An animal exposure system using ultrasonic nebulizer that generates well controlled aerosols from liquids.
(1/1876)
Various aerosol generators have been developed for animal inhalation experiments and the performance tests of measuring instruments and respirators. It has been, however, difficult to generate aerosols from an aqueous solution or suspension keeping the concentration and particle size distribution constant for a long time. Resolving such difficulties, the present study developed an animal exposure system that generates well-controlled and stable aerosols from liquids. The exposure system consists of an aerosol generator using ultrasonic nebulizer, a mixing chamber and an exposure chamber. The validity of this system was confirmed in the generation of NiCl2 and TiO2 aerosol from solution and suspension, respectively. The concentration levels of NiCl2 aerosol were kept at 3.2 mg/m3 and 0.89 mg/m3 for 5 hours with good coefficients of variation (CVs) of 2.5% and 1.7%, respectively. For TiO2 aerosol, the concentration levels of 1.59 mg/m3 and 0.90 mg/m3 were kept for 5 hours with small CVs of 1.3% and 2.0%, respectively. This exposure system could be sufficiently used for inhalation experiments with even high toxic aerosols such as NiCl2 because a momentary high concentration possibly affects results and an extremely stable concentration is required. (+info)
Induction of macrophage C-C chemokine expression by titanium alloy and bone cement particles.
(2/1876)
Particulate wear debris is associated with periprosthetic inflammation and loosening in total joint arthroplasty. We tested the effects of titanium alloy (Ti-alloy) and PMMA particles on monocyte/macrophage expression of the C-C chemokines, monocyte chemoattractant protein-1 (MCP-1), monocyte inflammatory protein-1 alpha (MIP-1alpha), and regulated upon activation normal T expressed and secreted protein (RANTES). Periprosthetic granulomatous tissue was analysed for expression of macrophage chemokines by immunohistochemistry. Chemokine expression in human monocytes/macrophages exposed to Ti-alloy and PMMA particles in vitro was determined by RT-PCR, ELISA and monocyte migration. We observed MCP-1 and MIP-1alpha expression in all tissue samples from failed arthroplasties. Ti-alloy and PMMA particles increased expression of MCP-1 and MIP-1alpha in macrophages in vitro in a dose- and time-dependent manner whereas RANTES was not detected. mRNA signal levels for MCP-1 and MIP-1alpha were also observed in cells after exposure to particles. Monocyte migration was stimulated by culture medium collected from macrophages exposed to Ti-alloy and PMMA particles. Antibodies to MCP-1 and MIP-1alpha inhibited chemotactic activity of the culture medium samples. Release of C-C chemokines by macrophages in response to wear particles may contribute to chronic inflammation at the bone-implant interface in total joint arthroplasty. (+info)
Coating titanium implants with bioglass and with hydroxyapatite. A comparative study in sheep.
(3/1876)
This study compares the osteointegration of titanium implants coated with bioglass (Biovetro GSB formula) and with hydroxyapatite (HAP). Twenty-four bioglass-coated and 24 HAP-coated cylinders were implanted in the femoral diaphyses of sheep, and examined after 2, 4, 6, 8, 12, and 16 weeks. The HAP coating gave a stronger and earlier fixation to the bone than did bioglass. Bioglass formed a tissue interface which showed a macrophage reaction with little new bone formation activity. In contrast, HPA, showed intense new bone formation, with highly mineralised osseous trabeculae in the neighbourhood of the interface. (+info)
Role of the scavenger receptor MARCO in alveolar macrophage binding of unopsonized environmental particles.
(4/1876)
Alveolar macrophages (AMs) avidly bind and ingest unopsonized environmental particles and bacteria through scavenger-type receptors (SRs). AMs from mice with a genetic deletion of the major macrophage SR (types AI and AII; SR-/-) showed no decrease in particle binding compared with SR+/+ mice, suggesting that other SRs are involved. To identify these receptors, we generated a monoclonal antibody (mAb), PAL-1, that inhibits hamster AM binding of unopsonized particles (TiO2, Fe2O3, and latex beads; 66 +/- 5, 77 +/- 2, and 85 +/- 2% inhibition, respectively, measured by flow cytometry). This antibody identifies a protein of approximately 70 kD on the AM surface (immunoprecipitation) that is expressed by AMs and other macrophages in situ. A cDNA clone encoding the mAb PAL-1-reactive protein isolated by means of COS cell expression was found to be 84 and 77% homologous to mouse and human scavenger receptor MARCO mRNA, respectively. Transfection of COS cells with MARCO cDNA conferred mAb-inhibitable TiO2 binding. Hamster MARCO also mediates AM binding of unopsonized bacteria (67 +/- 5 and 47 +/- 4% inhibition of Escherichia coli and Staphylococcus aureus binding by mAb PAL-1). A polyclonal antibody to human MARCO identified the expected approximately 70-kD band on Western blots of lysates of normal bronchoalveolar lavage (BAL) cells (>90% AMs) and showed strong immunolabeling of human AMs in BAL cytocentrifuge preparations and within lung tissue specimens. In normal mouse AMs, the anti-MARCO mAb ED31 also showed immunoreactivity and inhibited binding of unopsonized particles (e.g., TiO2 approximately 40%) and bacteria. The novel function of binding unopsonized environmental dusts and pathogens suggests an important role for MARCO in the lungs' response to inhaled particles. (+info)
Titanium aneurysm clips: mechanical characteristics and clinical trial.
(5/1876)
Titanium clip is well documented to reduce the artifact observed in computed tomography (CT) or magnetic resonance (MR) imaging and improve the quality of these images. There are, however, some demerits based on metallic characteristics including large spring portions, lack of long and fenestration clips, and difficulties to produce. We examined the mechanical characteristics of Sugita titanium aneurysm clips (product of 6 aluminium-4 vanadium-titanium) and investigate the safety in clinical use and the imaging quality compared with those of cobalt (Co) alloy clips. On mechanical test, Sugita titanium clips showed no significant difference in closing force compared with the conventional Co alloy clips. The closing force reduced about 10% after 100 times repeated opening in titanium clips in contrast with no remarkable changes in Co alloy clips. Sixty-four patients with ruptured or unruptured cerebral aneurysms (total number of 71 aneurysms) were treated with Sugita titanium clips through the microsurgical technique. None of the unfavorable outcome occurred in related to the titanium clips. Neither clip dislocation nor deformation was experienced in this series during the follow-up period. The clip artifacts seen in CT and MR image were markedly reduced, however, MR angiography had less quality to resolve anatomical structures due to an existence of vessel gap. These results indicate that in spite of some disadvantages, Sugita titanium clips allow safe and beneficial use routinely in aneurysm surgery insofar as the complete clipping is obtained. (+info)
Intra-oral temperature variation over 24 hours.
(6/1876)
This study aimed to investigate temperature variation at archwire sites adjacent to the maxillary right central incisor and first premolar, its correlation with ambient temperature, and the influence of inter-racial variation. Twenty young adult male subjects were randomly selected (13 Asian, seven Caucasian). Thermocouples were attached to the labial archwire component of custom-made orthodontic retainers at the two intra-oral sites. A third thermocouple measured ambient temperature. A data-logger recorded temperatures at 5-second intervals over a 24-hour period. Temperatures ranged from 5.6 to 58.5 degrees C at the incisor and from 7.9 to 54 degrees C at the premolar, with medians of 34.9 degrees C and 35.6 degrees C, respectively. Ambient temperature correlated poorly with the intra-oral temperatures. The Asian and Caucasian groups had significantly different temperature distributions. On average during the 24-hour period, temperatures at the incisor site were in the range of 33-37 degrees C for 79 per cent of the time, below it for 20 per cent, and above it for only 1 per cent of the time. Corresponding figures for the premolar site were 92, 6, and 2 per cent. At both archwire sites the most frequent temperatures were in the range of 35-36 degrees C. The data presented demonstrate that the temperature at sites on an archwire in situ varies considerably over a 24-hour period and that racial differences may exist. This information should be considered during the manufacture and use of temperature-sensitive orthodontic materials, in particular nickel-titanium archwires and springs. (+info)
The effect of hydroxyapatite coating on the bonding of bone to titanium implants in the femora of ovariectomised rats.
(7/1876)
We have studied the effect of hydroxyapatite (HA) coating in 15 ovariectomised and 15 normal rats which had had a sham procedure. Twenty-four weeks after operation, HA-coated implants were inserted into the intramedullary canal of the right femur and uncoated implants into the left femur. The prostheses were removed four weeks after implantation. Twelve specimens in each group had mechanical push-out tests. Sagittal sections of the other three were evaluated by SEM. The bone mineral density (BMD) of the dissected left tibia was measured by dual-energy x-ray absorptiometry. The difference in BMD between the control and ovariectomised tibiae was 35.01 mg/cm2 (95% CI, 26.60 to 43.42). The push-out strength of the HA-coated implants was higher than that of the uncoated implants in both groups (p < 0.0001), but the HA-coated implants of the ovariectomised group had a reduction in push-out strength of 40.3% compared with the control group (p < 0.0001). Our findings suggest that HA-coated implants may improve the fixation of a cementless total hip prosthesis but that the presence of osteoporosis may limit the magnitude of this benefit. (+info)
Bactericidal activity of photocatalytic TiO(2) reaction: toward an understanding of its killing mechanism.
(8/1876)
When titanium dioxide (TiO(2)) is irradiated with near-UV light, this semiconductor exhibits strong bactericidal activity. In this paper, we present the first evidence that the lipid peroxidation reaction is the underlying mechanism of death of Escherichia coli K-12 cells that are irradiated in the presence of the TiO(2) photocatalyst. Using production of malondialdehyde (MDA) as an index to assess cell membrane damage by lipid peroxidation, we observed that there was an exponential increase in the production of MDA, whose concentration reached 1.1 to 2.4 nmol. mg (dry weight) of cells(-1) after 30 min of illumination, and that the kinetics of this process paralleled cell death. Under these conditions, concomitant losses of 77 to 93% of the cell respiratory activity were also detected, as measured by both oxygen uptake and reduction of 2,3,5-triphenyltetrazolium chloride from succinate as the electron donor. The occurrence of lipid peroxidation and the simultaneous losses of both membrane-dependent respiratory activity and cell viability depended strictly on the presence of both light and TiO(2). We concluded that TiO(2) photocatalysis promoted peroxidation of the polyunsaturated phospholipid component of the lipid membrane initially and induced major disorder in the E. coli cell membrane. Subsequently, essential functions that rely on intact cell membrane architecture, such as respiratory activity, were lost, and cell death was inevitable. (+info)