Inlays: Restorations of metal, porcelain, or plastic made to fit a cavity preparation, then cemented into the tooth. Onlays are restorations which fit into cavity preparations and overlay the occlusal surface of a tooth or teeth. Onlays are retained by frictional or mechanical factors.Inlay Casting Wax: A mixture of several dental waxes, usually containing paraffin wax, ceresin, beeswax, resins, and other natural and synthetic waxes. It is used for making patterns to determine the shape of the metallic framework and other parts of removable partial dentures. (From Jablonski's Dictionary of Dentistry, 1992, p868)Dental Cavity Preparation: An operation in which carious material is removed from teeth and biomechanically correct forms are established in the teeth to receive and retain restorations. A constant requirement is provision for prevention of failure of the restoration through recurrence of decay or inadequate resistance to applied stresses. (Boucher's Clinical Dental Terminology, 4th ed, p239-40)Tooth Fractures: Break or rupture of a tooth or tooth root.Dental Porcelain: A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992)Dental Marginal Adaptation: The degree of approximation or fit of filling material or dental prosthetic to the tooth surface. A close marginal adaptation and seal at the interface is important for successful dental restorations.Dental Prosthesis Design: The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal.Computer-Aided Design: The use of computers for designing and/or manufacturing of anything, including drugs, surgical procedures, orthotics, and prosthetics.Composite Resins: Synthetic resins, containing an inert filler, that are widely used in dentistry.Dental Casting Investment: Material from which the casting mold is made in the fabrication of gold or cobalt-chromium castings. (Boucher's Clinical Dental Terminology, 4th ed, p168)Dental Restoration Failure: Inability or inadequacy of a dental restoration or prosthesis to perform as expected.Materials Testing: The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility.Dental Restoration, Permanent: A restoration designed to remain in service for not less than 20 to 30 years, usually made of gold casting, cohesive gold, or amalgam. (Jablonski, Dictionary of Dentistry, 1992)Bicuspid: One of the eight permanent teeth, two on either side in each jaw, between the canines (CUSPID) and the molars (MOLAR), serving for grinding and crushing food. The upper have two cusps (bicuspid) but the lower have one to three. (Jablonski, Dictionary of Dentistry, 1992, p822)Dental Casting Technique: The process of producing a form or impression made of metal or plaster using a mold.Dental Stress Analysis: The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures.Tooth Crown: The upper part of the tooth, which joins the lower part of the tooth (TOOTH ROOT) at the cervix (TOOTH CERVIX) at a line called the cementoenamel junction. The entire surface of the crown is covered with enamel which is thicker at the extremity and becomes progressively thinner toward the cervix. (From Jablonski, Dictionary of Dentistry, 1992, p216)Molar: The most posterior teeth on either side of the jaw, totaling eight in the deciduous dentition (2 on each side, upper and lower), and usually 12 in the permanent dentition (three on each side, upper and lower). They are grinding teeth, having large crowns and broad chewing surfaces. (Jablonski, Dictionary of Dentistry, 1992, p821)Dental Restoration Wear: Occlusal wear of the surfaces of restorations and surface wear of dentures.Bisphenol A-Glycidyl Methacrylate: The reaction product of bisphenol A and glycidyl methacrylate that undergoes polymerization when exposed to ultraviolet light or mixed with a catalyst. It is used as a bond implant material and as the resin component of dental sealants and composite restorative materials.Dental Impression Materials: Substances used to create an impression, or negative reproduction, of the teeth and dental arches. These materials include dental plasters and cements, metallic oxide pastes, silicone base materials, or elastomeric materials.Dental Materials: Materials used in the production of dental bases, restorations, impressions, prostheses, etc.Polyethylene: A vinyl polymer made from ethylene. It can be branched or linear. Branched or low-density polyethylene is tough and pliable but not to the same degree as linear polyethylene. Linear or high-density polyethylene has a greater hardness and tensile strength. Polyethylene is used in a variety of products, including implants and prostheses.Aluminum Oxide: An oxide of aluminum, occurring in nature as various minerals such as bauxite, corundum, etc. It is used as an adsorbent, desiccating agent, and catalyst, and in the manufacture of dental cements and refractories.Hydrofluoric Acid: Hydrofluoric acid. A solution of hydrogen fluoride in water. It is a colorless fuming liquid which can cause painful burns.Polymethacrylic Acids: Poly-2-methylpropenoic acids. Used in the manufacture of methacrylate resins and plastics in the form of pellets and granules, as absorbent for biological materials and as filters; also as biological membranes and as hydrogens. Synonyms: methylacrylate polymer; poly(methylacrylate); acrylic acid methyl ester polymer.Nanocomposites: Nanometer-scale composite structures composed of organic molecules intimately incorporated with inorganic molecules. (Glossary of Biotechnology and Nanobiotechology Terms, 4th ed)Hardness: The mechanical property of material that determines its resistance to force. HARDNESS TESTS measure this property.Methylmethacrylates: The methyl esters of methacrylic acid that polymerize easily and are used as tissue cements, dental materials, and absorbent for biological substances.Ceramics: Products made by baking or firing nonmetallic minerals (clay and similar materials). In making dental restorations or parts of restorations the material is fused porcelain. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed & Boucher's Clinical Dental Terminology, 4th ed)Resin Cements: Dental cements composed either of polymethyl methacrylate or dimethacrylate, produced by mixing an acrylic monomer liquid with acrylic polymers and mineral fillers. The cement is insoluble in water and is thus resistant to fluids in the mouth, but is also irritating to the dental pulp. It is used chiefly as a luting agent for fabricated and temporary restorations. (Jablonski's Dictionary of Dentistry, 1992, p159)Urologic Surgical Procedures, Male: Surgery performed on the male genitalia.Crowns: A prosthetic restoration that reproduces the entire surface anatomy of the visible natural crown of a tooth. It may be partial (covering three or more surfaces of a tooth) or complete (covering all surfaces). It is made of gold or other metal, porcelain, or resin.Dental Bonding: An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing.Scleral Diseases: General disorders of the sclera or white of the eye. They may include anatomic, embryologic, degenerative, or pigmentation defects.Polyurethanes: A group of thermoplastic or thermosetting polymers containing polyisocyanate. They are used as ELASTOMERS, as coatings, as fibers and as foams.Dental Cements: Substances used to bond COMPOSITE RESINS to DENTAL ENAMEL and DENTIN. These bonding or luting agents are used in restorative dentistry, ROOT CANAL THERAPY; PROSTHODONTICS; and ORTHODONTICS.Presbyopia: The normal decreasing elasticity of the crystalline lens that leads to loss of accommodation.Keratomileusis, Laser In Situ: A surgical procedure to correct MYOPIA by CORNEAL STROMA subtraction. It involves the use of a microkeratome to make a lamellar dissection of the CORNEA creating a flap with intact CORNEAL EPITHELIUM. After the flap is lifted, the underlying midstroma is reshaped with an EXCIMER LASER and the flap is returned to its original position.Refractive Surgical Procedures: Surgical procedures employed to correct REFRACTIVE ERRORS such as MYOPIA; HYPEROPIA; or ASTIGMATISM. These may involve altering the curvature of the CORNEA; removal or replacement of the CRYSTALLINE LENS; or modification of the SCLERA to change the axial length of the eye.Holy Roman Empire: Realm in central Europe consisting of a confederation of German and Italian territories under the suzerainty of an emperor and existing from the 9th or 10th century to 1806.Photorefractive Keratectomy: A type of refractive surgery of the CORNEA to correct MYOPIA and ASTIGMATISM. An EXCIMER LASER is used directly on the surface of the EYE to remove some of the CORNEAL EPITHELIUM thus reshaping the anterior curvature of the cornea.Lasers, Excimer: Gas lasers with excited dimers (i.e., excimers) as the active medium. The most commonly used are rare gas monohalides (e.g., argon fluoride, xenon chloride). Their principal emission wavelengths are in the ultraviolet range and depend on the monohalide used (e.g., 193 nm for ArF, 308 nm for Xe Cl). These lasers are operated in pulsed and Q-switched modes and used in photoablative decomposition involving actual removal of tissue. (UMDNS, 2005)Refractive Errors: Deviations from the average or standard indices of refraction of the eye through its dioptric or refractive apparatus.Corneal Stroma: The lamellated connective tissue constituting the thickest layer of the cornea between the Bowman and Descemet membranes.History, 17th Century: Time period from 1601 through 1700 of the common era.History, 15th Century: Time period from 1401 through 1500 of the common era.Cornea: The transparent anterior portion of the fibrous coat of the eye consisting of five layers: stratified squamous CORNEAL EPITHELIUM; BOWMAN MEMBRANE; CORNEAL STROMA; DESCEMET MEMBRANE; and mesenchymal CORNEAL ENDOTHELIUM. It serves as the first refracting medium of the eye. It is structurally continuous with the SCLERA, avascular, receiving its nourishment by permeation through spaces between the lamellae, and is innervated by the ophthalmic division of the TRIGEMINAL NERVE via the ciliary nerves and those of the surrounding conjunctiva which together form plexuses. (Cline et al., Dictionary of Visual Science, 4th ed)Bone and Bones: A specialized CONNECTIVE TISSUE that is the main constituent of the SKELETON. The principle cellular component of bone is comprised of OSTEOBLASTS; OSTEOCYTES; and OSTEOCLASTS, while FIBRILLAR COLLAGENS and hydroxyapatite crystals form the BONE MATRIX.Pelvic Floor: Soft tissue formed mainly by the pelvic diaphragm, which is composed of the two levator ani and two coccygeus muscles. The pelvic diaphragm lies just below the pelvic aperture (outlet) and separates the pelvic cavity from the PERINEUM. It extends between the PUBIC BONE anteriorly and the COCCYX posteriorly.Photobacterium: A genus of gram-negative, facultatively anaerobic, rod-shaped bacteria that are common in the marine environment and on the surfaces and in the intestinal contents of marine animals. Some species are bioluminescent and are found as symbionts in specialized luminous organs of fish.Floors and Floorcoverings: The surface of a structure upon which one stands or walks.Mirror Neurons: Neurons that fire when an animal acts or observes the same action of another thus coding the motor response. They were originally discovered in the premotor and parietal cortex of the monkey and studies have shown that neurons that have a similar mechanism are present in humans. Mirror neurons are theorized to be related to social cognition.