A matrix solid-phase dispersion method for the extraction of seven pesticides from mango and papaya.
(34/46)
A simple and effective extraction method based on matrix solid-phase dispersion was developed to determine trichlorfon, pyrimethanil, methyl parathion, tetraconazole, thiabendazole, imazalil, and tebuconazole in papaya and mango using gas chromatography-mass spectrometry with selected ion monitoring. Different parameters of the method were evaluated, such as type of solid-phase (silica-gel, neutral alumina, and Florisil), the amount of solid-phase, and eluent [dichloromethane, ethyl acetate-dichloromethane (4:1, 1:4, 1:1, 2:3, v/v)]. The best results were obtained using 2.0 g of mango or papaya, 3.0 g of silica as dispersant sorbent, and ethyl acetate-dichloromethane (1:1, v/v) as eluting solvent. The method was validated using mango and papaya samples fortified with pesticides at different concentration levels (0.05, 0.10, and 1.0 mg/kg). Average recoveries (4 replicates) ranged from 80% to 146%, with relative standard deviations between 1.0% and 28%. Detection and quantification limits for mango and papaya ranged from 0.01 to 0.03 mg/kg and 0.05 to 0.10 mg/kg, respectively. The proposed method was applied to the analysis of these compounds in commercial fruit samples from a local market (Aracaju/SE, Brazil), and residues of the pesticides were not detected on the samples. (+info)
Involvement of oxidative stress in methyl parathion and parathion-induced toxicity and genotoxicity to human liver carcinoma (HepG(2)) cells.
(35/46)
Enhanced electrochemiluminescence employed for the selective detection of methyl parathion based on a zirconia nanoparticle film modified electrode.
(39/46)
A simple, rapid and sensitive electrochemiluminescence (ECL) sensor was proposed for direct measurements of methyl parathion (MP) based on the strong affinity of a nano zirconia particles (ZrO(2) NPs) modified film on the electrode to the phosphoric group. ZrO(2) NPs, which could provide a larger absorption area to immobilize organophosphorus, was firstly modified on the glassy carbon electrode surface to prepare the proposed ECL sensor (ZrO(2)/GC). Subsequently, the ZrO(2)/GC electrode was scanned from -0.8 to +0.6 V to obtain the background signal at 0.44 V in a luminol/KCl solution. Then, a certain concentration of MP was added to an aqueous solution for 240 s, which was absorbed onto the ZrO(2)/GC electrode surface. Moreover, the MP absorbed on the surface of the ZrO(2)/GC electrode enhanced the ECL signal of luminol in the luminol/KCl solution, which increased with the concentration of MP. As a result, a novel ECL sensor was obtained in a luminol/KCl solution. The MP was determined in the range of from 3.8 x 10(-11) to 3.8 x 10(-6) mol L(-1), with a low detection limit of 1.27 x 10(-11) mol L(-1) (S/N = 3). The proposed ECL sensor performance for MP detection will open a new field in the application of rapid and screen detection of ultra-trace amounts of organ phosphorus pesticides (OPs) of vegetables used in farm markets. (+info)
Development of a novel optical biosensor for detection of organophosphorus pesticides based on methyl parathion hydrolase immobilized by metal-chelate affinity.
(40/46)
We have developed a novel optical biosensor device using recombinant methyl parathion hydrolase (MPH) enzyme immobilized on agarose by metal-chelate affinity to detect organophosphorus (OP) compounds with a nitrophenyl group. The biosensor principle is based on the optical measurement of the product of OP catalysis by MPH (p-nitrophenol). Briefly, MPH containing six sequential histidines (6 x His tag) at its N-terminal was bound to nitrilotriacetic acid (NTA) agarose with Ni ions, resulting in the flexible immobilization of the bio-reaction platform. The optical biosensing system consisted of two light-emitting diodes (LEDs) and one photodiode. The LED that emitted light at the wavelength of the maximum absorption for p-nitrophenol served as the signal light, while the other LED that showed no absorbance served as the reference light. The optical sensing system detected absorbance that was linearly correlated to methyl parathion (MP) concentration and the detection limit was estimated to be 4 muM. Sensor hysteresis was investigated and the results showed that at lower concentration range of MP the difference got from the opposite process curves was very small. With its easy immobilization of enzymes and simple design in structure, the system has the potential for development into a practical portable detector for field applications. (+info)