A denture replacing all natural teeth and associated structures in both the maxilla and mandible.
An appliance used as an artificial or prosthetic replacement for missing teeth and adjacent tissues. It does not include CROWNS; DENTAL ABUTMENTS; nor TOOTH, ARTIFICIAL.
The plan, delineation, and location of actual structural elements of dentures. The design can relate to retainers, stress-breakers, occlusal rests, flanges, framework, lingual or palatal bars, reciprocal arms, etc.
The part of a denture that overlies the soft tissue and supports the supplied teeth and is supported in turn by abutment teeth or the residual alveolar ridge. It is usually made of resins or metal or their combination.
A complete denture replacing all the natural maxillary teeth and associated maxillary structures. It is completely supported by the oral tissue and underlying maxillary bone.
A partial denture designed and constructed to be removed readily from the mouth.
Inflammation of the mouth due to denture irritation.
A complete denture replacing all the natural mandibular teeth and associated structures. It is completely supported by the oral tissue and underlying mandibular bone.
The retention of a denture in place by design, device, or adhesion.
Substances used to clean dentures; they are usually alkaline peroxides or hypochlorites, may contain enzymes and release oxygen. Use also for sonic action cleaners.
Material applied to the tissue side of a denture to provide a soft lining to the parts of a denture coming in contact with soft tissue. It cushions contact of the denture with the tissues.
Removable prosthesis constructed over natural teeth or implanted studs.
A partial denture attached to prepared natural teeth, roots, or implants by cementation.
A denture replacing one or more (but not all) natural teeth. It is supported and retained by underlying tissue and some or all of the remaining teeth.
A fabricated tooth substituting for a natural tooth in a prosthesis. It is usually made of porcelain or plastic.
The process of refitting a denture by replacing the denture base material without changing the occlusal relations of the teeth. Rebasing may include adding to the denture base to compensate for resorptive changes to subjacent structures.
A commonly used prosthesis that results in a strong, permanent restoration. It consists of an electrolytically etched cast-metal retainer that is cemented (bonded), using resins, to adjacent teeth whose enamel was previously acid-treated (acid-etched). This type of bridgework is sometimes referred to as a Maryland bridge.
Acrylic resins, also known as polymethyl methacrylate (PMMA), are a type of synthetic resin formed from polymerized methyl methacrylate monomers, used in various medical applications such as dental restorations, orthopedic implants, and ophthalmic lenses due to their biocompatibility, durability, and transparency.
The process of reuniting or replacing broken or worn parts of a denture.
Materials used in the production of dental bases, restorations, impressions, prostheses, etc.
The total absence of teeth from either the mandible or the maxilla, but not both. Total absence of teeth from both is MOUTH, EDENTULOUS. Partial absence of teeth in either is JAW, EDENTULOUS, PARTIALLY.
Any system of defining ownership of dentures or dental prostheses.
Polymerized methyl methacrylate monomers which are used as sheets, moulding, extrusion powders, surface coating resins, emulsion polymers, fibers, inks, and films (From International Labor Organization, 1983). This material is also used in tooth implants, bone cements, and hard corneal contact lenses.
Total lack of teeth through disease or extraction.
Natural teeth or teeth roots used as anchorage for a fixed or removable denture or other prosthesis (such as an implant) serving the same purpose.
Absence of teeth from a portion of the mandible and/or maxilla.
A prosthesis that gains its support, stability, and retention from a substructure that is implanted under the soft tissues of the basal seat of the device and is in contact with bone. (From Boucher's Clinical Dental Terminology, 4th ed)
The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility.
The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures.
The process of producing a form or impression made of metal or plaster using a mold.
The quality or state of being able to be bent or creased repeatedly. (From Webster, 3d ed)
Metal devices for fastening together two or more parts of dental prostheses for stabilizing or retaining them by attachment to abutment teeth. For a precision attachment for a partial denture DENTURE PRECISION ATTACHMENT is available.
Dental occlusion in which the occlusal contact of the teeth on the working side of the jaw is accompanied by the harmonious contact of the teeth on the opposite (balancing) side. (From Jablonski, Dictionary of Dentistry, 1992, p556)
Procedure of producing an imprint or negative likeness of the teeth and/or edentulous areas. Impressions are made in plastic material which becomes hardened or set while in contact with the tissue. They are later filled with plaster of Paris or artificial stone to produce a facsimile of the oral structures present. Impressions may be made of a full complement of teeth, of areas where some teeth have been removed, or in a mouth from which all teeth have been extracted. (Illustrated Dictionary of Dentistry, 1982)
A precision device used for attaching a fixed or removable partial denture to the crown of an abutment tooth or a restoration. One type is the intracoronal attachment and the other type is the extracoronal attachment. It consists of a female portion within the coronal portion of the crown of an abutment and a fitted male portion attached to the denture proper. (Jablonski, Dictionary of Dentistry, 1992, p85; from Boucher's Clinical Dental Terminology, 4th ed, p264)
Specific alloys not less than 85% chromium and nickel or cobalt, with traces of either nickel or cobalt, molybdenum, and other substances. They are used in partial dentures, orthopedic implants, etc.
The methyl ester of methacrylic acid. It polymerizes easily to form POLYMETHYL METHACRYLATE. It is used as a bone cement.
A dental specialty concerned with the restoration and maintenance of oral function by the replacement of missing TEETH and related structures by artificial devices or DENTAL PROSTHESES.
The act and process of chewing and grinding food in the mouth.
The methyl esters of methacrylic acid that polymerize easily and are used as tissue cements, dental materials, and absorbent for biological substances.
Characteristics or attributes of the outer boundaries of objects, including molecules.
Coloring, shading, or tinting of prosthetic components, devices, and materials.
Inability or inadequacy of a dental restoration or prosthesis to perform as expected.
The selected form given to a natural tooth when it is reduced by instrumentation to receive a prosthesis (e.g., artificial crown or a retainer for a fixed or removable prosthesis). The selection of the form is guided by clinical circumstances and physical properties of the materials that make up the prosthesis. (Boucher's Clinical Dental Terminology, 4th ed, p239)
Occlusal wear of the surfaces of restorations and surface wear of dentures.
Mechanical devices that simulate the temporomandibular joints and jaws to which maxillary and mandibular casts are attached. The entire assembly attempts to reproduce the movements of the mandible and the various tooth-to-tooth relationships that accompany those movements.
A partial denture intended for short-term use in a temporary or emergency situation.
Creation of a smooth and glossy surface finish on a denture or amalgam.
The placing of a body or a part thereof into a liquid.
Chemical reaction in which monomeric components are combined to form POLYMERS (e.g., POLYMETHYLMETHACRYLATE).
Accumulations of microflora that lead to pathological plaque and calculus which cause PERIODONTAL DISEASES. It can be considered a type of BIOFILMS. It is subtly distinguished from the protective DENTAL PELLICLE.
An artificial replacement for one or more natural teeth or part of a tooth, or associated structures, ranging from a portion of a tooth to a complete denture. The dental prosthesis is used for cosmetic or functional reasons, or both. DENTURES and specific types of dentures are also available. (From Boucher's Clinical Dental Terminology, 4th ed, p244 & Jablonski, Dictionary of Dentistry, 1992, p643)
Chemicals especially for use on instruments to destroy pathogenic organisms. (Boucher, Clinical Dental Terminology, 4th ed)
Presentation devices used for patient education and technique training in dentistry.
Inorganic or organic salts and esters of boric acid.
The practice of personal hygiene of the mouth. It includes the maintenance of oral cleanliness, tissue tone, and general preservation of oral health.
Substances used to create an impression, or negative reproduction, of the teeth and dental arches. These materials include dental plasters and cements, metallic oxide pastes, silicone base materials, or elastomeric materials.
Silicon polymers that contain alternate silicon and oxygen atoms in linear or cyclic molecular structures.
That portion of the electromagnetic spectrum from the UHF (ultrahigh frequency) radio waves and extending into the INFRARED RAYS frequencies.
Facilities for the performance of services related to dental treatment but not done directly in the patient's mouth.
Acrylic acids or acrylates which are substituted in the C-2 position with a methyl group.
The force applied by the masticatory muscles in dental occlusion.
Restorations of metal, porcelain, or plastic made to fit a cavity preparation, then cemented into the tooth. Onlays are restorations which fit into cavity preparations and overlay the occlusal surface of a tooth or teeth. Onlays are retained by frictional or mechanical factors.
A registration of any positional relationship of the mandible in reference to the maxillae. These records may be any of the many vertical, horizontal, or orientation relations. (Jablonski, Illustrated Dictionary of Dentistry)
Biocompatible materials placed into (endosseous) or onto (subperiosteal) the jawbone to support a crown, bridge, or artificial tooth, or to stabilize a diseased tooth.
Individuals who fabricate and fit DENTURES without the supervision of DENTISTS. (from Stedman's Medical Dictionary, 27th ed) They may or may not have formal education in health sciences, but are well versed in the art of constructing dentures.
Infection of the mucous membranes of the mouth by a fungus of the genus CANDIDA. (Dorland, 27th ed)
The act of cleaning teeth with a brush to remove plaque and prevent tooth decay. (From Webster, 3d ed)
A disinfectant and topical anti-infective agent used also as mouthwash to prevent oral plaque.
A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992)
A mixture of liquid hydrocarbons obtained from petroleum. It is used as laxative, lubricant, ointment base, and emollient.
The location of the maxillary and the mandibular condyles when they are in their most posterior and superior positions in their fossae of the temporomandibular joint.
'Polyvinyls' is a term that refers to a group of polymers synthesized from vinyl chloride, including polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC), which are widely used in various medical applications such as manufacturing of medical devices, tubing, packaging materials, and pharmaceutical containers due to their chemical resistance, durability, and versatility.
Solutions for rinsing the mouth, possessing cleansing, germicidal, or palliative properties. (From Boucher's Clinical Dental Terminology, 4th ed)
Substances that cause the adherence of two surfaces. They include glues (properly collagen-derived adhesives), mucilages, sticky pastes, gums, resins, or latex.
The visually perceived property of objects created by absorption or reflection of specific wavelengths of light.
Skills, techniques, standards, and principles used to improve the art and symmetry of the teeth and face to improve the appearance as well as the function of the teeth, mouth, and face. (From Boucher's Clinical Dental Terminology, 4th ed, p108)
A complex sulfated polymer of galactose units, extracted from Gelidium cartilagineum, Gracilaria confervoides, and related red algae. It is used as a gel in the preparation of solid culture media for microorganisms, as a bulk laxative, in making emulsions, and as a supporting medium for immunodiffusion and immunoelectrophoresis.
A mixture of metallic elements or compounds with other metallic or metalloid elements in varying proportions for use in restorative or prosthetic dentistry.
Contraction of the muscle of the PHARYNX caused by stimulation of sensory receptors on the SOFT PALATE, by psychic stimuli, or systemically by drugs.
The field of dentistry involved in procedures for designing and constructing dental appliances. It includes also the application of any technology to the field of dentistry.
The relationship of all the components of the masticatory system in normal function. It has special reference to the position and contact of the maxillary and mandibular teeth for the highest efficiency during the excursive movements of the jaw that are essential for mastication. (From Jablonski, Dictionary of Dentistry, 1992, p556, p472)
The largest and strongest bone of the FACE constituting the lower jaw. It supports the lower teeth.
Cationic bactericidal surfactant used as a topical antiseptic for skin, wounds, mucous membranes, instruments, etc.; and also as a component in mouthwash and lozenges.
Surgical formation of an external opening (stoma) into the esophagus.
The length of the face determined by the distance of separation of jaws. Occlusal vertical dimension (OVD or VDO) or contact vertical dimension is the lower face height with the teeth in centric occlusion. Rest vertical dimension (VDR) is the lower face height measured from a chin point to a point just below the nose, with the mandible in rest position. (From Jablonski, Dictionary of Dentistry, 1992, p250)
Polymers of silicone that are formed by crosslinking and treatment with amorphous silica to increase strength. They have properties similar to vulcanized natural rubber, in that they stretch under tension, retract rapidly, and fully recover to their original dimensions upon release. They are used in the encapsulation of surgical membranes and implants.
Polymers where the main polymer chain comprises recurring amide groups. These compounds are generally formed from combinations of diamines, diacids, and amino acids and yield fibers, sheeting, or extruded forms used in textiles, gels, filters, sutures, contact lenses, and other biomaterials.
The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal.
Compounds similar to hydrocarbons in which a tetravalent silicon atom replaces the carbon atom. They are very reactive, ignite in air, and form useful derivatives.
A solution used for irrigating the mouth in xerostomia and as a substitute for saliva.
Numerical expression indicating the measure of stiffness in a material. It is defined by the ratio of stress in a unit area of substance to the resulting deformation (strain). This allows the behavior of a material under load (such as bone) to be calculated.
Methylester of cellulose. Methylcellulose is used as an emulsifying and suspending agent in cosmetics, pharmaceutics and the chemical industry. It is used therapeutically as a bulk laxative.
Hard, amorphous, brittle, inorganic, usually transparent, polymerous silicate of basic oxides, usually potassium or sodium. It is used in the form of hard sheets, vessels, tubing, fibers, ceramics, beads, etc.
The quality or state of being wettable or the degree to which something can be wet. This is also the ability of any solid surface to be wetted when in contact with a liquid whose surface tension is reduced so that the liquid spreads over the surface of the solid.
The giving of attention to the special dental needs of the elderly for proper maintenance or treatment. The dental care may include the services provided by dental specialists.
A prosthetic restoration that reproduces the entire surface anatomy of the visible natural crown of a tooth. It may be partial (covering three or more surfaces of a tooth) or complete (covering all surfaces). It is made of gold or other metal, porcelain, or resin.
Lining of the ORAL CAVITY, including mucosa on the GUMS; the PALATE; the LIP; the CHEEK; floor of the mouth; and other structures. The mucosa is generally a nonkeratinized stratified squamous EPITHELIUM covering muscle, bone, or glands but can show varying degree of keratinization at specific locations.
An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing.
Water-soluble low-molecular-weight polymers of acrylic or methacrylic acid that form solid, insoluble products when mixed with specially prepared ZnO powder. The resulting cement adheres to dental enamel and is also used as a luting agent.
Inorganic compounds that contain carbon as an integral part of the molecule but are not derived from hydrocarbons.
Surgical restoration of a perforated tympanic membrane by grafting. (Dorland, 28th ed.)
It is used as an oxidizing and bleaching agent and as a disinfectant. (From Grant & Hackh's Chemical Dictionary, 5th ed)
A partial denture constructed before the teeth it replaces are removed. It is then inserted immediately after the removal of the natural teeth for functional and cosmetic reasons during the healing process. It is to be replaced later by the fitted partial denture.
The maximum stress a material subjected to a stretching load can withstand without tearing. (McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p2001)
Contact between opposing teeth during a person's habitual bite.
Method for measuring viral infectivity and multiplication in CULTURED CELLS. Clear lysed areas or plaques develop as the VIRAL PARTICLES are released from the infected cells during incubation. With some VIRUSES, the cells are killed by a cytopathic effect; with others, the infected cells are not killed but can be detected by their hemadsorptive ability. Sometimes the plaque cells contain VIRAL ANTIGENS which can be measured by IMMUNOFLUORESCENCE.
Descriptions of specific amino acid, carbohydrate, or nucleotide sequences which have appeared in the published literature and/or are deposited in and maintained by databanks such as GENBANK, European Molecular Biology Laboratory (EMBL), National Biomedical Research Foundation (NBRF), or other sequence repositories.
The structure that forms the roof of the mouth. It consists of the anterior hard palate (PALATE, HARD) and the posterior soft palate (PALATE, SOFT).
Insertion of an implant into the bone of the mandible or maxilla. The implant has an exposed head which protrudes through the mucosa and is a prosthodontic abutment.
Abnormal concretion or calcified deposit that forms around the teeth or dental prostheses.
Break or rupture of a tooth or tooth root.
A dark-gray, metallic element of widespread distribution but occurring in small amounts; atomic number, 22; atomic weight, 47.90; symbol, Ti; specific gravity, 4.5; used for fixation of fractures. (Dorland, 28th ed)
One of a pair of irregularly shaped bones that form the upper jaw. A maxillary bone provides tooth sockets for the superior teeth, forms part of the ORBIT, and contains the MAXILLARY SINUS.
The process in which substances, either endogenous or exogenous, bind to proteins, peptides, enzymes, protein precursors, or allied compounds. Specific protein-binding measures are often used as assays in diagnostic assessments.
'Gingival diseases' is a general term for conditions affecting the soft tissues surrounding and supporting the teeth, primarily characterized by inflammation, bleeding, redness, or swelling, which can progress to periodontal disease if left untreated.
Horizontal and, to a lesser degree, axial movement of a tooth in response to normal forces, as in occlusion. It refers also to the movability of a tooth resulting from loss of all or a portion of its attachment and supportive apparatus, as seen in periodontitis, occlusal trauma, and periodontosis. (From Jablonski, Dictionary of Dentistry, 1992, p507 & Boucher's Clinical Dental Terminology, 4th ed, p313)
A genus of yeast-like mitosporic Saccharomycetales fungi characterized by producing yeast cells, mycelia, pseudomycelia, and blastophores. It is commonly part of the normal flora of the skin, mouth, intestinal tract, and vagina, but can cause a variety of infections, including CANDIDIASIS; ONYCHOMYCOSIS; vulvovaginal candidiasis (CANDIDIASIS, VULVOVAGINAL), and thrush (see CANDIDIASIS, ORAL). (From Dorland, 28th ed)
Decreased salivary flow.
The mechanical property of material that determines its resistance to force. HARDNESS TESTS measure this property.
A unicellular budding fungus which is the principal pathogenic species causing CANDIDIASIS (moniliasis).
Zirconium. A rather rare metallic element, atomic number 40, atomic weight 91.22, symbol Zr. (From Dorland, 28th ed)
A complete denture constructed for replacement of natural teeth immediately after their removal. It does not fit the mouth perfectly and is intended only for functional and cosmetic purposes during the healing process after total extraction. It is to be replaced by the fitted permanent denture.
Substances used on humans and other animals that destroy harmful microorganisms or inhibit their activity. They are distinguished from DISINFECTANTS, which are used on inanimate objects.
Alloys that contain a high percentage of gold. They are used in restorative or prosthetic dentistry.
The failure to retain teeth as a result of disease or injury.
Rendering pathogens harmless through the use of heat, antiseptics, antibacterial agents, etc.
The order of amino acids as they occur in a polypeptide chain. This is referred to as the primary structure of proteins. It is of fundamental importance in determining PROTEIN CONFORMATION.
Any liquid or solid preparation made specifically for the growth, storage, or transport of microorganisms or other types of cells. The variety of media that exist allow for the culturing of specific microorganisms and cell types, such as differential media, selective media, test media, and defined media. Solid media consist of liquid media that have been solidified with an agent such as AGAR or GELATIN.
The degree of approximation or fit of filling material or dental prosthetic to the tooth surface. A close marginal adaptation and seal at the interface is important for successful dental restorations.
Preprosthetic surgery involving rib, cartilage, or iliac crest bone grafts, usually autologous, or synthetic implants for rebuilding the alveolar ridge.
Polymers of high molecular weight which at some stage are capable of being molded and then harden to form useful components.
Enumeration by direct count of viable, isolated bacterial, archaeal, or fungal CELLS or SPORES capable of growth on solid CULTURE MEDIA. The method is used routinely by environmental microbiologists for quantifying organisms in AIR; FOOD; and WATER; by clinicians for measuring patients' microbial load; and in antimicrobial drug testing.
Inorganic compounds that contain silicon as an integral part of the molecule.
A purely physical condition which exists within any material because of strain or deformation by external forces or by non-uniform thermal expansion; expressed quantitatively in units of force per unit area.
The study of muscles and the movement of the human body. In holistic medicine it is the balance of movement and the interaction of a person's energy systems. Applied kinesiology is the name given by its inventor, Dr. George Goodheart, to the system of applying muscle testing diagnostically and therapeutically to different aspects of health care. (Thorsons Introductory Guide to Kinesiology, 1992, p13)
A group of thermoplastic or thermosetting polymers containing polyisocyanate. They are used as ELASTOMERS, as coatings, as fibers and as foams.
The study of the energy of electrons ejected from matter by the photoelectric effect, i.e., as a direct result of absorption of energy from electromagnetic radiation. As the energies of the electrons are characteristic of a specific element, the measurement of the energy of these electrons is a technique used to determine the chemical composition of surfaces.
A species of gram-negative, aerobic BACTERIA, found in the human NASOPHARYNX and in the normal flora of the respiratory tissues in DOLPHINS. It is occasionally pathogenic for humans and pathogenic for MICE. (Bergey's Manual of Systemic Bacteriology, 1st edition, p295)
Any of the eight frontal teeth (four maxillary and four mandibular) having a sharp incisal edge for cutting food and a single root, which occurs in man both as a deciduous and a permanent tooth. (Jablonski, Dictionary of Dentistry, 1992, p820)
Process of growing viruses in live animals, plants, or cultured cells.
A prosthesis or restoration placed for a limited period, from several days to several months, which is designed to seal the tooth and maintain its position until a permanent restoration (DENTAL RESTORATION, PERMANENT) will replace it. (From Jablonski, Dictionary of Dentistry, 1992)
The use of a treatment material (tissue conditioner) to re-establish tone and health to irritated oral soft tissue, usually applied to the edentulous alveolar ridge.
Methods of preparing tissue specimens for visualization using an electron microscope, usually a scanning electron microscope. The methods involve the creation of exact copies of the specimens by making a mold or cast (i.e., replica) of the specimen.
'Printing' in a medical context refers to the temporary or permanent transfer of ink from a substrate to the skin, often used for identification purposes, monitoring medical conditions, or as a form of temporary decoration.
A species of MITOSPORIC FUNGI that is a major cause of SEPTICEMIA and disseminated CANDIDIASIS, especially in patients with LYMPHOMA; LEUKEMIA; and DIABETES MELLITUS. It is also found as part of the normal human mucocutaneous flora.
A broad family of synthetic organosiloxane polymers containing a repeating silicon-oxygen backbone with organic side groups attached via carbon-silicon bonds. Depending on their structure, they are classified as liquids, gels, and elastomers. (From Merck Index, 12th ed)
Proteins which bind calmodulin. They are found in many tissues and have a variety of functions including F-actin cross-linking properties, inhibition of cyclic nucleotide phosphodiesterase and calcium and magnesium ATPases.
The use of computers for designing and/or manufacturing of anything, including drugs, surgical procedures, orthotics, and prosthetics.
Historical term for a chronic, but fluctuating, disorder beginning in early life and characterized by recurrent and multiple somatic complaints not apparently due to physical illness. This diagnosis is not used in contemporary practice.
Encrustations, formed from microbes (bacteria, algae, fungi, plankton, or protozoa) embedding in extracellular polymers, that adhere to surfaces such as teeth (DENTAL DEPOSITS); PROSTHESES AND IMPLANTS; and catheters. Biofilms are prevented from forming by treating surfaces with DENTIFRICES; DISINFECTANTS; ANTI-INFECTIVE AGENTS; and antifouling agents.
Synthetic resins, containing an inert filler, that are widely used in dentistry.
A property of the surface of an object that makes it stick to another surface.
The use of a layer of tooth-colored material, usually porcelain or acrylic resin, applied to the surface of natural teeth, crowns, or pontics by fusion, cementation, or mechanical retention.
Proteins to which calcium ions are bound. They can act as transport proteins, regulator proteins, or activator proteins. They typically contain EF HAND MOTIFS.
Photographic techniques used in ORTHODONTICS; DENTAL ESTHETICS; and patient education.
Water in its gaseous state. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 6th ed)
A temporary or persistent opening in the eardrum (TYMPANIC MEMBRANE). Clinical signs depend on the size, location, and associated pathological condition.
A computer based method of simulating or analyzing the behavior of structures or components.
A clear, odorless, tasteless liquid that is essential for most animal and plant life and is an excellent solvent for many substances. The chemical formula is hydrogen oxide (H2O). (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)
Any technique by which an unknown color is evaluated in terms of standard colors. The technique may be visual, photoelectric, or indirect by means of spectrophotometry. It is used in chemistry and physics. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)
A heat-stable, low-molecular-weight activator protein found mainly in the brain and heart. The binding of calcium ions to this protein allows this protein to bind to cyclic nucleotide phosphodiesterases and to adenyl cyclase with subsequent activation. Thereby this protein modulates cyclic AMP and cyclic GMP levels.
Devices, usually alloplastic, surgically inserted into or onto the jawbone, which support a single prosthetic tooth and serve either as abutments or as cosmetic replacements for missing teeth.
An oxide of aluminum, occurring in nature as various minerals such as bauxite, corundum, etc. It is used as an adsorbent, desiccating agent, and catalyst, and in the manufacture of dental cements and refractories.
The parts of fungi.
Silicone polymers which consist of silicon atoms substituted with methyl groups and linked by oxygen atoms. They comprise a series of biocompatible materials used as liquids, gels or solids; as film for artificial membranes, gels for implants, and liquids for drug vehicles; and as antifoaming agents.
Inanimate objects that become enclosed in the body.
Use for articles concerning dental education in general.
Elements of limited time intervals, contributing to particular results or situations.
The parts of a macromolecule that directly participate in its specific combination with another molecule.
Individuals responsible for fabrication of dental appliances.
The maximum compression a material can withstand without failure. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p427)
The oval-shaped oral cavity located at the apex of the digestive tract and consisting of two parts: the vestibule and the oral cavity proper.
Materials incorporated mechanically in plastics (usually PVC) to increase flexibility, workability or distensibility; due to the non-chemical inclusion, plasticizers leach out from the plastic and are found in body fluids and the general environment.
A calcium salt that is used for a variety of purposes including: building materials, as a desiccant, in dentistry as an impression material, cast, or die, and in medicine for immobilizing casts and as a tablet excipient. It exists in various forms and states of hydration. Plaster of Paris is a mixture of powdered and heat-treated gypsum.
The property of objects that determines the direction of heat flow when they are placed in direct thermal contact. The temperature is the energy of microscopic motions (vibrational and translational) of the particles of atoms.
A test to determine the relative hardness of a metal, mineral, or other material according to one of several scales, such as Brinell, Mohs, Rockwell, Vickers, or Shore. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 6th ed)
Dentifrices that are formulated into a paste form. They typically contain abrasives, HUMECTANTS; DETERGENTS; FLAVORING AGENTS; and CARIOSTATIC AGENTS.
A class of statistical methods applicable to a large set of probability distributions used to test for correlation, location, independence, etc. In most nonparametric statistical tests, the original scores or observations are replaced by another variable containing less information. An important class of nonparametric tests employs the ordinal properties of the data. Another class of tests uses information about whether an observation is above or below some fixed value such as the median, and a third class is based on the frequency of the occurrence of runs in the data. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed, p1284; Corsini, Concise Encyclopedia of Psychology, 1987, p764-5)
Established cell cultures that have the potential to propagate indefinitely.
Electrophoresis in which a polyacrylamide gel is used as the diffusion medium.
One of the eight permanent teeth, two on either side in each jaw, between the canines (CUSPID) and the molars (MOLAR), serving for grinding and crushing food. The upper have two cusps (bicuspid) but the lower have one to three. (Jablonski, Dictionary of Dentistry, 1992, p822)
The internal resistance of a material to moving some parts of it parallel to a fixed plane, in contrast to stretching (TENSILE STRENGTH) or compression (COMPRESSIVE STRENGTH). Ionic crystals are brittle because, when subjected to shear, ions of the same charge are brought next to each other, which causes repulsion.
A statistical technique that isolates and assesses the contributions of categorical independent variables to variation in the mean of a continuous dependent variable.
Physicochemical property of fimbriated (FIMBRIAE, BACTERIAL) and non-fimbriated bacteria of attaching to cells, tissue, and nonbiological surfaces. It is a factor in bacterial colonization and pathogenicity.
Economic aspects of the dental profession and dental care.
A film that attaches to teeth, often causing DENTAL CARIES and GINGIVITIS. It is composed of MUCINS, secreted from salivary glands, and microorganisms.
Usually a written medical and nursing care program designed for a particular patient.
A method of producing a high-quality scan by digitizing and subtracting the images produced by high- and low-energy x-rays.
Preparation of TOOTH surfaces, and of materials bonded to teeth or DENTAL IMPLANTS, with agents and methods which roughen the surface to facilitate adhesion. Agents include phosphoric or other acids (ACID ETCHING, DENTAL) and methods include LASERS.
Bites inflicted by humans.
Material from which the casting mold is made in the fabrication of gold or cobalt-chromium castings. (Boucher's Clinical Dental Terminology, 4th ed, p168)
The bottom portion of the pharynx situated below the OROPHARYNX and posterior to the LARYNX. The hypopharynx communicates with the larynx through the laryngeal inlet, and is also called laryngopharynx.
Physiological functions, activities, and interactions of microorganisms, including ARCHAEA; BACTERIA; RICKETTSIA; VIRUSES; FUNGI; and others.
An ulceration caused by prolonged pressure on the SKIN and TISSUES when one stays in one position for a long period of time, such as lying in bed. The bony areas of the body are the most frequently affected sites which become ischemic (ISCHEMIA) under sustained and constant pressure.
A group of compounds that contain a bivalent O-O group, i.e., the oxygen atoms are univalent. They can either be inorganic or organic in nature. Such compounds release atomic (nascent) oxygen readily. Thus they are strong oxidizing agents and fire hazards when in contact with combustible materials, especially under high-temperature conditions. The chief industrial uses of peroxides are as oxidizing agents, bleaching agents, and initiators of polymerization. (From Hawley's Condensed Chemical Dictionary, 11th ed)
Microscopy in which the object is examined directly by an electron beam scanning the specimen point-by-point. The image is constructed by detecting the products of specimen interactions that are projected above the plane of the sample, such as backscattered electrons. Although SCANNING TRANSMISSION ELECTRON MICROSCOPY also scans the specimen point by point with the electron beam, the image is constructed by detecting the electrons, or their interaction products that are transmitted through the sample plane, so that is a form of TRANSMISSION ELECTRON MICROSCOPY.
Measurable quantity of bacteria in an object, organism, or organism compartment.
The process of generating three-dimensional images by electronic, photographic, or other methods. For example, three-dimensional images can be generated by assembling multiple tomographic images with the aid of a computer, while photographic 3-D images (HOLOGRAPHY) can be made by exposing film to the interference pattern created when two laser light sources shine on an object.
An element of the rare earth family of metals. It has the atomic symbol Y, atomic number 39, and atomic weight 88.91. In conjunction with other rare earths, yttrium is used as a phosphor in television receivers and is a component of the yttrium-aluminum garnet (YAG) lasers.
Substances used on inanimate objects that destroy harmful microorganisms or inhibit their activity. Disinfectants are classed as complete, destroying SPORES as well as vegetative forms of microorganisms, or incomplete, destroying only vegetative forms of the organisms. They are distinguished from ANTISEPTICS, which are local anti-infective agents used on humans and other animals. (From Hawley's Condensed Chemical Dictionary, 11th ed)
The movement of teeth into altered positions in relationship to the basal bone of the ALVEOLAR PROCESS and to adjoining and opposing teeth as a result of loss of approximating or opposing teeth, occlusal interferences, habits, inflammatory and dystrophic disease of the attaching and supporting structures of the teeth. (From Boucher's Clinical Dental Terminology, 4th ed)