Surgical techniques on the CORNEA employing LASERS, especially for reshaping the CORNEA to correct REFRACTIVE ERRORS.

Surgical procedures employed to correct REFRACTIVE ERRORS such as MYOPIA; HYPEROPIA; or ASTIGMATISM. These may involve altering the curvature of the CORNEA; removal or replacement of the CRYSTALLINE LENS; or modification of the SCLERA to change the axial length of the eye.

Gas lasers with excited dimers (i.e., excimers) as the active medium. The most commonly used are rare gas monohalides (e.g., argon fluoride, xenon chloride). Their principal emission wavelengths are in the ultraviolet range and depend on the monohalide used (e.g., 193 nm for ArF, 308 nm for Xe Cl). These lasers are operated in pulsed and Q-switched modes and used in photoablative decomposition involving actual removal of tissue. (UMDNS, 2005)

The transparent anterior portion of the fibrous coat of the eye consisting of five layers: stratified squamous CORNEAL EPITHELIUM; BOWMAN MEMBRANE; CORNEAL STROMA; DESCEMET MEMBRANE; and mesenchymal CORNEAL ENDOTHELIUM. It serves as the first refracting medium of the eye. It is structurally continuous with the SCLERA, avascular, receiving its nourishment by permeation through spaces between the lamellae, and is innervated by the ophthalmic division of the TRIGEMINAL NERVE via the ciliary nerves and those of the surrounding conjunctiva which together form plexuses. (Cline et al., Dictionary of Visual Science, 4th ed)

An optical source that emits photons in a coherent beam. Light Amplification by Stimulated Emission of Radiation (LASER) is brought about using devices that transform light of varying frequencies into a single intense, nearly nondivergent beam of monochromatic radiation. Lasers operate in the infrared, visible, ultraviolet, or X-ray regions of the spectrum.

Lasers which use a solid, as opposed to a liquid or gas, as the lasing medium. Common materials used are crystals, such as YAG (YTTRIUM aluminum garnet); alexandrite; and CORUNDUM, doped with a rare earth element such as a NEODYMIUM; ERBIUM; or HOLMIUM. The output is sometimes additionally modified by addition of non-linear optical materials such as potassium titanyl phosphate crystal, which for example is used with neodymium YAG lasers to convert the output light to the visible range.

The use of green light-producing LASERS to stop bleeding. The green light is selectively absorbed by HEMOGLOBIN, thus triggering BLOOD COAGULATION.

Treatment using irradiation with LASER light of low power intensity so that the effects are not due to heat, as they are in LASER THERAPY.