A mixture of metallic elements or compounds with other metallic or metalloid elements in varying proportions.

Alloys that contain a high percentage of gold. They are used in restorative or prosthetic dentistry.

Specific alloys not less than 85% chromium and nickel or cobalt, with traces of either nickel or cobalt, molybdenum, and other substances. They are used in partial dentures, orthopedic implants, etc.

The fusion of ceramics (porcelain) to an alloy of two or more metals for use in restorative and prosthodontic dentistry. Examples of metal alloys employed include cobalt-chromium, gold-palladium, gold-platinum-palladium, and nickel-based alloys.

A dark-gray, metallic element of widespread distribution but occurring in small amounts; atomic number, 22; atomic weight, 47.90; symbol, Ti; specific gravity, 4.5; used for fixation of fractures. (Dorland, 28th ed)

The process of producing a form or impression made of metal or plaster using a mold.

The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility.

Material from which the casting mold is made in the fabrication of gold or cobalt-chromium castings. (Boucher's Clinical Dental Terminology, 4th ed, p168)

A chemical element having an atomic weight of 106.4, atomic number of 46, and the symbol Pd. It is a white, ductile metal resembling platinum, and following it in abundance and importance of applications. It is used in dentistry in the form of gold, silver, and copper alloys.

Silver. An element with the atomic symbol Ag, atomic number 47, and atomic weight 107.87. It is a soft metal that is used medically in surgical instruments, dental prostheses, and alloys. Long-continued use of silver salts can lead to a form of poisoning known as ARGYRIA.

A trace element that is required in bone formation. It has the atomic symbol Sn, atomic number 50, and atomic weight 118.71.

Characteristics or attributes of the outer boundaries of objects, including molecules.

Technique by which phase transitions of chemical reactions can be followed by observation of the heat absorbed or liberated.

Identification and measurement of ELEMENTS and their location based on the fact that X-RAYS emitted by an element excited by an electron beam have a wavelength characteristic of that element and an intensity related to its concentration. It is performed with an electron microscope fitted with an x-ray spectrometer, in scanning or transmission mode.

An oxide of aluminum, occurring in nature as various minerals such as bauxite, corundum, etc. It is used as an adsorbent, desiccating agent, and catalyst, and in the manufacture of dental cements and refractories.

Creation of a smooth and glossy surface finish on a denture or amalgam.

The methyl esters of methacrylic acid that polymerize easily and are used as tissue cements, dental materials, and absorbent for biological substances.

A trace element with the atomic symbol Ni, atomic number 28, and atomic weight 58.69. It is a cofactor of the enzyme UREASE.

The mechanical property of material that determines its resistance to force. HARDNESS TESTS measure this property.

The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures.

An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing.

A rare, metallic element designated by the symbol, Ga, atomic number 31, and atomic weight 69.72.

Niobium. A metal element atomic number 41, atomic weight 92.906, symbol Nb. (From Dorland, 28th ed)

Acrylic acids or acrylates which are substituted in the C-2 position with a methyl group.

Stainless steel. A steel containing Ni, Cr, or both. It does not tarnish on exposure and is used in corrosive environments. (Grant & Hack's Chemical Dictionary, 5th ed)

Preparation of TOOTH surfaces, and of materials bonded to teeth or DENTAL IMPLANTS, with agents and methods which roughen the surface to facilitate adhesion. Agents include phosphoric or other acids (ACID ETCHING, DENTAL) and methods include LASERS.

Coating with a metal or alloy by electrolysis.

Occurs in seeds of Brassica and Crucifera species. Thiouracil has been used as antithyroid, coronary vasodilator, and in congestive heart failure although its use has been largely supplanted by other drugs. It is known to cause blood dyscrasias and suspected of terato- and carcinogenesis.

The maximum stress a material subjected to a stretching load can withstand without tearing. (McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p2001)

A metallic element, atomic number 49, atomic weight 114.82, symbol In. It is named from its blue line in the spectrum. (From Dorland, 28th ed)

The internal resistance of a material to moving some parts of it parallel to a fixed plane, in contrast to stretching (TENSILE STRENGTH) or compression (COMPRESSIVE STRENGTH). Ionic crystals are brittle because, when subjected to shear, ions of the same charge are brought next to each other, which causes repulsion.

Platinum. A heavy, soft, whitish metal, resembling tin, atomic number 78, atomic weight 195.09, symbol Pt. (From Dorland, 28th ed) It is used in manufacturing equipment for laboratory and industrial use. It occurs as a black powder (platinum black) and as a spongy substance (spongy platinum) and may have been known in Pliny's time as "alutiae".

The study of the energy of electrons ejected from matter by the photoelectric effect, i.e., as a direct result of absorption of energy from electromagnetic radiation. As the energies of the electrons are characteristic of a specific element, the measurement of the energy of these electrons is a technique used to determine the chemical composition of surfaces.

Dental cements composed either of polymethyl methacrylate or dimethacrylate, produced by mixing an acrylic monomer liquid with acrylic polymers and mineral fillers. The cement is insoluble in water and is thus resistant to fluids in the mouth, but is also irritating to the dental pulp. It is used chiefly as a luting agent for fabricated and temporary restorations. (Jablonski's Dictionary of Dentistry, 1992, p159)

The science, art, or technology dealing with processes involved in the separation of metals from their ores, the technique of making or compounding the alloys, the techniques of working or heat-treating metals, and the mining of metals. It includes industrial metallurgy as well as metallurgical techniques employed in the preparation and working of metals used in dentistry, with special reference to orthodontic and prosthodontic appliances. (From Jablonski, Dictionary of Dentistry, 1992, p494)

Inorganic compounds that contain carbon as an integral part of the molecule but are not derived from hydrocarbons.

Holding a DENTAL PROSTHESIS in place by its design, or by the use of additional devices or adhesives.

Materials used in the production of dental bases, restorations, impressions, prostheses, etc.

A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992)

Wires of various dimensions and grades made of stainless steel or precious metal. They are used in orthodontic treatment.

Inorganic compounds that contain silicon as an integral part of the molecule.

Microscopy in which the object is examined directly by an electron beam scanning the specimen point-by-point. The image is constructed by detecting the products of specimen interactions that are projected above the plane of the sample, such as backscattered electrons. Although SCANNING TRANSMISSION ELECTRON MICROSCOPY also scans the specimen point by point with the electron beam, the image is constructed by detecting the electrons, or their interaction products that are transmitted through the sample plane, so that is a form of TRANSMISSION ELECTRON MICROSCOPY.

Thiones are organic compounds containing a sulfur atom bonded to two carbon atoms, often found in certain drugs and naturally occurring substances, which possess various pharmacological activities.

Inorganic or organic compounds that contain boron as an integral part of the molecule.

Compounds similar to hydrocarbons in which a tetravalent silicon atom replaces the carbon atom. They are very reactive, ignite in air, and form useful derivatives.

Substances used to bond COMPOSITE RESINS to DENTAL ENAMEL and DENTIN. These bonding or luting agents are used in restorative dentistry, ROOT CANAL THERAPY; PROSTHODONTICS; and ORTHODONTICS.

A trace element that plays a role in glucose metabolism. It has the atomic symbol Cr, atomic number 24, and atomic weight 52. According to the Fourth Annual Report on Carcinogens (NTP85-002,1985), chromium and some of its compounds have been listed as known carcinogens.

Metal devices for fastening together two or more parts of dental prostheses for stabilizing or retaining them by attachment to abutment teeth. For a precision attachment for a partial denture DENTURE PRECISION ATTACHMENT is available.

Acrylic resins, also known as polymethyl methacrylate (PMMA), are a type of synthetic resin formed from polymerized methyl methacrylate monomers, used in various medical applications such as dental restorations, orthopedic implants, and ophthalmic lenses due to their biocompatibility, durability, and transparency.

A prosthetic restoration that reproduces the entire surface anatomy of the visible natural crown of a tooth. It may be partial (covering three or more surfaces of a tooth) or complete (covering all surfaces). It is made of gold or other metal, porcelain, or resin.

The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal.

An alloy used in restorative dentistry that contains mercury, silver, tin, copper, and possibly zinc.

A test to determine the relative hardness of a metal, mineral, or other material according to one of several scales, such as Brinell, Mohs, Rockwell, Vickers, or Shore. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 6th ed)

A purely physical condition which exists within any material because of strain or deformation by external forces or by non-uniform thermal expansion; expressed quantitatively in units of force per unit area.

A metallic element that has the atomic number 13, atomic symbol Al, and atomic weight 26.98.

A heavy metal trace element with the atomic symbol Cu, atomic number 29, and atomic weight 63.55.

A partial denture designed and constructed to be removed readily from the mouth.

The spectrometric analysis of fluorescent X-RAYS, i.e. X-rays emitted after bombarding matter with high energy particles such as PROTONS; ELECTRONS; or higher energy X-rays. Identification of ELEMENTS by this technique is based on the specific type of X-rays that are emitted which are characteristic of the specific elements in the material being analyzed. The characteristic X-rays are distinguished and/or quantified by either wavelength dispersive or energy dispersive methods.

A trace element that is a component of vitamin B12. It has the atomic symbol Co, atomic number 27, and atomic weight 58.93. It is used in nuclear weapons, alloys, and pigments. Deficiency in animals leads to anemia; its excess in humans can lead to erythrocytosis.

Artificial substitutes for body parts, and materials inserted into tissue for functional, cosmetic, or therapeutic purposes. Prostheses can be functional, as in the case of artificial arms and legs, or cosmetic, as in the case of an artificial eye. Implants, all surgically inserted or grafted into the body, tend to be used therapeutically. IMPLANTS, EXPERIMENTAL is available for those used experimentally.

A technique of measuring the dielectric properties of materials, which vary over a range of frequencies depending on the physical properties of the material. The technique involves measuring, over a range of frequencies, ELECTRICAL IMPEDANCE and phase shift of an electric field as it passes through the material.

Inorganic or organic compounds that contain sulfur as an integral part of the molecule.

Zirconium. A rather rare metallic element, atomic number 40, atomic weight 91.22, symbol Zr. (From Dorland, 28th ed)

The methyl ester of methacrylic acid. It polymerizes easily to form POLYMETHYL METHACRYLATE. It is used as a bone cement.

The use of a layer of tooth-colored material, usually porcelain or acrylic resin, applied to the surface of natural teeth, crowns, or pontics by fusion, cementation, or mechanical retention.

A technique using a pneumatic, high-pressure stream of aluminum oxide to remove DENTAL ENAMEL; DENTIN; and restorative materials from teeth. In contrast to using DENTAL HIGH-SPEED EQUIPMENT, this method usually requires no dental anesthesia (ANESTHESIA, DENTAL) and reduces risks of tooth chipping and microfracturing. It is used primarily for routine DENTAL CAVITY PREPARATION.

Solution titration in which the end point is read from the electrode-potential variations with the concentrations of potential determining ions. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)

The quality or state of being able to be bent or creased repeatedly. (From Webster, 3d ed)

Natural teeth or teeth roots used as anchorage for a fixed or removable denture or other prosthesis (such as an implant) serving the same purpose.

The placing of a body or a part thereof into a liquid.

Biocompatible materials usually used in dental and bone implants that enhance biologic fixation, thereby increasing the bond strength between the coated material and bone, and minimize possible biological effects that may result from the implant itself.

Magnesium oxide (MgO). An inorganic compound that occurs in nature as the mineral periclase. In aqueous media combines quickly with water to form magnesium hydroxide. It is used as an antacid and mild laxative and has many nonmedicinal uses.

A property of the surface of an object that makes it stick to another surface.

Synthetic resins, containing an inert filler, that are widely used in dentistry.

Destruction by passage of a galvanic electric current, as in disintegration of a chemical compound in solution.

Products made by baking or firing nonmetallic minerals (clay and similar materials). In making dental restorations or parts of restorations the material is fused porcelain. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed & Boucher's Clinical Dental Terminology, 4th ed)

Binary compounds of oxygen containing the anion O(2-). The anion combines with metals to form alkaline oxides and non-metals to form acidic oxides.

Inorganic compounds that contain potassium as an integral part of the molecule.

The properties and processes of materials that affect their behavior under force.

Synthetic or natural materials, other than DRUGS, that are used to replace or repair any body TISSUES or bodily function.

The growth action of bone tissue as it assimilates surgically implanted devices or prostheses to be used as either replacement parts (e.g., hip) or as anchors (e.g., endosseous dental implants).

The process of reuniting or replacing broken or worn parts of a denture.

The branch of physics which deals with the motions of material bodies, including kinematics, dynamics, and statics. When the laws of mechanics are applied to living structures, as to the locomotor system, it is referred to as BIOMECHANICAL PHENOMENA. (From Dorland, 28th ed)

Biocompatible materials placed into (endosseous) or onto (subperiosteal) the jawbone to support a crown, bridge, or artificial tooth, or to stabilize a diseased tooth.

Electropositive chemical elements characterized by ductility, malleability, luster, and conductance of heat and electricity. They can replace the hydrogen of an acid and form bases with hydroxyl radicals. (Grant & Hackh's Chemical Dictionary, 5th ed)

Chemicals especially for use on instruments to destroy pathogenic organisms. (Boucher, Clinical Dental Terminology, 4th ed)

The study of chemical changes resulting from electrical action and electrical activity resulting from chemical changes.

Resistance and recovery from distortion of shape.

An electrochemical technique for measuring the current that flows in solution as a function of an applied voltage. The observed polarographic wave, resulting from the electrochemical response, depends on the way voltage is applied (linear sweep or differential pulse) and the type of electrode used. Usually a mercury drop electrode is used.

The plan, delineation, and location of actual structural elements of dentures. The design can relate to retainers, stress-breakers, occlusal rests, flanges, framework, lingual or palatal bars, reciprocal arms, etc.

A calcium salt that is used for a variety of purposes including: building materials, as a desiccant, in dentistry as an impression material, cast, or die, and in medicine for immobilizing casts and as a tablet excipient. It exists in various forms and states of hydration. Plaster of Paris is a mixture of powdered and heat-treated gypsum.

Substances that inhibit or arrest DENTAL CARIES formation. (Boucher's Clinical Dental Terminology, 4th ed)

The utilization of an electrical current to measure, analyze, or alter chemicals or chemical reactions in solution, cells, or tissues.

The visually perceived property of objects created by absorption or reflection of specific wavelengths of light.

Chemical reaction that occurs when saliva comes into contact with the metals in dental fillings. This reaction can send electric currents through the brain causing negative symptoms.

Surface resistance to the relative motion of one body against the rubbing, sliding, rolling, or flowing of another with which it is in contact.

Ionized gases, consisting of free electrons and ionized atoms or molecules which collectively behave differently than gas, solid, or liquid. Plasma gases are used in biomedical fields in surface modification; biological decontamination; dentistry (e.g., PLASMA ARC DENTAL CURING LIGHTS); and in other treatments (e.g., ARGON PLASMA COAGULATION).

Removable prosthesis constructed over natural teeth or implanted studs.

The scattering of x-rays by matter, especially crystals, with accompanying variation in intensity due to interference effects. Analysis of the crystal structure of materials is performed by passing x-rays through them and registering the diffraction image of the rays (CRYSTALLOGRAPHY, X-RAY). (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)

The selected form given to a natural tooth when it is reduced by instrumentation to receive a prosthesis (e.g., artificial crown or a retainer for a fixed or removable prosthesis). The selection of the form is guided by clinical circumstances and physical properties of the materials that make up the prosthesis. (Boucher's Clinical Dental Terminology, 4th ed, p239)

Presence of warmth or heat or a temperature notably higher than an accustomed norm.

A prosthesis that gains its support, stability, and retention from a substructure that is implanted under the soft tissues of the basal seat of the device and is in contact with bone. (From Boucher's Clinical Dental Terminology, 4th ed)

A restoration designed to remain in service for not less than 20 to 30 years, usually made of gold casting, cohesive gold, or amalgam. (Jablonski, Dictionary of Dentistry, 1992)

Diamond. A crystalline form of carbon that occurs as hard, colorless or tinted isomeric crystals. It is used as a precious stone, for cutting glass, and as bearings for delicate mechanisms. (From Grant & Hackh's Chemical Dictionary, 5th ed)

A statistical technique that isolates and assesses the contributions of categorical independent variables to variation in the mean of a continuous dependent variable.

Photography of objects viewed under a microscope using ordinary photographic methods.

Implants constructed of materials designed to be absorbed by the body without producing an immune response. They are usually composed of plastics and are frequently used in orthopedics and orthodontics.

Transparent, tasteless crystals found in nature as agate, amethyst, chalcedony, cristobalite, flint, sand, QUARTZ, and tridymite. The compound is insoluble in water or acids except hydrofluoric acid.

Replacement for a hip joint.

Polymerized methyl methacrylate monomers which are used as sheets, moulding, extrusion powders, surface coating resins, emulsion polymers, fibers, inks, and films (From International Labor Organization, 1983). This material is also used in tooth implants, bone cements, and hard corneal contact lenses.

An element of the rare earth family of metals. It has the atomic symbol Y, atomic number 39, and atomic weight 88.91. In conjunction with other rare earths, yttrium is used as a phosphor in television receivers and is a component of the yttrium-aluminum garnet (YAG) lasers.

The use of computers for designing and/or manufacturing of anything, including drugs, surgical procedures, orthotics, and prosthetics.

A yellow metallic element with the atomic symbol Au, atomic number 79, and atomic weight 197. It is used in jewelry, goldplating of other metals, as currency, and in dental restoration. Many of its clinical applications, such as ANTIRHEUMATIC AGENTS, are in the form of its salts.

Restorations of metal, porcelain, or plastic made to fit a cavity preparation, then cemented into the tooth. Onlays are restorations which fit into cavity preparations and overlay the occlusal surface of a tooth or teeth. Onlays are retained by frictional or mechanical factors.

A metallic element with the atomic symbol Mo, atomic number 42, and atomic weight 95.94. It is an essential trace element, being a component of the enzymes xanthine oxidase, aldehyde oxidase, and nitrate reductase. (From Dorland, 27th ed)

Coloring, shading, or tinting of prosthetic components, devices, and materials.

Welding is not typically considered a medical term, but rather refers to a process in manufacturing and construction involving the joining of metal components through heat or pressure, which isn't directly related to medicine or healthcare.

Beryllium. An element with the atomic symbol Be, atomic number 4, and atomic weight 9.01218. Short exposure to this element can lead to a type of poisoning known as BERYLLIOSIS.

Artificial substitutes for body parts and materials inserted into organisms during experimental studies.

Inorganic compounds that contain chromium as an integral part of the molecule.

Tungsten. A metallic element with the atomic symbol W, atomic number 74, and atomic weight 183.85. It is used in many manufacturing applications, including increasing the hardness, toughness, and tensile strength of steel; manufacture of filaments for incandescent light bulbs; and in contact points for automotive and electrical apparatus.

Argon. A noble gas with the atomic symbol Ar, atomic number 18, and atomic weight 39.948. It is used in fluorescent tubes and wherever an inert atmosphere is desired and nitrogen cannot be used.

Condition of having pores or open spaces. This often refers to bones, bone implants, or bone cements, but can refer to the porous state of any solid substance.

A simple organophosphorus compound that inhibits DNA polymerase, especially in viruses and is used as an antiviral agent.

Inorganic compounds that contain mercury as an integral part of the molecule.

Spectrophotometric techniques by which the absorption or emmision spectra of radiation from atoms are produced and analyzed.

Poly-2-methylpropenoic acids. Used in the manufacture of methacrylate resins and plastics in the form of pellets and granules, as absorbent for biological materials and as filters; also as biological membranes and as hydrogens. Synonyms: methylacrylate polymer; poly(methylacrylate); acrylic acid methyl ester polymer.

Further or repeated use of equipment, instruments, devices, or materials. It includes additional use regardless of the original intent of the producer as to disposability or durability. It does not include the repeated use of fluids or solutions.