Bone Cements: Adhesives used to fix prosthetic devices to bones and to cement bone to bone in difficult fractures. Synthetic resins are commonly used as cements. A mixture of monocalcium phosphate, monohydrate, alpha-tricalcium phosphate, and calcium carbonate with a sodium phosphate solution is also a useful bone paste.Polymethyl Methacrylate: Polymerized methyl methacrylate monomers which are used as sheets, moulding, extrusion powders, surface coating resins, emulsion polymers, fibers, inks, and films (From International Labor Organization, 1983). This material is also used in tooth implants, bone cements, and hard corneal contact lenses.Bone and Bones: A specialized CONNECTIVE TISSUE that is the main constituent of the SKELETON. The principle cellular component of bone is comprised of OSTEOBLASTS; OSTEOCYTES; and OSTEOCLASTS, while FIBRILLAR COLLAGENS and hydroxyapatite crystals form the BONE MATRIX.Dental Cements: Substances used to bond COMPOSITE RESINS to DENTAL ENAMEL and DENTIN. These bonding or luting agents are used in restorative dentistry, ROOT CANAL THERAPY; PROSTHODONTICS; and ORTHODONTICS.Methylmethacrylates: The methyl esters of methacrylic acid that polymerize easily and are used as tissue cements, dental materials, and absorbent for biological substances.Resin Cements: Dental cements composed either of polymethyl methacrylate or dimethacrylate, produced by mixing an acrylic monomer liquid with acrylic polymers and mineral fillers. The cement is insoluble in water and is thus resistant to fluids in the mouth, but is also irritating to the dental pulp. It is used chiefly as a luting agent for fabricated and temporary restorations. (Jablonski's Dictionary of Dentistry, 1992, p159)Vertebroplasty: Procedures to repair or stabilize vertebral fractures, especially compression fractures accomplished by injecting BONE CEMENTS into the fractured VERTEBRAE.Glass Ionomer Cements: A polymer obtained by reacting polyacrylic acid with a special anion-leachable glass (alumino-silicate). The resulting cement is more durable and tougher than others in that the materials comprising the polymer backbone do not leach out.Compressive Strength: The maximum compression a material can withstand without failure. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p427)Materials Testing: The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility.Bone Remodeling: The continuous turnover of BONE MATRIX and mineral that involves first an increase in BONE RESORPTION (osteoclastic activity) and later, reactive BONE FORMATION (osteoblastic activity). The process of bone remodeling takes place in the adult skeleton at discrete foci. The process ensures the mechanical integrity of the skeleton throughout life and plays an important role in calcium HOMEOSTASIS. An imbalance in the regulation of bone remodeling's two contrasting events, bone resorption and bone formation, results in many of the metabolic bone diseases, such as OSTEOPOROSIS.Silicate Cement: A relatively hard, translucent, restorative material used primarily in anterior teeth. (From Boucher's Clinical Dental Terminology, 4th ed, p50)Methylmethacrylate: The methyl ester of methacrylic acid. It polymerizes easily to form POLYMETHYL METHACRYLATE. It is used as a bone cement.Polycarboxylate Cement: Water-soluble low-molecular-weight polymers of acrylic or methacrylic acid that form solid, insoluble products when mixed with specially prepared ZnO powder. The resulting cement adheres to dental enamel and is also used as a luting agent.Bone Density: The amount of mineral per square centimeter of BONE. This is the definition used in clinical practice. Actual bone density would be expressed in grams per milliliter. It is most frequently measured by X-RAY ABSORPTIOMETRY or TOMOGRAPHY, X RAY COMPUTED. Bone density is an important predictor for OSTEOPOROSIS.Bone Resorption: Bone loss due to osteoclastic activity.Cementation: The joining of objects by means of a cement (e.g., in fracture fixation, such as in hip arthroplasty for joining of the acetabular component to the femoral component). In dentistry, it is used for the process of attaching parts of a tooth or restorative material to a natural tooth or for the attaching of orthodontic bands to teeth by means of an adhesive.Zirconium: Zirconium. A rather rare metallic element, atomic number 40, atomic weight 91.22, symbol Zr. (From Dorland, 28th ed)Barium Sulfate: A compound used as an x-ray contrast medium that occurs in nature as the mineral barite. It is also used in various manufacturing applications and mixed into heavy concrete to serve as a radiation shield.Tensile Strength: The maximum stress a material subjected to a stretching load can withstand without tearing. (McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p2001)Bone Neoplasms: Tumors or cancer located in bone tissue or specific BONES.Fractures, Compression: Crumbling or smashing of cancellous BONE by forces acting parallel to the long axis of bone. It is applied particularly to vertebral body fractures (SPINAL FRACTURES). (Blauvelt and Nelson, A Manual of Orthopedic Terminology, 1994, p4)Bone Marrow: The soft tissue filling the cavities of bones. Bone marrow exists in two types, yellow and red. Yellow marrow is found in the large cavities of large bones and consists mostly of fat cells and a few primitive blood cells. Red marrow is a hematopoietic tissue and is the site of production of erythrocytes and granular leukocytes. Bone marrow is made up of a framework of connective tissue containing branching fibers with the frame being filled with marrow cells.Calcium Phosphates: Calcium salts of phosphoric acid. These compounds are frequently used as calcium supplements.Spinal Fractures: Broken bones in the vertebral column.Porosity: Condition of having pores or open spaces. This often refers to bones, bone implants, or bone cements, but can refer to the porous state of any solid substance.Gentamicins: A complex of closely related aminoglycosides obtained from MICROMONOSPORA purpurea and related species. They are broad-spectrum antibiotics, but may cause ear and kidney damage. They act to inhibit PROTEIN BIOSYNTHESIS.Bone Substitutes: Synthetic or natural materials for the replacement of bones or bone tissue. They include hard tissue replacement polymers, natural coral, hydroxyapatite, beta-tricalcium phosphate, and various other biomaterials. The bone substitutes as inert materials can be incorporated into surrounding tissue or gradually replaced by original tissue.Hardness: The mechanical property of material that determines its resistance to force. HARDNESS TESTS measure this property.Zinc Oxide-Eugenol Cement: Used as a dental cement this is mainly zinc oxide (with strengtheners and accelerators) and eugenol. (Boucher's Clinical Dental Terminology, 4th ed, p50)Bone Development: The growth and development of bones from fetus to adult. It includes two principal mechanisms of bone growth: growth in length of long bones at the epiphyseal cartilages and growth in thickness by depositing new bone (OSTEOGENESIS) with the actions of OSTEOBLASTS and OSTEOCLASTS.Bone Marrow Cells: Cells contained in the bone marrow including fat cells (see ADIPOCYTES); STROMAL CELLS; MEGAKARYOCYTES; and the immediate precursors of most blood cells.Emulsifying Agents: SURFACE-ACTIVE AGENTS that induce a dispersion of undissolved material throughout a liquid.Femur: The longest and largest bone of the skeleton, it is situated between the hip and the knee.Bone Diseases: Diseases of BONES.Prosthesis Failure: Malfunction of implantation shunts, valves, etc., and prosthesis loosening, migration, and breaking.Adhesiveness: A property of the surface of an object that makes it stick to another surface.Hip Prosthesis: Replacement for a hip joint.Orthopedic Equipment: Nonexpendable items used in the performance of orthopedic surgery and related therapy. They are differentiated from ORTHOTIC DEVICES, apparatus used to prevent or correct deformities in patients.Prosthesis-Related Infections: Infections resulting from the implantation of prosthetic devices. The infections may be acquired from intraoperative contamination (early) or hematogenously acquired from other sites (late).Bone Regeneration: Renewal or repair of lost bone tissue. It excludes BONY CALLUS formed after BONE FRACTURES but not yet replaced by hard bone.Acrylic ResinsKyphoplasty: Procedures to restore vertebrae to their original shape following vertebral compression fractures by inflating a balloon inserted into the vertebrae, followed by removal of the balloon and injection of BONE CEMENTS to fill the cavity.Construction Materials: Supplies used in building.Microscopy, Electron, Scanning: Microscopy in which the object is examined directly by an electron beam scanning the specimen point-by-point. The image is constructed by detecting the products of specimen interactions that are projected above the plane of the sample, such as backscattered electrons. Although SCANNING TRANSMISSION ELECTRON MICROSCOPY also scans the specimen point by point with the electron beam, the image is constructed by detecting the electrons, or their interaction products that are transmitted through the sample plane, so that is a form of TRANSMISSION ELECTRON MICROSCOPY.Arthroplasty, Replacement, Hip: Replacement of the hip joint.Stress, Mechanical: A purely physical condition which exists within any material because of strain or deformation by external forces or by non-uniform thermal expansion; expressed quantitatively in units of force per unit area.Polymerization: Chemical reaction in which monomeric components are combined to form POLYMERS (e.g., POLYMETHYLMETHACRYLATE).Bone Transplantation: The grafting of bone from a donor site to a recipient site.Dental Bonding: An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing.Joint Prosthesis: Prostheses used to partially or totally replace a human or animal joint. (from UMDNS, 1999)Infusions, Spinal: The administration of medication by insertion of a tiny needle or catheter into the spinal sac or epidural cavity.Osseointegration: The growth action of bone tissue as it assimilates surgically implanted devices or prostheses to be used as either replacement parts (e.g., hip) or as anchors (e.g., endosseous dental implants).OsteomyelitisSurface Properties: Characteristics or attributes of the outer boundaries of objects, including molecules.ToluidinesBone Matrix: Extracellular substance of bone tissue consisting of COLLAGEN fibers, ground substance, and inorganic crystalline minerals and salts.Tibia: The second longest bone of the skeleton. It is located on the medial side of the lower leg, articulating with the FIBULA laterally, the TALUS distally, and the FEMUR proximally.Tobramycin: An aminoglycoside, broad-spectrum antibiotic produced by Streptomyces tenebrarius. It is effective against gram-negative bacteria, especially the PSEUDOMONAS species. It is a 10% component of the antibiotic complex, NEBRAMYCIN, produced by the same species.Bone Marrow Transplantation: The transference of BONE MARROW from one human or animal to another for a variety of purposes including HEMATOPOIETIC STEM CELL TRANSPLANTATION or MESENCHYMAL STEM CELL TRANSPLANTATION.Anti-Bacterial Agents: Substances that reduce the growth or reproduction of BACTERIA.Self-Curing of Dental Resins: The hardening or polymerization of bonding agents (DENTAL CEMENTS) via chemical reactions, usually involving two components. This type of dental bonding uses a self-cure or dual-cure system.Spine: The spinal or vertebral column.Calcium Compounds: Inorganic compounds that contain calcium as an integral part of the molecule.Chromium Alloys: Specific alloys not less than 85% chromium and nickel or cobalt, with traces of either nickel or cobalt, molybdenum, and other substances. They are used in partial dentures, orthopedic implants, etc.Silicates: The generic term for salts derived from silica or the silicic acids. They contain silicon, oxygen, and one or more metals, and may contain hydrogen. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th Ed)Osteoblasts: Bone-forming cells which secrete an EXTRACELLULAR MATRIX. HYDROXYAPATITE crystals are then deposited into the matrix to form bone.Osteoporosis: Reduction of bone mass without alteration in the composition of bone, leading to fractures. Primary osteoporosis can be of two major types: postmenopausal osteoporosis (OSTEOPOROSIS, POSTMENOPAUSAL) and age-related or senile osteoporosis.Carboxymethylcellulose Sodium: A cellulose derivative which is a beta-(1,4)-D-glucopyranose polymer. It is used as a bulk laxative and as an emulsifier and thickener in cosmetics and pharmaceuticals and as a stabilizer for reagents.Dental Prosthesis Retention: Holding a DENTAL PROSTHESIS in place by its design, or by the use of additional devices or adhesives.Magnesium Oxide: Magnesium oxide (MgO). An inorganic compound that occurs in nature as the mineral periclase. In aqueous media combines quickly with water to form magnesium hydroxide. It is used as an antacid and mild laxative and has many nonmedicinal uses.Dental Restoration, Temporary: A prosthesis or restoration placed for a limited period, from several days to several months, which is designed to seal the tooth and maintain its position until a permanent restoration (DENTAL RESTORATION, PERMANENT) will replace it. (From Jablonski, Dictionary of Dentistry, 1992)Dental Stress Analysis: The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures.Biomechanical Phenomena: The properties, processes, and behavior of biological systems under the action of mechanical forces.Finite Element Analysis: A computer based method of simulating or analyzing the behavior of structures or components.Spinal NeoplasmsAluminum Silicates: Any of the numerous types of clay which contain varying proportions of Al2O3 and SiO2. They are made synthetically by heating aluminum fluoride at 1000-2000 degrees C with silica and water vapor. (From Hawley's Condensed Chemical Dictionary, 11th ed)Curettage: A scraping, usually of the interior of a cavity or tract, for removal of new growth or other abnormal tissue, or to obtain material for tissue diagnosis. It is performed with a curet (curette), a spoon-shaped instrument designed for that purpose. (From Stedman, 25th ed & Dorland, 27th ed)Titanium: A dark-gray, metallic element of widespread distribution but occurring in small amounts; atomic number, 22; atomic weight, 47.90; symbol, Ti; specific gravity, 4.5; used for fixation of fractures. (Dorland, 28th ed)Cadaver: A dead body, usually a human body.Polymethacrylic Acids: Poly-2-methylpropenoic acids. Used in the manufacture of methacrylate resins and plastics in the form of pellets and granules, as absorbent for biological materials and as filters; also as biological membranes and as hydrogens. Synonyms: methylacrylate polymer; poly(methylacrylate); acrylic acid methyl ester polymer.Arthroplasty: Surgical reconstruction of a joint to relieve pain or restore motion.Bone Diseases, MetabolicEmbolism, Fat: Blocking of a blood vessel by fat deposits in the circulation. It is often seen after fractures of large bones or after administration of CORTICOSTEROIDS.Fractures, Bone: Breaks in bones.AcrylatesBisphenol A-Glycidyl Methacrylate: The reaction product of bisphenol A and glycidyl methacrylate that undergoes polymerization when exposed to ultraviolet light or mixed with a catalyst. It is used as a bond implant material and as the resin component of dental sealants and composite restorative materials.Prostheses and Implants: Artificial substitutes for body parts, and materials inserted into tissue for functional, cosmetic, or therapeutic purposes. Prostheses can be functional, as in the case of artificial arms and legs, or cosmetic, as in the case of an artificial eye. Implants, all surgically inserted or grafted into the body, tend to be used therapeutically. IMPLANTS, EXPERIMENTAL is available for those used experimentally.Drug Carriers: Forms to which substances are incorporated to improve the delivery and the effectiveness of drugs. Drug carriers are used in drug-delivery systems such as the controlled-release technology to prolong in vivo drug actions, decrease drug metabolism, and reduce drug toxicity. Carriers are also used in designs to increase the effectiveness of drug delivery to the target sites of pharmacological actions. Liposomes, albumin microspheres, soluble synthetic polymers, DNA complexes, protein-drug conjugates, and carrier erythrocytes among others have been employed as biodegradable drug carriers.Bone Morphogenetic Proteins: Bone-growth regulatory factors that are members of the transforming growth factor-beta superfamily of proteins. They are synthesized as large precursor molecules which are cleaved by proteolytic enzymes. The active form can consist of a dimer of two identical proteins or a heterodimer of two related bone morphogenetic proteins.Biocompatible Materials: Synthetic or natural materials, other than DRUGS, that are used to replace or repair any body TISSUES or bodily function.Osteogenesis: The process of bone formation. Histogenesis of bone including ossification.Equipment Failure Analysis: The evaluation of incidents involving the loss of function of a device. These evaluations are used for a variety of purposes such as to determine the failure rates, the causes of failures, costs of failures, and the reliability and maintainability of devices.Polystyrenes: Polymerized forms of styrene used as a biocompatible material, especially in dentistry. They are thermoplastic and are used as insulators, for injection molding and casting, as sheets, plates, rods, rigid forms and beads.Composite Resins: Synthetic resins, containing an inert filler, that are widely used in dentistry.Light-Curing of Dental Adhesives: The hardening or polymerization of bonding agents (DENTAL CEMENTS) via exposure to light.Prosthesis Design: The plan and delineation of prostheses in general or a specific prosthesis.Lumbar Vertebrae: VERTEBRAE in the region of the lower BACK below the THORACIC VERTEBRAE and above the SACRAL VERTEBRAE.Knee Prosthesis: Replacement for a knee joint.Bone Morphogenetic Protein 2: A potent osteoinductive protein that plays a critical role in the differentiation of osteoprogenitor cells into OSTEOBLASTS.Orthopedic Procedures: Procedures used to treat and correct deformities, diseases, and injuries to the MUSCULOSKELETAL SYSTEM, its articulations, and associated structures.Hip Joint: The joint that is formed by the articulation of the head of FEMUR and the ACETABULUM of the PELVIS.Crowns: A prosthetic restoration that reproduces the entire surface anatomy of the visible natural crown of a tooth. It may be partial (covering three or more surfaces of a tooth) or complete (covering all surfaces). It is made of gold or other metal, porcelain, or resin.Arthroplasty, Replacement: Partial or total replacement of a joint.Dentin: The hard portion of the tooth surrounding the pulp, covered by enamel on the crown and cementum on the root, which is harder and denser than bone but softer than enamel, and is thus readily abraded when left unprotected. (From Jablonski, Dictionary of Dentistry, 1992)Methacrylates: Acrylic acids or acrylates which are substituted in the C-2 position with a methyl group.Aluminum Compounds: Inorganic compounds that contain aluminum as an integral part of the molecule.Thoracic Vertebrae: A group of twelve VERTEBRAE connected to the ribs that support the upper trunk region.Time Factors: Elements of limited time intervals, contributing to particular results or situations.Ultrasonics: A subfield of acoustics dealing in the radio frequency range higher than acoustic SOUND waves (approximately above 20 kilohertz). Ultrasonic radiation is used therapeutically (DIATHERMY and ULTRASONIC THERAPY) to generate HEAT and to selectively destroy tissues. It is also used in diagnostics, for example, ULTRASONOGRAPHY; ECHOENCEPHALOGRAPHY; and ECHOCARDIOGRAPHY, to visually display echoes received from irradiated tissues.Dental Porcelain: A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992)Temporal Bone: Either of a pair of compound bones forming the lateral (left and right) surfaces and base of the skull which contains the organs of hearing. It is a large bone formed by the fusion of parts: the squamous (the flattened anterior-superior part), the tympanic (the curved anterior-inferior part), the mastoid (the irregular posterior portion), and the petrous (the part at the base of the skull).Dentin-Bonding Agents: Cements that act through infiltration and polymerization within the dentinal matrix and are used for dental restoration. They can be adhesive resins themselves, adhesion-promoting monomers, or polymerization initiators that act in concert with other agents to form a dentin-bonding system.Reoperation: A repeat operation for the same condition in the same patient due to disease progression or recurrence, or as followup to failed previous surgery.Ceramics: Products made by baking or firing nonmetallic minerals (clay and similar materials). In making dental restorations or parts of restorations the material is fused porcelain. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed & Boucher's Clinical Dental Terminology, 4th ed)Root Canal Filling Materials: Materials placed inside a root canal for the purpose of obturating or sealing it. The materials may be gutta-percha, silver cones, paste mixtures, or other substances. (Dorland, 28th ed, p631 & Boucher's Clinical Dental Terminology, 4th ed, p187)Resins, Synthetic: Polymers of high molecular weight which at some stage are capable of being molded and then harden to form useful components.Silver: Silver. An element with the atomic symbol Ag, atomic number 47, and atomic weight 107.87. It is a soft metal that is used medically in surgical instruments, dental prostheses, and alloys. Long-continued use of silver salts can lead to a form of poisoning known as ARGYRIA.Shear Strength: The internal resistance of a material to moving some parts of it parallel to a fixed plane, in contrast to stretching (TENSILE STRENGTH) or compression (COMPRESSIVE STRENGTH). Ionic crystals are brittle because, when subjected to shear, ions of the same charge are brought next to each other, which causes repulsion.Zinc Oxide: A mild astringent and topical protectant with some antiseptic action. It is also used in bandages, pastes, ointments, dental cements, and as a sunblock.Curing Lights, Dental: Light sources used to activate polymerization of light-cured DENTAL CEMENTS and DENTAL RESINS. Degree of cure and bond strength depends on exposure time, wavelength, and intensity of the curing light.Parietal Bone: One of a pair of irregularly shaped quadrilateral bones situated between the FRONTAL BONE and OCCIPITAL BONE, which together form the sides of the CRANIUM.Clindamycin: An antibacterial agent that is a semisynthetic analog of LINCOMYCIN.Hardness Tests: A test to determine the relative hardness of a metal, mineral, or other material according to one of several scales, such as Brinell, Mohs, Rockwell, Vickers, or Shore. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 6th ed)Compomers: Composite materials composed of an ion-leachable glass embedded in a polymeric matrix. They differ from GLASS IONOMER CEMENTS in that partially silanized glass particles are used to provide a direct bond to the resin matrix and the matrix is primarily formed by a light-activated, radical polymerization reaction.Post and Core Technique: Use of a metal casting, usually with a post in the pulp or root canal, designed to support and retain an artificial crown.X-Ray Microtomography: X-RAY COMPUTERIZED TOMOGRAPHY with resolution in the micrometer range.Inlays: Restorations of metal, porcelain, or plastic made to fit a cavity preparation, then cemented into the tooth. Onlays are restorations which fit into cavity preparations and overlay the occlusal surface of a tooth or teeth. Onlays are retained by frictional or mechanical factors.Particle Size: Relating to the size of solids.Alveolar Bone Loss: Resorption or wasting of the tooth-supporting bone (ALVEOLAR PROCESS) in the MAXILLA or MANDIBLE.Dental Cavity Lining: An inner coating, as of varnish or other protective substance, to cover the dental cavity wall. It is usually a resinous film-forming agent dissolved in a volatile solvent, or a suspension of calcium hydroxide in a solution of a synthetic resin. The lining seals the dentinal tubules and protects the pulp before a restoration is inserted. (Jablonski, Illustrated Dictionary of Dentistry, 1982)Surgical Procedures, Minimally Invasive: Procedures that avoid use of open, invasive surgery in favor of closed or local surgery. These generally involve use of laparoscopic devices and remote-control manipulation of instruments with indirect observation of the surgical field through an endoscope or similar device.Radioimmunodetection: Use of radiolabeled antibodies for diagnostic imaging of neoplasms. Antitumor antibodies are labeled with diverse radionuclides including iodine-131, iodine-123, indium-111, or technetium-99m and injected into the patient. Images are obtained by a scintillation camera.Calcium Hydroxide: A white powder prepared from lime that has many medical and industrial uses. It is in many dental formulations, especially for root canal filling.Dental Leakage: The seepage of fluids, debris, and micro-organisms between the walls of a prepared dental cavity and the restoration.Chemistry, Pharmaceutical: Chemistry dealing with the composition and preparation of agents having PHARMACOLOGIC ACTIONS or diagnostic use.Vancomycin: Antibacterial obtained from Streptomyces orientalis. It is a glycopeptide related to RISTOCETIN that inhibits bacterial cell wall assembly and is toxic to kidneys and the inner ear.Dental Restoration, Permanent: A restoration designed to remain in service for not less than 20 to 30 years, usually made of gold casting, cohesive gold, or amalgam. (Jablonski, Dictionary of Dentistry, 1992)Biofilms: Encrustations, formed from microbes (bacteria, algae, fungi, plankton, or protozoa) embedding in extracellular polymers, that adhere to surfaces such as teeth (DENTAL DEPOSITS); PROSTHESES AND IMPLANTS; and catheters. Biofilms are prevented from forming by treating surfaces with DENTIFRICES; DISINFECTANTS; ANTI-INFECTIVE AGENTS; and antifouling agents.Osteoclasts: A large multinuclear cell associated with the BONE RESORPTION. An odontoclast, also called cementoclast, is cytomorphologically the same as an osteoclast and is involved in CEMENTUM resorption.Apatites: A group of phosphate minerals that includes ten mineral species and has the general formula X5(YO4)3Z, where X is usually calcium or lead, Y is phosphorus or arsenic, and Z is chlorine, fluorine, or OH-. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)Dental Materials: Materials used in the production of dental bases, restorations, impressions, prostheses, etc.Bone Cysts: Benign unilocular lytic areas in the proximal end of a long bone with well defined and narrow endosteal margins. The cysts contain fluid and the cyst walls may contain some giant cells. Bone cysts usually occur in males between the ages 3-15 years.
Download our free solidary book to support research on VHL disease