Stainless Steel: Stainless steel. A steel containing Ni, Cr, or both. It does not tarnish on exposure and is used in corrosive environments. (Grant & Hack's Chemical Dictionary, 5th ed)Steel: A tough, malleable, iron-based alloy containing up to, but no more than, two percent carbon and often other metals. It is used in medicine and dentistry in implants and instrumentation.WeldingDental Alloys: A mixture of metallic elements or compounds with other metallic or metalloid elements in varying proportions for use in restorative or prosthetic dentistry.Orthodontic Wires: Wires of various dimensions and grades made of stainless steel or precious metal. They are used in orthodontic treatment.Corrosion: The gradual destruction of a metal or alloy due to oxidation or action of a chemical agent. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 6th ed)Friction: Surface resistance to the relative motion of one body against the rubbing, sliding, rolling, or flowing of another with which it is in contact.Titanium: A dark-gray, metallic element of widespread distribution but occurring in small amounts; atomic number, 22; atomic weight, 47.90; symbol, Ti; specific gravity, 4.5; used for fixation of fractures. (Dorland, 28th ed)Orthodontic Brackets: Small metal or ceramic attachments used to fasten an arch wire. These attachments are soldered or welded to an orthodontic band or cemented directly onto the teeth. Bowles brackets, edgewise brackets, multiphase brackets, ribbon arch brackets, twin-wire brackets, and universal brackets are all types of orthodontic brackets.Materials Testing: The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility.Alloys: A mixture of metallic elements or compounds with other metallic or metalloid elements in varying proportions.Chromium: A trace element that plays a role in glucose metabolism. It has the atomic symbol Cr, atomic number 24, and atomic weight 52. According to the Fourth Annual Report on Carcinogens (NTP85-002,1985), chromium and some of its compounds have been listed as known carcinogens.Nickel: A trace element with the atomic symbol Ni, atomic number 28, and atomic weight 58.69. It is a cofactor of the enzyme UREASE.Dental Stress Analysis: The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures.Orthodontic Appliance Design: The planning, calculation, and creation of an apparatus for the purpose of correcting the placement or straightening of teeth.Dental Prosthesis Retention: Holding a DENTAL PROSTHESIS in place by its design, or by the use of additional devices or adhesives.Surface Properties: Characteristics or attributes of the outer boundaries of objects, including molecules.Crowns: A prosthetic restoration that reproduces the entire surface anatomy of the visible natural crown of a tooth. It may be partial (covering three or more surfaces of a tooth) or complete (covering all surfaces). It is made of gold or other metal, porcelain, or resin.Equipment Reuse: Further or repeated use of equipment, instruments, devices, or materials. It includes additional use regardless of the original intent of the producer as to disposability or durability. It does not include the repeated use of fluids or solutions.Chromium Alloys: Specific alloys not less than 85% chromium and nickel or cobalt, with traces of either nickel or cobalt, molybdenum, and other substances. They are used in partial dentures, orthopedic implants, etc.Elastomers: A generic term for all substances having the properties of stretching under tension, high tensile strength, retracting rapidly, and recovering their original dimensions fully. They are generally POLYMERS.Disinfectants: Substances used on inanimate objects that destroy harmful microorganisms or inhibit their activity. Disinfectants are classed as complete, destroying SPORES as well as vegetative forms of microorganisms, or incomplete, destroying only vegetative forms of the organisms. They are distinguished from ANTISEPTICS, which are local anti-infective agents used on humans and other animals. (From Hawley's Condensed Chemical Dictionary, 11th ed)Tooth Movement: Orthodontic techniques used to correct the malposition of a single tooth.Dental Bonding: An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing.Gold Alloys: Alloys that contain a high percentage of gold. They are used in restorative or prosthetic dentistry.Dental Soldering: The joining of pieces of metal through the use of an alloy which has a lower melting point, usually at least 100 degrees Celsius below the fusion temperature of the parts being soldered. In dentistry, soldering is used for joining components of a dental appliance, as in assembling a bridge, joining metals to orthodontic bands, or adding to the bulk of certain structures, such as the establishment of proper contact areas on inlays and crowns with adjacent teeth. (Illustrated Dictionary of Dentistry, 1982)Metallurgy: The science, art, or technology dealing with processes involved in the separation of metals from their ores, the technique of making or compounding the alloys, the techniques of working or heat-treating metals, and the mining of metals. It includes industrial metallurgy as well as metallurgical techniques employed in the preparation and working of metals used in dentistry, with special reference to orthodontic and prosthodontic appliances. (From Jablonski, Dictionary of Dentistry, 1992, p494)Resin Cements: Dental cements composed either of polymethyl methacrylate or dimethacrylate, produced by mixing an acrylic monomer liquid with acrylic polymers and mineral fillers. The cement is insoluble in water and is thus resistant to fluids in the mouth, but is also irritating to the dental pulp. It is used chiefly as a luting agent for fabricated and temporary restorations. (Jablonski's Dictionary of Dentistry, 1992, p159)Coated Materials, Biocompatible: Biocompatible materials usually used in dental and bone implants that enhance biologic fixation, thereby increasing the bond strength between the coated material and bone, and minimize possible biological effects that may result from the implant itself.Niobium: Niobium. A metal element atomic number 41, atomic weight 92.906, symbol Nb. (From Dorland, 28th ed)Denture Retention: The retention of a denture in place by design, device, or adhesion.Ceramics: Products made by baking or firing nonmetallic minerals (clay and similar materials). In making dental restorations or parts of restorations the material is fused porcelain. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed & Boucher's Clinical Dental Terminology, 4th ed)Polycarboxylate Cement: Water-soluble low-molecular-weight polymers of acrylic or methacrylic acid that form solid, insoluble products when mixed with specially prepared ZnO powder. The resulting cement adheres to dental enamel and is also used as a luting agent.Cooking and Eating UtensilsDental Cements: Substances used to bond COMPOSITE RESINS to DENTAL ENAMEL and DENTIN. These bonding or luting agents are used in restorative dentistry, ROOT CANAL THERAPY; PROSTHODONTICS; and ORTHODONTICS.Saliva, Artificial: A solution used for irrigating the mouth in xerostomia and as a substitute for saliva.Decontamination: The removal of contaminating material, such as radioactive materials, biological materials, or CHEMICAL WARFARE AGENTS, from a person or object.Equipment Design: Methods of creating machines and devices.Spectrometry, X-Ray Emission: The spectrometric analysis of fluorescent X-RAYS, i.e. X-rays emitted after bombarding matter with high energy particles such as PROTONS; ELECTRONS; or higher energy X-rays. Identification of ELEMENTS by this technique is based on the specific type of X-rays that are emitted which are characteristic of the specific elements in the material being analyzed. The characteristic X-rays are distinguished and/or quantified by either wavelength dispersive or energy dispersive methods.Tooth, Deciduous: The teeth of the first dentition, which are shed and replaced by the permanent teeth.Microscopy, Electron, Scanning: Microscopy in which the object is examined directly by an electron beam scanning the specimen point-by-point. The image is constructed by detecting the products of specimen interactions that are projected above the plane of the sample, such as backscattered electrons. Although SCANNING TRANSMISSION ELECTRON MICROSCOPY also scans the specimen point by point with the electron beam, the image is constructed by detecting the electrons, or their interaction products that are transmitted through the sample plane, so that is a form of TRANSMISSION ELECTRON MICROSCOPY.Glass Ionomer Cements: A polymer obtained by reacting polyacrylic acid with a special anion-leachable glass (alumino-silicate). The resulting cement is more durable and tougher than others in that the materials comprising the polymer backbone do not leach out.Biofilms: Encrustations, formed from microbes (bacteria, algae, fungi, plankton, or protozoa) embedding in extracellular polymers, that adhere to surfaces such as teeth (DENTAL DEPOSITS); PROSTHESES AND IMPLANTS; and catheters. Biofilms are prevented from forming by treating surfaces with DENTIFRICES; DISINFECTANTS; ANTI-INFECTIVE AGENTS; and antifouling agents.Dental Debonding: Techniques used for removal of bonded orthodontic appliances, restorations, or fixed dentures from teeth.Tensile Strength: The maximum stress a material subjected to a stretching load can withstand without tearing. (McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p2001)Adhesives: Substances that cause the adherence of two surfaces. They include glues (properly collagen-derived adhesives), mucilages, sticky pastes, gums, resins, or latex.Disinfection: Rendering pathogens harmless through the use of heat, antiseptics, antibacterial agents, etc.Shear Strength: The internal resistance of a material to moving some parts of it parallel to a fixed plane, in contrast to stretching (TENSILE STRENGTH) or compression (COMPRESSIVE STRENGTH). Ionic crystals are brittle because, when subjected to shear, ions of the same charge are brought next to each other, which causes repulsion.Peracetic Acid: A liquid that functions as a strong oxidizing agent. It has an acrid odor and is used as a disinfectant.Dental Etching: Preparation of TOOTH surfaces, and of materials bonded to teeth or DENTAL IMPLANTS, with agents and methods which roughen the surface to facilitate adhesion. Agents include phosphoric or other acids (ACID ETCHING, DENTAL) and methods include LASERS.Diamond: Diamond. A crystalline form of carbon that occurs as hard, colorless or tinted isomeric crystals. It is used as a precious stone, for cutting glass, and as bearings for delicate mechanisms. (From Grant & Hackh's Chemical Dictionary, 5th ed)Molar: The most posterior teeth on either side of the jaw, totaling eight in the deciduous dentition (2 on each side, upper and lower), and usually 12 in the permanent dentition (three on each side, upper and lower). They are grinding teeth, having large crowns and broad chewing surfaces. (Jablonski, Dictionary of Dentistry, 1992, p821)Equipment Contamination: The presence of an infectious agent on instruments, prostheses, or other inanimate articles.Bicuspid: One of the eight permanent teeth, two on either side in each jaw, between the canines (CUSPID) and the molars (MOLAR), serving for grinding and crushing food. The upper have two cusps (bicuspid) but the lower have one to three. (Jablonski, Dictionary of Dentistry, 1992, p822)Orthodontic Appliances: Devices used for influencing tooth position. Orthodontic appliances may be classified as fixed or removable, active or retaining, and intraoral or extraoral. (Boucher's Clinical Dental Terminology, 4th ed, p19)Chromium Compounds: Inorganic compounds that contain chromium as an integral part of the molecule.Zinc Phosphate Cement: A material used for cementation of inlays, crowns, bridges, and orthodontic appliances and occasionally as a temporary restoration. It is prepared by mixing zinc oxide and magnesium oxide powders with a liquid consisting principally of phosphoric acid, water, and buffers. (From Bouchers' Clinical Dental Terminology, 3d ed)Surgical Instruments: Hand-held tools or implements used by health professionals for the performance of surgical tasks.Magnetics: The study of MAGNETIC PHENOMENA.Tooth Preparation, Prosthodontic: The selected form given to a natural tooth when it is reduced by instrumentation to receive a prosthesis (e.g., artificial crown or a retainer for a fixed or removable prosthesis). The selection of the form is guided by clinical circumstances and physical properties of the materials that make up the prosthesis. (Boucher's Clinical Dental Terminology, 4th ed, p239)Bone Wires: Steel wires, often threaded through the skin, soft tissues, and bone, used to fix broken bones. Kirschner wires or apparatus also includes the application of traction to the healing bones through the wires.Stress, Mechanical: A purely physical condition which exists within any material because of strain or deformation by external forces or by non-uniform thermal expansion; expressed quantitatively in units of force per unit area.Sodium Hypochlorite: It is used as an oxidizing and bleaching agent and as a disinfectant. (From Grant & Hackh's Chemical Dictionary, 5th ed)Composite Resins: Synthetic resins, containing an inert filler, that are widely used in dentistry.Air Pollutants, Occupational: Air pollutants found in the work area. They are usually produced by the specific nature of the occupation.Root Canal Preparation: Preparatory activities in ROOT CANAL THERAPY by partial or complete extirpation of diseased pulp, cleaning and sterilization of the empty canal, enlarging and shaping the canal to receive the sealing material. The cavity may be prepared by mechanical, sonic, chemical, or other means. (From Dorland, 28th ed, p1700)Pliability: The quality or state of being able to be bent or creased repeatedly. (From Webster, 3d ed)Tooth, Nonvital: A tooth from which the dental pulp has been removed or is necrotic. (Boucher, Clinical Dental Terminology, 4th ed)Prostheses and Implants: Artificial substitutes for body parts, and materials inserted into tissue for functional, cosmetic, or therapeutic purposes. Prostheses can be functional, as in the case of artificial arms and legs, or cosmetic, as in the case of an artificial eye. Implants, all surgically inserted or grafted into the body, tend to be used therapeutically. IMPLANTS, EXPERIMENTAL is available for those used experimentally.Cementation: The joining of objects by means of a cement (e.g., in fracture fixation, such as in hip arthroplasty for joining of the acetabular component to the femoral component). In dentistry, it is used for the process of attaching parts of a tooth or restorative material to a natural tooth or for the attaching of orthodontic bands to teeth by means of an adhesive.Anoxybacillus: A genus of GRAM-POSITIVE ENDOSPORE-FORMING BACTERIA in the family Bacillaceae. Most species have been isolated from HOT SPRINGS.Dental Instruments: Hand-held tools or implements especially used by dental professionals for the performance of clinical tasks.Bacterial Adhesion: Physicochemical property of fimbriated (FIMBRIAE, BACTERIAL) and non-fimbriated bacteria of attaching to cells, tissue, and nonbiological surfaces. It is a factor in bacterial colonization and pathogenicity.Bacterial Load: Measurable quantity of bacteria in an object, organism, or organism compartment.Dental Materials: Materials used in the production of dental bases, restorations, impressions, prostheses, etc.Biofouling: Process by which unwanted microbial, plant or animal materials or organisms accumulate on man-made surfaces.Virus Inactivation: Inactivation of viruses by non-immune related techniques. They include extremes of pH, HEAT treatment, ultraviolet radiation, IONIZING RADIATION; DESICCATION; ANTISEPTICS; DISINFECTANTS; organic solvents, and DETERGENTS.Hardness: The mechanical property of material that determines its resistance to force. HARDNESS TESTS measure this property.Toe Phalanges: Bones that make up the SKELETON of the TOES, consisting of two for the great toe, and three for each of the other toes.Incisor: Any of the eight frontal teeth (four maxillary and four mandibular) having a sharp incisal edge for cutting food and a single root, which occurs in man both as a deciduous and a permanent tooth. (Jablonski, Dictionary of Dentistry, 1992, p820)Cronobacter sakazakii: A species of gram-negative bacteria in the genus CHRONOBACTER, found in the environment and in foods.Acid Etching, Dental: Preparation of TOOTH surfaces and DENTAL MATERIALS with etching agents, usually phosphoric acid, to roughen the surface to increase adhesion or osteointegration.Acrylic ResinsEnvironmental Microbiology: The study of microorganisms living in a variety of environments (air, soil, water, etc.) and their pathogenic relationship to other organisms including man.Post and Core Technique: Use of a metal casting, usually with a post in the pulp or root canal, designed to support and retain an artificial crown.Pulpotomy: Dental procedure in which part of the pulp chamber is removed from the crown of a tooth.Food Handling: Any aspect of the operations in the preparation, processing, transport, storage, packaging, wrapping, exposure for sale, service, or delivery of food.Awards and PrizesPlastics: Polymeric materials (usually organic) of large molecular weight which can be shaped by flow. Plastic usually refers to the final product with fillers, plasticizers, pigments, and stabilizers included (versus the resin, the homogeneous polymeric starting material). (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)Aluminum Oxide: An oxide of aluminum, occurring in nature as various minerals such as bauxite, corundum, etc. It is used as an adsorbent, desiccating agent, and catalyst, and in the manufacture of dental cements and refractories.Silver: Silver. An element with the atomic symbol Ag, atomic number 47, and atomic weight 107.87. It is a soft metal that is used medically in surgical instruments, dental prostheses, and alloys. Long-continued use of silver salts can lead to a form of poisoning known as ARGYRIA.
Download our free solidary book to support research on VHL disease