Flammable, amorphous, vegetable products of secretion or disintegration, usually formed in special cavities of plants. They are generally insoluble in water and soluble in alcohol, carbon tetrachloride, ether, or volatile oils. They are fusible and have a conchoidal fracture. They are the oxidation or polymerization products of the terpenes, and are mixtures of aromatic acids and esters. Most are soft and sticky, but harden after exposure to cold. (From Grant & Hackh's Chemical Dictionary, 5th ed & Dorland, 28th ed)
Ion Exchange Resins
High molecular weight, insoluble polymers which contain functional groups that are capable of undergoing exchange reactions (ION EXCHANGE) with either cations or anions.
Self-Curing of Dental Resins
The hardening or polymerization of bonding agents (DENTAL CEMENTS) via chemical reactions, usually involving two components. This type of dental bonding uses a self-cure or dual-cure system.
Polymeric resins derived from OXIRANES and characterized by strength and thermosetting properties. Epoxy resins are often used as dental materials.
An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing.
Bisphenol A-Glycidyl Methacrylate
The reaction product of bisphenol A and glycidyl methacrylate that undergoes polymerization when exposed to ultraviolet light or mixed with a catalyst. It is used as a bond implant material and as the resin component of dental sealants and composite restorative materials.
Anion Exchange Resins
High-molecular-weight insoluble polymers that contain functional cationic groups capable of undergoing exchange reactions with anions.
Poly-2-methylpropenoic acids. Used in the manufacture of methacrylate resins and plastics in the form of pellets and granules, as absorbent for biological materials and as filters; also as biological membranes and as hydrogens. Synonyms: methylacrylate polymer; poly(methylacrylate); acrylic acid methyl ester polymer.
The methyl esters of methacrylic acid that polymerize easily and are used as tissue cements, dental materials, and absorbent for biological substances.
Dental Stress Analysis
Cation Exchange Resins
High molecular weight insoluble polymers which contain functional anionic groups that are capable of undergoing exchange reactions with cations.
The mechanical property of material that determines its resistance to force. HARDNESS TESTS measure this property.
Cements that act through infiltration and polymerization within the dentinal matrix and are used for dental restoration. They can be adhesive resins themselves, adhesion-promoting monomers, or polymerization initiators that act in concert with other agents to form a dentin-bonding system.
Light-Curing of Dental Adhesives
The hardening or polymerization of bonding agents (DENTAL CEMENTS) via exposure to light.
Chemical reaction in which monomeric components are combined to form POLYMERS (e.g., POLYMETHYLMETHACRYLATE).
A group of thermoplastic or thermosetting polymers containing polyisocyanate. They are used as ELASTOMERS, as coatings, as fibers and as foams.
The methyl ester of methacrylic acid. It polymerizes easily to form POLYMETHYL METHACRYLATE. It is used as a bone cement.
Polymeric resins containing a combination of SILOXANES and OXIRANES.
Dental Restoration, Permanent
Biologically functional sequences of DNA chemically synthesized in vitro.
Substances used to bond COMPOSITE RESINS to DENTAL ENAMEL and DENTIN. These bonding or luting agents are used in restorative dentistry, ROOT CANAL THERAPY; PROSTHODONTICS; and ORTHODONTICS.
The internal resistance of a material to moving some parts of it parallel to a fixed plane, in contrast to stretching (TENSILE STRENGTH) or compression (COMPRESSIVE STRENGTH). Ionic crystals are brittle because, when subjected to shear, ions of the same charge are brought next to each other, which causes repulsion.
Polymerized methyl methacrylate monomers which are used as sheets, moulding, extrusion powders, surface coating resins, emulsion polymers, fibers, inks, and films (From International Labor Organization, 1983). This material is also used in tooth implants, bone cements, and hard corneal contact lenses.
Acid Etching, Dental
Preparation of TOOTH surfaces and DENTAL MATERIALS with etching agents, usually phosphoric acid, to roughen the surface to increase adhesion or osteointegration.
Dental Marginal Adaptation
A test to determine the relative hardness of a metal, mineral, or other material according to one of several scales, such as Brinell, Mohs, Rockwell, Vickers, or Shore. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 6th ed)
Dental Restoration Failure
Hard, amorphous, brittle, inorganic, usually transparent, polymerous silicate of basic oxides, usually potassium or sodium. It is used in the form of hard sheets, vessels, tubing, fibers, ceramics, beads, etc.
Microscopy, Electron, Scanning
Microscopy in which the object is examined directly by an electron beam scanning the specimen point-by-point. The image is constructed by detecting the products of specimen interactions that are projected above the plane of the sample, such as backscattered electrons. Although SCANNING TRANSMISSION ELECTRON MICROSCOPY also scans the specimen point by point with the electron beam, the image is constructed by detecting the electrons, or their interaction products that are transmitted through the sample plane, so that is a form of TRANSMISSION ELECTRON MICROSCOPY.
Molecular Sequence Data
Descriptions of specific amino acid, carbohydrate, or nucleotide sequences which have appeared in the published literature and/or are deposited in and maintained by databanks such as GENBANK, European Molecular Biology Laboratory (EMBL), National Biomedical Research Foundation (NBRF), or other sequence repositories.
The visually perceived property of objects created by absorption or reflection of specific wavelengths of light.
A hard thin translucent layer of calcified substance which envelops and protects the dentin of the crown of the tooth. It is the hardest substance in the body and is almost entirely composed of calcium salts. Under the microscope, it is composed of thin rods (enamel prisms) held together by cementing substance, and surrounded by an enamel sheath. (From Jablonski, Dictionary of Dentistry, 1992, p286)
Inorganic derivatives of phosphoric acid (H3PO4). Note that organic derivatives of phosphoric acids are listed under ORGANOPHOSPHATES.
Amino Acid Sequence
An oxide of aluminum, occurring in nature as various minerals such as bauxite, corundum, etc. It is used as an adsorbent, desiccating agent, and catalyst, and in the manufacture of dental cements and refractories.
A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992)
Preparation of TOOTH surfaces, and of materials bonded to teeth or DENTAL IMPLANTS, with agents and methods which roughen the surface to facilitate adhesion. Agents include phosphoric or other acids (ACID ETCHING, DENTAL) and methods include LASERS.
Post and Core Technique
Substances that cause the adherence of two surfaces. They include glues (properly collagen-derived adhesives), mucilages, sticky pastes, gums, resins, or latex.
Carbon Compounds, Inorganic
The use of a layer of tooth-colored material, usually porcelain or acrylic resin, applied to the surface of natural teeth, crowns, or pontics by fusion, cementation, or mechanical retention.
Glass Ionomer Cements
A polymer obtained by reacting polyacrylic acid with a special anion-leachable glass (alumino-silicate). The resulting cement is more durable and tougher than others in that the materials comprising the polymer backbone do not leach out.
Members of the class of compounds composed of AMINO ACIDS joined together by peptide bonds between adjacent amino acids into linear, branched or cyclical structures. OLIGOPEPTIDES are composed of approximately 2-12 amino acids. Polypeptides are composed of approximately 13 or more amino acids. PROTEINS are linear polypeptides that are normally synthesized on RIBOSOMES.
Dental Cavity Lining
An inner coating, as of varnish or other protective substance, to cover the dental cavity wall. It is usually a resinous film-forming agent dissolved in a volatile solvent, or a suspension of calcium hydroxide in a solution of a synthetic resin. The lining seals the dentinal tubules and protects the pulp before a restoration is inserted. (Jablonski, Illustrated Dictionary of Dentistry, 1982)
Silicon polymers that contain alternate silicon and oxygen atoms in linear or cyclic molecular structures.
Chemical compound used to initiate polymerization of dental resins by the use of DENTAL CURING LIGHTS. It absorbs UV light and undergoes decomposition into free radicals that initiate polymerization process of the resins in the mix. Each photoinitiator has optimum emission spectrum and intensity for proper curing of dental materials.
Analysis of Variance
Transparent, tasteless crystals found in nature as agate, amethyst, chalcedony, cristobalite, flint, sand, QUARTZ, and tridymite. The compound is insoluble in water or acids except hydrofluoric acid.
Dental Prosthesis Design
The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal.
Diamond. A crystalline form of carbon that occurs as hard, colorless or tinted isomeric crystals. It is used as a precious stone, for cutting glass, and as bearings for delicate mechanisms. (From Grant & Hackh's Chemical Dictionary, 5th ed)
Any of the numerous types of clay which contain varying proportions of Al2O3 and SiO2. They are made synthetically by heating aluminum fluoride at 1000-2000 degrees C with silica and water vapor. (From Hawley's Condensed Chemical Dictionary, 11th ed)
Composite materials composed of an ion-leachable glass embedded in a polymeric matrix. They differ from GLASS IONOMER CEMENTS in that partially silanized glass particles are used to provide a direct bond to the resin matrix and the matrix is primarily formed by a light-activated, radical polymerization reaction.
Dental Restoration, Temporary
A prosthesis or restoration placed for a limited period, from several days to several months, which is designed to seal the tooth and maintain its position until a permanent restoration (DENTAL RESTORATION, PERMANENT) will replace it. (From Jablonski, Dictionary of Dentistry, 1992)
Polymers of ETHYLENE OXIDE and water, and their ethers. They vary in consistency from liquid to solid depending on the molecular weight indicated by a number following the name. They are used as SURFACTANTS, dispersing agents, solvents, ointment and suppository bases, vehicles, and tablet excipients. Some specific groups are NONOXYNOLS, OCTOXYNOLS, and POLOXAMERS.
Break or rupture of a tooth or tooth root.
Small metal or ceramic attachments used to fasten an arch wire. These attachments are soldered or welded to an orthodontic band or cemented directly onto the teeth. Bowles brackets, edgewise brackets, multiphase brackets, ribbon arch brackets, twin-wire brackets, and universal brackets are all types of orthodontic brackets.
Dental Prosthesis Retention
Holding a DENTAL PROSTHESIS in place by its design, or by the use of additional devices or adhesives.
The property of objects that determines the direction of heat flow when they are placed in direct thermal contact. The temperature is the energy of microscopic motions (vibrational and translational) of the particles of atoms.
Water-soluble low-molecular-weight polymers of acrylic or methacrylic acid that form solid, insoluble products when mixed with specially prepared ZnO powder. The resulting cement adheres to dental enamel and is also used as a luting agent.
A yellowish fossil resin, the gum of several species of coniferous trees, found in the alluvial deposits of northeastern Germany. It is used in molecular biology in the analysis of organic matter fossilized in amber.
Chromatography, High Pressure Liquid
Hydrofluoric acid. A solution of hydrogen fluoride in water. It is a colorless fuming liquid which can cause painful burns.
The infiltrating of histological specimens with plastics, including acrylic resins, epoxy resins and polyethylene glycol, for support of the tissues in preparation for sectioning with a microtome.
Tooth Preparation, Prosthodontic
The selected form given to a natural tooth when it is reduced by instrumentation to receive a prosthesis (e.g., artificial crown or a retainer for a fixed or removable prosthesis). The selection of the form is guided by clinical circumstances and physical properties of the materials that make up the prosthesis. (Boucher's Clinical Dental Terminology, 4th ed, p239)
The adhesion of gases, liquids, or dissolved solids onto a surface. It includes adsorptive phenomena of bacteria and viruses onto surfaces as well. ABSORPTION into the substance may follow but not necessarily.
Dental Casting Technique
Air Abrasion, Dental
A technique using a pneumatic, high-pressure stream of aluminum oxide to remove DENTAL ENAMEL; DENTIN; and restorative materials from teeth. In contrast to using DENTAL HIGH-SPEED EQUIPMENT, this method usually requires no dental anesthesia (ANESTHESIA, DENTAL) and reduces risks of tooth chipping and microfracturing. It is used primarily for routine DENTAL CAVITY PREPARATION.
Electron Probe Microanalysis
Identification and measurement of ELEMENTS and their location based on the fact that X-RAYS emitted by an element excited by an electron beam have a wavelength characteristic of that element and an intensity related to its concentration. It is performed with an electron microscope fitted with an x-ray spectrometer, in scanning or transmission mode.
A class of statistical methods applicable to a large set of probability distributions used to test for correlation, location, independence, etc. In most nonparametric statistical tests, the original scores or observations are replaced by another variable containing less information. An important class of nonparametric tests employs the ordinal properties of the data. Another class of tests uses information about whether an observation is above or below some fixed value such as the median, and a third class is based on the frequency of the occurrence of runs in the data. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed, p1284; Corsini, Concise Encyclopedia of Psychology, 1987, p764-5)
Any technique by which an unknown color is evaluated in terms of standard colors. The technique may be visual, photoelectric, or indirect by means of spectrophotometry. It is used in chemistry and physics. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)
A species of gram-negative, facultatively anaerobic, rod-shaped bacteria (GRAM-NEGATIVE FACULTATIVELY ANAEROBIC RODS) commonly found in the lower part of the intestine of warm-blooded animals. It is usually nonpathogenic, but some strains are known to produce DIARRHEA and pyogenic infections. Pathogenic strains (virotypes) are classified by their specific pathogenic mechanisms such as toxins (ENTEROTOXIGENIC ESCHERICHIA COLI), etc.
The most posterior teeth on either side of the jaw, totaling eight in the deciduous dentition (2 on each side, upper and lower), and usually 12 in the permanent dentition (three on each side, upper and lower). They are grinding teeth, having large crowns and broad chewing surfaces. (Jablonski, Dictionary of Dentistry, 1992, p821)
Silver. An element with the atomic symbol Ag, atomic number 47, and atomic weight 107.87. It is a soft metal that is used medically in surgical instruments, dental prostheses, and alloys. Long-continued use of silver salts can lead to a form of poisoning known as ARGYRIA.
Denture, Partial, Removable
An alloy used in restorative dentistry that contains mercury, silver, tin, copper, and possibly zinc.
Denture, Partial, Temporary
Presence of warmth or heat or a temperature notably higher than an accustomed norm.
Chromatography, Ion Exchange
Separation technique in which the stationary phase consists of ion exchange resins. The resins contain loosely held small ions that easily exchange places with other small ions of like charge present in solutions washed over the resins.
The process in which substances, either endogenous or exogenous, bind to proteins, peptides, enzymes, protein precursors, or allied compounds. Specific protein-binding measures are often used as assays in diagnostic assessments.
Denture, Complete, Upper
A ready-made or custom-made prosthesis of glass or plastic shaped and colored to resemble the anterior portion of a normal eye and used for cosmetic reasons. It is attached to the anterior portion of an orbital implant (ORBITAL IMPLANTS) which is placed in the socket of an enucleated or eviscerated eye. (From Dorland, 28th ed)
Spectroscopy, Fourier Transform Infrared
Denture, Partial, Fixed, Resin-Bonded
A commonly used prosthesis that results in a strong, permanent restoration. It consists of an electrolytically etched cast-metal retainer that is cemented (bonded), using resins, to adjacent teeth whose enamel was previously acid-treated (acid-etched). This type of bridgework is sometimes referred to as a Maryland bridge.
Denture, Partial, Fixed
A partial denture attached to prepared natural teeth, roots, or implants by cementation.
Coated Materials, Biocompatible
Chemistry Techniques, Synthetic
Proteins prepared by recombinant DNA technology.
Zinc Phosphate Cement
A material used for cementation of inlays, crowns, bridges, and orthodontic appliances and occasionally as a temporary restoration. It is prepared by mixing zinc oxide and magnesium oxide powders with a liquid consisting principally of phosphoric acid, water, and buffers. (From Bouchers' Clinical Dental Terminology, 3d ed)
Magnetic Resonance Spectroscopy
A deoxyribonucleotide polymer that is the primary genetic material of all cells. Eukaryotic and prokaryotic organisms normally contain DNA in a double-stranded state, yet several important biological processes transiently involve single-stranded regions. DNA, which consists of a polysugar-phosphate backbone possessing projections of purines (adenine and guanine) and pyrimidines (thymine and cytosine), forms a double helix that is held together by hydrogen bonds between these purines and pyrimidines (adenine to thymine and guanine to cytosine).
Chemical reactions effected by light.
Dental Restoration Repair
Technique whereby the weight of a sample can be followed over a period of time while its temperature is being changed (usually increased at a constant rate).
The part of a tooth from the neck to the apex, embedded in the alveolar process and covered with cementum. A root may be single or divided into several branches, usually identified by their relative position, e.g., lingual root or buccal root. Single-rooted teeth include mandibular first and second premolars and the maxillary second premolar teeth. The maxillary first premolar has two roots in most cases. Maxillary molars have three roots. (Jablonski, Dictionary of Dentistry, 1992, p690)
The use of a chemical oxidizing agent to whiten TEETH. In some procedures the oxidation process is activated by the use of heat or light.
Quartz (SiO2). A glassy or crystalline form of silicon dioxide. Many colored varieties are semiprecious stones. (From Grant & Hackh's Chemical Dictionary, 5th ed)
Indicators and Reagents
Substances used for the detection, identification, analysis, etc. of chemical, biological, or pathologic processes or conditions. Indicators are substances that change in physical appearance, e.g., color, at or approaching the endpoint of a chemical titration, e.g., on the passage between acidity and alkalinity. Reagents are substances used for the detection or determination of another substance by chemical or microscopical means, especially analysis. Types of reagents are precipitants, solvents, oxidizers, reducers, fluxes, and colorimetric reagents. (From Grant & Hackh's Chemical Dictionary, 5th ed, p301, p499)
Inorganic salts of hydrofluoric acid, HF, in which the fluorine atom is in the -1 oxidation state. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed) Sodium and stannous salts are commonly used in dentifrices.
An element of the rare earth family of metals. It has the atomic symbol Y, atomic number 39, and atomic weight 88.91. In conjunction with other rare earths, yttrium is used as a phosphor in television receivers and is a component of the yttrium-aluminum garnet (YAG) lasers.
The joining of objects by means of a cement (e.g., in fracture fixation, such as in hip arthroplasty for joining of the acetabular component to the femoral component). In dentistry, it is used for the process of attaching parts of a tooth or restorative material to a natural tooth or for the attaching of orthodontic bands to teeth by means of an adhesive.