• We report on a transient liquid assisted growth process capable of achieving ultrafast growth rates (100 nm s −1 ) and high critical current densities (5 MA cm −2 at 77 K). This is based on the kinetic preference of Ba-Cu-O to form transient liquids prior to crystalline thermodynamic equilibrium phases, and as such is a non-equilibrium approach. (nature.com)
  • Lyotropic liquid crystals are equilibrium structures comprised of liquids and surfactant, such as lamellar sheets, hexagonally packed columns, and wormlike micellar phases that form spontaneously through thermodynamic self-assembly. (rroij.com)
  • Many molten materials do not crystallized to their parent crystalline phases once the thermodynamic melting temperature Tm is passed on cooling. (niir.org)
  • What we've done is large-scale data mining on nearly 30,000 observed materials to explicitly measure the thermodynamic scale of metastability, as a function of a wide variety of parameters, like chemistry and composition, which inorganic chemists and materials scientists can use to build intuition,' Sun said. (materialstoday.com)
  • The Maxwell and Generalized Maxwell models fit the linear viscoelastic functions of micellar and hexagonal phases respectively, fairly well. (csic.es)
  • Although some lyotropic liquid crystalline phases, also known as 'micellar phases', 'mesophases', and ' microemulsions ', may appear to be similar to nanoemulsions in composition and nanoscale structure, such phases are actually quite different. (rroij.com)
  • This thesis reports the development of micellar crystalline morphologies in a selective solvent. (uni-bayreuth.de)
  • As crystallization takes place in the PEO core, a fast quenching into liquid nitrogen results in the formation of crystalline micelles retaining the shape present in the molten state at 70°C (pathway A). In the case of pathway B, the competition between the PEO core crystallization and the self-assembly of the micellar units, is the driving force that dictates the morphological development, therefore crystallization breaks out the melt morphology. (uni-bayreuth.de)
  • Finally, the micellar morphology diagram of the PB-b-PEO block copolymers has been studied as a function of the crystallization temperature and molecular composition of the blocks via two thermal pathways. (uni-bayreuth.de)
  • Herein, the mechanism underlying the aforesaid decrease was systematically studied by measuring contact angles, surface potential, adhesion force, crystalline structures, chemical compositions, and morphologies of the REO films. (asemlab.org)
  • The phase diagram of solution morphologies as a function of the molecular composition of the semicrystalline poly(butadiene)-b-poly(ethylene oxide)(PB-b-PEO) block copolymers was investigated. (uni-bayreuth.de)
  • The crystalline morphologies discussed here have been generated from selective solvent condition (70°C in n-heptane) via two thermal pathways: (A) by direct immersion into liquid nitrogen, where n-heptane becomes a poor solvent for both blocks at very low temperatures, and (B): by quenching to the crystallization temperature of the PEO, i.e., determined by the length of PEO block. (uni-bayreuth.de)
  • These studies, demonstrated that the PB-b-PEO block copolymers are a promising system models for developing a general route towards tunable crystalline morphologies. (uni-bayreuth.de)
  • In a symmetric PB-b-PEO block copolymer, crystalline morphologies like spheres and meanders formed upon quenching into liquid nitrogen and at 30°C, respectively. (uni-bayreuth.de)
  • The variety of phase compositions and structures needed in refractory production is hence greater than in metals and in some ways different in kind. (ispatguru.com)
  • The smooth surface is free of crystalline structures and makes the material resistant to salts or acids. (empa.ch)
  • The production of metallic glass is not entirely simple: Compared to window glass, the specially selected metal alloys must be cooled up to a hundred times faster so that the metal atoms do not form crystalline structures Only when the melt solidifies extremely quickly, it is able to form a glass. (empa.ch)
  • These diverse materials may exhibit time-dependent structures under transient or out-of-equilibrium conditions resulting from for example self-assembly processes, phase transitions or in response to external fields, such as flow. (lu.se)
  • The melting point (or, rarely, liquefaction point) of a substance is the temperature at which it changes state from solid to liquid. (wikipedia.org)
  • When considered as the temperature of the reverse change from liquid to solid, it is referred to as the freezing point or crystallization point. (wikipedia.org)
  • BVE displayed higher temperature thermal transitions than BIE (Tm = 48.8°C vs. 41.8°C), suggesting BVE molecules in the crystalline state are more closely packed than BIE molecules in the crystalline state. (inolex.com)
  • Phase behavior studies have shown that the size of the droplets is governed by the surfactant phase structure (bicontinuous micro emulsion or lamellar) at the inversion point induced by either temperature or composition. (rroij.com)
  • Refractories are mechanically strong and heat resistant to withstand rapid temperature change and corrosion and erosion by liquid metal, glass, slag, and hot gas. (ispatguru.com)
  • The temperature at which a substance transitions from a solid to a liquid state is known as its melting point (or, less frequently, liquefaction point). (javatpoint.com)
  • The term "freezing point" or "crystallization point" refers to the temperature at which a liquid returns to a solid. (javatpoint.com)
  • The homogenization temperature is 100-130 C of two-phase fluid inclusions. (stradanove.net)
  • 1 Temperature at which an exsolution pair of minerals, e.g. chalcopyritesphalerite, homogenize to a single crystalline phase. (stradanove.net)
  • However, in situ investigation of especially solvothermal synthesis is associated with significant experimental difficulties related to the severe synthesis conditions required (temperature up to 200 °С, pressure up to 20 bar, organic solvents, acidic or alkali media) and the complexity of the systems, which usually comprises various phases: true solutions, colloid solutions, precipitates, nanosized crystalline intermediates and the final product. (psi.ch)
  • The mesoporous mono-glycyl-ester phase is: lamellar mesophase, alpha gel cube hexagonal, monoglycerides under normal temperature condition beta crystal. (iberocruceros.com)
  • Water is the solvent of choice for liquid pharmaceutical formulations. (scialert.net)
  • BIE turned from an opaque solution to clear, suggesting a transition into an isotropic cubic phase, whereas BVE stayed stable in the lamellar phase. (inolex.com)
  • Nanoemulsion is kinetically stable and isotropic system of two immiscible liquids in sub microne size range. (rroij.com)
  • Refractories are inorganic, non-metallic, porous, and heterogeneous materials which are composed of thermally stable mineral aggregates, a binder phase, and additives. (ispatguru.com)
  • The monoglycerides distilled from the fatty acids crystallize to a metastable form of a- crystalline form, and then transform into a stable form of b- crystalline form with a greater melting point. (iberocruceros.com)
  • There are some applications where a metastable material is better, and others where the stable phases are better. (materialstoday.com)
  • The liquid crystalline phases formed with saturated monoglyceride are not stable, as the monoglyceride will crystallise over time and form dispersions of β-crystals in water. (ugurtimurcin.com)
  • 3. Crystallization: Monoglycerides, as a lipid composition, exhibit a homogeneous multicrystalline behavior. (iberocruceros.com)
  • Refractories perform four basic functions namely (i) act as a thermal barrier between a hot medium (e.g. flue gases, liquid metal, liquid slags, and molten salts) and the wall of the containing vessel, (ii) represent a chemical protective barrier against corrosion, (iii) ensure a strong physical protection, preventing the erosion of the walls by the circulating hot medium, and (iv) act as thermal insulation for ensuring heat retention. (ispatguru.com)
  • For a highly asymmetric PB-b-PEO block copolymer, crystallization at -30°C induced the formation of crystalline micelles retaining the spherical shape present in the molten state at 70°C. However, a quenching into liquid nitrogen facilitated a transition to rod-like micelles caused by changes of solvent quality for the PB coronar chains. (uni-bayreuth.de)
  • Ingots are manufactured by freezing a molten liquid (known as the melt) into a mold. (espimetals.com)
  • The cleansing compositions can comprise at least 8%, by weight of the composition, of fatty ester and/or further comprise a nonionic surfactant and less than about 50%, by weight of the composition, of an alcohol solvent such as ethanol, isopropanol, or mixtures thereof. (justia.com)
  • In one embodiment, the present compositions comprise a nonionic surfactant to allow the compositions to be easily rinsed or otherwise removed from the skin. (justia.com)
  • Cordobés F, Moros JE, Franco JM, Gallegos C. Linear viscoelasticity of liquid crystalline phases for a ethoxylated nonylphenol nonionic surfactant/water system. (csic.es)
  • They form liquid crystalline (LC) systems when combined with nonionic amphiphiles, such as fatty alcohols or glyceryl esters. (inolex.com)
  • The highly refractory composition of the SCLM is consistent with its formation by extensive (30-50%) melt extraction from fertile peridotite 1 during one or several melting events. (nature.com)
  • At the melting point the solid and liquid phase exist in equilibrium. (wikipedia.org)
  • Here, we report on an outstanding process that goes beyond the established schemes based on growth from liquids appearing in the equilibrium phase diagram. (nature.com)
  • It combines CSD using non-fluorinated precursors and a non-equilibrium process grounded on transient liquids, originating an ultrafast growth approach: Transient Liquid-Assisted Growth based on CSD (TLAG-CSD). (nature.com)
  • The kinetic hindrances in crystallization are advantageously used to induce transient liquids, i.e., liquids that do not exist in the equilibrium ternary phase diagram for such compositions. (nature.com)
  • In industrial monoglycerides, metastable b-crystalline forms are not present. (iberocruceros.com)
  • There's a great amount of possibility in the space of metastable materials, but when experimentalists go to the lab to make them, the process is very heuristic - it's trial and error,' said Berkeley Lab researcher Wenhao Sun. 'What we've done in this research is to understand the metastable phases that have been made, so that we can better understand which metastable phases can be made. (materialstoday.com)
  • Designing recipes is difficult because scientists have a poor understanding of why metastable phases appear during 'cooking. (materialstoday.com)
  • The present results provide insights into the structural and bonding factors favoring solidification to single-phase solid solutions in HEAs. (aip.org)
  • As may be deduced from the experimental results, dynamic measurements constitute an effective method to study the structural changes occurring in phase diagrams. (csic.es)
  • Their thermal maturing or sintering produces a wide variety of phase compositions and micro-structural features. (ispatguru.com)
  • Knowing the mechanism of the synthesis in turn enables tailoring the final properties of MOFs, such as structural and textural composition, crystallinity, nature and number of defects, acidity, and redox properties. (psi.ch)
  • On Earth , matter appears in three clearly defined forms - solid, liquid, and gas - whose varying structural characteristics are a function of the speeds at which its molecules move in relation to one another. (encyclopedia.com)
  • Structural characterizations and phase compositions of the samples were studied by XRD. (thinkzon.com)
  • Schematic picture of a hexagonal phase with anionic DNA and rodlike cationic CTA micelles which are distorted to reduce the electrostatic free energy. (lu.se)
  • Furthermore, intrinsic parameters of the nanoparticles such as their sizes, shapes and chemical compositions also have a direct incidence on their periodic arrangement: in the case of particles larger than 4 nm, compact hexagonal lattices are usually observed. (cea.fr)
  • Unlike in normal liquid chromatography where the liquid passes through the column under gravity, HPLC uses high pressure to pass the sample mixture through the column packed with a solid adsorbent material. (iti.lk)
  • Wiczling P., Kaliszan R,: pH Gradient as a tool for the separation of ionizable analytes in reversed-phase high-performance chromatography. (edu.pl)
  • Wiczling P., Kaliszan R,: Retention time and peak width in the combined pH/organic modifier gradient high performance liquid chromatography. (edu.pl)
  • Baczek T., Kaliszan R.: Predictions of peptides' retention times in reversed-phase liquid chromatography as a new supportive tool to improve protein identification in proteomics. (edu.pl)
  • Baczek T., Walijewski L., Kaliszan R.: pH gradient reversed-phase liquid chromatography as a fractionation tool for the separation of peptides. (edu.pl)
  • Wiczling P., Waszczuk-Jankowska M., Markuszewski M.J., Kaliszan R.: The application of gradient reversed-phase high-performance liquid chromatography to the pKa and log kw determination of polyprotic analytes. (edu.pl)
  • Michel M., Baczek T., Studzinska S., Bodzioch K., Jonsson T., Kaliszan R., Buszewski B.: Comparative evaluation of high-performance liquid chromatography stationary phases used for the separation of peptides in terms of quantitative structure-retention relationships. (edu.pl)
  • The present application relates to compositions comprising 4-chloroindole-3-acetic acid (4Cl-IAA) or an analogue thereof, or a combination of the latter, in the form of a potassium salt, a sodium salt or an amine salt. (justia.com)
  • The compositions are made by a process including dissolving the drug in a volatile organic solvent together with a hydrophilic polymer and evaporating the solvent to dryness to form a co-precipitate of the drug with the hydrophilic polymer. (allindianpatents.com)
  • relates to the formulation of solid dispersions comprising a hardly soluble drug substance together with a carrier (PVP), wherein the the drug substance is present in amorphous form or in crystalline form (Khougaz K et al. (allindianpatents.com)
  • When the a crystalline form is cooled a solid state transition occurs to a sub -a crystalline form. (iberocruceros.com)
  • Since, the melting point of the solid is related to solubility, the capacity for a substance to crystallize in more than one crystalline form is polymorphism. (scialert.net)
  • On the other hand, the lamellar phase shows a plateau region characteristic of highly structured systems. (csic.es)
  • These compositions tend to be highly aqueous and will comprise a level of alcohol solvent, such as ethanol, isopropanol, or mixtures thereof, of less than about 50%, by weight of the composition. (justia.com)
  • To further understand the science behind conditioning performance differences between BIE and BVE, characterization of lamellar LC formation was done at the bulk phase, with the amino lipids as aqueous solutions, and in a blend with fatty alcohols as a chassis formula. (inolex.com)
  • The recovery of ionic liquid was improved by employing a multiple step aqueous biphasic system in this study. (thinkzon.com)
  • Approximately 60% of the ionic liquid was recovered by 3-step aqueous biphasic system. (thinkzon.com)
  • This finding is on par with the reported literatures using aqueous biphasic system to recover ionic liquid. (thinkzon.com)
  • Results are compared with existing information for the liquids of metallic glasses, which also typically contain multiple principal elements, but retain the amorphous state under moderate to fast cooling rates. (aip.org)
  • A comparison of structure and composition between the supercooled liquid and potential crystalline phases demonstrates that the precipitation of the solid solution and compounds from the amorphous matrix for Al 90 Fe 10 alloy becomes much more difficult with the addition of Ce. (psu.edu)
  • A growth mode of the REO films was observed: layer-by-layer growth at the initial stage with an amorphous phase and subsequent crystalline island growth, accompanied by a change in the crystalline structure and orientation that affects the SFE. (asemlab.org)
  • The portion of the surface crystalline facets terminated with (222) and (440) planes evolved with an increase in ALD cycles and film thickness, as an amorphous phase was transformed. (asemlab.org)
  • Both the lower-melting inter-crystalline phases and the porosity influence the mechanical and thermal properties, and both have much to do with the penetration by corrosive media. (ispatguru.com)
  • crystalline cracks, liquefaction cracks and thermal cracks. (gdzhxc.com)
  • Needless to say, studying the crystallization processes is complex and requires physical chemical methods, which can monitor the evolution of the species in both liquid and solid phase. (psi.ch)
  • The central area of the weld is the last part of the liquid phase crystallization. (gdzhxc.com)
  • Moreover, an increased chain folding was observed at a high PEO composition which reduced the lamellar thickness of the crystals. (uni-bayreuth.de)
  • Soft matter is a convenient term encompassing a wide range of materials, such as polymers, surfactants, colloids, emulsions, liquid crystals and various biological materials. (lu.se)
  • Through surface tension the liquid forms spherical balls while in freefall and partially solidifies. (espimetals.com)
  • The compositions are prepared by dissolving the drug compound and the carrier (PVP) in a volatile solvent and then removing the solvent. (allindianpatents.com)
  • For example, such compositions can be used used in methods for selectively causing damage or mortality to weed. (justia.com)
  • Compositions can be chosen having selectively high chemical resistance (but rarely immunity) to oxidizing or reducing agents, acids or bases, metals or salts, whether liquid or gaseous. (ispatguru.com)
  • In this work the linear viscoelastic behaviour of micelar and liquid-crystalline phases in a polyoxy-ethylene glycol nonylphenyl ether (EO a =10)/water system was studied. (csic.es)
  • Molikova M., Markuszewski M.J., Kaliszan R., Jandera P.: Chromatographic behaviour of ionic liquid cations in view of quantitative structure-retention relationship. (edu.pl)
  • EP 0474 098 relates to the formulation of solid compositions comprising a hardly soluble drug substance co-precipitated with 3 carrfer comprising a water-soluble excipient (PVP) and a blodegradable excipient (polyactic acid). (allindianpatents.com)
  • The compositions are prepared by grinding/milling the drug substance and the cross-linked PVP without dissolving the active drug. (allindianpatents.com)
  • US 6 027 747 relates to the formulation of solid compositions comprising a hardly soluble drug substance together with a carrier (PVP). (allindianpatents.com)
  • These are merely physical changes, which do not affect the basic composition of the substance itself: it is still water. (encyclopedia.com)
  • The present invention relates to methods of cleansing skin and cleansing compositions comprising a fatty ester in combination with a lipid. (justia.com)
  • The present invention relates to compositions and methods for cleansing skin which also provide skin hydration benefits. (justia.com)
  • Watanabe T et al relates to the formulation of solid compositions comprising indomethacin and silica. (allindianpatents.com)
  • Poly-crystalline ceramics are characteristically brittle, and far less strong in tension than in compression. (ispatguru.com)
  • Regarding zirconia ceramics, which have a high crystalline content, 6 conventional procedures such as etching with hydrofluoric acid and application of a silane agent do not yield satisfactory outcome 6-7 . (bvsalud.org)
  • Dissolved carbohydrate obtained from 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) pretreated sago waste was saccharified by Amberlyst 15 (A15) to study the kinetics of the ionic liquid-mediated solid acid saccharification of the lignocellulosic biomass. (thinkzon.com)
  • Besides the kinetics of both reducing sugars production and reducing sugars degradation reactions, emphasis was given to the recovery and reusability of the ionic liquid and solid acid catalyst. (thinkzon.com)
  • Particles may also have aerodynamic diameters that differ from their geometric size, they may be highly non-spherical, and may be heterogeneous in composition and phase in internal and external mixtures. (aerosol-cdt.ac.uk)
  • As in other chromatographic techniques, separation of the sample into its constituents occurs according to their affinity to the mobile and stationary phase. (iti.lk)
  • 37.89 °F). However, certain substances possess differing solid-liquid transition temperatures. (wikipedia.org)
  • 1-5 The stability of these materials was initially understood to result from the configurational entropy contribution to the total free energy, which acts to stabilize the solid-solution state relative to multi-phase microstructures. (aip.org)
  • 6-10 A prime example is the five-element CrMnFeCoNi alloy (so-called Cantor HEA), which forms a single-phase fcc solid solution, and displays exceptional damage tolerance properties that are even further improved at cryogenic temperatures, contrary to behavior in most metallic materials. (aip.org)
  • Solid and liquid phases are equally present at the melting point. (javatpoint.com)
  • 37.89 °F). Yet, the temperatures at which some compounds change from solid to liquid vary. (javatpoint.com)
  • Fine-tuning of the surface free energy (SFE) of a solid material facilitates its use in a wide range of applications requiring precise control of the ubiquitous presence of liquid on the surface. (asemlab.org)
  • This study reports changes in solid phase composition when samples of Avicel cellulose (crystallinity: 60.5%) and ball-milled microcrystalline cellulose (crystallinity: 6.5%) were subjected to pyrolysis in a spoon reactor. (edu.au)
  • A new reaction mechanism to describe the changes in the solid residue composition at different reaction conditions is proposed. (edu.au)
  • For collecting NMR spectra, standard probes, which can accommodate 4 and 7 mm rotors spinning under magic angle for the detection of both liquid phase and solid species, are utilized. (psi.ch)
  • For example, we can now quantitatively characterize liquid-solid and gas-solid interfaces at nm-scale. (mrs.org)
  • It is a pure white waxy solid that melts into a transparent liquid. (iberocruceros.com)
  • The hydrophobic structuring agent can facilitate the formation of a gel network in the present compositions, which tends to provide a rich, creamy feel on the skin and allows for good application of the product without causing damage to the skin. (justia.com)
  • A basic oil bath with a clear window (the simplest design is a Thiele tube) and even a straightforward magnifier make up a melting point analysis tool for crystalline substances. (javatpoint.com)
  • Provided herein are compositions and methods comprising microbiome biomarkers of responsiveness/resistance to immunotherapy (e.g., anti-PD1/PD-L1 therapy), and diagnostic, prognostic and therapeutic uses thereof. (justia.com)
  • We believe that the results of this fundamental and practical study, with excellent selectivity to liquids, will have significant impacts on coating technology. (asemlab.org)
  • Methods of cleansing skin comprise the steps of contacting the skin with a cleansing compositions comprising a fatty ester in combination with a lipid, and either rinsing the composition from the skin with water or wiping the composition from the skin with a dry or damp substrate. (justia.com)
  • The methods and compositions provide skin cleansing and hydration benefits. (justia.com)
  • The methods of the present invention generally encompass contacting the skin with a composition of the present invention and either rinsing the composition from the skin with water or wiping the composition from the skin with a dry or damp substrate. (justia.com)
  • The disclosure provides methods and compositions that are useful to lessen and/or cure bacterial biofilms and treat diseases or disorders associated with biofilms using one or more novel polypeptide vaccines, antibodies, antibody fragments and compositions. (justia.com)
  • Methods and compositions are provided for treating neuropsychiatric disorders such as schizophrenia, depression, attention deficit disorder, mild cognitive impairment, dementia, and bipolar disorder. (justia.com)
  • Industrial refractories are almost all complex combinations of high-melting crystalline oxides, plus a few carbides, carbon, and graphite. (ispatguru.com)
  • LCMS-MS is usually a high-performance liquid chromatograph combined with two mass spectrometers. (iti.lk)
  • The transient liquid-assisted growth process is combined with chemical solution deposition, proposing a scalable method for superconducting tapes manufacturing. (nature.com)
  • Matter, however, can and does undergo chemical changes, which (as with the various states or phases of matter) are an outcome of activity at the atomic and molecular level. (encyclopedia.com)
  • With radiation of different wavelengths, we can learn about the structure of the crystalline portions, but also determine close-order phenomena of the atoms in the sample - in other words, determine the properties of the chemical bonds," Neels explains. (empa.ch)
  • Using ab initio molecular dynamics simulation, glass-forming abilities of Al 90 Fe 10 and Al 90 Fe 5 Ce 5 alloys have been investigated successfully correlated with the atomic structure and composition. (psu.edu)
  • The liquid reaction intermediate was found to cause particle agglomeration at temperatures below 300 °C. At higher temperatures, the ball-milled cellulose melted completely but the more crystalline cellulose conserved its fibrous structure. (edu.au)
  • In the process of rapid metallurgical solidification, Uneven composition distribution and hardened structure with low crack resistance will inevitably appear, which constitute metallurgical factors that promote crack initiation. (gdzhxc.com)
  • We probe the mechanical and fracture properties of hybrids in the extreme limits of molecular confinement, where a stiff inorganic matrix phase confines polymer chains to dimensions far smaller than their bulk radius of gyration. (mrs.org)
  • Babcock C, Friesen T et al (2009) Method and device for evaluation of pharmaceutical compositions. (springer.com)
  • The compositions generally comprise a fatty ester in combination with a lipid to provide both cleansing and hydration benefits in a rinse-off or wipe-off cleansing composition. (justia.com)
  • In one embodiment, the present compositions comprise at least 8%, by weight of the composition, of fatty ester to provide skin cleansing and hydration benefits, especially for removing greasy soils from skin (e.g. makeup) in the context of a rinse-off or wipe-off composition. (justia.com)
  • Fatty esters are incorporated in the present compositions to provide skin cleansing and skin hydration benefits. (justia.com)
  • a) Diacetyl tartaric acid esters of mono- and diglycerides, also know as DATEM, … Following is a table from the EFSA regarding the composition (% by weight) of monoglycerides, diglycerides, triglycerides and others in different food grades of mono and diglycerides of fatty acids in the market. (ugurtimurcin.com)
  • In one embodiment, the present compositions further comprise a hydrophobic structuring agent. (justia.com)
  • Petroleum and Heres how you know paleotemperatures by measuring liquid-vapour homogenization temperatures (Th) of fluid inclusions in stalagmites. (stradanove.net)
  • The resultant material can have both crystalline and fluid properties. (iberocruceros.com)
  • More than 90% of the garnet grains in the GAB are zoned toward Mn-rich rims, and a symmetrical change in garnet-core composition occurs across the body. (degruyter.com)
  • Based on this information, we demonstrated an SFE-tuned liquid tweezer with selectivity to target liquid droplets. (asemlab.org)
  • Perisic-Janjic N., RKaliszan R., Wiczling P., Milosevic N., Uscumlic G., Banjac N., Reversed-phase TLC and HPLC retention data in correlation studies with in silico molecular descriptors and druglikeness properties of newly synthesized anticonvulsant succinimide derivatives, Molecular Pharmaceutics, 8, 555-563 (2011). (edu.pl)
  • Phase diagrams of saturated monoglycerides (DIMODAN® HL) and unsaturated monoglycerides (DIMODAN® U) at varying temperatures. (ugurtimurcin.com)
  • There thus remains a desire to develop skin cleansing compositions, especially for facial cleansing, that provide effective skin cleansing while improving skin hydration, provide a rich creamy lather, and are easily rinsed from the skin with water or wiped from the skin with a dry or damp substrate. (justia.com)
  • Burrows R, Collett J et al (1994) The release of drugs from monoglyceride-water liquid crystalline phases. (springer.com)
  • This process can be operated as a closed loop, allowing the recovery and recycling of both water and EDTA, while eliminating the production of liquid waste. (rsc.org)
  • US 4 639 370 rotates to the formulation of powdery compositions comprising a poorly water-soluble drug in combination with a water Insoluble carrier (cross-linked PVP). (allindianpatents.com)
  • Depending on head group size and/or polarity, the LC phases formed will change and affect bulk properties and stability. (inolex.com)
  • yet, the properties of the liquid states of these materials, which are relevant to their processing, have been far less explored. (aip.org)
  • Some evidence suggests that the mechanical properties of the glasses do not deteriorate, but on the contrary actually improve, if the sample contains small crystalline fractions," says Neels. (empa.ch)
  • It is found that the enhanced glass-forming ability with the addition of Ce into Al 90 Fe 10 alloy, in contrast to the transitional metallic glass, has nothing to do with the kinetic factor and stability of local atomic packing, but the atomic environment and medium-range order in the supercooled liquid state. (psu.edu)