Three-dimensionally ordered array of air bubbles in a polymer film.
(25/1668)
We report the formation of a three-dimensionally ordered array of air bubbles of monodisperse pore size in a polymer film through a templating mechanism based on thermocapillary convection. Dilute solutions of a simple, coil-like polymer in a volatile solvent are cast on a glass slide in the presence of moist air flowing across the surface. Evaporative cooling and the generation of an ordered array of breath figures leads to the formation of multilayers of hexagonally packed water droplets that are preserved in the final, solid polymer film as spherical air bubbles. The dimensions of these bubbles can be controlled simply by changing the velocity of the airflow across the surface. When these three-dimensionally ordered macroporous materials have pore dimensions comparable to the wavelength of visible light, they are of interest as photonic band gaps and optical stop-bands. (+info)
Desorption/ionization on silicon (DIOS): a diverse mass spectrometry platform for protein characterization.
(26/1668)
Since the advent of matrix-assisted laser desorption/ionization and electrospray ionization, mass spectrometry has played an increasingly important role in protein functional characterization, identification, and structural analysis. Expanding this role, desorption/ionization on silicon (DIOS) is a new approach that allows for the analysis of proteins and related small molecules. Despite the absence of matrix, DIOS-MS yields little or no fragmentation and is relatively tolerant of moderate amounts of contaminants commonly found in biological samples. Here, functional assays were performed on an esterase, a glycosidase, a lipase, as well as exo- and endoproteases by using enzyme-specific substrates. Enzyme activity also was monitored in the presence of inhibitors, successfully demonstrating the ability of DIOS to be used as an inhibitor screen. Because DIOS is a matrix-free desorption technique, it also can be used as a platform for multiple analyses to be performed on the same protein. This unique advantage was demonstrated with acetylcholine esterase for qualitative and quantitative characterization and also by its subsequent identification directly from the DIOS platform. (+info)
Characterization of UV-irradiated dense/porous collagen membranes: morphology, enzymatic degradation, and mechanical properties.
(27/1668)
Collagen-based membranous materials of various shapes (gel, film, sponge) are known to be the most promising materials in terms of facilitating the regeneration of dermal defects. In this study, dense and porous collagen membranes were fabricated using air-drying and freeze-drying processes, respectively, and the effect of ultraviolet (UV) radiation on the degree of membrane crosslinking was evaluated by in vitro biodegradation and mechanical testing. A non-irradiated membrane group was used as the negative control and a glutaraldehyde (GA) treated group as the positive control. Scanning electron microscopy showed that, as the freezing temperature decreased to -196 degrees C, the resultant mean pore sizes also decreased; optimal pore size was obtained at a freezing temperature of -70 degrees C. In vitro biodegradation and mechanical testing demonstrated that GA treatment or 4 hours of exposure to UV radiation significantly increased both resistance to collagenase and mechanical strength versus the untreated controls, regardless of the collagen membrane type (dense or porous). Our results suggest that UV treatment is a useful tool for the fabrication of collagen membranes designed to be used as dermal dressings. (+info)
Protecting against water loss: analysis of the barrier properties of plant cuticles.
(28/1668)
The cuticle is the major barrier against uncontrolled water loss from leaves, fruits and other primary parts of higher plants. More than 100 mean values for water permeabilities determined with isolated leaf and fruit cuticles from 61 plant species are compiled and discussed in relation to plant organ, natural habitat and morphology. The maximum barrier properties of plant cuticles exceed that of synthetic polymeric films of equal thickness. Cuticular water permeability is not correlated to the thickness of the cuticle or to wax coverage. Relationships between cuticular permeability, wax composition and physical properties of the cuticle are evaluated. Cuticular permeability to water increases on the average by a factor of 2 when leaf surface temperature is raised from 15 degrees C to 35 degrees C. Organic compounds of anthropogenic and biogenic origin may enhance cuticular permeability. The pathway taken by water across the cuticular transport barrier is reviewed. The conclusion from this discussion is that the bulk of water diffuses as single molecules across a lipophilic barrier while a minor fraction travels along polar pores. Open questions concerning the mechanistic understanding of the plant cuticular transport barrier and the role the plant cuticle plays in ensuring the survival and reproductive success of an individual plant are indicated. (+info)
Transport properties of alveolar epithelium measured by molecular hetastarch absorption in isolated rat lungs.
(29/1668)
To evaluate the transport properties of the alveolar epithelium, we instilled hetastarch (Het; 6%, 10 ml, 1 - 1 x 10(4) kDa) into the trachea of isolated rat lungs and then measured the molecular distribution of Het that entered the lung perfusate from the air space over 6 h. Het transport was driven by either diffusion or an oncotic gradient. Perfusate Het had a unique, bimodal molecular weight distribution, consisting of a narrow low-molecular-weight peak at 10-15 kDa (range, 5-46 kDa) and a broad high-molecular-weight band (range 46-2,000 kDa; highest at 288 kDa). We modeled the low-molecular-weight transport as (passive) restricted diffusion or osmotic flow through a small-pore system and the high-molecular-weight transport as passive transport through a large-pore system. The equivalent small-pore radius was 5.0 nm, with a distribution of 150 pores per alveolus. The equivalent large-pore radius was 17.0 nm, with a distribution of one pore per seven alveoli. The small-pore fluid conductivity (2 x 10(-5) ml. h(-1). cm(-2). mmHg(-1)) was 10-fold larger than that of the large-pore conductivity. (+info)
Influence of the degree of polymerization on the behavior of cellulose during homogenization and extrusion/spheronization.
(30/1668)
The study objective was to investigate the influence of the degree of polymerization (DP) of cellulose materials (microcrystalline cellulose [MCC] and powder cellulose [PC]) on the behavior of these materials during homogenization and extrusion/spheronization processes. Suspensions of the cellulose types with different DP values were homogenized using a high-pressure homogenizer. The particle size, agglomeration index, and apparent viscosity of these suspensions was determined at different times after pouring. Additionally, these different cellulose types were processed into pellets using the extrusion/spheronization method, and the water content and power consumption as a function of the DP were determined. Cellulose types with a high DP value showed greater particle size after homogenization than the types with a low DP value. In contrast, no relevant relationship between the apparent viscosity and DP could be observed. During the extrusion process, water content in the extrudate and pellet porosity were increased as the DP was increased for the extrudates produced at the same level of power consumption. MCC types with various DPs compared with PC provided a novel way of understanding the role of cellulose in the extrusion process. The DP showed a remarkable influence on the physicochemical properties of the cellulose materials and, consequently, on the behavior of these materials during the extrusion/spheronization process. It is postulated that the sponge model is more appropriate for the cellulose type with high DP (PC), whereas the gel model is more applicable to cellulose types with lower DP (MCC). (+info)
Super-osteons (remodeling clusters) in the cortex of the femoral shaft: influence of age and gender.
(31/1668)
Previous studies of cortical remodeling in the fractured femoral neck indicated that the merging of spatially clustered remodeling osteons could result in the formation of deleteriously large cavities associated with femoral neck fracture. This study aimed to identify whether remodeling osteons in the femoral shaft were also clustered and to assess the influence of age and gender. Microradiographic images of femoral mid-shaft cross-sections from 66 subjects over 21 years of age were analyzed to determine the number, size and location of all Haversian canals. Those most recently remodeled were identified using an edge-detection algorithm highlighting the most marked differential gradients in grey levels. Cluster analysis (JMP software) of these osteons identified the proportion of recently remodeled osteons that were within 0.75 mm clusters. As in the femoral neck, remodeling osteons were significantly more clustered than could occur by chance (real, 59.4%; random, 39.4%; P < 0.0001). The density of these clusters (number/mm(2)) was not significantly associated with subject age or gender but was greatest near the periosteum and decreased toward the marrow cavity (periosteal 0.043 +/- 0.004; mid-cortex 0.028 +/- 0.003; endosteal 0.017 +/- 0.002). Cortical porosity increased with age. The presence of giant canals (diameter >385 microm) was inversely related to the presence of clusters (R(2) = 0.237, P < 0.0001). This data suggest that remodeling osteons tend to be spatially colocalized in the shaft as they are in the neck of the femur and their presence is independent of age or gender. We propose that these remodeling clusters be termed super-osteons. The negative relationship between super-osteons and giant canals raises the intriguing possibility that loss of the control of remodeling depth results in the merging of osteonal systems to form deleteriously large cortical cavities with a marked reduction in bone strength. (+info)
Initial evaluation of a ceramic form as a reconstructive material for bone defects.
(32/1668)
Alumina form and a porous apatite, apaceram, were implanted in rat tibiae bone defects for up to 12 weeks and the tissue response was studied histologically as an initial evaluation of whether or not this ceramic form had potential as a reconstructive material for bone defects. We observed no bone formation inside the pores of porous apatite, even after 12 weeks, if the pores were deeper than 1.0 mm from the surface. In contrast, we observed bone tissue deep inside the alumina form as early as 2 weeks after implantation. However, the bone that formed around the alumina form did not directly contact with the frame of the alumina form, even though bone directly contacted with porous apatite. We concluded, therefore, that the ceramic form has potential value as a reconstructive material for bone defects. This potential value would be further increased if the ceramic form could be prepared with calcium phosphate-related materials. (+info)