A material used for cementation of inlays, crowns, bridges, and orthodontic appliances and occasionally as a temporary restoration. It is prepared by mixing zinc oxide and magnesium oxide powders with a liquid consisting principally of phosphoric acid, water, and buffers. (From Bouchers' Clinical Dental Terminology, 3d ed)
A relatively hard, translucent, restorative material used primarily in anterior teeth. (From Boucher's Clinical Dental Terminology, 4th ed, p50)
Substances used to bond COMPOSITE RESINS to DENTAL ENAMEL and DENTIN. These bonding or luting agents are used in restorative dentistry, ROOT CANAL THERAPY; PROSTHODONTICS; and ORTHODONTICS.
Adhesives used to fix prosthetic devices to bones and to cement bone to bone in difficult fractures. Synthetic resins are commonly used as cements. A mixture of monocalcium phosphate, monohydrate, alpha-tricalcium phosphate, and calcium carbonate with a sodium phosphate solution is also a useful bone paste.
The total of dental diagnostic, preventive, and restorative services provided to meet the needs of a patient (from Illustrated Dictionary of Dentistry, 1982).
Dental cements composed either of polymethyl methacrylate or dimethacrylate, produced by mixing an acrylic monomer liquid with acrylic polymers and mineral fillers. The cement is insoluble in water and is thus resistant to fluids in the mouth, but is also irritating to the dental pulp. It is used chiefly as a luting agent for fabricated and temporary restorations. (Jablonski's Dictionary of Dentistry, 1992, p159)
A polymer obtained by reacting polyacrylic acid with a special anion-leachable glass (alumino-silicate). The resulting cement is more durable and tougher than others in that the materials comprising the polymer backbone do not leach out.
Use for articles concerning dental education in general.
Educational institutions for individuals specializing in the field of dentistry.
Individuals enrolled a school of dentistry or a formal educational program in leading to a degree in dentistry.
Localized destruction of the tooth surface initiated by decalcification of the enamel followed by enzymatic lysis of organic structures and leading to cavity formation. If left unchecked, the cavity may penetrate the enamel and dentin and reach the pulp.
Water-soluble low-molecular-weight polymers of acrylic or methacrylic acid that form solid, insoluble products when mixed with specially prepared ZnO powder. The resulting cement adheres to dental enamel and is also used as a luting agent.
Dental care for patients with chronic diseases. These diseases include chronic cardiovascular, endocrinologic, hematologic, immunologic, neoplastic, and renal diseases. The concept does not include dental care for the mentally or physically disabled which is DENTAL CARE FOR DISABLED.
A richly vascularized and innervated connective tissue of mesodermal origin, contained in the central cavity of a tooth and delimited by the dentin, and having formative, nutritive, sensory, and protective functions. (Jablonski, Dictionary of Dentistry, 1992)
The giving of attention to the special dental needs of children, including the prevention of tooth diseases and instruction in dental hygiene and dental health. The dental care may include the services provided by dental specialists.
Facilities where dental care is provided to patients.
Persons trained in an accredited school or dental college and licensed by the state in which they reside to provide dental prophylaxis under the direction of a licensed dentist.
The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility.
The teaching staff and members of the administrative staff having academic rank in a dental school.
Polymerized methyl methacrylate monomers which are used as sheets, moulding, extrusion powders, surface coating resins, emulsion polymers, fibers, inks, and films (From International Labor Organization, 1983). This material is also used in tooth implants, bone cements, and hard corneal contact lenses.
Dental care for the emotionally, mentally, or physically disabled patient. It does not include dental care for the chronically ill ( = DENTAL CARE FOR CHRONICALLY ILL).
Abnormal fear or dread of visiting the dentist for preventive care or therapy and unwarranted anxiety over dental procedures.
Insurance providing coverage for dental care.
Personnel whose work is prescribed and supervised by the dentist.
Services designed to promote, maintain, or restore dental health.
The study of laws, theories, and hypotheses through a systematic examination of pertinent facts and their interpretation in the field of dentistry. (From Jablonski, Illustrated Dictionary of Dentistry, 1982, p674)
Used as a dental cement this is mainly zinc oxide (with strengtheners and accelerators) and eugenol. (Boucher's Clinical Dental Terminology, 4th ed, p50)
The giving of attention to the special dental needs of the elderly for proper maintenance or treatment. The dental care may include the services provided by dental specialists.
The curve formed by the row of TEETH in their normal position in the JAW. The inferior dental arch is formed by the mandibular teeth, and the superior dental arch by the maxillary teeth.
An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing.
A film that attaches to teeth, often causing DENTAL CARIES and GINGIVITIS. It is composed of MUCINS, secreted from salivary glands, and microorganisms.
The room or rooms in which the dentist and dental staff provide care. Offices include all rooms in the dentist's office suite.
The nonexpendable items used by the dentist or dental staff in the performance of professional duties. (From Boucher's Clinical Dental Terminology, 4th ed, p106)
Data collected during dental examination for the purpose of study, diagnosis, or treatment planning.
An alloy used in restorative dentistry that contains mercury, silver, tin, copper, and possibly zinc.
Materials used in the production of dental bases, restorations, impressions, prostheses, etc.
Personnel who provide dental service to patients in an organized facility, institution or agency.
The methyl esters of methacrylic acid that polymerize easily and are used as tissue cements, dental materials, and absorbent for biological substances.
Nonspecialized dental practice which is concerned with providing primary and continuing dental care.
Supplies used in building.
Biocompatible materials placed into (endosseous) or onto (subperiosteal) the jawbone to support a crown, bridge, or artificial tooth, or to stabilize a diseased tooth.
The joining of objects by means of a cement (e.g., in fracture fixation, such as in hip arthroplasty for joining of the acetabular component to the femoral component). In dentistry, it is used for the process of attaching parts of a tooth or restorative material to a natural tooth or for the attaching of orthodontic bands to teeth by means of an adhesive.
Individuals who assist the dentist or the dental hygienist.
The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures.
Educational programs designed to inform dentists of recent advances in their fields.
A range of methods used to reduce pain and anxiety during dental procedures.
Procedures to repair or stabilize vertebral fractures, especially compression fractures accomplished by injecting BONE CEMENTS into the fractured VERTEBRAE.
Radiographic techniques used in dentistry.
A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992)
The field of dentistry involved in procedures for designing and constructing dental appliances. It includes also the application of any technology to the field of dentistry.
Holding a DENTAL PROSTHESIS in place by its design, or by the use of additional devices or adhesives.
A prosthesis or restoration placed for a limited period, from several days to several months, which is designed to seal the tooth and maintain its position until a permanent restoration (DENTAL RESTORATION, PERMANENT) will replace it. (From Jablonski, Dictionary of Dentistry, 1992)
Presentation devices used for patient education and technique training in dentistry.
The maximum stress a material subjected to a stretching load can withstand without tearing. (McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p2001)
Educational programs for dental graduates entering a specialty. They include formal specialty training as well as academic work in the clinical and basic dental sciences, and may lead to board certification or an advanced dental degree.
The principles of proper professional conduct concerning the rights and duties of the dentist, relations with patients and fellow practitioners, as well as actions of the dentist in patient care and interpersonal relations with patient families. (From Stedman, 25th ed)
The hardening or polymerization of bonding agents (DENTAL CEMENTS) via chemical reactions, usually involving two components. This type of dental bonding uses a self-cure or dual-cure system.
Hospital department providing dental care.
The generic term for salts derived from silica or the silicic acids. They contain silicon, oxygen, and one or more metals, and may contain hydrogen. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th Ed)
Individuals licensed to practice DENTISTRY.
Societies whose membership is limited to dentists.
A systematic collection of factual data pertaining to dental or oral health and disease in a human population within a given geographic area.
A chronic endemic form of hypoplasia of the dental enamel caused by drinking water with a high fluorine content during the time of tooth formation, and characterized by defective calcification that gives a white chalky appearance to the enamel, which gradually undergoes brown discoloration. (Jablonski's Dictionary of Dentistry, 1992, p286)
Calcium salts of phosphoric acid. These compounds are frequently used as calcium supplements.
Inorganic compounds that contain calcium as an integral part of the molecule.
The granting of a license to practice dentistry.
Facilities for the performance of services related to dental treatment but not done directly in the patient's mouth.
Magnesium oxide (MgO). An inorganic compound that occurs in nature as the mineral periclase. In aqueous media combines quickly with water to form magnesium hydroxide. It is used as an antacid and mild laxative and has many nonmedicinal uses.
The mechanical property of material that determines its resistance to force. HARDNESS TESTS measure this property.
Poly-2-methylpropenoic acids. Used in the manufacture of methacrylate resins and plastics in the form of pellets and granules, as absorbent for biological materials and as filters; also as biological membranes and as hydrogens. Synonyms: methylacrylate polymer; poly(methylacrylate); acrylic acid methyl ester polymer.
Various branches of dental practice limited to specialized areas.
Amounts charged to the patient as payer for dental services.
A prosthetic restoration that reproduces the entire surface anatomy of the visible natural crown of a tooth. It may be partial (covering three or more surfaces of a tooth) or complete (covering all surfaces). It is made of gold or other metal, porcelain, or resin.
A mixture of metallic elements or compounds with other metallic or metalloid elements in varying proportions for use in restorative or prosthetic dentistry.
Synthetic resins, containing an inert filler, that are widely used in dentistry.
Any of the numerous types of clay which contain varying proportions of Al2O3 and SiO2. They are made synthetically by heating aluminum fluoride at 1000-2000 degrees C with silica and water vapor. (From Hawley's Condensed Chemical Dictionary, 11th ed)
The reaction product of bisphenol A and glycidyl methacrylate that undergoes polymerization when exposed to ultraviolet light or mixed with a catalyst. It is used as a bond implant material and as the resin component of dental sealants and composite restorative materials.
Individuals responsible for fabrication of dental appliances.
The hardening or polymerization of bonding agents (DENTAL CEMENTS) via exposure to light.
The organization and operation of the business aspects of a dental practice.
Dense fibrous layer formed from mesodermal tissue that surrounds the epithelial enamel organ. The cells eventually migrate to the external surface of the newly formed root dentin and give rise to the cementoblasts that deposit cementum on the developing root, fibroblasts of the developing periodontal ligament, and osteoblasts of the developing alveolar bone.
The hard portion of the tooth surrounding the pulp, covered by enamel on the crown and cementum on the root, which is harder and denser than bone but softer than enamel, and is thus readily abraded when left unprotected. (From Jablonski, Dictionary of Dentistry, 1992)
The maximum compression a material can withstand without failure. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p427)
Skills, techniques, standards, and principles used to improve the art and symmetry of the teeth and face to improve the appearance as well as the function of the teeth, mouth, and face. (From Boucher's Clinical Dental Terminology, 4th ed, p108)
Light sources used to activate polymerization of light-cured DENTAL CEMENTS and DENTAL RESINS. Degree of cure and bond strength depends on exposure time, wavelength, and intensity of the curing light.
The profession concerned with the teeth, oral cavity, and associated structures, and the diagnosis and treatment of their diseases including prevention and the restoration of defective and missing tissue.
Acrylic acids or acrylates which are substituted in the C-2 position with a methyl group.
The most posterior teeth on either side of the jaw, totaling eight in the deciduous dentition (2 on each side, upper and lower), and usually 12 in the permanent dentition (three on each side, upper and lower). They are grinding teeth, having large crowns and broad chewing surfaces. (Jablonski, Dictionary of Dentistry, 1992, p821)
Hand-held tools or implements especially used by dental professionals for the performance of clinical tasks.
Characteristics or attributes of the outer boundaries of objects, including molecules.
Zirconium. A rather rare metallic element, atomic number 40, atomic weight 91.22, symbol Zr. (From Dorland, 28th ed)
Acrylic resins, also known as polymethyl methacrylate (PMMA), are a type of synthetic resin formed from polymerized methyl methacrylate monomers, used in various medical applications such as dental restorations, orthopedic implants, and ophthalmic lenses due to their biocompatibility, durability, and transparency.
Providing for the full range of dental health services for diagnosis, treatment, follow-up, and rehabilitation of patients.
An operation in which carious material is removed from teeth and biomechanically correct forms are established in the teeth to receive and retain restorations. A constant requirement is provision for prevention of failure of the restoration through recurrence of decay or inadequate resistance to applied stresses. (Boucher's Clinical Dental Terminology, 4th ed, p239-40)
Education which increases the awareness and favorably influences the attitudes and knowledge relating to the improvement of dental health on a personal or community basis.
The psychological relations between the dentist and patient.
Polymers of high molecular weight which at some stage are capable of being molded and then harden to form useful components.
One of a set of bone-like structures in the mouth used for biting and chewing.
Any waste product generated by a dental office, surgery, clinic, or laboratory including amalgams, saliva, and rinse water.
Efforts to prevent and control the spread of infections within dental health facilities or those involving provision of dental care.
A detailed review and evaluation of selected clinical records by qualified professional personnel for evaluating quality of dental care.
Mesodermal tissue enclosed in the invaginated portion of the epithelial enamel organ and giving rise to the dentin and pulp.
An artificial replacement for one or more natural teeth or part of a tooth, or associated structures, ranging from a portion of a tooth to a complete denture. The dental prosthesis is used for cosmetic or functional reasons, or both. DENTURES and specific types of dentures are also available. (From Boucher's Clinical Dental Terminology, 4th ed, p244 & Jablonski, Dictionary of Dentistry, 1992, p643)
An inner coating, as of varnish or other protective substance, to cover the dental cavity wall. It is usually a resinous film-forming agent dissolved in a volatile solvent, or a suspension of calcium hydroxide in a solution of a synthetic resin. The lining seals the dentinal tubules and protects the pulp before a restoration is inserted. (Jablonski, Illustrated Dictionary of Dentistry, 1982)
Removal of dental plaque and dental calculus from the surface of a tooth, from the surface of a tooth apical to the gingival margin accumulated in periodontal pockets, or from the surface coronal to the gingival margin.
'Tooth diseases' is a broad term referring to various conditions affecting the teeth, including dental caries (cavities), periodontal disease (gum disease), tooth wear, tooth sensitivity, oral cancer, and developmental anomalies, which can result in pain, discomfort, or loss of teeth if left untreated.
Cements that act through infiltration and polymerization within the dentinal matrix and are used for dental restoration. They can be adhesive resins themselves, adhesion-promoting monomers, or polymerization initiators that act in concert with other agents to form a dentin-bonding system.
The seepage of fluids, debris, and micro-organisms between the walls of a prepared dental cavity and the restoration.
The optimal state of the mouth and normal functioning of the organs of the mouth without evidence of disease.
The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal.
Creation of a smooth and glossy surface finish on a denture or amalgam.
Substances that inhibit or arrest DENTAL CARIES formation. (Boucher's Clinical Dental Terminology, 4th ed)
The grafting or inserting of a prosthetic device of alloplastic material into the oral tissue beneath the mucosal or periosteal layer or within the bone. Its purpose is to provide support and retention to a partial or complete denture.
Inorganic compounds that contain aluminum as an integral part of the molecule.
Inability or inadequacy of a dental restoration or prosthesis to perform as expected.
Economic aspects of the dental profession and dental care.
Materials placed inside a root canal for the purpose of obturating or sealing it. The materials may be gutta-percha, silver cones, paste mixtures, or other substances. (Dorland, 28th ed, p631 & Boucher's Clinical Dental Terminology, 4th ed, p187)
"Decayed, missing and filled teeth," a routinely used statistical concept in dentistry.
The teeth of the first dentition, which are shed and replaced by the permanent teeth.
The predisposition to tooth decay (DENTAL CARIES).
Restorations of metal, porcelain, or plastic made to fit a cavity preparation, then cemented into the tooth. Onlays are restorations which fit into cavity preparations and overlay the occlusal surface of a tooth or teeth. Onlays are retained by frictional or mechanical factors.
Crumbling or smashing of cancellous BONE by forces acting parallel to the long axis of bone. It is applied particularly to vertebral body fractures (SPINAL FRACTURES). (Blauvelt and Nelson, A Manual of Orthopedic Terminology, 1994, p4)
Composite materials composed of an ion-leachable glass embedded in a polymeric matrix. They differ from GLASS IONOMER CEMENTS in that partially silanized glass particles are used to provide a direct bond to the resin matrix and the matrix is primarily formed by a light-activated, radical polymerization reaction.
The application of computer and information sciences to improve dental practice, research, education and management.
The internal resistance of a material to moving some parts of it parallel to a fixed plane, in contrast to stretching (TENSILE STRENGTH) or compression (COMPRESSIVE STRENGTH). Ionic crystals are brittle because, when subjected to shear, ions of the same charge are brought next to each other, which causes repulsion.
Natural teeth or teeth roots used as anchorage for a fixed or removable denture or other prosthesis (such as an implant) serving the same purpose.
Broken bones in the vertebral column.
A treatment modality in endodontics concerned with the therapy of diseases of the dental pulp. For preparatory procedures, ROOT CANAL PREPARATION is available.
Products made by baking or firing nonmetallic minerals (clay and similar materials). In making dental restorations or parts of restorations the material is fused porcelain. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed & Boucher's Clinical Dental Terminology, 4th ed)
The practice of personal hygiene of the mouth. It includes the maintenance of oral cleanliness, tissue tone, and general preservation of oral health.
The relationship of all the components of the masticatory system in normal function. It has special reference to the position and contact of the maxillary and mandibular teeth for the highest efficiency during the excursive movements of the jaw that are essential for mastication. (From Jablonski, Dictionary of Dentistry, 1992, p556, p472)
A mild astringent and topical protectant with some antiseptic action. It is also used in bandages, pastes, ointments, dental cements, and as a sunblock.
A test to determine the relative hardness of a metal, mineral, or other material according to one of several scales, such as Brinell, Mohs, Rockwell, Vickers, or Shore. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 6th ed)
Use of a metal casting, usually with a post in the pulp or root canal, designed to support and retain an artificial crown.
A rapid, low-dose, digital imaging system using a small intraoral sensor instead of radiographic film, an intensifying screen, and a charge-coupled device. It presents the possibility of reduced patient exposure and minimal distortion, although resolution and latitude are inferior to standard dental radiography. A receiver is placed in the mouth, routing signals to a computer which images the signals on a screen or in print. It includes digitizing from x-ray film or any other detector. (From MEDLINE abstracts; personal communication from Dr. Charles Berthold, NIDR)
The selected form given to a natural tooth when it is reduced by instrumentation to receive a prosthesis (e.g., artificial crown or a retainer for a fixed or removable prosthesis). The selection of the form is guided by clinical circumstances and physical properties of the materials that make up the prosthesis. (Boucher's Clinical Dental Terminology, 4th ed, p239)
That phase of clinical dentistry concerned with the restoration of parts of existing teeth that are defective through disease, trauma, or abnormal development, to the state of normal function, health, and esthetics, including preventive, diagnostic, biological, mechanical, and therapeutic techniques, as well as material and instrument science and application. (Jablonski's Dictionary of Dentistry, 2d ed, p237)
Use for material on dental facilities in general or for which there is no specific heading.
Inorganic salts of hydrofluoric acid, HF, in which the fluorine atom is in the -1 oxidation state. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed) Sodium and stannous salts are commonly used in dentifrices.
Microscopy in which the object is examined directly by an electron beam scanning the specimen point-by-point. The image is constructed by detecting the products of specimen interactions that are projected above the plane of the sample, such as backscattered electrons. Although SCANNING TRANSMISSION ELECTRON MICROSCOPY also scans the specimen point by point with the electron beam, the image is constructed by detecting the electrons, or their interaction products that are transmitted through the sample plane, so that is a form of TRANSMISSION ELECTRON MICROSCOPY.
Devices used in the home by persons to maintain dental and periodontal health. The devices include toothbrushes, dental flosses, water irrigators, gingival stimulators, etc.
Chemical reaction in which monomeric components are combined to form POLYMERS (e.g., POLYMETHYLMETHACRYLATE).
The branch of dentistry concerned with the prevention of disease and the maintenance and promotion of oral health.
Photographic techniques used in ORTHODONTICS; DENTAL ESTHETICS; and patient education.
A white powder prepared from lime that has many medical and industrial uses. It is in many dental formulations, especially for root canal filling.
The surgical removal of a tooth. (Dorland, 28th ed)
The degree of approximation or fit of filling material or dental prosthetic to the tooth surface. A close marginal adaptation and seal at the interface is important for successful dental restorations.
Alloys that contain a high percentage of gold. They are used in restorative or prosthetic dentistry.
Any of the eight frontal teeth (four maxillary and four mandibular) having a sharp incisal edge for cutting food and a single root, which occurs in man both as a deciduous and a permanent tooth. (Jablonski, Dictionary of Dentistry, 1992, p820)
Preparation of TOOTH surfaces and DENTAL MATERIALS with etching agents, usually phosphoric acid, to roughen the surface to increase adhesion or osteointegration.
The use of a layer of tooth-colored material, usually porcelain or acrylic resin, applied to the surface of natural teeth, crowns, or pontics by fusion, cementation, or mechanical retention.
The practice of dentistry concerned with preventive as well as diagnostic and treatment programs in a circumscribed population.
General or unspecified diseases of the stomatognathic system, comprising the mouth, teeth, jaws, and pharynx.
The practice of dentistry concerned with the dental problems of children, proper maintenance, and treatment. The dental care may include the services provided by dental specialists.
Professional society representing the field of dentistry.
A restoration designed to remain in service for not less than 20 to 30 years, usually made of gold casting, cohesive gold, or amalgam. (Jablonski, Dictionary of Dentistry, 1992)
Replacement for a hip joint.
Patterns of practice in dentistry related to diagnosis and treatment.
A cinnamate derivative of the shikamate pathway found in CLOVE OIL and other PLANTS.
A purely physical condition which exists within any material because of strain or deformation by external forces or by non-uniform thermal expansion; expressed quantitatively in units of force per unit area.
Traumatic or other damage to teeth including fractures (TOOTH FRACTURES) or displacements (TOOTH LUXATION).
Application of a protective agent to an exposed pulp (direct capping) or the remaining thin layer of dentin over a nearly exposed pulp (indirect capping) in order to allow the pulp to recover and maintain its normal vitality and function.
A property of the surface of an object that makes it stick to another surface.
One of the eight permanent teeth, two on either side in each jaw, between the canines (CUSPID) and the molars (MOLAR), serving for grinding and crushing food. The upper have two cusps (bicuspid) but the lower have one to three. (Jablonski, Dictionary of Dentistry, 1992, p822)
Insertion of an implant into the bone of the mandible or maxilla. The implant has an exposed head which protrudes through the mucosa and is a prosthodontic abutment.
Material from which the casting mold is made in the fabrication of gold or cobalt-chromium castings. (Boucher's Clinical Dental Terminology, 4th ed, p168)
A dental specialty concerned with the maintenance of the dental pulp in a state of health and the treatment of the pulp cavity (pulp chamber and pulp canal).
Compounds similar to hydrocarbons in which a tetravalent silicon atom replaces the carbon atom. They are very reactive, ignite in air, and form useful derivatives.
Pain in the adjacent areas of the teeth.
Laws and regulations pertaining to the field of dentistry, proposed for enactment or recently enacted by a legislative body.
The act of cleaning teeth with a brush to remove plaque and prevent tooth decay. (From Webster, 3d ed)
Procedures to restore vertebrae to their original shape following vertebral compression fractures by inflating a balloon inserted into the vertebrae, followed by removal of the balloon and injection of BONE CEMENTS to fill the cavity.
Congenital absence of or defects in structures of the teeth.
The escape of diagnostic or therapeutic material from the vessel into which it is introduced into the surrounding tissue or body cavity.
Malfunction of implantation shunts, valves, etc., and prosthesis loosening, migration, and breaking.
Agents used to occlude dental enamel pits and fissures in the prevention of dental caries.
Preparation of TOOTH surfaces, and of materials bonded to teeth or DENTAL IMPLANTS, with agents and methods which roughen the surface to facilitate adhesion. Agents include phosphoric or other acids (ACID ETCHING, DENTAL) and methods include LASERS.
Specific alloys not less than 85% chromium and nickel or cobalt, with traces of either nickel or cobalt, molybdenum, and other substances. They are used in partial dentures, orthopedic implants, etc.
A group of phosphate minerals that includes ten mineral species and has the general formula X5(YO4)3Z, where X is usually calcium or lead, Y is phosphorus or arsenic, and Z is chlorine, fluorine, or OH-. (McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed)
The third tooth to the left and to the right of the midline of either jaw, situated between the second INCISOR and the premolar teeth (BICUSPID). (Jablonski, Dictionary of Dentistry, 1992, p817)
Techniques used for removal of bonded orthodontic appliances, restorations, or fixed dentures from teeth.
Fluorides, usually in pastes or gels, used for topical application to reduce the incidence of DENTAL CARIES.
The space in a tooth bounded by the dentin and containing the dental pulp. The portion of the cavity within the crown of the tooth is the pulp chamber; the portion within the root is the pulp canal or root canal.
An acquired or hereditary condition due to deficiency in the formation of tooth enamel (AMELOGENESIS). It is usually characterized by defective, thin, or malformed DENTAL ENAMEL. Risk factors for enamel hypoplasia include gene mutations, nutritional deficiencies, diseases, and environmental factors.
'Dental libraries' are collections of resources, including books, journals, databases, and multimedia materials, that provide information and knowledge to support dental education, research, and practice.
An oxide of aluminum, occurring in nature as various minerals such as bauxite, corundum, etc. It is used as an adsorbent, desiccating agent, and catalyst, and in the manufacture of dental cements and refractories.
Glands of external secretion that release its secretions to the body's cavities, organs, or surface, through a duct.
Examination of the mouth and teeth toward the identification and diagnosis of intraoral disease or manifestation of non-oral conditions.
An approach or process of practicing oral health care that requires the judicious integration of systematic assessments of clinical relevant scientific evidence, relating to the patient's oral and medical condition and history, with the dentist's clinical expertise and the patient's treatment needs and preferences. (from J Am Dent Assoc 134: 689, 2003)
Any group of three or more full-time dentists, organized in a legally recognized entity for the provision of dental care, sharing space, equipment, personnel and records for both patient care and business management, and who have a predetermined arrangement for the distribution of income.
Endodontic diseases of the DENTAL PULP inside the tooth, which is distinguished from PERIAPICAL DISEASES of the tissue surrounding the root.
Replacement of the hip joint.
Abnormal concretion or calcified deposit that forms around the teeth or dental prostheses.
The upper part of the tooth, which joins the lower part of the tooth (TOOTH ROOT) at the cervix (TOOTH CERVIX) at a line called the cementoenamel junction. The entire surface of the crown is covered with enamel which is thicker at the extremity and becomes progressively thinner toward the cervix. (From Jablonski, Dictionary of Dentistry, 1992, p216)
'Dental pulp calcification' is a pathological condition characterized by the deposition of hard tissue within the pulp chamber and root canal(s), which can result in the obliteration of pulpal space, potentially leading to various clinical symptoms such as pain or dental sensitivity.
The largest and strongest bone of the FACE constituting the lower jaw. It supports the lower teeth.
The teeth collectively in the dental arch. Dentition ordinarily refers to the natural teeth in position in their alveoli. Dentition referring to the deciduous teeth is DENTITION, PRIMARY; to the permanent teeth, DENTITION, PERMANENT. (From Jablonski, Dictionary of Dentistry, 1992)
The quality or state of being able to be bent or creased repeatedly. (From Webster, 3d ed)
An index which scores the degree of dental plaque accumulation.
One of a pair of irregularly shaped bones that form the upper jaw. A maxillary bone provides tooth sockets for the superior teeth, forms part of the ORBIT, and contains the MAXILLARY SINUS.
A calcium salt that is used for a variety of purposes including: building materials, as a desiccant, in dentistry as an impression material, cast, or die, and in medicine for immobilizing casts and as a tablet excipient. It exists in various forms and states of hydration. Plaster of Paris is a mixture of powdered and heat-treated gypsum.
The part of a tooth from the neck to the apex, embedded in the alveolar process and covered with cementum. A root may be single or divided into several branches, usually identified by their relative position, e.g., lingual root or buccal root. Single-rooted teeth include mandibular first and second premolars and the maxillary second premolar teeth. The maxillary first premolar has two roots in most cases. Maxillary molars have three roots. (Jablonski, Dictionary of Dentistry, 1992, p690)