• Inside root canals, the light power could not be enough to cure the resin cement, mainly at apical area. (bvsalud.org)
  • The study s factors were resin cement Enforce (Dentsply Ind. (bvsalud.org)
  • Chen L, Gleave C, Suh B. New self-adhesive resin cement with alkaline pH. (therafamily.com)
  • Abutment analogs in both groups were scanned using a laboratory scanner, and the restorations were designed, manufactured, and cemented with resin cement over the corresponding group. (bvsalud.org)
  • Veneers require less extensive shaping beforehand than dental crowns and the procedure can be done on as many teeth as you wish. (bhdentists.com)
  • The purpose of the study was to compare the bond strength and marginal adaptation of nano-ceramic hybrid composite crowns cemented to stock cement-retained abutments to lithium disilicate crowns. (bvsalud.org)
  • The debonding force value for resin nano-ceramic crowns (284.30 ± 26.44 N) was significantly higher than that for lithium disilicate crowns (253.30 ± 33.26 N). Adhesive failure mode was detected in all the specimens in both groups. (bvsalud.org)
  • According to their curing, the resin cements are divided into those chemically activated (self-cured), those physically activated by light (light-cured) and those presenting both activation systems (dual-cured). (bvsalud.org)
  • Indirect ceramic restorations are frequently used to restore the function and esthetics of vital and non-vital teeth as well as dental implants. (cdeworld.com)
  • With recent advancements in CEREC (chairside economic reconstruction of esthetic ceramic) and its massive adoption, clinicians and dental assistants are now more involved in the manufacturing process of indirect ceramic restorations and need to understand the clinical indications for the various ceramic materials and their respective manufacturing, finishing, and cementation protocols. (cdeworld.com)
  • Additionally, a simple manual polishing or light-curing stain/glaze protocol can facilitate the delivery of these restorations in one visit. (cdeworld.com)
  • Anterior restorations refer to dental treatments or procedures performed on the front teeth, specifically on incisors and canines. (gc.dental)
  • Dental ceramics are a common material of choice for anterior indirect restorations. (gc.dental)
  • To provide patients with a desirable result when planning anterior restorations, dentist must understand several key principles. (gc.dental)
  • The holding of these posts is executed through bonding to root dentin by using adhesive systems and resin cements 13 . (bvsalud.org)
  • Therefore, the aim of this study was to evaluate in vitro the bond strength of dual-cured resin cements to root dentin, at different deeps, employed in the cementation of intraradicular posts through push out test. (bvsalud.org)
  • TheraCal LC, the first Thera product created by BISCO , is a light-cured, resin-modified calcium silicate that is designed to stimulate dentin bridge formation, encourage pulpal survivability, and maintain desirable physical properties. (therafamily.com)
  • The space in a tooth bounded by the dentin and containing the dental pulp. (lookformedical.com)
  • Millions of patients have successfully been treated with dental implants but why is there still so much confusion - to probe, or not to probe? (vivalearning.com)
  • BACKGROUND: Titanium is a commonly used material for dental implants owing to its excellent biocompatibility, strength-to-weight ratio, corrosion resistance, lightweight nature, hypoallergenic properties, and ability to promote tissue adhesion. (bvsalud.org)
  • This research comprehensively studies Ti metal's mechanical properties, structural stability, and surface properties for dental implants. (bvsalud.org)
  • Epoxy resins are often used as dental materials. (lookformedical.com)
  • Smooth-On is one of the worlds leading manufaturers 3D modeling materials such as mold-making, casting and special effects materials but also industrial casting resins, adhesives and equipment. (formx.eu)
  • An example is shown below depicting a mixture of monomers, oligomers, and photoinitiators that conform into a hardened polymeric material through a process called curing. (wikipedia.org)
  • Typically a photopolymer consists of a mixture of multifunctional monomers and oligomers in order to achieve the desired physical properties, and therefore a wide variety of monomers and oligomers have been developed that can polymerize in the presence of light either through internal or external initiation. (wikipedia.org)
  • Although initiated independently, both mechanisms of curing start a dynamic formation of free radicals and conversion of monomers which naturally are overlapped during the curing phase 21,23 . (bvsalud.org)
  • This in vitro study assessed the bond strength of resin cements used for post cementation to different root regions. (bvsalud.org)
  • Different resin cements with their respective adhesive systems may be used for the cementation of the posts. (bvsalud.org)
  • Such materials have different composition, amount and size of filler particles 5,9 , as well as characteristics and protocol of cementation which in addition to the cement curing may interfere in the bonding to tooth surface 3,6 . (bvsalud.org)
  • The proper curing of resin cements may influence on the mechanical properties of the agents and on the bonding of the resin cements to tooth substrates 7,11 . (bvsalud.org)
  • There is absolutely NO or minimal preparation or removal of tooth structures required, and with our comfortable, convenient office location in Beverly Hills, there is no better environment for the utmost quality dental care. (bhdentists.com)
  • The general cost of our dental veneer service in Beverly Hills is from $600 to $3,000 per tooth, scroll down for a more detailed look at our pricing options and factors that affect the price per tooth. (bhdentists.com)
  • There are many significant differences between a natural tooth and a dental implant that must be considered. (vivalearning.com)
  • Dental Post and Dental Core is a dental restoration used to sufficiently build-up tooth structure for future restoration like when there is not enough tooth structure to properly retain the crown. (pinkblue.in)
  • Flowable "base" bulk-fill composites seem most suitable for narrow cavities deeper than 4 mm, in particular when a higher adaptation potential thanks to better flowability in less accessible cavity configurations is desirable. (quintessence-publishing.com)
  • The seepage of fluids, debris, and micro-organisms between the walls of a prepared dental cavity and the restoration. (lookformedical.com)
  • This study discusses the application of Density Functional Theory (DFT) in evaluating dental implant materials' mechanical properties and structural stability, with a specific focus on titanium (Ti) metal. (bvsalud.org)
  • This study demonstrates the application of DFT in evaluating dental implant materials, focusing on titanium, and provides valuable insights into their mechanical properties, structural stability, and surface characteristics. (bvsalud.org)
  • Dr. Cannon received his Doctorate of Dental Surgery from the University of Nebraska and his Masters of Pediatric Dentistry from Northwestern University. (therafamily.com)
  • What makes Bedford Dental Group different is our approach to aesthetic dentistry - we study your face and work closely with facial plastic surgeons to understand the intricacies of your face and give you a perfect smile . (bhdentists.com)
  • [1] Unfortunately, due to lack of evidence, poor preservation of bodies, and primitive technology, little research was carried out on dental braces until around the 17th century, although dentistry as a profession was by then making great advancements. (naturalpainrelief.org)
  • No department of physiology or surgery has of late years made greater progress than that connected with the teeth, and this advance has been necessarily attended by a corresponding increase in the literature of the sub- ject, which has now become so voluminous as to form a source of embarrassment to those who are entering upon a course of dental education. (nih.gov)
  • Under these circumstances the projectors of the "Student's Guide" manuals have considered a work on Dental Anatomy and Surgery a desirable addition to the series. (nih.gov)
  • CONCLUSIONS: The findings of this study contribute to the understanding of dental implant material behavior and aid in the design of improved materials with long-term biocompatibility and stability in the oral environment. (bvsalud.org)
  • In cases where a dental lab is used, there are usually two dental appointments required to place an indirect restoration. (gc.dental)
  • One of the advantages of photo-curing is that it can be done selectively using high energy light sources, for example lasers, however, most systems are not readily activated by light, and in this case a photoinitiator is required. (wikipedia.org)
  • Most commonly, photopolymerized systems are typically cured through UV radiation, since ultraviolet light is more energetic. (wikipedia.org)
  • However, the development of dye-based photoinitiator systems have allowed for the use of visible light, having the potential advantages of being simpler and safer to handle. (wikipedia.org)
  • Silicone surfaces to be painted can only be Platinum (addition) cured systems. (formx.eu)
  • Porcelain veneers are thin, custom-crafted shells of dental porcelain and are bonded to your natural teeth. (bhdentists.com)
  • When preparing for dental veneers, a digital impression can be taken before the teeth are reshaped. (bhdentists.com)
  • Because digital impressions are so precise, they help ensure that your dental veneers will have an accurate fit, which is essential for the protection of your teeth and the aesthetics of your smile. (bhdentists.com)
  • Some people may have naturally misshapen or malformed front teeth, which can affect their smile and overall dental aesthetics. (gc.dental)
  • Dental braces (also known as braces , orthodontic cases , or cases ) are devices used in orthodontics that align and straighten teeth and help to position them with regard to a person's bite, while also working to improve dental health. (naturalpainrelief.org)
  • Dental braces are often used in conjunction with other orthodontic appliances to help widen the palate or jaws and to otherwise assist in shaping the teeth and jaws. (naturalpainrelief.org)
  • Around 400-300 BC, Hippocrates and Aristotle contemplated ways to straighten teeth and fix various dental conditions. (naturalpainrelief.org)
  • [1] The Etruscans buried their dead with dental appliances in place to maintain space and prevent collapse of the teeth during the afterlife. (naturalpainrelief.org)
  • High light sensitivity of the material allows for the use of the adhesive, not only for bonding the translucent (plastic or ceramic) brackets, but also, light impermeable metal ones. (osecompany.com)
  • It is a two component translucent clear platinum-cure silicone that is used to make a base for color pigmenting. (formx.eu)
  • Immediate photo-activation assures the initial stability necessary for supporting the masticatory tensions while chemical activation assures the reaching of the maximum properties of the cement as time goes by 8 . (bvsalud.org)
  • UV curing in industrial processes has greatly expanded over the past several decades. (wikipedia.org)
  • Angle contributed greatly to the design of orthodontic and dental appliances, making many simplifications. (naturalpainrelief.org)
  • However, alternative materials, such as titanium alloys (Ti-Al-2 V) and zirconia, are available for dental implant applications. (bvsalud.org)
  • RESULTS: The findings were compared with those of Ti-Al-2 V and zirconia to assess the advantages and limitations of each material for dental implant applications. (bvsalud.org)
  • In some instances, an enamel can cure in a fraction of a second when exposed to light, as opposed to thermally cured enamels which can require half an hour or longer. (wikipedia.org)
  • This type of restoration can be entirely fabricated inside the mouth without the need of a dental laboratory. (gc.dental)
  • Master-Dent Light Cure Orthodontic Adhesive represents a state-of-the-art technology, offering the most desirable characteristics, from the point of view of versatility, ease of handling, aesthetics and reliability. (osecompany.com)
  • These changes are often manifested structurally, for example hardening of the material occurs as a result of cross-linking when exposed to light. (wikipedia.org)
  • It is in many dental formulations, especially for root canal filling. (lookformedical.com)
  • The result of photo-curing is the formation of a thermoset network of polymers. (wikipedia.org)
  • In the permanent dentition, most traumatic dental injuries (TDI) result in crown fractures and minor luxation injuries. (pocketdentistry.com)
  • Nitrocellulose Thinners: Applications and Benefits Nitrocellulose thinners are widely used in the paint, lacquer, and varnish industries, as well as in the production of thinners, coatings, and adhesives. (niir.org)
  • ICPA Xicaine Lignocaine Hydrochloride & Adrenaline Bitartrate Injection I.P. 2% with Adrenaline 1:80,000 30mL vial (30049099) is a local anesthetic used by dental and medical professionals to numb the area of the body being worked on during a surgical or medical procedure. (medentrx.com)
  • A meta-analysis has suggested that almost one billion of the current world population have sustained traumatic dental injuries (TDI) to their permanent dentition [ 1 ]. (pocketdentistry.com)
  • Photoinitiators are compounds that upon radiation of light decompose into reactive species that activate polymerization of specific functional groups on the oligomers. (wikipedia.org)
  • In order to satisfy this, liquid neat oligomer can be doped with either anionic or cationic photoinitiators that will initiate polymerization only when radiated with light. (wikipedia.org)
  • Air-particle abrasion with 50-µm aluminum oxide particles is required to augment the surface roughness and area, which is desirable to achieve maximum mechanical retention and interlocking. (cdeworld.com)
  • These types of restoration are used to treat more severe cases and can be fabricated in a dental lab or in an in-office milling machine. (gc.dental)
  • A photopolymer or light-activated resin is a polymer that changes its properties when exposed to light, often in the ultraviolet or visible region of the electromagnetic spectrum. (wikipedia.org)
  • Dual-cured resin cements were developed in an attempt to combine the desirable properties of both chemical and light activation 21 . (bvsalud.org)
  • Several important dentists helped to advance dental braces with specific instruments and tools that allowed braces to be improved. (naturalpainrelief.org)
  • The resin cements RelyX ARC and Enforce presented greater bond strength than Panavia and the bond strength was higher at the cervical region. (bvsalud.org)
  • In these cases, the chemical activation of dual-cured cements may compensate the difficult of curing by the light 21 . (bvsalud.org)
  • Photopolymers undergo a process called curing, where oligomers are cross-linked upon exposure to light, forming what is known as a network polymer. (wikipedia.org)
  • The general process involves doping a batch of neat polymer with small amounts of photoinitiator, followed by selective radiation of light, resulting in a highly cross-linked product. (wikipedia.org)
  • In ionic curing processes, an ionic photoinitiator is used to activate the functional group of the oligomers that are going to participate in cross-linking. (wikipedia.org)
  • Even for some of the most repetitive procedures, we still must deal with factors like blood, saliva, unruly tongues, and chubby cheeks, when addressing dental disease. (vivalearning.com)
  • Our modern Beverly Hills office is equipped with state-of-the-art technology to ensure you leave with perfectly fitted dental veneers. (bhdentists.com)