mucous membrane of both prosthetic bed and intact areas of gum and vestibular part of oral cavity). (czytelniamedyczna.pl)
Denture stomatitis is a condition caused primarily by fungal growth on all surfaces of dentures that are worn for prolonged times and/or following inadequate cleaning of dentures. (thieme-connect.de)
Candida albicans is the most common fungal species causing denture stomatitis, and oral candidiasis has been reported in 24 to 60% of denture wearers. (thieme-connect.de)
Problems such as roughness and hydrophobicity of denture base material surface can promote the adhesion of microorganisms on the denture base surface and accelerate the formation of biofilm, which can easily lead to denture stomatitis after long-term wearing of denture base into the oral cavity.The anionic powder resin prepared by the sol-gel method using Na2SiO3 as the capping agent has excellent dispersibility and antibacterial properties. (alfa-chemistry.com)
The composite material can fight against common oral bacteria and reduce the number of bacteria on the surface of denture base materials, thus achieving the prevention of denture stomatitis. (alfa-chemistry.com)

The aim and objective of the present study was to assess the flexural strength of denture base resin based on surface treatment with different acrylic resin repair materials. (thejcdp.com)
After considering the limitations, the present study concluded that the highest flexural strength is shown by glass-fiber-reinforced auto-polymerizing acrylic resin than by auto-polymerizing acrylic resin and light-cured acrylic resin. (thejcdp.com)
A high flexural strength is essential because the uneven force distribution of the denture base will endure under load and leads to irregular alveolar ridge resorption. (dmr.gov.mm)
Flexural strength is one of the major determinants of the mechanical properties of acrylic resin and is affected by the polymerization technique used. (dmr.gov.mm)
The aim of this study is to evaluate and compare the technique and material for superior physical properties, flexural strength of denture bases. (dmr.gov.mm)

Through the use of prepolymerized blocks of polymethyl methacrylate (PMMA), computer software, and a 5-axis milling machine, CAD-CAM produced dentures have emerged as a popular choice [ 16 , 17 ], due to advancements in dental technology. (hindawi.com)
For both the maxillary and mandibular arches, CAD/CAM denture bases milled from PMMA blocks performed better adaptation than 3D printed, wax milled, and conventionally fabricated heat polymerized denture bases [ 9 , 16 ]. (hindawi.com)
For a long time polymethylmethacrylate (PMMA) has dominated the field of denture base materials 1 . (bvsalud.org)
Moreover, the dentures processed with high impact PMMA, Yamahachi Basis Hi will also have superior physical properties than the dentures processed with conventionally used PMMA, Ashvin. (dmr.gov.mm)
Study on Antibacterial Property of PMMA Denture Base Materials with Negative Ion Powder[J]. IOP Conference Series: Materials Science and Engineering , 2018. (alfa-chemistry.com)

Cyclic pressure-induced cytokines from gingival fibroblasts stimulate osteoclast activity: Clinical implications for alveolar bone loss in denture wearers. (tohoku.ac.jp)
In a quest for a suitable Denture Marker: A case report on three different inclusion techniques for identifying complete denture wearers. (mradc.in)
Akashi Y, Nagasaki A, Okawa H, Matsumoto T, Kondo T , Hirofumi Y, Nishimura I, Egusa H. Cyclic pressure-induced cytokines from gingival fibroblasts stimulate osteoclast activity: clinical implications for alveolar bone loss in denture wearers. (tohoku.ac.jp)

Evaluation and comparison of the effect of different surface treatment modifications on the shear bond strength of a resin cement to titanium- an in vitro study. (mradc.in)

More recently, resin cements have become an alternative to zinc phosphate cement, particularly because they are practically insoluble in the oral medium and have adhesive properties [ 1 , 9 , 11 , 12 ]. (hindawi.com)
Denture base resin (adhesive/cohesive) were assessed. (docksci.com)
Impact of adhesive primer and light-curing on polymerization kinetics of self-adhesive resin cement in association with free radical reaction. (tohoku.ac.jp)
Two groups were treated with a conventional chemically activated resin cement (ML, Multilink Ivoclar Vivadent) and the other two groups with a self-adhesive dual resin cement (RelyX U200, 3M ESPE). (allenpress.com)

The present study was organized in the form of a questionnaire-based survey among 300 foreign students of Medical Faculty and Faculty of Dentistry in Ukraine. (researchgate.net)
In the dentistry field, CAD-CAM dentures have quickly acquired popularity [ 18 , 19 ]. (hindawi.com)
Also used in oral cancer patients with postoperative defects requiring obturation and to modify transitional prosthesis after stage I and II implant surgery.4 Denture liners have been used in dentistry for more than a century. (docksci.com)

In addition, the convenience of constructing additional dentures utilizing digitized recorded patient clinical data is one of the merits of CAD-CAM dentures compared to conventional dentures. (hindawi.com)
Conventional acrylic resin denture base polymer does not fulfill all the requirements in terms of optimal mechanical properties due to its brittle nature. (dmr.gov.mm)
If the patients use the dentures processed by injection molding technique, there will be greater fracture resistance than the dentures processed by conventional compression molding technique. (dmr.gov.mm)
This article reviews the biological aspects of resin-based dental materials and discusses the conventional as well as the new techniques used for biocompatibility assessment of dental materials. (mdpi.com)
Compared with the conventional heat process method, the microwave method using the Justi Miracleflask gives more complete curing of the resin. (mid-continental.com)
Also, the fluidity of the resin allows it to adapt to the model much better in the retentive zones than conventional resins. (dent-line.com)
Method: Heat cure conventional and high impact acrylic blocks (120 blocks each) prepared with ﬁnal test specimen of two blocks of each resin with a liner. (docksci.com)
Comparative Evaluation Of Retention Of Conventional Resin Bonded Fixed Partial Denture And Its Modified Designs: An In Vitro Study. (mradc.in)
Comparative evaluation of the fit of partial denture framework fabricated from conventional casting wax and light cured pattern wax- an in vitro study. (mradc.in)

Adequate denture tissue fit is also important for denture retention, stability, and support [ 3 ]. (hindawi.com)
Denture retention has a significant impact on masticatory performance and speaking capacity, and thus on the subjects' quality of life [ 4 ]. (hindawi.com)
Denture base adaption to the underlying mucosa is reduced as a result of this deformation, resulting in decreased denture stability and retention. (hindawi.com)
The use of sodium hypochlorite as an irrigant solution during endodontic treatment, as well as filling cements containing eugenol in their formulae, may also influence retention of posts cemented with resin cement [ 14 - 16 ]. (hindawi.com)
Some studies have concluded that cores cemented with zinc phosphate cement have retention values higher than or similar to those cemented with resin cements [ 17 - 20 ]. (hindawi.com)
259 medical journal armed forces india 72 (2016) 258-264 and retention thus jeopardizing denture success. (docksci.com)
1 ] There are several well-known contributing factors for oral candidiasis including the age of the denture wearer and the period of denture usage, hygiene habits, candidal load, host immune condition, nocturnal denture wear, occlusion, and denture retention and stability. (thieme-connect.de)

The model is soaked and placed on the metal base plate of the flask. (dent-line.com)
Then the plastic flask is snapped over the base plate and the pour holes are plugged with the silicone plugs ensuring proper positioning of the sprues. (dent-line.com)
The metal base plate is separated from the flask and the model is carefully deflasked using compressed air to gently separate it from the gel. (dent-line.com)
The flask is placed into a pressure pot for 30 minutes at 40 to 50 °C. After curing the denture is deflasked from the gel and the sprue channels are cut off. (dent-line.com)
The JST flask is suitable for hot processing of the XPLEX dual high-impact resin. (candulor.com)
Simply by placing the Flask lid through magnetic attachment to the lid of the Verticulator, you will be able to finalize a full denture either through the injection or the pouring technique. (xpdent.com)
Implant box is a flask with a minimal and compact design that allows you to cast the model in plaster directly on the base. (xpdent.com)

Effect of polymerization temperature and time on the residual monomer content of denture base polymers. (niom.no)
Additionally, the SR-Ivocap® Denture Injection System leaves behind less residual monomer resulting in a denture base that will not discolor to yellow. (wiandlab.com)
A significant impact on the micro ecology of oral cavity in the area of the prosthetic bed can have residual monomer (metylmetacrylat) and formaldehyde, which continue to be released from resin base (7, 8). (czytelniamedyczna.pl)
The method was then used to compare the residual monomer content in one hard chair-side reline resin (Duraliner II - D) and one heat-polymerized denture base resin (Lucitone 550 - L). Also, it was investigated the effect of two after polymerization heat-treatments on this residual monomer content. (unesp.br)
It is energy efficient, saves time, increases acrylic strength, less residual monomer, less distortion, two to three times more accurate fit and more uniform polymerization. (mid-continental.com)

The two-stage polymerized technique can improve the fit of the denture base particularly when the separation was made at 10 to 15 mm from the alveolar crest. (korea.ac.kr)

Various methods have been undertaken to solve complications related to broken dentures such as enhancing strength of the dentures post-repair including altering the denture material (high-impact resins) or strengthening it with different fibers. (thejcdp.com)
In denture processing methods, the CAD-CAM overdenture delivered more precise adaption and clinical performance than the compression mold technique. (hindawi.com)
Most previous research has evaluated the effects of modes of polymerization (11), methods of acrylic manipulation (1, 3, 6, 12), procedures of polishing (3, 6), and times of water immersion (11, 13) on the amount of residual MMA. (ac.ir)
Materials and methods: Acron Express (Kemdent, UK) and Fast Heat Curing Acrylic (Huge Dent, China) are the resins used in this study. (um.edu.my)
No statistically significant difference in denture adaptation of Fast Heat Curing Acrylic when subject to different cooling methods. (um.edu.my)
Materials and Methods Candida albicans biofilms on acrylic resin plates were treated for 15 minutes with either nystatin, fluconazole, Polident, 220µM erythrosine + 1% (w/w) nano-TiO 2 + 15 J/cm 2 blue light photodynamic therapy (Ery PDT), or distilled water. (thieme-connect.de)
Kakinuma H , Izumita K , Yoda N, Egusa H, Sasaki K. Comparison of the accuracy of resin-composite crowns fabricated by three-dimensional printing and milling methods. (tohoku.ac.jp)

Base for adapting any articulator on the market to the Trasformer System. (ids-cologne.de)
This articulator will allow you maximum visibility thanks to its posterior incisal guide pin and the possibility to set the model on it just using the Fast Clean Base and silicone instead of plaster. (xpdent.com)
Thanks to the integrated split cast it is possible to perfectly fit the base on Fast Protec Articulator, Verarte and All-In. (xpdent.com)

The aim of this study is to analyze if both color and nylon fibers have an influence on microwave-cured acrylic resin properties. (bvsalud.org)
The results showed that color and presence of nylon fibers in acrylic resins did not affect the properties analyzed in this study. (bvsalud.org)

The three-axis Verticulator enables different processing as dentures, implant dentures, and ceramic molding, facilitating the work and allowing you a wide visibility. (xpdent.com)
It is provided with two tips: the metallic one is useful to perform crown and bridges and implant dentures whereas the clear one is perfect to work with light-curing composites. (xpdent.com)
12 Vervaeke and co-workers treated patients with immediately loaded implants in the maxilla supporting fixed full dentures and found that immediate loading in the maxilla is a predictable and reliable treatment option with high survival rates and limited peri-implant bone loss after 2 years when using fluoride-modified implants. (dentalnews.com)

After cast nickel-chromium metal posts and cores were fabricated and luted with zinc phosphate (ZP) cement or resin cement (RC), the specimens were divided into 3 groups ( n = 10) according to the waiting time for core preparation: no preparation (control), 15 minutes, or 1 week after the core cementation. (hindawi.com)
However, other studies have shown better performance of resin cements when compared with zinc phosphate cement [ 21 ]. (hindawi.com)

The results of this study suggest that the polymerization temperature and polymerization time considerably affect the residual MMA content of denture base polymers. (niom.no)
This study was conducted on prosthetic bases with variations in the surface and shapes of residual ridges. (abstractarchives.com)
The incomplete polymerization, especially in auto-polymerized types (3), results in a gradual release of the residual monomers, even in dry static environments. (ac.ir)
O objetivo deste estudo foi estabelecer, inicialmente, um método analítico em CLAE, para comparar o conteúdo de monômero residual de uma resina autopolimerizável para reembasamento imediato (Duraliner II - D) e uma resina termopolimerizável utilizada na confecção de bases de próteses (Lucitone 550 - L). Além disso, foi avaliado o efeito de dois tratamentos térmicos sobre esse conteúdo. (unesp.br)

By digital superimposition, the materials and techniques employed in 3D Printing produced diverging results and the lowest value for accuracy of the fitting surface of the denture foundation in comparison to the CAD/CAM milled base, injection, and compression mold techniques [ 10 ]. (hindawi.com)
At Wiand Dental Lab, we use the SR-Ivocap® Denture Injection System for every case we process because it produces the best results. (wiandlab.com)
Cold-curing resin for the injection, pouring or pressing techniques. (ids-cologne.de)

The most commonly used denture base material in prosthodontic clinical practice is acrylic resin. (thejcdp.com)
As a result, if the denture is lost or broken, a replacement prosthesis can be made without the need for new clinical records [ 20 , 21 ]. (hindawi.com)
In various clinical conditions like atrophic or resorbed ridges, xerostomia, dentures opposing natural dentition, bony undercuts, relining is indicated to recapture the ﬁt of the denture base, especially when the denture still retains proper vertical dimension, occlusal relationship and esthetics.2,3. (docksci.com)
This creates a potential for bacterial growth, plaque, food debris and calculus accumulation.13 Therefore, frequent clinical evaluation and periodic replacement of the soft denture liner is essential.7 Serviceability of lining material varies from 6 months to 5 years. (docksci.com)

The success of denture repair depends on the adhesion phenomenon. (thejcdp.com)

For more than 66 years, we have been developing silicones and light-curing resins for dental and other medical applications. (detax.de)
This was followed by introduction of silicones in 1958.4,5 Permanent soft lining materials like epoxy, acrylic, urethane or silicone polymers, replace the ﬁtting surface of a hard plastic denture. (docksci.com)

The denture is then mounted for balancing the occlusion. (dent-line.com)

Previously we demonstrated substantial changes of microbiocenosis of the mucous membrane of the prosthetic bed and periodontal area of patients with partial and complete dentures (3, 4), that are deepening due to poor oral hygiene (5), accompanying somatic pathology and adverse effects of environmental conditions. (czytelniamedyczna.pl)
The Biofunctional Prosthetic System brand denture includes a comprehensive technique for impressions, record taking, tooth placement, fabrication and processing. (akruthidentalcare.com)

Background: To evaluate and compare tensile bond strength of two silicone based liners with Received 12 July 2014 heat cure and heat cure high impact denture base resin at baseline and after storage in Accepted 18 March 2015 artiﬁcial saliva for 30 and 60 days. (docksci.com)
The light-body silicone material was injected into the fitting surface of the record base. (korea.ac.kr)

He asked about posterior resin composites and I laughed. (dentaleconomics.com)

Totally, 120 heat-polymerized polymethyl methacrylate denture base resin materials which are rectangular shaped with the size of 65 mm × 10 mm × 2.5 mm were fabricated. (thejcdp.com)
2 Also, various materials have been used in the restoration of broken/fractured denture bases, such as visible-light-polymerized, heat-polymerized, auto-polymerized, or microwave-polymerized acrylic resin. (thejcdp.com)
Microbiological researches of the role of denture base materials in violation of the oral cavity micro ecology were conducted. (czytelniamedyczna.pl)
Therefore, the purpose of research is to study the effect of different polymeric materials on denture bases, on the intensity of planktonic growth of resident and transient representatives of oral cavity microflora in a periodic culture on the basis of registration of its optical density. (czytelniamedyczna.pl)
7 types of denture base materials and their influence on the planktonic growth of microorganisms have been studied. (czytelniamedyczna.pl)
Dette er et sammendrag av en studie nylig publisert i tidsskriftet Dental Materials (1). (tannlegetidende.no)
In acrylic resin materials, polymerization, which is the conversion of monomers into polymers, is usually incomplete. (ac.ir)
Although acrylic resins have undergone developments, the biocompatibility of these materials is usually disregarded in dental practice (8). (ac.ir)
Oral and mucosal adverse reactions to resin-based dental materials have been reported. (mdpi.com)
for fast and secure dissolution of the bonding between elastic relining materials and the denture acrylic. (detax.de)
Introduction Complete denture bases are fabricated commonly from rigid denture base materials like acrylic, vinyl and other resin polymers. (docksci.com)
It was added to denture base materials to prepare denture base materials containing anionic powder. (alfa-chemistry.com)

Auto-polymerized resins are the most popular acrylic resins in orthodontics because of their fast and convenient application and low cost (1, 2). (ac.ir)

The Polymaster is a polymerization device for the pouring/pressing technique using cold-curing polymers. (candulor.com)

Dual-activated cements provide long working time until they are exposed to light activation, and, due to the chemical polymerization process, their bond strength continues to increase over time [ 13 ]. (hindawi.com)
The purpose of this study was to evaluate the effects of steam autoclave sterilization on the tensile strength of two types of resin cements used to bond customized CAD/CAM zirconia abutments onto titanium bases. (allenpress.com)

Our dental clinics in Bangkok use 3M ESPE Filtek for composite resin fillings. (bangkokdentalcenter.com)
We advocate and mainly uses composite resin for your tooth fillings. (bangkokdentalcenter.com)
Composite resin dental fillings or white fillings are tooth fillings colored to look like a natural tooth. (bangkokdentalcenter.com)

Group I: glass-fiber-reinforced auto-polymerizing acrylic resin, group II: auto-polymerizing acrylic resin, and group III: light-cured acrylic resin. (thejcdp.com)

To assess tissue surface adaptation, the fitting surfaces of each denture base were scanned and placed on the reference master cast. (hindawi.com)

Forty sets of zirconia abutments cemented to screwed titanium bases of implants analogs were divided into 4 groups (n = 10). (allenpress.com)

The Staub™ Cranial System is a scientific approach to identifying proper tooth positioning based on fixed anatomical landmarks unique to each patient to a proven 95% accuracy. (wiandlab.com)

Denture repair comprises of joining two fractured parts of a denture with a denture repair material. (thejcdp.com)
The acrylic resin of auto-polymerizing type is frequently used as a repair material because of its rapid polymerization and easy handling and properties. (thejcdp.com)
During the entire polymerization process, the pressure is maintained at 6 bar to ensure continuous pressure feeding of additional material. (wiandlab.com)
3D Systems has gotten FDA 510(k) clearance for its NextDent Base material . (3dprint.com)
Removal of fluoride by effectively using spent cation exchange resin[J]. Journal of Material Cycles & Waste Management , 2017. (alfa-chemistry.com)
Mayanagi G, Yufang L, Hoshino T , Takahashi N. A water-soluble glass-based temporary restorative resin inhibited bacteria-induced pH reductions at the bacteria-material interface. (tohoku.ac.jp)

The fracture of acrylic denture base is uncommon, none the less an inevitable problem of denture care. (thejcdp.com)
Flexural fatigue caused by repeated flexure over a period of time results in the midline fracture of a denture. (dmr.gov.mm)

Removable denture adaptation is well established to be the most important element in determining the quality of the prosthesis [ 1 ]. (hindawi.com)
CAD-CAM produced dentures provide the best denture base adaptation [ 11 - 15 ]. (hindawi.com)
Furthermore, the least amount of distortion during CAD-CAM denture processing, which is critical for mucosal adaptation [ 14 , 22 ]. (hindawi.com)
In the present study, denture base adaptation of Fast Heat Curing Acrylic was compared with ISO 20795-1:2013 certified Acron Express when both were cooled down following manufacturer's instructions. (um.edu.my)

Conclusion Photodynamic therapy with erythrosine + nano-TiO 2 + blue light at low light power density (15 J/cm 2 ) was as effective at inhibiting C. albicans biofilm on acrylic resin as fluconazole and Polident. (thieme-connect.de)

Ten completely edentulous subjects with persistent complaints of their complete mandibular dentures were received four dental implants in the anterior mandible. (hindawi.com)

With the type of acrylic resin used and different construction procedures, denture adaption was considerably varied [ 5 ]. (hindawi.com)

It can be directly prepared by emulsion polymerization, or it can be obtained by mechanically pulverizing and sieving spherical resin. (alfa-chemistry.com)

The high bond strength between auto-polymerizing acrylic repair and heat-processed denture base resin is not always presumable. (thejcdp.com)

A delay in polymerization can be achieved with cold water by introducing it into the mould before placing the plugs. (dent-line.com)

As a result, one of the key goals of denture manufacture is to achieve maximum mucosal adaptability. (hindawi.com)

Using the Staub Cranial™ technique, a denture can be precisely fabricated in as little as three appointments. (wiandlab.com)
Almost every part of my posterior resin composite technique is different from what I was taught in school. (dentaleconomics.com)

You can wear immediate complete dentures for a couple of months while you wait for your gum tissue to heal. (akruthidentalcare.com)

He specializes in Implantology, B.P.S. Dentures,Crown and bridge,Smile Makeover & Full-Mouth Rehabilitation. (akruthidentalcare.com)

The broken denture is also subject to the mechanical and chemical factors present intraorally. (thejcdp.com)
In addition, microbial colonization (along with mechanical damage) is an important factor in reducing the durability of dentures (6). (czytelniamedyczna.pl)
Dentures that are not fit properly can rub on the sensitive gums, causing mechanical irritation underneath the dentures. (akruthidentalcare.com)

Powder resin refers to ion exchange resin with irregular fine powder in appearance. (alfa-chemistry.com)

A study published in the March 2001 issue of American Journal of Nursing finds that health care workers are more likely to sanitize their hands when alcohol-based hand sanitizing gel is available as an alternative to soap and water. (dent-line.com)
The aims of this study were to suggest a method of fabrication of the record base using a light-polymerized resin by applying the two-phase fabrication method for the improvement of the fit of the record base and to compare the degree of fit according to the separation site. (korea.ac.kr)
ABSTRACT No study has investigated the availability and adherence of preventive oral care products on the Syrian market to evidence-based international recommendations. (who.int)

Diseases4

Chemicals and Drugs34

Analytical, Diagnostic and Therapeutic Techniques and Equipment37

Phenomena and Processes21

Disciplines and Occupations1

Technology, Industry, Agriculture23

Information Science1

Health Care4

Shrinkage10

Liners with denture base1

Teeth11

Removable dentures2

Heat-cured9

Stomatitis6

Flexural Strength5

PMMA5

Wearers3

Shear Bond Strength1

Adhesive4

Dentistry3

Conventional9

Retention7

Flask7

Monomer5

Alveolar1

Methods7

Articulator3

Fibers2

Implant3

Cement2

Residual4

Injection3

Clinical4

Adhesion1

Silicones2

Occlusion1

Prosthetic2

Silicone2

Composites1

Materials12

Auto-polymerized1

Polymers1

Cements2

Composite resin3

Light-cured1

Surface1

Titanium1

Tooth1

Material6

Fracture2

Adaptation4

Biofilm1

Mandibular1

Considerably1

Spherical1

Acrylic repair1

Mould1

Mucosal1

Technique2

Complete1

Crown1

Mechanical3

Irregular1

Study3