Electronics solder. Medical search. Frequent questions

for example: Solder Bridge 1.verify amount of flux been aplied. (smtnet.com)
It involves heating the solder paste, which consists of solder particles suspended in flux, to melt the solder and create a strong bond between the components and the PCB. (cambridgenetwork.co.uk)
A flux pen is a must have when performing any kind of solder rework. (spikenzielabs.com)
Flux is normally added to help the solder flow from where it is not supposed to be (the jumper) to the wick. (spikenzielabs.com)
The problem was traced back to the liquid flux used with Rohs solder. (electronics-related.com)
Soldering is performed by quickly heating any metal parts you wish to join and then applying flux and solder to the surfaces of the parts, resulting in a solder joint: the metals are bonded to form an excellent electrical connection and a strong mechanical bond. (circuitspecialists.com)
Flux is a chemical cleaner that cleans the hot metal surfaces to better receive the molten solder. (circuitspecialists.com)
Most soldering jobs can be performed using flux-cored solder, which is solder with the flux embedded in the core of the solder wire, as long as the surfaces being joined are free from rust, grease, or dirt. (circuitspecialists.com)
Using mild flux (no-clean flux) that will not properly remove normal oxides from soldering iron tips. (circuitspecialists.com)
The use of the correct solder, solder flux , and avoiding oxidation are all important components of the soldering process. (circuitspecialists.com)
The solder also includes a flux which helps the solder to flow onto the wire and pad. (penguintutor.com)
A solder paste is essentially powdered solder suspended in flux paste. (wikipedia.org)
The tackiness of the flux holds components in place until the soldering reflow process melts the solder. (wikipedia.org)
According to IPC standard J-STD-004 "Requirements for Soldering Fluxes", solder pastes are classified into three types based on the flux types: Rosin based fluxes are made with rosin, a natural extract from pine trees. (wikipedia.org)
These fluxes can be cleaned if required after the soldering process using a solvent (potentially including chlorofluorocarbons) or saponifying flux remover. (wikipedia.org)

Description: Do you need to remove the oxidation and surface contamination from your soldering iron tip? (spikenzielabs.com)
A dry tip caused by storing the tip without a thin coating of solder, thus allowing oxidation to build on the tip. (circuitspecialists.com)
The very large surface area of the minute solder spheres, means that oxidation can present a very great problem. (nod-pcba.com)
To produce a quality solder joint, it's very important for the spheres of metal to be very regular in size and have a low level of oxidation[citation needed]. (wikipedia.org)

Description: The Hakko FX-901 is a cordless soldering iron that is both portable and practical and provides you with a means to easily solder on the. (spikenzielabs.com)
You will search with the brand name like with this phrase - "Hakko soldering iron" to find deal. (thecustomizewindows.com)

It might be a couple simple solder joints, or require special reflow tools. (sparkfun.com)
In this blog post, we will explore the significance of leaded solder reflow machines in contract electronics manufacturing and why they continue to be relevant. (cambridgenetwork.co.uk)
Reflow soldering is a widely used process in contract electronics manufacturing for attaching surface-mount components to PCBs. (cambridgenetwork.co.uk)
The reflow soldering process is typically carried out using reflow ovens or reflow soldering machines. (cambridgenetwork.co.uk)
Compatibility: Leaded solder reflow machines are specifically designed to work with tin-lead solder alloys. (cambridgenetwork.co.uk)
They provide the precise temperature profiles required to melt and reflow leaded solder effectively. (cambridgenetwork.co.uk)
Leaded solder reflow machines ensure that these critical components are manufactured to the highest quality standards. (cambridgenetwork.co.uk)
Leaded solder reflow machines offer the flexibility to handle mixed assemblies while maintaining soldering quality. (cambridgenetwork.co.uk)
Leaded solder reflow machines continue to be indispensable tools in contract electronics manufacturing, especially for high-reliability applications. (cambridgenetwork.co.uk)

If old solder is used there is a distinct risk of a much higher defect rate, and the cost of any rework incurred would be well beyond the cost of replacing the solder paste. (nod-pcba.com)

This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. (sparkfun.com)
Solder Paste Stenciling is the easiest and quickest way to solder some of the trickier SMD components. (sparkfun.com)
Here at SparkFun, we use solder paste stenciling on pretty much all of our boards. (sparkfun.com)
Although this Solder Paste comes in 100g containers, it contains 50g of paste. (sparkfun.com)
I recommend having T5 solder paste in stock which is a little more expensive but can handle stencils with holes 0.2mm-0.3mm. (sparkfun.com)
Could I use this paste to solder .008" brass wire to etched brass parts with a regular soldering iron? (sparkfun.com)
The solder paste is currently stored at room temperature (so around 68-73 °F) with the rest of the stock at SparkFun. (sparkfun.com)
We have been having problems with solder paste balls around fine pitch ICs and have decided that cleaning the boards in an ultra sonic cleaner may reomove these solder balls. (smtnet.com)
Nihon Superior Co. Ltd., a supplier of advanced joining materials, is pleased to introduce its LF-C2 Lead-Free Solder Paste. (electronicsforu.com)
In order to ensure that the solder paste is suitable for proving the highest performance for PCB assembly it is necessary to ensure that it maintains the required properties. (nod-pcba.com)
To achieve this it is imperative that the solder paste is stored correctly. (nod-pcba.com)
In view of the way in which solder paste can degrade, it also has a defined shelf life and it should not be used after its end date. (nod-pcba.com)
Solder paste is used in the manufacture of printed circuit boards to connect surface mount components to pads on the board. (wikipedia.org)
It is also possible to solder through-hole pin in paste components by printing solder paste in and over the holes. (wikipedia.org)
A majority of the defects in circuit-board assembly are caused due to issues in the solder-paste printing process or due to defects in the solder paste. (wikipedia.org)
Head-in-pillow defects, or incomplete coalescence of ball grid array (BGA) sphere and solder paste deposit, is a failure mode that has seen increased frequency since the transition to lead-free soldering. (wikipedia.org)
Often missed during inspection, a head-in-pillow (HIP) defect appears like a head resting on a pillow with a visible separation in the solder joint at the interface of the BGA sphere and reflowed paste deposit. (wikipedia.org)
An electronics manufacturer needs experience with the printing process, specifically the paste characteristics, to avoid costly re-work on the assemblies. (wikipedia.org)
When making PCBs (printed circuit boards), manufacturers often test the solder paste deposits using SPI (solder paste inspection). (wikipedia.org)
In using solder paste for circuit assemblies, one needs to test and understand the various rheological properties of a solder paste. (wikipedia.org)
in-house testing is sometimes needed to judge the remaining usability of solder paste after a period of use. (wikipedia.org)
Thixotropic index Solder paste is thixotropic, meaning that its viscosity changes with applied shear force (such as stirring or spreading). (wikipedia.org)
The thixotropic index is a measure of the viscosity of the solder paste at rest, compared to the viscosity of "worked" paste. (wikipedia.org)

Description: This is an ET Series replacement soldering tip for the Weller WE1010 soldering station. (spikenzielabs.com)
Description: This is a replacement soldering tip for the Weller WLC100 soldering iron. (spikenzielabs.com)
This time we have this pleasant occasion to make so at soldering equipment from company Weller. (electronics-lab.com)

The biggest change happened at components, which are usually the most costly - at soldering (and desoldering) stations. (electronics-lab.com)
Revering of soldering is done by Desoldering with usually a different instrument. (thecustomizewindows.com)

We will not discuss about Butane Powered Irons, Battery Powered Irons, Soldering Torches, Soldering Guns and Cold-Heat Soldering. (thecustomizewindows.com)
Pencil soldering irons are pathetic. (thecustomizewindows.com)

It may melt solder very quickly and make it really easy to heat up large component leads quickly, such as those on connectors. (thecustomizewindows.com)
It goes without saying that an iron that is hot enough to melt solder could easily burn skin. (penguintutor.com)

How to solder very thin stranded wire? (electronics-related.com)
Next is supply of the metal for soldering and finally some wire cutters. (thecustomizewindows.com)
Wire cutter, Soldering iron and Solder would work fine for the first month. (thecustomizewindows.com)
You may buy a $5 solder iron as use and throw material but do not buy a use and throw plier or wire cutter. (thecustomizewindows.com)
I'd argue that these heat shrink solder connectors with waterproof adhesive provide a lot of mechanical connection beyond the solder, especially when compared to what's otherwise possible with wire gauges thinner than 22 AWG. (panbo.com)
Note how one black wire is already fished through the heat shrink tube and twisted together with its mate, but the connector has not yet been worked along the joined wires to position the solder sleeve over the twisted bare strands, as I have done with the red pair. (panbo.com)
Lastly I carefully applied heat to the black and red connectors until the pre-fluxed solder bonded with the wire strands and the adhesive end bands flowed as the tubing shrank, as evident in the blue wire splice. (panbo.com)
For this reason it's important to place the soldering iron into a holder and ensure that the wire is not going to get pulled. (penguintutor.com)

The wave solder warrior is back. (smtnet.com)
Does anyone know if there are specific tools designed to remove fingers from the wave solder rails? (smtnet.com)
Cleaning wave solder pallets. (smtnet.com)
How do you clean wave solder pallets of fluxes in your facility? (smtnet.com)
Our wave solder pallets are cleaned via our inline board washing machine. (smtnet.com)
We are going through the motions of acquiring and setting up a new to us wave solder machine. (smtnet.com)
Does anyone know where I can find a list of things to do to when troubleshooting issues during the wave solder process? (smtnet.com)
In olden days, we used to pour oil on the wave solder pot to limit dross formation and loosen-up the solder. (smtnet.com)

This balanced performance is achieved by using calibrated levels of the two key strengthening tools available in solder alloy formulation, stable dispersed particles combined with solid solution strengthening of the tin matrix. (electronicsforu.com)
FineSol aims to deliver at first stage an integrated production line for solder particles with size 1-10 μm and to formulate solder pastes containing these particles. (europa.eu)

This is currently limited by the availability of hyper fine pitch solder powder pastes. (europa.eu)
As a result of environmental legislation, most solders today, including solder pastes, are made of lead-free alloys[citation needed]. (wikipedia.org)
Solder pastes are classified based on the particle size by IPC standard J-STD 005. (wikipedia.org)

The demand of the automotive industry for solder alloys that deliver long life in conditions of extreme thermal cycling has resulted in the development of alloys that are very hard. (electronicsforu.com)
While these hard alloys are resistant to the plastic deformation that drives failure in thermal cycling, the trade-off is that their hardness means that they have a tendency to crack when exposed to the other stresses to which automotive electronics is subjected in service. (electronicsforu.com)

You'll need basic soldering tools such as an iron, solder, and diagonal cutters. (adafruit.com)
Undoubtedly,improved output results from expertise, attending IPC-certified courses such as IPC-a-620 training , and utilizing the proper tools for producing electronics, but there's much more to it than that. (solder.net)
We have got electronics simulators, modern CAD software and software development tools for several microcontroller platforms. (lu.se)
The lab has soldering equipment, a large array of precision tools, and a basic mechanical workshop to be able to manufacture prototypes and service equipment. (lu.se)

This results in strong, reliable solder joints. (cambridgenetwork.co.uk)
Easier Process Control: Leaded solder's lower melting point allows for more straightforward process control, reducing the likelihood of defects such as solder bridges or cold joints. (cambridgenetwork.co.uk)
The CTE of your board and solder joints will typically be 18-22ppm. (smtnet.com)
Quality solder joints are a combination of proper technique as well as proper soldering equipment and materials. (circuitspecialists.com)

Hence, solder wick is sometimes called desolder braid. (spikenzielabs.com)
The solder will barely melt when touched to the braid opposite the iron. (electronics-related.com)

The solder melts at a much lower temperature than the components being soldered so that it can be melted with a soldering iron. (penguintutor.com)
There are many different types of defects possible, e.g. too much solder, or the solder melts and connects too many wires (bridging), resulting in a short circuit. (wikipedia.org)

It makes soldering much more pleasant by sucking the smoke and fumes up and. (spikenzielabs.com)
Although most solder is now lead-free the fumes from soldering are still toxic. (penguintutor.com)
I normally do my soldering in a well vented room and avoid breathing in the fumes, but you can buy soldering extractor fans if you are concerned. (penguintutor.com)
An industrial hygiene investigation was conducted to determine if workers were adversely affected by exposure to methyl -ethyl- ketone (78933) (MEK), 1,1,1-trichloroethane (71556) ( methyl -chloroform), and soldering fumes. (cdc.gov)

Skill Level: Competent - You will encounter surface mount components and basic SMD soldering techniques are required. (sparkfun.com)
The boards are surface mount top side and conventional components wave soldered. (smtnet.com)
Enhanced Wetting: Leaded solder offers excellent wetting properties, ensuring proper adhesion between the solder and the components being soldered. (cambridgenetwork.co.uk)
Mixed Assembly: Some electronics assemblies require a combination of leaded and lead-free components. (cambridgenetwork.co.uk)
Soldering works by melting a metal alloy, called solder, to form a joint between components, wires and / or a circuit board. (penguintutor.com)
Ensure that there is sufficient solder to make a good joint (if not repeat) and that it does not bridge to any other components or pads. (penguintutor.com)
Solder is the essential item that joins two or more components together in such a DIY electronics. (usahify.com)
SPI systems measure the volume of the solder pads before the components are applied and the solder melted. (wikipedia.org)
The electronics lab monitors the development of new technologies and devices for the commercial market and identifies components that might be interesting for research in Biology. (lu.se)

Description: This adjustable-temperature soldering iron is a great tool for when you don't want to break the bank but need a reliable iron to get the. (spikenzielabs.com)
It is a step by step guide that shows how to convert a regular plug-in soldering iron into a temperature controlled unit. (electronicsinfoline.com)
A 30-40 watt fixed-temperature iron will be on the hot side for electronics work. (thecustomizewindows.com)
So I was intrigued at first sight with this relatively new type of heat shrink butt connector that uses low-temperature solder instead of a crimping sleeve, and so far I'm quite impressed with the results. (panbo.com)

I think it would provide better control than solder because I can't have blobs of any kind - this is a 1:160 scale handrail for a model locomotive. (sparkfun.com)
I made big solder blobs on 0805 SMD pads (spacing bet. (electronics-related.com)

While there has been a growing shift towards lead-free soldering in recent years due to environmental concerns, leaded solder still has its place in certain applications, particularly in industries where performance and reliability are paramount. (cambridgenetwork.co.uk)
Lower Melting Point: Leaded solder has a lower melting point compared to lead-free alternatives, making it easier to work with during the soldering process. (cambridgenetwork.co.uk)
While the industry has witnessed a gradual shift towards lead-free soldering due to environmental concerns, the unique properties and reliability of leaded solder make it an irreplaceable choice in specific industries. (cambridgenetwork.co.uk)
Nihon Superior continues to offer solutions to the challenges facing the electronics industry, such as improvements in reliability, thermally stable connections, and lead-free die attach. (electronicsforu.com)
Though new environmental regulations have lead to the rise of lead-free solder, most solder is made from tin and lead. (circuitspecialists.com)

Solder Wick #2 5ft. (spikenzielabs.com)
Solder wick is a composed of copper threads braided together. (spikenzielabs.com)
Yes, you really can solder anything, and solder wick is a large part of the process. (spikenzielabs.com)
We tried a lot of cheaper solder wick before finding this supplier. (spikenzielabs.com)

SPI systems can reduce the incidence of solder-related defects to statistically insignificant amounts. (wikipedia.org)

Solder is an alloy of non-ferrous materials with a low melting point. (circuitspecialists.com)

Description: This is a small metal soldering iron stand with integrated brass soldering iron tip cleaning sponge. (spikenzielabs.com)

It should be evident that a worker in an assembly line knows how to operate a soldering iron properly. (solder.net)
We research, develop, and manufacture advanced electronics assembly materials solutions to the challenges of today, tomorrow, and the future. (indium.com)

If you are buying electronic parts, batteries, soldering equipment, audio, video and data cables, connectors and adapters or any of the thousands of parts that we stock, at Kiesub you will get competitive pricing and be served by friendly, knowledgeable sales & counter personnel. (kiesub.com)
Despite its many positive impacts, the industry also faces some challenges connected with the enormous quantity of raw materials that it needs for sustainability, the huge quantity of Waste Electrical, Electronics Equipment (WEEE) generated and the threat of competition from Asia. (europa.eu)

Is the opacity of a solder mask an issue of the mask material it self? (maker.pro)

Leaded solder, often referred to as tin-lead solder, has been the standard in electronics manufacturing for many decades. (cambridgenetwork.co.uk)
How Can You Be Certain That Your Technicians Are Proficient At Manufacturing Electronics? (solder.net)
It can be worrisome to contemplate the number of places in your electronics manufacturing where one person's judgment of "excellent" or "best practice" may differ greatly from another, given that growing competency is definitely more involved than simply giving over a certificate. (solder.net)
It is high time you know your team's competency and proficiency to establish your company name in manufacturing electronics. (solder.net)

Free e-zine with select content and advertisements of Electronics For You. (electronicsforu.com)

And the heat shrink solder sleeves were fairly easy and quick to use. (panbo.com)
If you dig into the more negative reviews of Amazon's many solder sleeve brands , a fairly common complaint is how easy it is to overheat (torch) the shrink tube before melting the solder. (panbo.com)

To Better to Build a Soldering Toolkit, there is Need to Know the Basics. (thecustomizewindows.com)

MarVac Electronics is a distributor of many different manufacturer's products. (marvac.com)
Products sold by MarVac Electronics are not specifically designed, manufactured or intended for critical use in end products which are used for nuclear facilities applications, human implantable devices or life support systems. (marvac.com)
More than 3,000,000 EVs are on the road with Indium Corporation's proven solder and thermal management products for high reliability. (indium.com)
Discover how our electronics expertise and proven products are driving e-Mobility. (indium.com)

DIY Signal Generator Kit - Function Generator Soldering Project Learn or practice your soldering skills while creating your own DIY signal generato. (circuitspecialists.com)

In our offer can also be found selected types of original soldering tips and any other types can be supplied to you in a short leadtime and at convenient conditions. (electronics-lab.com)
Instead of buying all the stuffs together, give importance to buying a good soldering iron which replaceable tips or just buy an ordinary pencil tip soldering iron with the risk of overheating. (thecustomizewindows.com)
Just few weeks ago, the maker Electronoobs announced the Homemade Soldering Iron v1.0, but unfortunately it encountered many problems from the beginning: the design was held back by the quality of the $5 replacement soldering iron tips he designed. (open-electronics.org)

Proven Reliability: Leaded solder has a long history of use in various industries and has demonstrated exceptional reliability, especially in applications where durability and performance are critical. (cambridgenetwork.co.uk)
High-Reliability Applications: In industries such as aerospace, automotive, and medical devices, where reliability is paramount, leaded solder remains a preferred choice due to its proven track record. (cambridgenetwork.co.uk)

One critical aspect of this process is soldering. (cambridgenetwork.co.uk)
Soldering is a learned process developed through experience. (circuitspecialists.com)
The following explains the process for soldering a component onto a board. (penguintutor.com)

I've started a series on comparing some of the possible candidate soldering stations, spanning beginner through to professional stations. (eevblog.com)

A solder joint consists of the component lead and the circuit traces on a printed circuit board. (circuitspecialists.com)

Make your own with this easy to solder real time watch kit from SpikenzieLabs! (adafruit.com)

The heat is supplied with a soldering iron. (circuitspecialists.com)

Tin/Lead solder is usually expressed by the percentages of each material present - for example, 60/40 solder contains 60% tin & 40% lead - and the melting point is determined by the mixture of solder. (circuitspecialists.com)

After soldering the Solder:Time, the watch is built by stacking the acrylic parts with the PCB and holding it together with the included screws. (adafruit.com)
This is achieved by using a hot soldering iron which heats up both parts of the solder joint and the solder. (penguintutor.com)

Description: This compact but 50W-powerful stationary soldering iron is a great entry-level soldering station. (spikenzielabs.com)
This post shows how to build a do it yourself 110 volt soldering station. (electronicsinfoline.com)
With this soldering station, you'll have everything you need to be the ultimate solder soldier. (ifixit.com)

Don't let blown capacitors or fried transistors stop your electronics! (ifixit.com)

Diseases2

Chemicals and Drugs16

Analytical, Diagnostic and Therapeutic Techniques and Equipment18

Phenomena and Processes3

Disciplines and Occupations4

Technology, Industry, Agriculture13

Information Science3

Health Care3

Flux15

Oxidation4

Hakko2

Reflow9

Rework1

Paste23

Weller3

Desoldering2

Irons2

Melt solder2

Wire8

Wave solder8

Particles2

Pastes3

Alloys2

Tools4

Joints4

Braid2

Melts2

Fumes4

Components9

Temperature4

Blobs2

Lead Free5

Wick4

Defects1

Alloy1

Sponge1

Assembly2

Equipment2

Mask1

Manufacturing4

Content1

Shrink2

Toolkit1

Products4

Practice1

Tips3

Reliability2

Process3

Beginner1

Consists1

SpikenzieLabs1

Supplied with a sold1

Mixture1

Parts2

Station3

Transistors1