The whole hull is sheathed with glass cloth and epoxy. (intheboatshed.net)
The epoxy strip planked and carbon sheathed hull is incredibly light and stiff. (seahorsemagazine.com)
Epoxy strip-planked construction has long been recognised as an affordable, lightweight and very stiff option and the hull of this 35ft boat weighs just 596kg. (seahorsemagazine.com)
The hull is then sheathed in glass and epoxy, creating a layer with excellent resistance to point impacts and thus protecting the timber from water ingress. (seahorsemagazine.com)
The yacht's hull is a wood-epoxy composite, constructed of laminated Douglas fir and sheathed with Xynole and epoxy. (oceannavigator.com)
Re the holes in the hull - for small holes you could glue on a plywood 'patch' on the inside and then fill the hole from the outside with epoxy filler. (boatdesign.net)
Or extend this a bit further, sand the hull exterior right back, and sheath the whole hull with glass cloth and epoxy, and seal all the interior with epoxy. (boatdesign.net)
Bottom of hull sheathed in lightweight fibreglass and epoxy resin on both sides for added stiffness.Great racing record being on average 1/3 of the top ten finishers, in both Vic states and National titles for over 5 years. (sabre.org.au)
Classically built using strip cedar construction with epoxy sheath, this Australian built catamaran, was meticulously built by Lightwave Yachts Managing Director, Roger Overell, in 1999. (lightwaveyachts.com)
Using Copper Ions, a protective field is established around your hull and running gear which combats barnacle growth, by creating an environment barnacles do not like therefore will not attach to your hull or running gear. (barnaclerid.com)
The hull was copper sheathed to prevent barnacles/hard shell growth. (barnaclerid.com)
Plywood3
The Secret has a round bilge hull built from plywood - see the photos below showing how this is done. (intheboatshed.net)
Chesapeakes are built to endure a lifetime of strenuous touring with 4mm-okoume plywood hulls and decks, both sheathed with fiberglass. (clcboats.com)
The hull is strip planked over a criss-crossed structure made of a plywood backbone, including centreboard case, and plywood transverse bulkheads. (vivierboats.com)
Mahogany2
Honduran mahogany hull sides, sides are foam cored, gunwales and trim, and teak deck. (csyc.org)
The hull is rendered in steel, and all superstructures are mahogany clad aluminum. (sy-gloria.com)
Deck6
Hull and Deck strapping - silicon bronze. (boatdesign.net)
After reading a 1987 Llewellyn Howland III article, The Burgess Legacy, the British couple began researching Niña's design and laid out a new interior plan to accommodate their live-aboard requirements, while keeping the hull, doghouse and flush deck as close as possible to the yacht's original drawings. (oceannavigator.com)
Formula Sailcraft can supply Sabres from bare hull/deck assembly to any stage of completion right through to full 'turn-key' rig and race. (sabre.org.au)
Foam sandwich glass hull with timber deck and transom giving the beauty and life of a timber boat with the stiffness and unrivalled fairness of a glass hull. (sabre.org.au)
The cockpit, rudder and stock were rebuilt, areas of the hull resplined, original Sparlight mast refurbished and finally new bronze deck hardware fitted from Classic Marine. (rbsmarine.com)
This model featured a traditional wood hull, sheathed in fiberglass, which allowed Chris Craft to accentuate its modern styling elements. (antiqueboatamerica.com)
Rudder1
Also made are fully moulded fibreglass/foam/balsa Sabre centreboards and rudder blades (foil shape optimized) as well as glass sheathed, white polyurethane finished rudder boxes with anodized alloy tillers. (sabre.org.au)
Teak1
All weather decks are sheathed in 5/8" seasoned teak. (sy-gloria.com)
Ballast1
To resolve the required heavy displacement (about 1 500 kg loaded) of such a traditional hull and the possibility for it to be trailered behind a car, I have fitted a water ballast tank and a steel centreboard. (vivierboats.com)
Fastenings1
Her hull was sheathed in metal early in 1853 and some fastenings were replaced with iron bolts. (tripod.com)
Ebihen1
Following the success of Ebihen, a beautiful hull, stable and seaworthy, I have been asked to design the same boat one metre longer, as most owners wish it to be. (vivierboats.com)
Expertly1
An extra-terrestrial being that guarantees a close encounter of a different kind, the Andromeda Sheath has expertly evolved from its predecessor into an all-new breed of alien. (sinnovator.com)
Decks2
CLC's signature cambered decks shed spray, increase the storage space inside the hull, add strength without weight, and look great. (clcboats.com)
The 16LT and 17LT are standard Chesapeake 16 & 17 hulls with lower decks and sides, reducing total volume by 20% for a sleeker, more compact kayak. (clcboats.com)
Whole hull1
My plan was to glass the whole hull so do you think a good idea would be to rip out all rotten hull? (boatdesign.net)
Cedar1
Essentially, we build a double chine hull, with a narrow, parallel-sided, intermediate chine panel, which is then packed out over-sized with cedar - triangle section down the edges, and square or rectangle section (about 3in thick) in the middle. (intheboatshed.net)
Outer1
Another genetic change softened the outer hull on the kernel. (org.in)
Marine1
I am interested in Marine Sacrificial Zinc Anode for Ship , Zinc Hull anode ISO DNV BV could you send me more details such as type, size, quantity, material, etc. (cathodicprotection-anodes.com)
Hatch1
The tank arrangement is quite simple : a drain plug in the hull and a dinghy-type inspection hatch cover just over. (vivierboats.com)
Transom1
The hull has some rot and transom needs replacing. (boatdesign.net)
Reinforce2
And if so, would it reinforce the hull and planking such that the hull strapping would be reinforced as well? (boatdesign.net)
Reinforce the inside with new wood replace outside hull with new wood? (boatdesign.net)
Bottom1
MOUNTED HALF HULL MODEL OF THE CLIPPER SHIP "FLYING CLOUD"20th CenturyModel with black painted hull, a red bottom, and a carved figurehead and trailboard. (liveauctioneers.com)
Built3
Our very first Spirit, a 37ft sloop, was built with a hull that could be lifted by four people and had no carbon at all. (seahorsemagazine.com)
The Lightwave 46 has 800L of fresh water & 800L of diesel, in tanks that are built directly into the hull. (lightwaveyachts.com)
Designed by Pieter Beeldsnijder, with a hull built by Jongert, and an interior finished by Lowland, Gloria is a unique and beautiful schooner - the modern interpretation of the famous 1936 A. Mylne designed Panda. (sy-gloria.com)
Surfaces2
Burgess' design has kept the wetted surfaces to a minimum, resulting in an easily driven hull. (oceannavigator.com)
Scanning electron microscopy of the fracture surfaces showed that the horn sheath has a layered structure and, more interestingly, the laminae have a rippled appearance. (silverchair.com)
Stem3
As for the stem, I have seen a video of a smaller boat, where the stem had a section far worse than my case and they cut it out, and laminated a new section over it, and then glassed the hull. (boatdesign.net)
He leaned on the hilt of his sheathed greatsword and chewed a grass stem with his graying russet-brown hair gleaming with raindrops as the rest came up, his shrewd little russet eyes missing nothing. (smstirling.com)
Placed on hulls, propeller shafts, rudders, trimtabs, outboard engines,stem drives, and in coding system of most inboard engines to protect metal parts from galvanic corrosion. (cathodicprotection-anodes.com)
Beam1
Flying Fish was registered at the Boston Custom House as a ship of 1,505 tons, with a hull length of 207 feet, and a beam of 22 feet. (modelexpo-online.com)
Interior1
And so, all the interior of the hull must be sealed also. (boatdesign.net)
Boat3
Take for example the the Carr's Curlew, which they sheathed because it was a tired worn out boat otherwise destined for the scrap heap. (boatdesign.net)
Utilized as the plug boat to create the production Lightwave 35 hulls, Film Star was proudly owned by the original owner for 20 years. (lightwaveyachts.com)
A boat hull that is free of barnacles means it is easier for your boat to maintain normal cruise speed and (WOT) speed. (barnaclerid.com)
Length1
Standing at 9.5 inches in insertable length and 7.7 inches in circumference, those that come up against the Andromeda Sheath should never attempt to conquer it without sufficient experience. (sinnovator.com)
Years1
Finally Clubmarine (Sydney office) would insure a timber, old (in their eyes - over 5 years), multi-hull, to go 200 nautical miles from the coast (covers Lord Howe Island as well) and coverage all around Australia cruising. (pbworks.com)
Hard1
Naturally, it was a grassy-like plant with many stems bearing small cobs with kernels sheathed in hard shells. (org.in)
Inches1
my main question is how should I go about fixing a rot hole and 4 by 4 inches in the hull? (boatdesign.net)
Seed casin1
It is filled with buckwheat hulls - the tiny seed casings of the buckwheat plant. (jlifeinternational.com)
A protective field is created between the electrodes by our computer controller, the field is wide enough to encompass your entire submerged hull. (barnaclerid.com)
Create1
The ion sheath so formed would create a buffer zone around the craft, ionizing, repelling and deflecting oncoming air molecules and thereby preventing them from directly impacting and heating the hull. (bibliotecapleyades.net)
Double1
The buckwheat hulls we use in our pillows are 100% organic, double cleaned, and grown here in the USA. (jlifeinternational.com)
Original1
We took the Chesapeake 17's beautiful lines and trimmed about 20% of the volume out of the hull for a sleeker, low-windage hull with the same great speed and tracking of the original. (clcboats.com)
High1
One technology that could prevent a Columbia-type hazard from happening in the future would be to apply a high voltage charge to the Space Shuttle hull during reentry, in particular to the leading edge of its wing. (bibliotecapleyades.net)
Maintenance1
The planking is sheathed for better resistance to chafe and to reduce maintenance. (vivierboats.com)
Supply1
Nicotine salts swiftly supply pure nicotine to your body as well as provide a silky smooth inhale, functioning perfectly with a sheath mod system. (syllableletterphoneme.shop)
Reduce1
Airframe electrification used in the B-2 bomber to reduce air drag and hull friction. (bibliotecapleyades.net)
Side1
The hull strapping is like a big 'X' on the side of each hull. (boatdesign.net)
Field1
These include an advanced shield dome atop its hull that sheathes its in a shimmering refractor field. (lexicanum.com)