Model for inactivation and disposal of infectious human immunodeficiency virus and radioactive waste in a BL3 facility.
(65/111)
A method is described for autoclaving low levels of solid infectious, radioactive waste. The method permits steam penetration to inactivate biologic waste, while any volatile radioactive compounds generated during the autoclave process are absorbed. Inactivation of radiolabeled infectious waste has been problematic because the usual sterilization techniques result in unacceptable radiation handling practices. If autoclaved under the usual conditions, there exists a high probability of volatilization or release of radioisotopes from the waste. This results in the radioactive contamination of the autoclave and the laboratory area where steam is released from the autoclave. Our results provide a practical method to inactivate and dispose of infectious radioactive waste. For our research, Bacillus pumilus spore strips and vaccinia virus were used as more heat-resistant surrogates of the human immunodeficiency virus (HIV). These surrogates were used because HIV is difficult to grow under most conditions and is less heat tolerant than the surrogates. In addition, B. pumilus has defined cell death values, whereas such values have not been established for HIV. Both B. pumilus and vaccinia virus are less hazardous to work with. The autoclave method is time efficient and can be performed by laboratory personnel with minimal handling of the waste. Furthermore, waste site handlers are able to visually inspect the solid waste containers and ascertain that inactivation procedures have been implemented. (+info)
Changes in the material characteristics of maize straw during the pretreatment process of methanation.
(66/111)
Sodium aluminate as catalyst for transesterification of waste mutton fat.
(67/111)
Sodium aluminate and its calcinied forms have been evaluated as basic catalysts for the transesterification of waste mutton fat with methanol. The decrease in catalytic activity has been observed with calcinied sodium alumiate. Fat and methanol in 1:29 molar ratio with 1.5 wt.% of sodium aluminate under reflux resulted in 97 % conversion to biodiesel in 1h 20 min. The reaction showed tolerance of additional moisture content of 1 wt.%. (+info)
Soil properties, nutrient dynamics, and soil enzyme activities associated with garlic stalk decomposition under various conditions.
(68/111)
Production of hydrogen and volatile fatty acid by Enterobacter sp. T4384 using organic waste materials.
(69/111)
In a study of hydrogen-producing bacteria, strain T4384 was isolated from rice field samples in the Republic of Korea. The isolate was identified as Enterobacter sp. T4384 by phylogenetic analysis of 16S rRNA and rpoB gene sequences. Enterobacter sp. T4384 grew at a temperature range of 10-45 degrees C and at an initial pH range of 4.5-9.5. Strain T4384 produced hydrogen at 0-6% NaCl by using glucose, fructose, and mannose. In serum bottle cultures using a complete medium, Enterobacter sp. T4384 produced 1,098 ml/l H2, 4.0 g/l ethanol, and 1.0 g/l acetic acid. In a pH-regulated jar fermenter culture with the biogas removed, 2,202 ml/l H2, 6.2 g/l ethanol, and 1.0 g/l acetic acid were produced, and the lag-phase time was 4.8 h. Strain T4384 metabolized the hydrolysate of organic waste for the production of hydrogen and volatile fatty acid. The strain T4384 produced 947 ml/l H2, 3.2 g/l ethanol, and 0.2 g/l acetic acid from 6% (w/v) food waste hydrolysate; 738 ml/l H2, 4.2 g/l ethanol, and 0.8 g/l acetic acid from Miscanthus sinensis hydrolysate; and 805 ml/l H2, 5.0 g/l ethanol, and 0.7 g/l acetic acid from Sorghum bicolor hydrolysate. (+info)
Chondroitin sulfate, hyaluronic acid and chitin/chitosan production using marine waste sources: characteristics, applications and eco-friendly processes: a review.
(70/111)