• In this review, we summarize existing SEM-based platforms for nanomaterial multiphysical (mechanical, electrical, and electromechanical) in situ characterization, outline critical experimental challenges for nanomaterial optical characterization in SEM, and discuss potential demands of the SEM-based platforms to characterizing multiphysical properties of the nanomaterials. (hindawi.com)
  • In the present work we reported the synthesis, characterization, and biological activity results of a copper mixed complex (see Figure 1 ), with hsm and nalidixic acid. (hindawi.com)
  • Gharamaleki, J. , Akbari, F. , Karbalaei, A. , Ghiassi, K. and Olmstead, M. (2016) Synthesis, Characterization and Crystal Structure of a New Schiff Base Ligand from a Bis(Thiazoline) Template and Hydrolytic Cleavage of the Imine Bond Induced by a Co(II) Cation. (scirp.org)
  • Here we describe the in depth characterization of a broad host range PB1-like phage with a slight prevalence to clinical isolates. (biomedcentral.com)
  • Isoenzyme characterization on these isolates using 11 enzyme systems was carried out and the results were compared with the enzyme profiles of the original isolates of L. major used for leishmanization. (who.int)
  • Among various experimental techniques employed for nanomaterial characterization, emerging technique of nanorobotic manipulation in scanning electron microscopy (SEM) has enabled various multiterminal characterization of nanomaterials and nanostructures, such as electrical and mechanical measurements [ 14 , 15 ]. (hindawi.com)
  • MEMS for in situ mechanical characterization refers to microelectromechanical systems (MEMS) used to measure the mechanical properties (such as the Young's modulus and fracture strength) of nanoscale specimens such as nanowires, nanorods, whiskers, nanotubes and thin films. (wikipedia.org)
  • Although TEM-based techniques are valuable for nanoscale characterization, conventional TEMs function only under high vacuum conditions. (nist.gov)
  • On one hand, nanomanipulation has filled the gap between top-down and bottom-up approaches and realized position control at the nanometer scale [ 16 ] and provides effective strategy for the property characterization of individual nanoscale materials and the construction of nanoscale devices [ 16 ]. (hindawi.com)
  • Benefiting from above merits, the combination of nanomanipulation technique and SEM has extended both our eyes and hands simultaneously to nanoscale providing an intuitionistic, real-time, and in situ way to study nanomaterials and perform nanomaterial characterization in SEM [ 15 ]. (hindawi.com)
  • This project will develop a sensitive and specific, cost-effective diagnostic tool for clinical RRD testing through a clinically validated lowpass genomic instability characterization diagnostic (LOGIC) assay. (genomecanada.ca)
  • Plan to attend this important webinar on longwall ventilation and how to improve conditions for miners, Sept. 21, 2017. (cdc.gov)
  • Makem, J 2005, ' Characterisation of mechanical properties of acrylic bone cement as a function of aging conditions and mixing environment ', Paper presented at 11th Bioengineering in Ireland Conference, Dublin, Ireland, 01/01/2005 - 01/01/2005 pp. 326-335. (qub.ac.uk)
  • This level of integration and miniaturization allows carrying out the mechanical characterization in situ, i.e., testing while observing the evolution of the sample in high magnification instruments such as optical microscopes, scanning electron microscopes (SEM), transmission electron microscopes (TEM) and X-ray setups. (wikipedia.org)
  • Typical macroscale mechanical characterization is mostly performed under uniaxial tensile conditions. (wikipedia.org)
  • Despite the existence of other methods of mechanical characterization such as three-point bending, hardness testing, etc., uniaxial tensile testing allows for the measurement of the most fundamental mechanical measurement of the specimen, namely its stress-strain curve. (wikipedia.org)
  • This review presents a survey of recent advances in in situ multiphysical characterization of nanomaterials in SEM, including mechanical, electrical, and electromechanical characterization. (hindawi.com)
  • Abstract The impact of antibiotics on growth , cocoon production was assessed in addition to isolation and characterization of bacteria associated with silkworm gut of infected larvae . (bvsalud.org)
  • Introduction to some basic methods used for powder characterisation, particle size measurement and a brief introduction to powder dispersion and suspension characterisation. (epfl.ch)
  • Current projects include the measurement of redox processes of ceria-based anode materials for solid oxide fuel cell applications, the effect of environmental conditions on local surface plasmon resonance in nano-sized metal particles, and the growth kinetics of carbon nanotubes. (nist.gov)
  • Sensing, Measurement & Characterization Lasers are advanced laser systems (typically CW) designed specifically for a range of applications in fields such as machine vision, particle measurement, gas sensing, Raman spectroscopy, and interferometry. (rpmclasers.com)
  • We recommend the following laser series options for Sensing, Measurement & Characterization applications. (rpmclasers.com)
  • Characterization of injury severity is crucial to the scientific study of trauma, yet the actual measurement of injury severity began only 50 years ago. (medscape.com)
  • Increasing taxonomic and functional characterization of host-microbiome interactions by DIA-PASEF metaproteomics' was published last week in Frontiers in Microbiology. (univie.ac.at)
  • The paper describes a new state-of-the-art methodology for the characterisation of host-microbiome interactions under pathophysiological conditions. (univie.ac.at)
  • In this sense, the physicochemical characterisation of different industrial (technical) lignins are performed exploiting different methods, like Brunauer-Emmett-Teller N2 adsorption, particle size distribution, Fourier transform infrared spectroscopy, ultraviolet-visible absorption spectroscopy, gel permeation chromatography, and thermogravimetric analysis. (lu.se)
  • For glycopeptide characterization, mass spectrometry has arisen as the go-to methodology. (news-medical.net)
  • 1242 , 2544 F. Calabria Category: Informational Cisco ISSN: 2070-1721 C. Olvera Consulintel March 2011 Device Reset Characterization Abstract An operational forwarding device may need to be restarted (automatically or manually) for a variety of reasons, an event called a "reset" in this document. (rfc-editor.org)
  • abstract = "The CHANCE project aims to address the specific issue of the characterization of conditioned radioactive waste (CRW). (sckcen.be)
  • The parents of an individual with an autosomal recessive condition each carry one copy of the mutated gene, but they usually do not show signs and symptoms of the condition. (medlineplus.gov)
  • In this study, laboratory precipitation experiments were conducted in controlled conditions to determine the conditions under which carbonates precipitate abiogenically. (confex.com)
  • The 8th International Conference on Computational Methods and Experiments in Materials Characterisation took place in Tallinn, Estonia. (wessex.ac.uk)
  • Phage infection experiments under simulated chronic lung infection conditions showed that alginate production reduces phage infection efficiency. (biomedcentral.com)
  • Moreover, we have unique and advanced laboratory facilities for investigating complex decomposition behaviors of biomass and waste feedstocks under different conditions, monitoring products compositions and evaluating reaction kinetic characteristics of the feedstocks. (sintef.no)
  • The conference continues to attract outstanding contributions in a variety of topics related to materials characterisation. (wessex.ac.uk)
  • A series of porous carbon materials obtained from biomass waste have been synthesized, with different morphologies and structural properties, and evaluated as potential adsorbents for CO 2 capture in post-combustion conditions. (frontiersin.org)
  • Next, it examines how we are gaining a more precise understanding of catalytic events and materials under working conditions. (researchandmarkets.com)
  • Heterogeneous Catalysts: Advanced Design, Characterization and Applications is an important book for catalytic chemists, materials scientists, surface chemists, physical chemists, inorganic chemists, chemical engineers, and other professionals working in the chemical industry. (researchandmarkets.com)
  • Radiation-induced degradation in nuclear structural materials, radiation-induced segregation, embrittlement, radiation-induced phase transformations, stress corrosion cracking, development of advanced reactor materials, advanced characterization techniques, small specimen testing, and development of novel testing methods. (ornl.gov)
  • These lasers play a crucial role in providing accurate, high-resolution measurements and detailed characterization of various materials and phenomena. (rpmclasers.com)
  • The sensitivity of the ellipsometry technique allows the characterization of materials with similar optical constants (around 0.1), such as those exhibited by the high and low deposition rate (HDR/LDR), and doped a-Si materials. (horiba.com)
  • The optical constants of silicon materials depend strongly on process conditions. (horiba.com)
  • It offers a detailed approach to the chemical characterization of medical device materials within a risk management process. (en-standard.eu)
  • It provides a systematic approach to the chemical characterization of medical device materials, ensuring that these devices are safe and effective for use. (en-standard.eu)
  • This condition is on a P-V curve where the characteristic depends on temperature of PV surface and irradiation level. (unair.ac.id)
  • Tunable diode laser spectroscopy (TDLS) can measure the concentration, temperature, and pressure of various gases in-situ under harsh conditions with good time resolution, sensitivity, and selectivity. (rpmclasers.com)
  • The non-destructive characterizations of a-Si and Low Temperature Poly Silicon TFT-LCD panels were successfully carried out by spectroscopic ellipsometry. (horiba.com)
  • Larval rearing was maintained at recommended conditions of temperature and humidity . (bvsalud.org)
  • biomaterials including relevant characterisation methods, surface treatment, experimentation and modelling as well as tissue engineering. (wessex.ac.uk)
  • Over the ensuing decades, the etiology of the condition was elucidated and a diagnostic test was developed. (medscape.com)
  • Challenges and limitations of the optical characterization in SEM are analyzed, and prospects for multiphysical nanomaterial characterization are also discussed. (hindawi.com)
  • The prediction, identification, and characterization of phases away from equilibrium conditions remain difficult challenges for material science. (lu.se)
  • The second objective of CHANCE is to further develop, test and validate techniques already identified that will undoubtedly improve the characterization of CRW. (sckcen.be)
  • Product separation and upgrading tasks are also conducted and evaluated using different characterisation techniques, such as SEC, NMR, and SFC-MS. (lu.se)
  • Fuel characterization is the primary and a critical step in the evaluation of biomass and waste feedstocks' suitability for a thermal conversion process. (sintef.no)
  • Detailed and accurate characterization is especially important for proper utilization of inhomogeneous and low quality biomass and waste feedstocks, to prevent operational related problems, optimize conversion processes and design conversion systems. (sintef.no)
  • SINTEF carries out full characterization of biomass and waste feedstocks in terms of physical, chemical, elemental, calorific and ash related properties according to different international and national standards. (sintef.no)
  • SINTEF offers unique and advanced laboratory facilities for characterization and evaluation of thermal behaviors of biomass and waste feedstocks. (sintef.no)
  • Technically speaking, the lignin surface properties are affected by the biomass substrate source and the pretreatment process conditions. (lu.se)
  • Until recently, classification of N-glycopeptide spectra in ProteinScape (detection of glycopeptide spectra and calculation of glycan and peptide moiety mass) has centered on glycan fragment distances and oxonium ion detection when using typical CID conditions on ion trap or qTof instruments (see application note LCMS-66)4. (news-medical.net)
  • Is it normally a symptom of an underlying disease or should it be considered a multifactorial geriatric condition? (medscape.com)
  • Therefore, appropriate adsorbents must present sufficient adsorption capacity, high CO 2 selectivity, adequate density and hardness, low abrasion index, and good stability in moisture conditions. (frontiersin.org)
  • The molecular approach of using Geneious Prime software and protein prediction data base for characterization of bacteriocin is novel and predicts " KSSAYSLQMGATAIKQVKKLFKKWGW " as peptide responsible for antimicrobial activity. (researchsquare.com)
  • The sticks from the test sample went through a physical characterization process, based on 10 observations (1 observation per stick) in which the measurements were recorded to the nearest 0.5mm. (who.int)
  • Process conditions are screened to find optimal conditions for production of low-molecular weight aromatics for further microbial conversion. (lu.se)
  • This paper introduces operators, semantics, characterizations, and solution-independent conditions to guarantee temporal logic specifications for hybrid dynamical systems. (escholarship.org)
  • Characterizations of temporal logic formulas in terms of dynamical properties of hybrid systems are presented - in particular, forward invariance and finite time attractivity. (escholarship.org)
  • These characterizations are exploited to formulate sufficient conditions assuring the satisfaction of temporal logic formulas - when possible, these conditions do not involve solution information. (escholarship.org)
  • Temporal flucuations, both daily to montly, have been associated with these weather conditions. (bl.uk)
  • Introducing the BS EN ISO 10993-18:2020+A1:2023 , a comprehensive standard that provides an in-depth guide to the biological evaluation of medical devices. (en-standard.eu)
  • The BS EN ISO 10993-18:2020+A1:2023 standard is known for its comprehensive coverage of the biological evaluation of medical devices. (en-standard.eu)
  • Choosing the BS EN ISO 10993-18:2020+A1:2023 standard means choosing a tool that is recognized and respected in the medical field. (en-standard.eu)
  • Getting your copy of the BS EN ISO 10993-18:2020+A1:2023 standard is easy. (en-standard.eu)
  • Invest in the BS EN ISO 10993-18:2020+A1:2023 standard today and equip yourself with a powerful tool that can help you ensure the safety and effectiveness of medical devices. (en-standard.eu)
  • C and Pb isotopes have been found to have potential for the identification and characterisation of aerosol sources. (bl.uk)
  • The tests are performed using a tailored continuous flow reactor (CFR) system and new regimes/conditions for such reaction are investigated. (lu.se)
  • The primary objective of this study is to characterize water-quality conditions and bed-sediment chemistry in the vicinity of the planned Mid-Currituck Bridge, providing a baseline for evaluating the potential effects of bridge construction and bridge deck runoff on environmental conditions in Currituck Sound. (usgs.gov)
  • This implies conditions that can enable lateral meltwater runoff and potentially contribute to the total surface runoff routed through supraglacial rivers down glacier. (copernicus.org)
  • Seasonal changes in water quality best explained the variations in water-quality conditions in Currituck Sound during the study. (usgs.gov)
  • In this paper, based on a partial order, we study the characterizations of directional derivatives and the subdifferential of fuzzy function. (mdpi.com)
  • We used an artificial sputum medium to study phage infection under conditions similar to a chronic lung infection. (biomedcentral.com)
  • On the field of photovoltaic powered system study, there is maximum power point tracking (MPPT) keeps the energy transfer on its peak condition. (unair.ac.id)
  • The WHO Study Group on Tobacco Product Regulation recommended that research be conducted to determine whether and in what conditions smokeless tobacco might be used as an aid under quitting smoking and whether marketing smokeless tobacco as a method for harm reduction would encourage taking up of smoking or smokeless tobacco use. (who.int)
  • Spectroscopic ellipsometry is an excellent technique for the highly accurate characterization of TFT-LCD display panels based on a-Si and TPS technologies. (horiba.com)
  • Spectroscopic ellipsometry is an excellent technique for the highly accurate characterization of TFT-LCD display panels based on a-Si and LTPS technologies. (horiba.com)
  • Here, we present an initial characterization of scanner performance during patient imaging. (snmjournals.org)
  • 386-16) into the levels of menthol present in the original report, test samples we re-tested, this time from pack- conditioned cigarette packs, and the newly generated data is included in this revision. (who.int)
  • The first objective of CHANCE is to establish, at the European level, a comprehensive understanding of current CRW characterization and quality control schemes. (sckcen.be)
  • The BBB allows for the controlled transport of necessary peptides and proteins to maintain proper neuronal function, even under pathological conditions. (nature.com)
  • Home care presents complexities due to chronic conditions and the use of technological devices. (bvs.br)
  • In Brazil, children with special health care needs (CSHCN) are understood as the group of children who have one or more chronic health conditions, demanding continuous, temporary and, sometimes, permanent care, requiring a greater number of health visits than a healthy child. (bvs.br)
  • few work has been reported for optical characterization of nanomaterials. (hindawi.com)
  • The orientation of the short fibers depends strongly on the processing conditions. (nist.gov)
  • Characterization of such complex, time-dependent transformations requires the use of advanced methodologies that enable the underlying chemical and physical processes to be identified and understood. (nist.gov)
  • Moreover, phages which multiply well under in vitro conditions can fail to replicate during treatment in vivo [ 19 ]. (biomedcentral.com)
  • Several hypothesis exist explaining the observed high antibiotic tolerance of P. aeruginosa in the CF-lung, which is caused by special growth conditions. (biomedcentral.com)