Ceramic additive aluminum. Medical search. Frequent questions

Before doing this, the molten aluminum must be thickened, which is accomplished by adding silicon carbide or aluminum oxide fibers. (blogarama.com)
It is a reactive metal that is challenging to separate from aluminum oxide, its source (Al2O3). (blogarama.com)
Corundum, a fine crystal form of aluminum oxide, makes several gemstones. (blogarama.com)
Existing solutions such as directly bonded copper-aluminum oxide (DBC, direct bonded copper) or active metal-brazed copper-aluminum nitride substrates (AMB, active metal brazing) cannot meet the future requirements of electromobility and realize the full potential of new silicon carbide (SiC)-based semiconductor components. (fraunhofer.de)
For softer materials like wood and rubber, pure water suffices, while tougher materials require an abrasive additive, such as garnet or aluminum oxide, to enhance cutting power. (cncmasters.com)
②Titanium diboride can be composited with silicon carbide, aluminum nitride, boron nitride, titanium carbide and other non-oxide ceramics, or it can be composited with alumina and other oxide ceramic materials. (mis-asia.com)
98% Fumed Alumina Fumed Alkyl Oxide Alumina (aluminium dioxide) is an inorganic compound with the chemical formula Al2O3. (mis-asia.com)
The stable aluminum oxide, Alumina. (mis-asia.com)
Comparing with brown fused alumina, white aluminum oxide is also characterized by its high purity, acid and alkali resistance, good thermal stability. (corundumaluminumoxide.com)
White fused aluminum oxide becomes the first choice for the sandblasting , meanwhile, it is also the ideal material for abrasive and work piece cleaning, and polishing. (corundumaluminumoxide.com)
White fused aluminum oxide can be used for shell making material of heavy steel casting, especially the alloy casting, core sand, coating material and melt film precision casting.And white alumina is also can be used as half precision blasting and precision blasting material for hardened steel, alloy steel and so on. (corundumaluminumoxide.com)
The powders used are aluminum oxide ceramics containing additives of chromium oxide, titanium oxide and magnesium oxide. (asminternational.org)
A metal chromium oxide has less oxidation state than the aluminum oxide. (mysukishop.com)
The main raw material of wear resistant ceramic ring is a special kind of ceramic with AL2O3 as the and the rare metal oxide as the flux, which is melted by high temperature at 1700 °C. The Ceramic Sleeves Lined Pipe as a whole part, and then assemble it into the steel pipe with our high-strength-temperature-resistant epoxy adhesive. (sunnysteel.com)
The wear resistant ceramic ring is a special kind of ceramic with Al2O3 as the main raw material and the rare metal oxide as the flux, which is melted by high temperature at 1700 oC. (sunnysteel.com)
Alumina (aluminum oxide) was chosen for development because of its wide use as a technical ceramic and the evident market demand to see parts produced with the benefits of XJet NanoParticle Jetting ™ (NPJ) production. (incus-media.com)
Bearings made of ceramics (eg, alumina [aluminum oxide] and zirconia [zirconium oxide]) have been shown to possess extremely low wear properties that make them suitable for both THA and TKA. (medscape.com)

Furthermore, a combination of natural raw material (zircon) with alumina was used to investigate the in-situ formation of mullite-zirconia composites in 3D printed parts. (usp.br)
Thus, photosensitive ceramic suspensions based on a nanometric zirconia powder (3Y-TZP) were developed and characterized, selecting the appropriate components (monomer, photoinitiator, and dispersant). (usp.br)
Furthermore, the formulation based on the mixture of ceramic powders (zircon and alumina) showed that the technique can be combined with reactive sintering to create in-situ mullite and zirconia composites. (usp.br)
Three different ceramic oxides (alumina, zirconia and fused silica) having similar particle size distributions were used. (ua.pt)
Previous studies found yttria-stabilized zirconia coatings doped with alumina and titania demonstrated improved corrosion resistance against this molten glass. (ceramics.org)
As alumina is the most widely used technical ceramic, and the most cost-effective, it made perfect sense to introduce that as our second ceramic material after zirconia," states Dror Danai, CBO, XJet. (incus-media.com)
Both alumina and zirconia are technical ceramics with very good resistance to chemicals (non-corrosive), are great insulators and are very hard materials. (incus-media.com)

Alumina Al2O3 is an organic compound with the chemical composition Al2O3. (mis-asia.com)
Al2O3 is available in many crys What activates alumina? (mis-asia.com)
Spherical Al2O3 Property Because of their many crystal shapes Alumina powder can be used in a variety of applications. (mis-asia.com)
Hence, this research was pursued to fabricate the cordierite in a cost effective manner using fly ash containing the major constituent{\textquoteright}s silica (SiO2) and alumina (Al2O3). (uai.cl)
White fused alumina is the high grade refractory raw material, main crystal systemis a-Al2O3, white colour. (corundumaluminumoxide.com)
Key result of this study is that both, pure alumina (Al2O3) and one class of spinel (Al2O3 - 28MgO) meet the requirements for electrical insulation. (asminternational.org)

Experimental fracture mechanics, relation between microstructure and fracture behaviour in advanced materials mainly in ceramics, and ceramics based composites. (ipm.cz)
One solution might be composites with silicon nitride (Si 3 N 4 ) ceramics with their superior mechanical properties. (fraunhofer.de)
GE used more temperature-resistant ceramic matrix composites developed for its commercial engines and added a cool third stream that acts as a heat sink inside the engine. (aviationtoday.com)
This report covers the current status of the additive manufacturing materials market from the perspective of polymers, fiber reinforced composites, metals, ceramics, and construction, with detail about material uptake trends occurring in the industry. (idtechex.com)
Ceramic technology continues to evolve, and new materials based on nonoxide ceramics, composites of existing ceramics, and surface modifications will offer more options to the arthroplasty surgeon. (medscape.com)

The ceramic powders were selected to evaluate the process using distinct groups of advanced ceramics: nanometric powders (3Y-TZP) and submicrometric powders (electrofused mullite). (usp.br)
Alumina powders with ultrafine or fine grain have a different surface electronic structure, and crystal structure, which results in surface effects, and smaller sizes, that cannot be found in macroscopic items. (actionext.com)
The basis for this is particularly low-oxygen content Si 3 N 4 powders in combination with aluminum-free additives. (fraunhofer.de)
By using a binder matrix in which fine ceramic powder and metal are dispersed, we've ensured a secure production process, eliminating the hazards often associated with powders, lasers, and other risks. (additiveplus.com)
Alumina powders with ultrafine or fine grain have a different surface electronic structure, and the crystal structure has also changed. (mis-asia.com)
The influence of binder burnout atmosphere (air or N-2) on surface chemistry of thermo-chemically treated AlN powders processed in aqueous media, and on the final properties of AlN ceramics was studied. (ua.pt)
This report takes an in-depth look into the established material classes of polymer, metal, and ceramic materials, including photopolymer resins, thermoplastic powders, thermoplastic filaments, metal powders, and ceramic materials. (idtechex.com)

Additive manufacturing (AM) or 3D printing is a set of technologies that fabricate parts by successively adding layers. (usp.br)
In ceramic manufacturing, AM allows the fabrication of small series components with greater geometric freedom, lower cost, and reduced delivery time. (usp.br)
In this way, a ceramic slurry was obtained capable of validating the developed prototype and manufacturing green ceramic bodies. (usp.br)
Both 3D printers tested proved capable of creating dense ceramic pieces (>95%) and with geometries that would be unfeasible or even impossible by other manufacturing methods. (usp.br)
Finally, it is believed that the present study contributes to the knowledge related to the additive manufacturing of ceramics and stands out for presenting an approach accessible to laboratories and small manufacturers of ceramic products. (usp.br)
Over 150 specialist suppliers to the medical device andceramic machined parts, ceramic accessories,unique mechanical, ceramic thermal，biochemical properties，property combinations,cerami materials manufacturing for medical technical applications. (engineeringceramicltd.com)
T he convergence of dramatic improvements in the fields of robotics, artificial intelligence, materials, additive manufacturing, and nanoenergetics is dramatically changing the character of conflict in all domains. (intelros.ru)
Direct coagulation printing (DCP) is a new approach to extrusion-based additive manufacturing, developed during this thesis project using alumina nanopowder. (mountainscholar.org)
With the use of additive manufacturing, complex features can be generated that are either very difficult or unattainable by conventional subtractive manufacturing methods. (mountainscholar.org)
Perhaps most importantly, any material that acquires a surface charge when in aqueous media has the potential to be used in DCP, making it a method of additive manufacturing using many metals and ceramics other than alumina. (mountainscholar.org)
With the M.A.T., the manufacturing of technical ceramic and metal parts becomes a straightforward task. (additiveplus.com)
Materials present the strongest revenue opportunity within additive manufacturing, but understanding the variety of polymer, metal, and ceramic materials within 3D printing is critical to capitalizing on this opportunity. (idtechex.com)
This report examines the status of established 3D printing materials, presents technical comparison studies, analyzes trends, and provides detailed market forecasts for additive manufacturing materials. (idtechex.com)
Importantly, this wider materials portfolio comes alongside increased adoption of additive manufacturing, as important end-users begin to fully understand the value-add that 3D printing brings to their supply chain. (idtechex.com)
Rehovot, Israel - August 19 , 2021 - XJet Ltd. announces today the commercial availability of alumina, adding to its portfolio of additive manufacturing materials. (incus-media.com)
Now with XJet additive manufacturing (AM) systems, this limitation is lifted and manufacturers can capitalize on the benefits of additive manufacturing, creating parts with complex geometries and internal cavities that were not previously possible with traditional ceramic manufacturing technologies. (incus-media.com)
The popular technical ceramic, alumina, is now available for additive manufacturing on XJet AM systems. (incus-media.com)

A manufacturer of high purity alumina, white fused alumina and other nanopowders to serve demanding technologies in ceramics, polishing and additives applications. (nanowerk.com)
Fumed Alumina is simila Coating material for lithium-ion battery diaphragms : high-purity nano-alumina The ceramic coating is applied to the negative and positive electrode separators of the lithium batteries. (mis-asia.com)
Material additive for the lithium battery cathode Doping lithium cobaltate and lithium manganate with high-purity nanoalumina It can increase thermal stability, cycle performance and resistance to overcharge, inhibit One of the thermal conductive material is aluminum. (mis-asia.com)
High Purity Alumina (99.8%) (HP-A 99.8) is an alumina-filled photo resin that sinters to a final part purity of 99.8% alumina with only 12% shrinkage. (3dfortify.com)

Epoxy Gel Casting (EGC) was recently coined to designate a setting mechanism based on the in situ polymerization of epoxy resins dissolved in the aqueous dispersion media of ceramic powder suspensions upon adding suitable amine-based crosslinking agents. (ua.pt)
The specific interactions between the surface of the powder particles and the processing additives are likely to determine different partitions of the crosslinking species, dissolved in the bulk solution, or adsorbed at the surface of the particles, and affect the EGC process. (ua.pt)
In conventional ceramics the addition of ultrafine powder alumina can increase the toughness and reduce the sintering temp. (actionext.com)
The ultra-fine alumina powder can also be added to dispersion as a strengthening agent and additive. (actionext.com)
Ultra-fine powder alumina is sensitive to external moisture because of its large surface area. (actionext.com)
This is because ultrafine powder alumina has an array of superior electrical, optical, magnetic, mechanical, and chemical macroscopic characteristics compared to traditional particles. (actionext.com)
The sphere activated alumina pressure-swing oil adsorbent contains white, spheri Fumed Alumina can be used in flow aids, as anti-adhesion for PET film, fluorescent tube, and lightbulb and also as an environmental-friendly powder coating to protect and bond. (mis-asia.com)
For more information, read about Microfine Alumina Powder. (mis-asia.com)
This mineral is a common component of cement, mortar, a Ultra-fine alumina powder is an indispensable important material in modern industry. (mis-asia.com)
After ultra-fine micronization of alumina powder, its surface electronic structure and crystal structure have changed, resulting in surface effects and sma 1. (mis-asia.com)
Sintering characteristics of activated alumina powder The sintering process refers to the transfer of substances between the particles when the surface tension is not neglected. (mis-asia.com)
Iberocruceros can be trusted worldwide MAX Special Ceramics Material Vanadium Aluminum Carbide V4AlC3 Powder supplier. (actionext.com)
Vanadium aluminum carbonide V4AlC3 is a powder with high strength and elastic modulus. (actionext.com)
We offer many packing options that are dependent on the amount of vanadium aluminum caride V4AlC3 in powder. (actionext.com)
Shipping Vanadium aluminum caride V4AlC3 Powder After receipt of payment, items may be sent out either by air or sea. (actionext.com)

Taguchi and fractional factorial design of experiments models were used to optimize mixing of the alumina slurry, rheological properties, print quality, and sinterability. (mountainscholar.org)
Additionally, Robocasting allows the extrusion of ceramic slurry through a nozzle. (additiveplus.com)
The alumina ceramic lined tube/elbow is one piece, the slurry couldn't permeate through it, moreover, the alumina tube/elbow has high hardness and the process by isostatic pressing dry power is favorable to the uniformity of ceramic crystal structure, so its wear resistance is better than ceramic tiles with the same materials. (sunnysteel.com)

A new transparent ultra-thin material consisting ultra-fine particles of alumina coated on metals or ceramics can be used to improve surface hardness and corrosion resistance. (actionext.com)
After sintering, these parts exhibited little to no porosity, with flexural modulus and hardness comparing favorably with conventionally manufactured alumina parts. (mountainscholar.org)
The cordierite-ZrO 2 ceramics (CZr20) exhibited a Vickers hardness value of 7.04 GPa, the fracture toughness of 3.47 MPa m ½ , and flexural strength of 196.72 MPa. (uai.cl)
It has higher hardness and slight lower toughness comparing with brown fused alumina. (corundumaluminumoxide.com)
Offering extremely high mechanical strength, high hardness as well as very good electrical insulation, alumina also has high wear resistance, high thermal conductivity and resistance to high temperatures. (incus-media.com)

In addition, photosensitive suspensions were developed seeking to meet process requirements related to high ceramic loading, rheological behavior, photosensitive parameters, and stability. (usp.br)

M.A.T. uses a high-performance extrusion system specifically designed for metals and ceramics, as well as two additional processes - CNC machining and Robocasting - to create complex geometries in materials such as Stainless Steel, Titanium, Alumina, Silicon Carbide, and More. (additiveplus.com)

③Titanium diboride particles mixed with high-performance resin can be made into PTC heating ceramics and head-type PTC materials, which have the characteristics of safety, power saving, reliability, and easy processing and molding. (mis-asia.com)

Recently 95% alumina ceramic sleeve lined pipes, elbows and T pipes have been largely applied in lithium battery material conveying system. (sunnysteel.com)

Manganese is used in many steel alloys and aluminum alloys to improve strength, malleability and corrosion resistance. (espimetals.com)
Manganese compounds are used as gasoline additives, as a reagent in organic chemistry, and in batteries. (espimetals.com)
Manganese dioxide has been used in the manufacture of glass to remove color caused by iron impurities and as a pigment in glass, ceramics and paint. (espimetals.com)
Impact of a ceramic trap and manganese fuel additive on the biological activity and chemical composition of exhaust particles from diesel engines used in underground mines. (cdc.gov)

Humphry Davy gave the element its initial name, aluminum, although it soon acquired the more widely used term in Europe, thanks to others. (blogarama.com)
Spherical Alumina is widely used not only as a thermal conductive substance but also in advanced ceramics, catalysis and grinding, polishing and composite materials. (mis-asia.com)
Cordierite ceramics are widely used in the production of microelectronic components, catalyst substrate material for internal combustion engine. (uai.cl)

We are manufacturers and exporter''s of Stainless Steel Aluminum Utensils and Kitchenware items since 1985. (denhoutsportief.be)
Made of high-quality aluminum with Ceravegan non-stick coating, stainless steel base and wood-look handles. (just-vegan.de)

The HDS of ultrafine alumina particles loaded Co-Mo is higher than the HDS of common alumina-loaded CoMo. (actionext.com)
In the sintering stage, the printed parts undergo a controlled heat treatment process, fusing the metal or ceramic particles together to achieve exceptional strength, durability, and mechanical properties, to ensure high-quality, fully functional parts that meet the most demanding requirements. (additiveplus.com)

This system aims to overcome the challenge of creating layers for ceramic suspensions, which usually have high viscosity. (usp.br)

Iron traces give topaz, an aluminum silicate, a golden color. (blogarama.com)
Kaolin, a fine white clay, is produced by the natural chemical weathering of aluminum silicate minerals such as feldspar. (athearn.com)
Low Shrink Aluminum Silicate (LS-AS ) is a mid-grade ceramic for general industry use. (3dfortify.com)

For an electrically insulating ceramic, it is 70-210 W/(m·K) for polycrystalline material, and as high as 285 W/(m·K) for single crystals). (wikipedia.org)
Ball clay is particularly valued as a base material in the manufacture of ceramics. (imerys.com)
However, there is a shortage of VP commercial equipment dedicated to producing ceramics at an affordable price, given the challenges of dealing with raw material with high particle loading. (usp.br)
The use of ultrafine alumina can be used to synthesize aluminum alloy ultrafine composite materials and a new type composite ceramic material. (actionext.com)
The ultra-fine alumina substrate is also a common material. (actionext.com)
Based on the findings obtained within the framework of CuSiN, the field of offered services includes the development of Si 3 N 4 -ceramics, active filler metal pastes and active metal brazing processes as well as material specific and electrical characterization of copper-ceramic substrates. (fraunhofer.de)
As a new type of ceramic material, it has excellent physical and chemical properties. (mis-asia.com)
It can be mixed into aluminum-based, copper-based titanium-aluminum alloy and iron-based materials to greatly improve the mechanical and physical properties of the material. (mis-asia.com)
White fused alumina electrically fused in arc furnace with high grade processed alumina as raw material. (corundumaluminumoxide.com)
1, High grade processed alumina as raw material. (corundumaluminumoxide.com)
These forecast lines span polymer, metal, ceramic, and construction materials, with insight offered on mass demand and revenue generation over the coming decade for different material categories. (idtechex.com)
We are pleased to bring this extremely useful and valuable technical ceramic material to market, adding to our dynamic AM portfolio," continues Danai. (incus-media.com)
Designers and manufacturers can see samples of parts made with XJet's alumina material at several upcoming ceramics and AM shows: Ceramics Expo (Cleveland August 31st to September 1st), Rapid +TCT (Chicago, September 13th to 15th) and Formnext (Frankfurt, November 16th to 19th). (incus-media.com)
[ 3 , 4 ] Ceramics will continue to be developed for clinical use as the underlying engineering and material science principles of new materials are validated and as clinical data demonstrate their safety and reliability in vivo. (medscape.com)

Aluminum, primarily present in the form of insoluble aluminum hydroxide, significantly contributes to soil characteristics. (blogarama.com)
Alumina is an insoluble white solid that absorbs moisture but does not dissolve. (mis-asia.com)

It is notable for its oxidation resistance (although aluminum is virtually always already oxidized), strength, and lightweight, unlike other metals. (blogarama.com)
Functionalization will involve a range of approaches, including wash coating with oxidation catalysts (as in car exhausts) and also examination of the potential for involvement of cermets and of ionically conductive ceramics (both stable at high temperatures). (ukri.org)
The advanced structures achieved by Smart Separations Ltd, the lead partner in this bid, offer the potential to optimise (jointly with the academic partner) ceramic membrane pore structures for this application (with close control of pore size and hence selectivity in e.g. removing particulates above chosen diameters, and potential for membrane functionalization in terms of oxidation catalysis and of conductivity). (ukri.org)

This enables metallized ceramic substrates to be used in power electronic assemblies with significantly improved stability against the active and passive thermal cycles. (fraunhofer.de)
Beyond the primary goal of maximizing both range and thrust, the XA100 allows for improved thermal management, which is becoming more important as more powerful aircraft systems generate more and more heat and exteriors are switched from aluminum to composite skins, which Tweedie said act like a Thermos. (aviationtoday.com)

Nanoscale Alumina absorbs ultra violet light. (actionext.com)

The wear-resistant ceramic ring has the characteristics of smooth interior wall and super wear resistance. (sunnysteel.com)
The superior wear characteristics of ceramic materials have been verified in many clinical and experimental studies. (medscape.com)

In this work, which approaches the fabrication of advanced ceramics by digital light processing VP, the feasibility of using a top- down 3D printer prototype and an ordinary commercial bottom-up printer (usually applied in polymer 3D printing) in the processing of ceramic materials was tested. (usp.br)
The fabrication of complex ceramic parts, sintered to full density, was achieved and the details of this invention are described. (mountainscholar.org)

This is because pure aluminum may easily create alloys with numerous other elements, including copper, zinc, and magnesium. (blogarama.com)

When compared to the most commonly used bearing couple in joint arthroplasty, which consists of cobalt-chrome (CoCr) metal alloy articulating against UHMWPE (see the image below), ceramic surfaces offer significant reductions in bearing wear rates. (medscape.com)

Mined in the southeast United States (primarily Georgia and Florida), kaolin is used in the manufacture of ceramics, bricks, light bulbs, cosmetics, medicines and food additives. (athearn.com)

Titanium diboride and its composite materials can be combined with other metals and ceramic-based polymers to form a series of new materials with commercial application value. (mis-asia.com)
Because they are made from molecular sheet of carbides and trides, such as those found in titanium and MAX Special Ceramics Materials Vanadium Aluminum Carbonbide, these sheets have excellent conductivity. (actionext.com)

Talk to our ceramics experts today about your processes and the attributes you want to boost in your insulators, and they'll find the right solution for you. (imerys.com)
Polymer, metal, wax, sand, concrete - as the 3D printing technology landscape has grown in diversity and complexity, so has the variety of materials compatible with these many additive processes. (idtechex.com)

With the isoelectric point of the naked particle surface decreasing, there were noticeable decreases in gelation time, shrinkage, green density, and flexural strength of the green ceramic body's properties. (ua.pt)

The high temperature environment has led to development of ceramic filters for this application but previously reported systems suffer from a non-selective (imperfect) filter bag approach, often in up to 3 stages. (ukri.org)
It is possible to obtain low temperature plastic ceramics due to the superplasticity and the low temperature plastics. (actionext.com)
The latest aluminum thermocouple head is a high-precision temperature sensor used to measure temperature changes in high-temperature environments. (engineeringceramicltd.com)

Right now, our factory have owned both advantages which are wear resistant ceramic pressing facilities and technologies. (sunnysteel.com)

Alumina ultra-fine has a good pore-size distribution, a high pore-volume, atomic-coordination on the surface (surface area up to 60-400m2/g), and a smooth surface with reducing particle size. (actionext.com)
①Titanium diboride can be used as a grain refinement and particle strengthening additive. (mis-asia.com)

The search for the ideal total joint bearing has led to the development of ceramic bearings. (medscape.com)

This proprietary filtration platform technology is based on a novel formation of conical pores within ceramic filters and which can be tailored to suit a wide range of different markets and industrial applications. (ukri.org)
Its properties and applications can be influenced by the type of alumina used. (mis-asia.com)
Fortify's DLP-powered 3D printer and resins are ideal for technical ceramics applications. (3dfortify.com)

A tiny layer of aluminum reflective coating is applied to the back of a float glass sheet to create almost all contemporary mirrors. (blogarama.com)
Also covered in a fragile coating of aluminum are telescope mirrors. (blogarama.com)
JUSTVEGAN - pans with innovative, plant-based Ceravegan ceramic non-stick coating based on avocado oil and water. (just-vegan.de)

Our kaolin is selected for its high alumina content and low pyro plastic deformation. (imerys.com)

Engineering Ceramic Co report：Ceramicsilicon carbide additivemanufacturing is no longer a prototyping technology. (engineeringceramicltd.com)
Prices starting at Vanadium Aluminum Carbide Anytime. (actionext.com)

The most recent advancement in aluminum technology is the creation of aluminum foam by mixing a compound (a metal hybrid) with molten aluminum that produces hydrogen gas. (blogarama.com)

Anatomy11

Organisms3

Diseases12

Chemicals and Drugs101

Analytical, Diagnostic and Therapeutic Techniques and Equipment75

Phenomena and Processes38

Disciplines and Occupations3

Anthropology, Education, Sociology and Social Phenomena1

Technology, Industry, Agriculture44

Information Science1

Health Care14

Geographicals1

Oxide17

Zirconia7

Al2O36

Composites5

Powders7

Manufacturing17

Purity4

Powder15

Slurry3

Hardness5

Behavior1

Complex geometries1

RESIN1

Lithium battery1

Manganese4

Widely3

Stainless steel2

Particles2

Viscosity1

Silicate3

Material14

Insoluble2

Oxidation3

Thermal2

Absorbs1

Characteristics2

Fabrication2

Magnesium1

Alloy1

Manufacture of ceram1

Titanium2

Processes2

Shrinkage1

Temperature3

Advantages1

Particle2

Development of ceramic1

Applications3

Coating3

Kaolin1

Carbide2

Molten1