• It is sparingly soluble in water, methanol, and propylene glycol and slightly soluble in ethanol, octanol, and glycerin. (rxlist.com)
  • Fluticasone propionate active ingredient is a white powder with a melting point of 273°C, a molecular weight of 500.6, and the empirical formula is C 25 H 31 F 3 O 5 S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. (rxlist.com)
  • These were Methanol, Ethanol, Propanol and Octanol. (educheer.com)
  • The compound is combined with alcohol-such as ethanol, methanol, or 2-octanol-to initiate a reaction that forms cyanoacrylate ester molecules. (aronalpha.net)
  • Its chemical name is (±)-1-(2H)-phthalazinone,4-[(4-chlorophenyl) methyl]-2-(hexahydro-1- methyl-1H-azepin-4-yl)-, monohydrochloride. (rxlist.com)
  • Azilsartan Medoxomil ( Figure 1 ) is an Angiotensin II receptor antagonist which has the chemical name (5-Methyl-2-oxo-1,3- dioxol-4-yl) methyl 2-ethoxy-1-{ [2'-(5-oxo-4,5-dihydro 1,2,4- oxadiazol-3-yl) biphenyl-4-yl] methyl}-1H-benzimidazole-7- carboxylate monopotassium salt. (biomedres.info)
  • A summary of the most common chemical descriptors (InChI Key and SMILES codes) for [(1R,3R,5S,7S)-3-amino-5-methyl-1-adamantyl]methanol are summarized together with 3D and 2D structures and relevant physico-chemical properties. (inchikey.info)
  • The molecule [(1R,3R,5S,7S)-3-amino-5-methyl-1-adamantyl]methanol presents a molecular formula of C 12 H 21 NO and its IUPAC name is [(1R,3R,5S,7S)-3-amino-5-methyl-1-adamantyl]methanol. (inchikey.info)
  • Geometry of [(1R,3R,5S,7S)-3-amino-5-methyl-1-adamantyl]methanol in x , y and z coordinates (Å units) to copy/paste elsewhere. (inchikey.info)
  • Formamide, N-alkylformamides and N,N-dialkylformamides are prepared by reacting methyl formate, which can be obtained by reaction of carbon monoxide with methanol, with ammonia, N-alkylamines and N,N-dialkylamines, respectively. (justia.com)
  • The methanol liberated here can be recirculated to the synthesis of methyl formate from carbon monoxide and methanol. (justia.com)
  • ACS Reagent or CMOS-grade methanol (methyl alcohol), anhydrous, sold for. (electrontubestore.com)
  • diofenolane ((m ) pa F-ISO) IUPAC name A mixture of: (2RS,4SR)-4-(2-ethyl-1,3-dioxolan-4-ylmethoxy)phenyl phenyl ether (50%-80%) and (2RS,4RS)-4-(2-ethyl-1,3-dioxolan-4-ylmethoxy)phenyl phenyl ether (50%-20%) CA name A mixture of (2RS ,4SR )-2-ethyl-4-[(4-phenoxyphenoxy)methyl]-1,3-dioxolane and (2RS ,4RS )-2-ethyl-4-[(4-phenoxyphenoxy)methyl]-1,3-dioxolane. (9ele.com)
  • 3-Chloropropyl(dimethoxy)methylsilane is a moisture-sensitive, volatile liquid that hydrolyses rapdily in contact with water (half-life approximately 1.3 hour at pH 7, predicted), generating methanol and 3-chloropropyl(methyl)silanediol. (europa.eu)
  • The high water solubility of the hydrolysis product, 3-chloropropyl(methyl)silanediol , results in a markedly higher blood:air partition coefficient (approximately 2.1E+07:1) so once hydrolysis has occurred, as it would be expected to in the lungs, then significant uptake would be expected into the systemic circulation. (europa.eu)
  • Meloxicam is chemically designated as 4-hydroxy-2-methyl-N-(5-methyl-2-thiazolyl)-2H-1,2-benzothiazine-3- carboxamide-1,1-dioxide. (hipaaspace.com)
  • The purpose of this chapter is to describe the analytical methods that are available for detecting, measuring, and/or monitoring naphthalene, 1-methylnaphthalene, 2-methylnaphthalene,, its metabolites, and other biomarkers of exposure and effect to naphthalene, 1-methylnaphthalene, and 2-methyl- naphthalene. (cdc.gov)
  • Analytical methods for the determination of naphthalene and for 1-methylnaphthalene and 2-methyl- naphthalene in biological samples are given in Table 7-1. (cdc.gov)
  • To highlight the importance of choosing the correct dissolution solvent, I developed a reversed-phase method to separate five organic-soluble compounds of various polarities (methyl paraben, butyl paraben, naphthalene, 1-nitronaphthalene, 3,5-dibenzyloxyacetophenone). (biotage.com)
  • Solubility: Soluble in methanol. (mubychem.com)
  • It is a white crystalline powder which is practically insoluble in water but freely soluble solvents like methanol, dimethyl sulfoxide and dimethyl formamide, soluble in acetic acid, slightly soluble in acetone and Acetonitrile and very slightly soluble in Tetra Hydro furan and 1-octanol. (biomedres.info)
  • Chlorthalidone is practically insoluble in water, ether and chloroform and soluble in methanol and also slightly soluble in alcohol. (biomedres.info)
  • Slightly soluble in petroleum ether, hexane, methanol. (forever-chem.net)
  • It is very slightly soluble in methanol. (hipaaspace.com)
  • Pigment Red 53:1 shows a consistent dissolution detected by UV-Vis spectroscopy over the measurement period and is classified as slightly soluble. (europa.eu)
  • Purification and pre-treatment: To avoid false positivee results (detection of additives, impurities etc.) the substance was purified by sequential solvent washes: first methanol / toluene (80/20, Merck, HPLC grade), then n-octanol (Sigma-Aldrich, Spectrophotometric grade), finally methanol (Merck, HPLC grade). (europa.eu)
  • The reaction is carried out in methanol as solvent using alkoxides as catalysts (Hans-Jürgen Arpe, Industrielle Organische Chemie, 6th edition, 2007, pages 48 to 49). (justia.com)
  • The dissolution solvent was methanol and the injection volume was 0.1 mL. (biotage.com)
  • It actually produced better results than the methanol sample even though it is a "stronger" solvent. (biotage.com)
  • For each solvent the substance is shaken for 2 hours at room temperature, recovered by centrifugal pelleting (20,000 rpm, 1 h), and dried under vacuum (1.3 mbar, 90 °C, 1 h). (europa.eu)
  • Five stock samples were prepared at 1 gram of each compound in 5-mL of each of the solvents (~20% solution). (biotage.com)
  • Reaction with nucleophiles and the synthesis of 1,3,7-octatriene In: Journal of the American Chemical Society. (wikipedia.org)
  • 3). The octanol-water partition coefficient for Reaction mass of 2-ethylpropane-1,3-diol (DMP) and 5-ethyl-1,3-dioxane-5-methanol (CTF) and propylidynetrimethanol (TMP) components are log Pow = 0.19 (CTF), -0.2 (DMP) and -0.8 (TMP). (europa.eu)
  • The binding of a further 25 drugs to rat liver microsomes at a microsomal concentration of 1 mg/ml was also studied, along with measurements of lipophilicity using octanol-water partition coefficients. (aspetjournals.org)
  • The resulting algorithm uses the dimensionless Henry coefficient and the octanol:air partition coefficient (K oct:air ) as independent variables. (europa.eu)
  • Meloxicam has an apparent partition coefficient (log P)app = 0.1 in n-octanol/buffer pH 7.4. (hipaaspace.com)
  • 20 °C). Its log octanol/water partition coefficient is 3.29, implying a moderate affinity for lipid tissues. (cdc.gov)
  • The telomerization is the linear dimerization of 1,3-dienes with simultaneous addition of a nucleophile in a catalytic reaction. (wikipedia.org)
  • Good dispersion in water, 1% aqueous solution is a milky white liquid, no gel phase during dissolution. (tqhp.com)
  • P. Fischer: process concepts for the transition-telomerization of isoprene with water or methanol. (wikipedia.org)
  • pH(1%soln/water): Notavailable. (shbyx.com)
  • Is methanol really more acidic than water? (stackexchange.com)
  • The question Why is methanol more acidic than water? (stackexchange.com)
  • deals with the reasoning of why methanol is more acidic than water. (stackexchange.com)
  • N-[3-(dimethoxymethylsilyl)propyl]ethylenediamine is a moisture-sensitive liquid that hydrolyses in contact with water (half-life approximately 15 minutes at pH 7), generating methanol and N-[3-(dihydroxymethylsilyl)propyl]ethylenediamine. (europa.eu)
  • If you are currently using reversed-phase at preparative scale, such as flash chromatography, you know the mobile phase limitations - water with either methanol, acetonitrile, or THF - that's just about it for mobile phase choices. (biotage.com)
  • Reversed-phase separation of 50 mg of a 5-component mix using a water-methanol gradient. (biotage.com)
  • Estimates of majority of the data considered were measures of reactivity, the uncertainty, as well as average values of the epidermal both purely chemical and in vitro cell based, whereas epidermal disposition kinetics parameters, were made by fitting to the time disposition was simply represented by the octanol-water course skin permeation data from individual skin donors. (cdc.gov)
  • Using these values for 3-chloropropyl(dimethoxy)methylsilane results in a blood:air coefficient of approximately 46:1 meaning that, if lung exposure occurred there would be uptake in to the systemic circulation. (europa.eu)
  • Meloxicam Tablets, USP is a non-steroidal anti-inflammatory drug indicated for: : 1 Osteoarthritis (OA)(1.1), 2 Rheumatoid Arthritis (RA) (1.2), 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥60 kg (1.3). (hipaaspace.com)
  • For my first run, I injected the methanol-dissolved mixture. (biotage.com)
  • Due to the risk of fatal respiratory depression, SUBSYS is contraindicated in opioid non-tolerant patients ( 1 ) and in management of acute or postoperative pain, including headache/migraines. (nih.gov)
  • The molar mass of an element (or compound) is the mass in grams of 1 mole of that substance, a property expressed in units of grams per mole (g/mol) (see Figure 1 ). (pressbooks.pub)
  • Abstract The invention describes a composition comprising a) a naturally occurring or synthetic elastomer susceptible to oxidative, thermal, dyna mic, light-induced and/or ozone-induced degradation, b) a white reinforcing filler, and c) as coupling agent, at least one compound of the formula I wherein the general symbols are as defined in claim 1, or an oligomeric hydrolysis product of the compound of the formula I. (allindianpatents.com)
  • This is the amount of energy in joules needed to raise the temperature of 1 gram of substance by 1oC. (educheer.com)
  • Tqhp is trusted global Sec-Octyl alcohol ethoxylates;2-Octanol ethoxylates . (tqhp.com)
  • If you would like to buy Sec-Octyl alcohol ethoxylates;2-Octanol ethoxylates in bulk. (tqhp.com)
  • We have many different kinds of packing which depend on Sec-Octyl alcohol ethoxylates;2-Octanol ethoxylates quantity. (tqhp.com)
  • Sec-Octyl alcohol ethoxylates;2-Octanol ethoxylates kg/bottle, 25kg/barrel, or 200kg/ barrel. (tqhp.com)
  • BUY Azelastine Hydrochloride (Astepro) 205.5 ug/1 from GNH India at the best price available. (gnhindia.com)
  • 4.3 (trans - isomer) (25 ºC) (OECD 117) Henry 6.74 ´ 10-3 Pa m3 mol-1 (calc. (9ele.com)
  • The four triazole fungicides were separated on a Purospher STAR RP-18 endcapped (4.6 × 150 mm, 5 µm) column with a mobile phase of 50% (v/v) acetonitrile at a flow rate of 1.0 mL min-1 and detection wavelength set at 220 nm. (bvsalud.org)
  • Clock-wise from the upper left: 130.2 g of C 8 H 17 OH (1-octanol, formula mass 130.2 amu), 454.4 g of HgI 2 (mercury(II) iodide, formula mass 454.4 amu), 32.0 g of CH 3 OH (methanol, formula mass 32.0 amu) and 256.5 g of S 8 (sulfur, formula mass 256.5 amu). (pressbooks.pub)
  • As used throughout the specification and appended claims, the term "alkyl" refers to a straight or branched chain hydrocarbon radical containing no saturation and having 1 to 8 carbon atoms. (justia.com)
  • Consistent with its definition as an amount unit, 1 mole of any element contains the same number of atoms as 1 mole of any other element. (pressbooks.pub)
  • Figure 1 Each sample contains 6.022 × 10 23 atoms -1.00 mol of atoms. (pressbooks.pub)
  • According to the definition of the mole, 12 g of 12 C contains 1 mole of 12 C atoms (its molar mass is 12 g/mol). (pressbooks.pub)
  • Our business has strived to establish a really efficient and stable personnel team and explored an effective high quality manage process for cas 111 87 5 1 octanol with low price make sure you mail your needs with a detailed list including the style/item and quantity you require. (azgshenyu.com)
  • Well, I have found that at high sample concentrations (~1 g /mL) and with small injection volumes (~0.5% of a column volume), you can get good results. (biotage.com)
  • Supplier, Manufacturer, Exporter of 4-Bromoiodobenzene or 1-Bromo-4-iodobenzene, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. (mubychem.com)
  • To report SUSPECTED ADVERSE REACTIONS, contact Amryt Pharmaceuticals DAC at 1-855-303-2347 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. (drugs.com)
  • To report SUSPECTED ADVERSE REACTIONS, contact Meda Pharmaceuticals Inc. at 1-800-526-3840 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch. (gnhindia.com)
  • The commercial route to produce 1-octene based on butadiene as developed by Dow Chemical came on stream in Tarragona in 2008. (wikipedia.org)
  • All industrial production processes for preparing formamide and its alkyl derivatives and also formic esters have hitherto utilized carbon monoxide as C 1 building block. (justia.com)
  • Carbon monoxide is a comparatively expensive C 1 building block. (justia.com)
  • The telomerization of butadiene with methanol in the presence of a palladium catalyst yields 1-methoxy-2,7-octadiene, which is fully hydrogenated to 1-methoxyoctane in the next step. (wikipedia.org)
  • For intranasal use only, the recommended dose is 1 spray per nostril twice daily in adults and adolescents 12 years of age and older. (rxlist.com)
  • It is a fixed dose combination product containing an antihistamine (H 1 receptor antagonist) and a corticosteroid as active ingredients. (rxlist.com)