A prosthetic restoration that reproduces the entire surface anatomy of the visible natural crown of a tooth. It may be partial (covering three or more surfaces of a tooth) or complete (covering all surfaces). It is made of gold or other metal, porcelain, or resin.
The upper part of the tooth, which joins the lower part of the tooth (TOOTH ROOT) at the cervix (TOOTH CERVIX) at a line called the cementoenamel junction. The entire surface of the crown is covered with enamel which is thicker at the extremity and becomes progressively thinner toward the cervix. (From Jablonski, Dictionary of Dentistry, 1992, p216)
Macrocyclic polyethers with the repeating unit of (-CH2-CH2-O)n where n is greater than 2 and some oxygens may be replaced by nitrogen, sulfur or phosphorus. These compounds are useful for coordinating CATIONS. The nomenclature uses a prefix to indicate the size of the ring and a suffix for the number of heteroatoms.
The selected form given to a natural tooth when it is reduced by instrumentation to receive a prosthesis (e.g., artificial crown or a retainer for a fixed or removable prosthesis). The selection of the form is guided by clinical circumstances and physical properties of the materials that make up the prosthesis. (Boucher's Clinical Dental Terminology, 4th ed, p239)
Technique combining controlled eruptive tooth movement and incision of the supracrestal gingival attachment to allow for proper restoration of a destroyed or damaged crown of a tooth. Controlled eruption of the tooth is obtained using ORTHODONTIC APPLIANCES. During this eruptive phase, repeated incisions are made at the junctional epithelium of the sulcus and the supracrestal connective tissue to prevent coronal displacement of the gingiva and of the attachment apparatus.
The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal.
A localized proliferation of plant tissue forming a swelling or outgrowth, commonly with a characteristic shape and unlike any organ of the normal plant. Plant tumors or galls usually form in response to the action of a pathogen or a pest. (Holliday, P., A Dictionary of Plant Pathology, 1989, p330)
A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992)
The use of a layer of tooth-colored material, usually porcelain or acrylic resin, applied to the surface of natural teeth, crowns, or pontics by fusion, cementation, or mechanical retention.
The fusion of ceramics (porcelain) to an alloy of two or more metals for use in restorative and prosthodontic dentistry. Examples of metal alloys employed include cobalt-chromium, gold-palladium, gold-platinum-palladium, and nickel-based alloys.
Holding a DENTAL PROSTHESIS in place by its design, or by the use of additional devices or adhesives.
The most posterior teeth on either side of the jaw, totaling eight in the deciduous dentition (2 on each side, upper and lower), and usually 12 in the permanent dentition (three on each side, upper and lower). They are grinding teeth, having large crowns and broad chewing surfaces. (Jablonski, Dictionary of Dentistry, 1992, p821)
The use of computers for designing and/or manufacturing of anything, including drugs, surgical procedures, orthotics, and prosthetics.
Zirconium. A rather rare metallic element, atomic number 40, atomic weight 91.22, symbol Zr. (From Dorland, 28th ed)
Inability or inadequacy of a dental restoration or prosthesis to perform as expected.
Any of the eight frontal teeth (four maxillary and four mandibular) having a sharp incisal edge for cutting food and a single root, which occurs in man both as a deciduous and a permanent tooth. (Jablonski, Dictionary of Dentistry, 1992, p820)
Use of a metal casting, usually with a post in the pulp or root canal, designed to support and retain an artificial crown.
The process of producing a form or impression made of metal or plaster using a mold.
Measurement of tooth characteristics.
A mixture of metallic elements or compounds with other metallic or metalloid elements in varying proportions for use in restorative or prosthetic dentistry.
One of the eight permanent teeth, two on either side in each jaw, between the canines (CUSPID) and the molars (MOLAR), serving for grinding and crushing food. The upper have two cusps (bicuspid) but the lower have one to three. (Jablonski, Dictionary of Dentistry, 1992, p822)
The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures.
A material used for cementation of inlays, crowns, bridges, and orthodontic appliances and occasionally as a temporary restoration. It is prepared by mixing zinc oxide and magnesium oxide powders with a liquid consisting principally of phosphoric acid, water, and buffers. (From Bouchers' Clinical Dental Terminology, 3d ed)
The part of a tooth from the neck to the apex, embedded in the alveolar process and covered with cementum. A root may be single or divided into several branches, usually identified by their relative position, e.g., lingual root or buccal root. Single-rooted teeth include mandibular first and second premolars and the maxillary second premolar teeth. The maxillary first premolar has two roots in most cases. Maxillary molars have three roots. (Jablonski, Dictionary of Dentistry, 1992, p690)
Products made by baking or firing nonmetallic minerals (clay and similar materials). In making dental restorations or parts of restorations the material is fused porcelain. (From McGraw-Hill Dictionary of Scientific and Technical Terms, 4th ed & Boucher's Clinical Dental Terminology, 4th ed)
The study of the teeth of early forms of life through fossil remains.
A tooth from which the dental pulp has been removed or is necrotic. (Boucher, Clinical Dental Terminology, 4th ed)
Natural teeth or teeth roots used as anchorage for a fixed or removable denture or other prosthesis (such as an implant) serving the same purpose.
Break or rupture of a tooth or tooth root.
Occlusal wear of the surfaces of restorations and surface wear of dentures.
Substances used to bond COMPOSITE RESINS to DENTAL ENAMEL and DENTIN. These bonding or luting agents are used in restorative dentistry, ROOT CANAL THERAPY; PROSTHODONTICS; and ORTHODONTICS.
A denture replacing one or more (but not all) natural teeth. It is supported and retained by underlying tissue and some or all of the remaining teeth.
The teeth of the first dentition, which are shed and replaced by the permanent teeth.
The third tooth to the left and to the right of the midline of either jaw, situated between the second INCISOR and the premolar teeth (BICUSPID). (Jablonski, Dictionary of Dentistry, 1992, p817)
The degree of approximation or fit of filling material or dental prosthetic to the tooth surface. A close marginal adaptation and seal at the interface is important for successful dental restorations.
The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility.
One of a set of bone-like structures in the mouth used for biting and chewing.
The joining of objects by means of a cement (e.g., in fracture fixation, such as in hip arthroplasty for joining of the acetabular component to the femoral component). In dentistry, it is used for the process of attaching parts of a tooth or restorative material to a natural tooth or for the attaching of orthodontic bands to teeth by means of an adhesive.
Synthetic resins, containing an inert filler, that are widely used in dentistry.
Materials used in the production of dental bases, restorations, impressions, prostheses, etc.
Dental cements composed either of polymethyl methacrylate or dimethacrylate, produced by mixing an acrylic monomer liquid with acrylic polymers and mineral fillers. The cement is insoluble in water and is thus resistant to fluids in the mouth, but is also irritating to the dental pulp. It is used chiefly as a luting agent for fabricated and temporary restorations. (Jablonski's Dictionary of Dentistry, 1992, p159)
Remains, impressions, or traces of animals or plants of past geological times which have been preserved in the earth's crust.
A hard thin translucent layer of calcified substance which envelops and protects the dentin of the crown of the tooth. It is the hardest substance in the body and is almost entirely composed of calcium salts. Under the microscope, it is composed of thin rods (enamel prisms) held together by cementing substance, and surrounded by an enamel sheath. (From Jablonski, Dictionary of Dentistry, 1992, p286)
An element of the rare earth family of metals. It has the atomic symbol Y, atomic number 39, and atomic weight 88.91. In conjunction with other rare earths, yttrium is used as a phosphor in television receivers and is a component of the yttrium-aluminum garnet (YAG) lasers.
Water-soluble low-molecular-weight polymers of acrylic or methacrylic acid that form solid, insoluble products when mixed with specially prepared ZnO powder. The resulting cement adheres to dental enamel and is also used as a luting agent.
An oxide of aluminum, occurring in nature as various minerals such as bauxite, corundum, etc. It is used as an adsorbent, desiccating agent, and catalyst, and in the manufacture of dental cements and refractories.
Material from which the casting mold is made in the fabrication of gold or cobalt-chromium castings. (Boucher's Clinical Dental Terminology, 4th ed, p168)
A dental specialty concerned with the restoration and maintenance of oral function by the replacement of missing TEETH and related structures by artificial devices or DENTAL PROSTHESES.
Characteristics or attributes of the outer boundaries of objects, including molecules.
Stainless steel. A steel containing Ni, Cr, or both. It does not tarnish on exposure and is used in corrosive environments. (Grant & Hack's Chemical Dictionary, 5th ed)
A treatment modality in endodontics concerned with the therapy of diseases of the dental pulp. For preparatory procedures, ROOT CANAL PREPARATION is available.
A partial denture intended for short-term use in a temporary or emergency situation.
The plan, delineation, and location of actual structural elements of dentures. The design can relate to retainers, stress-breakers, occlusal rests, flanges, framework, lingual or palatal bars, reciprocal arms, etc.
Alloys that contain a high percentage of gold. They are used in restorative or prosthetic dentistry.
One of a pair of irregularly shaped bones that form the upper jaw. A maxillary bone provides tooth sockets for the superior teeth, forms part of the ORBIT, and contains the MAXILLARY SINUS.
The constricted part of the tooth at the junction of the crown and root or roots. It is often referred to as the cementoenamel junction (CEJ), the line at which the cementum covering the root of a tooth and the enamel of the tooth meet. (Jablonski, Dictionary of Dentistry, 1992, p530, p433)
Any restorative and replacement device that is used as a therapeutic aid in the treatment of periodontal disease. It is an adjunct to other forms of periodontal therapy and does not cure periodontal disease by itself. (Boucher's Clinical Dental Terminology, 3d ed)
A partial denture attached to prepared natural teeth, roots, or implants by cementation.
A genus of gram-negative, aerobic, rod-shaped bacteria that activate PLANT ROOT NODULATION in leguminous plants. Members of this genus are nitrogen-fixing and common soil inhabitants.
A species of gram-negative, aerobic bacteria isolated from soil and the stems, leafs, and roots of plants. Some biotypes are pathogenic and cause the formation of PLANT TUMORS in a wide variety of higher plants. The species is a major research tool in biotechnology.
Specific alloys not less than 85% chromium and nickel or cobalt, with traces of either nickel or cobalt, molybdenum, and other substances. They are used in partial dentures, orthopedic implants, etc.
Any change in the hue, color, or translucency of a tooth due to any cause. Restorative filling materials, drugs (both topical and systemic), pulpal necrosis, or hemorrhage may be responsible. (Jablonski, Dictionary of Dentistry, 1992, p253)
A restoration designed to remain in service for not less than 20 to 30 years, usually made of gold casting, cohesive gold, or amalgam. (Jablonski, Dictionary of Dentistry, 1992)
Procedures carried out with regard to the teeth or tooth structures preparatory to specified dental therapeutic and surgical measures.
An acquired or hereditary condition due to deficiency in the formation of tooth enamel (AMELOGENESIS). It is usually characterized by defective, thin, or malformed DENTAL ENAMEL. Risk factors for enamel hypoplasia include gene mutations, nutritional deficiencies, diseases, and environmental factors.
The force applied by the masticatory muscles in dental occlusion.
The wearing away of a tooth as a result of tooth-to-tooth contact, as in mastication, occurring only on the occlusal, incisal, and proximal surfaces. It is chiefly associated with aging. It is differentiated from TOOTH ABRASION (the pathologic wearing away of the tooth substance by friction, as brushing, bruxism, clenching, and other mechanical causes) and from TOOTH EROSION (the loss of substance caused by chemical action without bacterial action). (Jablonski, Dictionary of Dentistry, 1992, p86)
Macrocyclic compounds analogous to CROWN ETHERS but which lack any OXYGEN atoms.
A polymer obtained by reacting polyacrylic acid with a special anion-leachable glass (alumino-silicate). The resulting cement is more durable and tougher than others in that the materials comprising the polymer backbone do not leach out.
Skills, techniques, standards, and principles used to improve the art and symmetry of the teeth and face to improve the appearance as well as the function of the teeth, mouth, and face. (From Boucher's Clinical Dental Terminology, 4th ed, p108)
A plant species of the family POACEAE that is widely cultivated for its edible seeds.
A normal developing tooth which has not yet perforated the oral mucosa or one that fails to erupt in the normal sequence or time interval expected for the type of tooth in a given gender, age, or population group.
The retention of a denture in place by design, device, or adhesion.
The hard portion of the tooth surrounding the pulp, covered by enamel on the crown and cementum on the root, which is harder and denser than bone but softer than enamel, and is thus readily abraded when left unprotected. (From Jablonski, Dictionary of Dentistry, 1992)
The largest and strongest bone of the FACE constituting the lower jaw. It supports the lower teeth.
Woody, usually tall, perennial higher plants (Angiosperms, Gymnosperms, and some Pterophyta) having usually a main stem and numerous branches.
Restorations of metal, porcelain, or plastic made to fit a cavity preparation, then cemented into the tooth. Onlays are restorations which fit into cavity preparations and overlay the occlusal surface of a tooth or teeth. Onlays are retained by frictional or mechanical factors.
The process of reuniting or replacing a broken or worn dental prosthesis or its part.
The relationship of all the components of the masticatory system in normal function. It has special reference to the position and contact of the maxillary and mandibular teeth for the highest efficiency during the excursive movements of the jaw that are essential for mastication. (From Jablonski, Dictionary of Dentistry, 1992, p556, p472)
An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing.
A prosthesis that gains its support, stability, and retention from a substructure that is implanted under the soft tissues of the basal seat of the device and is in contact with bone. (From Boucher's Clinical Dental Terminology, 4th ed)
Loss of the tooth substance by chemical or mechanical processes
The teeth collectively in the dental arch. Dentition ordinarily refers to the natural teeth in position in their alveoli. Dentition referring to the deciduous teeth is DENTITION, PRIMARY; to the permanent teeth, DENTITION, PERMANENT. (From Jablonski, Dictionary of Dentistry, 1992)
Hard, amorphous, brittle, inorganic, usually transparent, polymerous silicate of basic oxides, usually potassium or sodium. It is used in the form of hard sheets, vessels, tubing, fibers, ceramics, beads, etc.
Coloring, shading, or tinting of prosthetic components, devices, and materials.
Methods of preparing tissue specimens for visualization using an electron microscope, usually a scanning electron microscope. The methods involve the creation of exact copies of the specimens by making a mold or cast (i.e., replica) of the specimen.
The process of TOOTH formation. It is divided into several stages including: the dental lamina stage, the bud stage, the cap stage, and the bell stage. Odontogenesis includes the production of tooth enamel (AMELOGENESIS), dentin (DENTINOGENESIS), and dental cementum (CEMENTOGENESIS).
Devices, usually alloplastic, surgically inserted into or onto the jawbone, which support a single prosthetic tooth and serve either as abutments or as cosmetic replacements for missing teeth.
The 32 teeth of adulthood that either replace or are added to the complement of deciduous teeth. (Boucher's Clinical Dental Terminology, 4th ed)
The visually perceived property of objects created by absorption or reflection of specific wavelengths of light.
Preparation of TOOTH surfaces, and of materials bonded to teeth or DENTAL IMPLANTS, with agents and methods which roughen the surface to facilitate adhesion. Agents include phosphoric or other acids (ACID ETCHING, DENTAL) and methods include LASERS.