Multispectral imaging of clinically relevant cellular targets in tonsil and lymphoid tissue using semiconductor quantum dots.
(73/426)
Determination of the expression and spatial distribution of molecular epitopes, or antigens, in patient tissue specimens has substantially improved the pathologist's ability to classify disease processes. Certain disease pathophysiologies are marked by characteristic increased or decreased expression of developmentally controlled antigens, defined as Cluster of Differentiation markers, that currently form the foundation for understanding lymphoid malignancies. While chromogens and organic fluorophores have been utilitized for some time in immunohistochemical analyses, developments in synthetic, inorganic fluorophore semiconductors, namely quantum dots, offer a versatile alternative reporter system. Quantum dots are stable fluorophores, are resistant to photobleaching, and are attributed with wide excitation ranges and narrow emission spectra. To date, routinely processed, formalin-fixed tissues have only been probed with two quantum dot reporters simultaneously. In the present study, streptavidin-conjugated quantum dots with distinct emission spectra were tested for their utility in identifying a variety of differentially expressed antigens (surface, cytoplasmic, and nuclear). Slides were analyzed using confocal laser scanning microscopy, which enabled with a single excitation wavelength (488 nm argon laser) the detection of up to seven signals (streptavidin-conjugated quantum dots 525, 565, 585, 605, 655, 705 and 805 nm) plus the detection of 4'6-DiAmidino-2-PhenylIndole with an infra-red laser tuned to 760 nm for two photon excitation. Each of these signals was specific for the intended morphologic immunohistochemical target. In addition, five of the seven streptavidin-conjugated quantum dots tested (not streptavidin-conjugated quantum dots 585 or 805 nm) were used on the same tissue section and could be analyzed simultaneously on routinely processed formalin-fixed, paraffin-embedded sections. Application of this multiplexing method will enable investigators to explore the clinically relevant multidimensional cellular interactions that underlie diseases, simultaneously. (+info)
Speciation of arsenic compounds in urine from occupationally unexposed and exposed persons in the U.K. using a routine LC-ICP-MS method.
(74/426)
This paper describes a routine, robust, and reproducible liquid chromatography-inductively coupled plasma-mass spectrometry (LC-ICP-MS) speciation method for five arsenic compounds [arsenobetaine (AB), arsenite, arsenate, monomethylarsonic acid (MMA), and dimethylarsinic acid (DMA)] in urine. Concentrations of these arsenic species in urine samples are reported in two sets of non-occupationally exposed controls with one set having consumed fish within 24 h (n = 31) and the other not having consumed fish for 48 h (n = 34). Arsenic species in urine samples from workers in both the timber treatment industry (n = 49) and semiconductor industry (n = 46) are also reported. The arsenic content in all of the samples was also determined using hydride-generation coupled with ICP-MS. The results show that urine samples from people not occupationally exposed to arsenic contain low levels of DMA, MMA, and AB and that only urine from smokers contained any inorganic arsenic. Consumption of seafood was seen to significantly increase the levels of AB and DMA in the unexposed persons. Urine samples from the semiconductor workers exhibited significantly higher levels of arsenite, arsenate, and DMA than the unexposed samples. The urine samples from timber treatment workers exhibited significantly higher levels of four arsenic species (not AB) than those observed in both the control groups and the semi-conductor workers. (+info)
Cancer incidence among semiconductor and electronic storage device workers.
(75/426)
AIMS: To evaluate cancer incidence among workers at two facilities in the USA that made semiconductors and electronic storage devices. METHODS: 89 054 men and women employed by International Business Machines (IBM) were included in the study. We compared employees' incidence rates with general population rates and examined incidence patterns by facility, duration of employment, time since first employment, manufacturing era, potential for exposure to workplace environments other than offices and work activity. RESULTS: For employees at the semiconductor manufacturing facility, the standardised incidence ratio (SIR) for all cancers combined was 81 (1541 observed cases, 95% confidence interval (CI) 77 to 85) and for those at the storage device manufacturing facility the SIR was 87 (1319 observed cases, 95% CI 82 to 92). The subgroups of employees with > or =15 years since hiring and > or =5 years worked had 6-16% fewer total incidents than expected. SIRs were increased for several cancers in certain employee subgroups, but analyses of incidence patterns by potential exposure and by years spent and time since starting in specific work activities did not clearly indicate that the excesses were due to occupational exposure. CONCLUSIONS: This study did not provide strong or consistent evidence of causal associations with employment factors. Data on employees with long potential induction time and many years worked were limited. Further follow-up will allow a more informative analysis of cancer incidence that might be plausibly related to workplace exposures in the cohort. (+info)
A non-oxidative approach toward chemically and electrochemically functionalizing Si(111).
(76/426)
A general method for the non-oxidative functionalization of single-crystal silicon(111) surfaces is described. The silicon surface is fully acetylenylated using two-step chlorination/alkylation chemistry. A benzoquinone-masked primary amine is attached to this surface via Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition ("click" chemistry). The benzoquinone is electrochemically reduced, resulting in quantitative cleavage of the molecule and exposing the amine terminus. Molecules presenting a carboxylic acid have been immobilized to the exposed amine sites. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV), and contact angle goniometry were utilized to characterize and quantitate each step in the functionalization process. This work represents a strategy for providing a general platform that can incorporate organic and biological molecules on Si(111) with minimal oxidation of the silicon surface. (+info)
A mechanism to signal receptor-substrate interactions with luminescent quantum dots.
(77/426)
Semiconductor quantum dots are becoming valuable analytical tools for biomedical applications. Indeed, their unique photophysical properties offer the opportunity to design luminescent probes for imaging and sensing with unprecedented performance. In this context, we have identified operating principles to transduce the supramolecular association of complementary receptor-substrate pairs into an enhancement in the luminescence of sensitive quantum dots. Our mechanism is based on the electrostatic adsorption of cationic quenchers on the surface of anionic quantum dots. The adsorbed quenchers suppress efficiently the emission character of the associated nanoparticles on the basis of photoinduced electron transfer. In the presence of target receptors able to bind the quenchers and prevent electron transfer, however, the luminescence of the quantum dots is restored. Thus, complementary receptor-substrate pairs can be identified with luminescence measurements relying on our design logic. In fact, we have demonstrated with a representative example that our protocol can be adapted to signal protein-ligand interactions. (+info)
Reducing, by pulse width modulation, the curing temperature of a prototype high-power LED light curing unit.
(78/426)
Third-generation LEDs have high irradiance and efficiency, but the associated temperature rise is potentially hazardous to the pulp of teeth. We evaluated, during composite polymerization, the irradiance and temperature rise of a prototype high-power LED light curing unit (LCU) with optimal pulse width modulation (PWM), and then compared the results with four off-the-shelf high-power LCUs. A cavity was prepared in a tooth, and a composite resin layer was applied and cured. For each LCU, the irradiance and temperature changes at the pulp-dentin junction were measured. Microhardness (Vickers hardness) of cured composite samples was measured for each LCU. Our prototype had a final temperature of 36.4 +/- 1.3 degrees C and irradiance of 1,182 +/- 1 mW/cm2. The unit with the highest temperature had a temperature of 48.7 +/- 1.2 degrees C and an irradiance of 1,194 +/- 1 mW/cm2. Based on the results of the present study, it was shown that PWM technology reduced the curing temperature while retaining the polymerization effectiveness of a high-power LED LCU. (+info)
The mechanism of extracellular stimulation of nerve cells on an electrolyte-oxide-semiconductor capacitor.
(79/426)
Extracellular excitation of neurons is applied in studies of cultured networks and brain tissue, as well as in neuroprosthetics. We elucidate its mechanism in an electrophysiological approach by comparing voltage-clamp and current-clamp recordings of individual neurons on an insulated planar electrode. Noninvasive stimulation of neurons from pedal ganglia of Lymnaea stagnalis is achieved by defined voltage ramps applied to an electrolyte/HfO2/silicon capacitor. Effects on the smaller attached cell membrane and the larger free membrane are distinguished in a two-domain-stimulation model. Under current-clamp, we study the polarization that is induced for closed ion channels. Under voltage-clamp, we determine the capacitive gating of ion channels in the attached membrane by falling voltage ramps and for comparison also the gating of all channels by conventional variation of the intracellular voltage. Neuronal excitation is elicited under current-clamp by two mechanisms: Rising voltage ramps depolarize the free membrane such that an action potential is triggered. Falling voltage ramps depolarize the attached membrane such that local ion currents are activated that depolarize the free membrane and trigger an action potential. The electrophysiological analysis of extracellular stimulation in the simple model system is a basis for its systematic optimization in neuronal networks and brain tissue. (+info)
Semiconductor quantum rods as single molecule fluorescent biological labels.
(80/426)
In this paper, we report the development of rod-shaped semiconductor nanocrystals (quantum rods) as fluorescent biological labels. Water-soluble biocompatible quantum rods have been prepared by surface silanization and applied for nonspecific cell tracking as well as specific cellular targeting. Quantum rods are brighter single molecule probes as compared to quantum dots. They have many potential applications as biological labels in situations where their properties offer advantages over quantum dots. (+info)